White Rose University Consortium logo
University of Leeds logo University of Sheffield logo York University logo

Browse by Academic Unit (A-Z)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0 [feed] RSS 2.0 Altmetric
Group by: Creators Name | Item Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 194.

A

Ahmadi, A. and Beck, S.B.M. (2005) Development of the orifice plate with a cone swirler flow conditioner. Sensor Review, 25 (1). pp. 63-68. ISSN 02602288

Al-Atabi, M., Chin, S.B., Beck, S.B.M. and Boucher, R.F. (2007) From cystic duct to static mixer: A serendipitous journey via flow visualization. Journal of Visualization, 10 (2). pp. 141-144. ISSN 1343-8875

Al-Shahrany, A.S., Bradley, D., Lawes, M., Liu, K. and Woolley, R. (2006) Darrieus-landau and thermo-acoustic instabilities in closed vessel explosions. Combustion Science and Technology, 178 (10 & 11). pp. 1771-1802. ISSN 1563-521X

Allum, S.R., Tomlinson, R.A. and Joshi, R. (2008) The impact of loads on standard diameter, small diameter and mini implants: A comparative laboratory study. Clinical Oral Implants Research, 19 (6). pp. 553-559. ISSN 0905-7161

Anthistle, T. and Fletcher, D. I. (2012) Modelleing blast loads in rail vehicles. In: Structures Under Shock and Impact XII, WIT Transactions on The Built Environment. Structures Under Shock and Impact 2012, 4 - 6 September 2012, Kos, Greece. Wessex Institute of Technology . ISBN 978-1-84564-612-7

Arias-Cuevas, O., Li, Z., Lewis, R. and Gallardo-Hernandez, E.A. (2010) Rolling-sliding laboratory tests of friction modifiers in dry and wet wheel-rail contacts. Wear, 268 (3-4). pp. 543-551. ISSN 0043-1648

B

Barber, S., Chin, S.B. and Carré, M.J. (2009) Sports ball aerodynamics: A numerical study of the erratic motion of soccer balls. Computers and Fluids, 38 (6). pp. 1091-1100. ISSN 0045-7930

Batterbee, D.C. and Sims, N.D. (2005) Vibration isolation with smart fluid dampers: a benchmarking study. Smart Structures and Systems, 1 (3). pp. 235-256. ISSN 1738-1991

Batterbee, D.C., Sims, N.D., Stanway, R. and Rennison, M. (2007) Magnetorheological landing gear: 2. Validation using experimental data. Smart Materials and Structures, 16 (6). pp. 2441-2452. ISSN 0964-1726

Batterbee, D. and Sims, N.D. (2009) Temperature sensitive controller performance of MR dampers. Journal of Intelligent Material Systems and Structures, 20 (3). pp. 297-309. ISSN 1045-389X

Batterbee, D.C. and Sims, N.D. (2007) Hardware-in-the-loop simulation of magnetorheological dampers for vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 221 (2). pp. 265-278. ISSN 0959-6518

Batterbee, D.C., Sims, N.D., Stanway, R. and Wolejsza, Zbigniew (2007) Magnetorheological landing gear: 1. A design methodology. Smart Materials and Structures, 16 (6). pp. 2429-2440. ISSN 0964-1726

Beck, S.B.M., Bagshaw, N.M. and Yates, J.R. (2005) Explicit equations for leak rates through narrow cracks. International Journal of Pressure Vessels and Piping, 82 (7). pp. 565-570. ISSN 0308-0161

Beck, S.B.M., Curren, M.D., Sims, N.D. and Stanway, R. (2005) Pipeline network features and leak detection by cross-correlation analysis of reflected waves. Journal of Hydraulic Engineering, 131 (8). pp. 715-723. ISSN 07339429

Bishop, SR, Wagg, DJ and Xu, D (1998) Use of control to maintain period-1 motions during wind-up or wind-down operations of an impacting driven beam. Chaos, Solitons and Fractals, 9 (1-2). 261 - 269. ISSN 0960-0779

Blakey, S.G. and Beck, S.B.M. (2004) Energy consumption and capacity utilization of galvanizing furnaces. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 218 (4). pp. 251-259. ISSN 2041-3009

Boldetti, C., Pinna, C., Howard, I. C. and Gutierrez, G. (2005) Measurement of deformation gradients in hot rolling of AA3004. Experimental Mechanics, 45 (6). pp. 517-525. ISSN 00144851

Boldetti, C., Pinna, C. and Howard, I.C. (2006) Measurement and prediction of deformation in plane strain compression tests of AA5182. Materials Science and Technology, 22 (11). pp. 1380-1386. ISSN 0267-0836

Bradley, D., Lawes, M., Liu, K., Verhelst, S. and Woolley, R. (2007) Laminar burning velocities of lean hydrogen-air mixtures at pressures up to 1.0 MPa. Combustion and Flame, 149 (1-2). pp. 162-172. ISSN 0010-2180

Bradley, D., Sheppard, C.G.W., Suardjaja, I.M. and Woolley, R. (2004) Fundamentals of high-energy spark ignition with lasers. Combustion and Flame, 138 (1-2). pp. 55-77. ISSN 0010-2180

C

Camacho, J., Lewis, R. and Dwyer-Joyce, R.S. (2007) Wear of a chute in a rice sorting machine. Wear, 263 (1 - 6). pp. 65-73. ISSN 0043-1648

Cambon, C., Godeferd, F.S., Nicolleau, F.C.G.A. and Vassilicos, J.C. (2004) Turbulent diffusion in rapidly rotating flows with and without stable stratification. Journal of Fluid Mechanics, 499. pp. 231-255. ISSN 0022-1120

Carrè, M. J., Goodwill, S. R. and Haake, S. J. (2005) Understanding the effect of seams on the aerodynamics of an association football. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (7). pp. 657-666. ISSN 0954-4062

Chia, C M., Rongong, J.A. and Worden, K. (2009) Strategies for using cellular automata to locate constrained layer damping on vibrating structures. Journal of Sound and Vibration, 319 (1-2). pp. 119-139. ISSN 0022-460X

Chia, C.M., Rongong, J.A. and Worden, K. (2008) Evolution of constrained layer damping using a cellular automaton algorithm. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (4). pp. 585-597. ISSN 0954-4062

Clarke, J., Carre, M.J., Damm, L. and Dixon, S. (2013) The development of an apparatus to understand the traction developed at the shoe-surface interface in tennis. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 227 (3). 149 - 160. ISSN 1754-3371

Clarke, J., Carré, M.J., Dixon, S.J. and Damm, L. (2013) The effect of normal load force and roughness on the dynamic traction developed at the shoe-surface interface in tennis. Sports Engineering, 16 (3). 165 - 171. ISSN 1369-7072

Cross, EJ, Manson, G, Worden, K and Pierce, SG (2012) Features for damage detection with insensitivity to environmental and operational variations. Proceedings of the Royal Society A, 468 (2148). 4098 - 4122. ISSN 1364-5021

D

Danao, L.A., Edwards, J., Eboibi, O. and Howell, R.J. (2014) A numerical investigation into the influence of unsteady wind in the performance of a vertical axis wind turbine. Applied Energy, 116. pp. 111-124. ISSN 0306-2619

Di­az, F.A., Patterson, E.A., Tomlinson, R.A. and Yates, J.R. (2004) Measuring stress intensity factors during fatigue crack growth using thermoelasticity. Fatigue and Fracture of Engineering Materials and Structures, 27 (7). pp. 571-584. ISSN 8756-758X

Dwyer-Joyce, R.S. (2005) The application of ultrasonic NDT techniques in tribology. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (5). pp. 347-366. ISSN 1350-6501

Dwyer-Joyce, R.S. (2005) The life cycle of a debris particle. Tribology and Interface Engineering Series, 48. pp. 681-690. ISSN 15723364

Dwyer-Joyce, R.S. and Hankinson, N. (2006) An ultrasonic technique for the measurement of elastic properties of soft surface coatings. Tribology International, 39 (4). pp. 326-331. ISSN 0301679X

Dwyer-Joyce, R.S., Harper, P. and Drinkwater, B.W. (2004) A method for the measurement of hydrodynamic oil films using ultrasonic reflection. Tribology Letters, 17 (2). pp. 337-348. ISSN 1573-2711

Dwyer-Joyce, R.S., Harper, P., Pritchard, J. and Drinkwater, B.W. (2006) Oil film measurement in polytetrafluoroethylene-faced thrust pad bearings for hydrogenerator applications. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 220 (6). pp. 619-628. ISSN 0957-6509

Dwyer-Joyce, R.S., Reddyhoff, T. and Drinkwater, B. (2004) Operating limits for acoustic measurement of rolling bearing oil film thickness. Tribology Transactions, 47 (3). pp. 366-375. ISSN 10402004

Dwyer-Joyce, R.S., Drinkwater, B.W. and Donohoe, C.J. (2003) The measurement of lubricant-film thickness using ultrasound. Proceedings of the Royal Society Series A: Mathematical Physical and Engineering Sciences, 459 (2032). pp. 957-976. ISSN 1471-2946

Dwyer-Joyce, R.S., Lewis, R., Gao, N. and Grieve, D.G. (2003) Wear and Fatigue of Railway Track Caused by Contamination, Sanding and Surface Damage. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Sheel Systems : CM2003. CHARMEC , Gothenburg , pp. 211-220. ISBN 9163139286

Dwyer-Joyce, R.S., Reddyhoff, T. and Drinkwater, B. (2004) Operating Limits for Acoustic Measurement of Rolling Bearing Oil Film Thickness. Tribology Transactions, 47 (3). pp. 366-375. ISSN 1547-397X

Dwyer-Joyce, R.S., Reddyhoff, T. and Zhu, J. (2011) Ultrasonic Measurement for Film Thickness and Solid Contact in Elastohydrodynamic Lubrication. Journal of Tribology, 133 (3). Art. No. 031501. ISSN 1350-6501

E

Ellis, A, Wallace, M and Twyman, L.J (2013) Exploiting dense shell/packing principles to invoke stereoselectivity in a reaction accelerated by a chiral dendrimer. Chemical Communications, 49 (73). 8063 - 8065. ISSN 1359-7345

F

Fahmy, M., Sharples, S. and Yahiya, M. (2010) LAI based trees selection for mid latitude urban developments: A microclimatic study in Cairo, Egypt. Building and Environment , 45 (2). pp. 345-357. ISSN 0360-1323

Fairweather, M., Ormsby, M.P., Sheppard, C.G.W. and Woolley, R. (2009) Turbulent burning rates of methane and methane-hydrogen mixtures. Combustion and Flame, 156 (4). pp. 780-790. ISSN 00102180

Fletcher, D. I. (2012) A new two-dimensional model of rolling-sliding contact creep curves for a range of lubrication types. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 227 (6). pp. 539-537. ISSN 1350-6501

Fletcher, D. I. and Lewis, S. (2013) Creep curve measurement to support wear and adhesion modelling, using a continuously variable creep twin disc machine. Wear, 298. pp. 57-65. ISSN 0043-1648

Fricker, Thomas E., Oakley, Jeremy E., Sims, Neil D. and Worden, Keith (2011) Probabilistic uncertainty analysis of an FRF of a structure using a Gaussian process emulator. Mechanical Systems and Signal Processing, 25 (8). pp. 2962-2975. ISSN 0888-3270

G

Gallardo-Hernandez, E.A. and Lewis, R. (2008) Twin disc assessment of wheel/rail adhesion. Wear, 265 (9-10). pp. 1309-1316. ISSN 0043-1648

Garnham, John E, Fletcher, David I, Davis, Claire L and Franklin, Francis J (2011) Visualisation and modelling to understand rail rolling contact fatigue cracks in three-dimensions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 225 (2). pp. 165-178. ISSN 0954-4097

Gawthrop, P.J, Neild, S.A and Wagg, D.J (2012) Semi-active damping using a hybrid control approach. Journal of Intelligent Material Systems and Structures, 23 (18). pp. 2103-2116.

Gawthrop, P.J., Neild, S.A., Gonzalez-Buelga, A. and Wagg, D.J. (2009) Causality in real-time dynamic substructure testing. Mechatronics, 19 (7). 1105 - 1115. ISSN 0957-4158

Gawthrop, P.J., Neild, S.A., Wallace, M.I. and Wagg, D.J. (2007) Robust real-time substructuring techniques for under-damped systems. Structural Control and Health Monitoring, 14. 591 - 608. ISSN 1545-2255

Gawthrop, P.J., Virden, D.W., Neild, S.A. and Wagg, D.J. (2008) Emulator-based control for actuator-based hardware-in-the-loop testing. Control Engineering Practice, 16 (8). 897 - 908. ISSN 0967-0661

Gawthrop, P.J., Virden, D.W., Neild, S.A. and Wagg, D.J. (2008) Emulator-based control for actuator-based hardware-in-the-loop testing. Control Engineering Practice, 16 (8). 897 - 908. ISSN 0967-0661

Gawthrop, P.J., Wagg, D.J. and Neild, S.A. (2009) Bond graph based control and substructuring. Simulation Modelling Practice and Theory, 17 (1). 211 - 227. ISSN 1569-190X

Gawthrop, P.J., Wallace, M.I. and Wagg, D.J. (2005) Bond-graph based substructuring of dynamical systems. Earthquake Engineering and Structural Dynamics., 34 (6). 687 - 703. ISSN 0098-8847

Ghadbeigi, H., Bradbury, S.R., Pinna, C. and Yates, J.R. (2008) Determination of micro-scale plastic strain caused by orthogonal cutting. International Journal of Machine Tools and Manufacture, 48 (2). pp. 228-235. ISSN 0890-6955

Gibson, S., Tomlinson, R.A. and Jewell, G.W. (2006) Full-field pulsed magneto-photoelasticity – Experimental Implementation. Journal of Strain Analysis for Engineering Design, 41 (2). pp. 171-182. ISSN 0309-3247

Gibson, S., Tomlinson, R.A. and Jewell, G.W. (2006) Full-field pulsed-magneto-photoelasticity - a description of the instrument. Journal of Strain Analysis for Engineering Design, 41 (2). pp. 161-170. ISSN 0309-3247

Gonzalez-Buelga, A., Neild, S.A., Wagg, D.J. and Macdonald, J.H.G. (2008) Modal stability of inclined cables subjected to vertical support excitation. Journal of Sound and Vibration, 318 (3). 565 - 579. ISSN 0022-460X

Gonzalez-Buelga, A., Wagg, D.J. and Neild, S.A. (2007) Parametric variation of a coupled pendulum-oscillator system using real-time dynamic substructuring. Structural Control and Health Monitoring, 14 (7). 991 - 1012.

Gonzalez-Valadez, M., Baltazar, A. and Dwyer-Joyce, R.S. (2010) Study of interfacial stiffness ratio of a rough surface in contact using a spring model. Wear, 268 (3-4). pp. 373-379. ISSN 0043-1648

Gonzalez-Valadez, M., Dwyer-Joyce, R.S. and Lewis, R. (2005) Ultrasonic reflection from mixed liquid-solid contacts and the determination of interface stiffness. Tribology and Interface Engineering Series, 48. pp. 313-320. ISSN 15723364

Grassie, Stuart L, Fletcher, David I, Gallardo Hernandez, Ezequiel Alberto and Summers, Paul (2011) "Studs": a squat-type defect in rails. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 226 (3). pp. 243-256. ISSN 0954-4097

Green, D.A., Lewis, R. and Dwyer-Joyce, R.S. (2006) Wear effects and mechanisms of soot-contaminated automotive lubricants. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 220 (3). pp. 159-169. ISSN 1350-6501

Green, P. L., Worden, K., Atallah, K. and Sims, N. D. (2012) The benefits of Duffing-type nonlinearities and electrical optimisation of a mono-stable energy harvester under white Gaussian excitations. Journal of Sound and Vibration, 331 (20). pp. 4504-4517. ISSN 0022-460X

Green, P.L, Worden, K and Sims, N.D (2013) On the identification and modelling of friction in a randomly excited energy harvester. Journal of Sound and Vibration, 332 (19). 4696 - 4708. ISSN 0022-460X

H

H-Gangaraj, S.M., Alvandi-Tabrizi, Y., Farrahi, G.H., Majzoobi, G.H. and Ghadbeigi, H. (2011) Finite element analysis of shot-peening effect on fretting fatigue parameters. Tribology International, 44 (11). pp. 1583-1588. ISSN 0301-679X

Harper, P., Dwyer-Joyce, R.S., Sjodin, U. and Olofsson, U. (2005) Evaluation of an ultrasonic method for measurement of oil film thickness in a hydraulic motor piston ring. Tribology and Interface Engineering Series, 48. pp. 305-312. ISSN 15723364

Hernandez-Castillo, L. E., Beynon, J. H., Pinna, C. and Van Der Zwaag, S. (2005) Micro-scale strain distribution in hot-worked duplex stainless steel. Steel Research International, 76 (2-3). pp. 137-141. ISSN 1611-3683

Hodzic, A, Ayvar-Soberanis, S, Merson, E and Merino-Pérez, JL (2014) The Applicability of Taylor’s Model to the Drilling of CFRP Using Uncoated WC-Co Tools: The Influence of Cutting Speed on Tool Wear. International Journal of Machining and Machinability of Materials, 16. ISSN 1748-5711 (In Press)

Howell, R., Qin, N., Edwards, J. and Durrani, N. (2010) Wind tunnel and numerical study of a small vertical axis wind turbine. Renewable Energy, 35 (2). pp. 412-422. ISSN 0960-1481

Howell, R.J., Walker, S., Hodgson, P. and Griffin, A. (2013) Tidal energy machines: A comparative life cycle assessment. Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment. Published online before print November 7, 2013. ISSN 1475-0902 (In Press)

Huyanan, S. and Sims, N.D. (2007) Vibration control strategies for proof-mass actuators. Journal of Vibration and Control, 13 (12). pp. 1785-1806. ISSN 1077-5463

J

Jumahat, A., Soutis, C., Jones, F.R. and Hodzic, A. (2010) Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading. Composite Structures, 92 (2). pp. 295-305. ISSN 0263-8223

K

Kasolang, S. and Dwyer-Joyce, R.S. (2008) Viscosity measurement in thin lubricant films using shear ultrasonic reflection. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 222 (3). pp. 423-429. ISSN 13506501

Kasolang, S., Ahmad, M.A. and Dwyer-Joyce, R.S. (2011) Measurement of circumferential viscosity profile in stationary journal bearing by shear ultrasonic reflection. Tribology International.

Katerelos, D.T.G., Kashtalyan, M., Soutis, C. and Galiotis, C. (2008) Matrix cracking in polymeric composites laminates: Modelling and experiments. Composites Science and Technology, 68 (12). pp. 2310-2317. ISSN 0266-3538

Kyrychko, Y.N., Blyuss, K.B., Gonzalez-Buelga, A., Hogan, S.J. and Wagg, D.J. (2006) Real-time dynamic substructuring in a coupled oscillator-pendulum system. Proceedings of the Royal Society A, 462. 1271 - 1294. ISSN 1364-5021

Kyrychko, Y.N., Hogan, S.J., Gonzalez-Buelga, A. and Wagg, D.J. (2007) Modelling real-time dynamic substructuring using partial delay differential equations. Proceedings of the Royal Society of London A, 463 (2082). 1509-1523. . ISSN 0080-4630 (Submitted)

L

Lawes, M., Lee, Y., Mokhtar, A.S. and Woolley, R. (2008) Laser ignition of iso-octane air aerosols. Combustion Science and Technology, 180 (2). pp. 296-313. ISSN 00102202

Lawes, M., Ormsby, M.P., Sheppard, C.G.W. and Woolley, R. (2005) Variation of turbulent burning rate of methane, methanol, and iso-octane air mixtures with equivalence ratio at elevated pressure. Combustion Science and Technology, 177 (7). pp. 1273-1289. ISSN 1563-521X

Lawes, M., Ormsby, M.P., Sheppard, C.G.W. and Woolley, R. (2012) The turbulent burning velocity of iso-octane/air mixtures. Combustion and Flame, 159 (5). pp. 1949-1959. ISSN 0010-2180

Lewis, R. (2009) Friction in a hydraulic motor piston/cam roller contact lined with PTFE impregnated. Wear, 266 (7-8). pp. 888-892. ISSN 0043-1648

Lewis, R., Barber, S.C. and Dwyer-Joyce, R.S. (2007) Particle motion and stain removal during simulated abrasive tooth cleaning. Wear, 263 (1-6 SPEC. ISS.). pp. 188-197. ISSN 0043-1648

Lewis, R. and Dwyer-Joyce, R.S. (2004) Wear mechanisms and transitions in railway wheel steels. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 218 (6). pp. 467-478. ISSN 1350-6501

Lewis, R. and Dwyer-Joyce, R.S. (2005) Wear of human teeth: a tribological perspective. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 1-18. ISSN 1350-6501

Lewis, R., Dwyer-Joyce, R.S. and Pickles, M.J. (2004) Interaction between toothbrushes and toothpaste abrasive particles in simulated tooth cleaning. Wear, 257 (3-4). pp. 368-376. ISSN 00431648

Lewis, R., Dwyer-Joyce, R.S., Slatter, T. and Brooks, A. (2004) Valve recession: From experiment to predictive model. VDI Berichte (1813). pp. 79-93. ISSN 0083-5560

Lewis, R., Marshall, M.B. and Dwyer-Joyce, R.S. (2005) Measurement of interface pressure in interference fits. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (2). pp. 127-139. ISSN 0954-4062

Lewis, R., Barber, S.C. and Dwyer-Joyce, R.S. (2007) Particle motion and stain removal during simulated abrasive tooth cleaning. Wear, 263 (1 - 6). pp. 188-197. ISSN 0043-1648

Lewis, R., Braghin, F., Ward, A., Bruni, S., Dwyer-Joyce, R.S., Bel Knani, K. and Bologna, P. (2003) Integrating Dynamics and Wear Modelling to Predict Railway Wheel Profile Evolution. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 7-16. ISBN 9163139286

Lewis, R. and Dwyer-Joyce, R.S. (2003) Combating automative engine valve recession. Tribology and Lubrication Technology, 59 (10). pp. 48-51. ISSN 0024-7154

Lewis, R. and Dwyer-Joyce, R.S. (2006) Interactions between toothbrush and toothpaste particles during simulated abrasive cleaning. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of engineering tribology, 220 (8). pp. 755-765. ISSN 1350-6501

Lewis, R., Dwyer-Joyce, R.S., Bruni, S., Ekberg, A., Cavalletti, M. and Bel Knani, K. (2004) A new CAE procedure for railway wheel tribological design. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)

Lewis, R., Dwyer-Joyce, R.S. and Lewis, J. (2003) Wheel/Rail Contact Isolation Due to Track Contamination. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 221-230. ISBN 9163139286

Lewis, R., Dwyer-Joyce, R.S., Olofsson, U. and Hallam, R.I. (2004) Wheel material wear mechanisms and transitions. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)

Lewis, R., Dwyer-Joyce, R.S. and Pickles, M.J. (2004) Interaction between toothbrushes and toothpaste abrasive particles in simulated tooth cleaning. Wear, 257 (3-4). pp. 368-376. ISSN 0043-1648

Lewis, R. and Olofsson, U. (2004) Mapping rail wear regimes and transitions. Wear, 257 (7-8). pp. 721-729. ISSN 0043-1648

Lewis, R. and Olofsson, U. (2003) Mapping rail wear transitions. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 165-174. ISBN 9163139286

Lewis, R., Tsoraki, C., Broughton, J., Cripps, J.C., Afodun, S.A., Slatter, T. and Roubos, V. (2011) Abrasive and impact wear of stone used to manufacture axes in Neolithic Greece. Wear, 271 (9-10). pp. 2549-2560. ISSN 0043-1648

Lewis, R., Yoxall, A., Canty, L.A. and Romo, E.R. (2007) Development of engineering design tools to help reduce apple bruising. Journal of Food Engineering, 83 (3). pp. 356-365. ISSN 0260-8774

Lewis, R., Yoxall, A., Marshall, M.B. and Canty, L.A. (2007) Characterising pressure and bruising in apple fruit. Wear, 264 (1-2). pp. 37-46. ISSN 0043-1648

Liu, W., Tomlinson, G.R. and Rongong, J.A. (2005) The dynamic characterisation of disk geometry particle dampers. Journal of Sound and Vibration, 280 (3-5). pp. 849-861. ISSN 0022-460X

Lockett, R.D. and Woolley, R. (2007) Instabilities and soot formation in high-pressure, rich, iso-octane-air explosion flames: 1. Dynamical structure. Combustion and Flame, 151 (4). pp. 601-622. ISSN 0010-2180

Lovelace, R., Beck, S., Watson, M. and Wild, A. (2011) Assessing the energy implications of replacing car trips with bicycle trips in Sheffield, UK. Energy Policy , 39 (4). pp. 2075-2087. ISSN 0301-4215

Lu, B., Ou, H. and Long, H. (2011) Die shape optimisation for net-shape accuracy in metal forming using direct search and localised response surface methods. Structural and Multidisciplinary Optimization, 44 (4). 529- 545. ISSN 1615-147X

M

Mann, B.P. and Sims, N.D. (2010) On the performance and resonant frequency of electromagnetic induction energy harvesters. Journal of Sound and Vibration, 329 (9). pp. 1348-1361. ISSN 0022-460X

Mann, B.P. and Sims, N.D. (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration, 319 (1-2). pp. 515-530. ISSN 0022-460X

Marhsall, M.B., Lewis, R., Dwyer-Joyce, R.S., Demilly, F. and Flament, Y. (2004) Ultrasonic characterisation of wheel hub/axle interference fit pressures. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)

Marhsall, M.B., Lewis, R., Dwyer-Joyce, R.S., Olofsson, O. and Bjorklund, S. (2004) Measuring wheel/rail contact stresses using ultrasound. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)

Marshall, M.B., Lewis, R., Drinkwater, B.W. and Dwyer-Joyce, R.S. (2004) An ultrasonic approach for contact stress mapping in machine joints and concentrated contacts. Journal of Strain Analysis for Engineering Design, 39 (4). pp. 339-350. ISSN 0309-3247

Marshall, M.B., Lewis, R. and Dwyer-Joyce, R.S. (2006) Characterisation of contact pressure distribution in bolted joints. Strain, 42 (1). pp. 31-43. ISSN 00392103

Marshall, M.B., Lewis, R., Dwyer-Joyce, R.S., Olofsson, U. and Björklund, S. (2006) Experimental characterization of wheel-rail contact patch evolution. Journal of Tribology, 128 (3). pp. 493-504. ISSN 0742 4787

Marsico, M.R, Tzanov, V, Wagg, D.J, Neild, S.A and Krauskopf, B (2011) Bifurcation analysis of a parametrically excited inclined cable close to two-to-one internal resonance. Journal of Sound and Vibration, 330. pp. 6023-6035.

Merino Perez, J.L., Hodzic, A., Ayvar, S. and Merson, E. (2014) The effect of heat during short ageing periods on the mechanical properties of CFRP composites. In: ECCM16 – 16 The European Conference on Composite Materials; Proceedings of. ECCM16 – 16 The European Conference on Composite Materials, 22-26 June 2014, Seville, Spain. . ISBN 84-616-9798-7

Michelitsch, T.M., Maugin, G.A., Nicolleau, F.C.G.A., Nowakowski, A.F. and Derogar, S. (2009) Dispersion relations and wave operators in self-similar quasicontinuous linear chains. Physical Review -Series E, 80 (1). Art no.011135. ISSN 1539-3755

Michelitsch, T.M., Maugin, G.A., Nowakowski, A.F. and Nicolleau, F.C.G.A. (2009) Analysis of the vibrational mode spectrum of a linear chain with spatially exponential properties. International Journal of Engineering Science, 47 (2). pp. 209-220. ISSN 0020-7225

Mills, R., Dwyer-Joyce, R.S. and Loo-Morrey, M. (2009) The mechanisms of pedestrian slip on flooring contaminated with solid particles. Tribology International, 42 (3). pp. 403-412. ISSN 0301679X

Morales, A.L., Rongong, J.A. and Sims, N.D. (2012) A finite element method for active vibration control of uncertain structures. Mechanical Systems and Signal Processing, 32. pp. 79-93. ISSN 0888-3270

Muhamad, P., Sims, N. and Worden, K. (2012) On the orthogonalised reverse path method for nonlinear system identification. Journal of Sound and Vibration, 331 (20). pp. 4488-4503. ISSN 0022-460X

N

Neild, S.A and Wagg, D.J (2011) Applying the method of normal forms to second-order nonlinear vibration problems. Proceedings of the Royal Society of London A, 467. 1141-1163 .

Neild, S.A and Wagg, D.J (2013) A generalized frequency detuning method for multidegree-of-freedom oscillators with nonlinear stiffness. Nonlinear Dynamics, 73 (1-2). pp. 649-663.

Nicolleau, F. and Yu, G. (2007) Turbulence with combined stratification and rotation: Limitations of Corrsin's hypothesis. Physical Review E, 76. 066302. ISSN 1550-2376

Nicolleau, F., Yu, G. and Vassilicos, J.C. (2008) Kinematic simulation for stably stratified and rotating turbulence. Fluid Dynamics Research, 40 (1). pp. 68-93. ISSN 0169-5983

Nicolleau, F.C.G.A. and Elmaihy, A. (2004) Study of the development of three-dimensional sets of fluid particles and iso-concentration fields using kinematic simulation. Journal of Fluid Mechanics, 517. pp. 229-249. ISSN 0022-1120

Nicolleau, F.C.G.A. and Nowakowski, A.F. (2011) Presence of a Richardson's regime in kinematic simulations. Physical Review E, 83 (5). Art no. e19858. ISSN 1539-3755

P

Patterson, E.A., Hack, E., Brailly, P., Burguete, R.L., Saleem, Q., Siebert, T., Tomlinson, R.A. and Whelan, M.P. (2007) Calibration and evaluation of optical systems for full-field strain measurement. Optics and Lasers in Engineering, 45 (5). pp. 550-564. ISSN 0143-8166

Peng, Z.K., Jackson, M.R., Rongong, J.A., Chu, F.L. and Parkin, R.M. (2009) On the energy leakage of discrete wavelet transform. Mechanical Systems and Signal Processing, 23 (2). pp. 330-343. ISSN 0888-3270

Peng, Z.K., Lang, Z.Q., Billings, S.A. and Tomlinson, G.R. (2008) Comparisons between harmonic balance and nonlinear output frequency response function in nonlinear system analysis. Journal of Sound and Vibration, 311 (1-2). pp. 56-73. ISSN 0022-460X

Pombo, J., Ambrosio, J., Pereira, M., Lewis, R., Dwyer-Joyce, R.S., Ariaudo, C. and Kuka, N. (2010) A study on wear evaluation of railway wheels based on multibody dynamics and wear computation. Multibody System Dynamics, 24 (3). pp. 347-366. ISSN 1384-5640

Powell, J. and Fletcher, D. I. (2011) The need for developing an effective and acceptable engineering response to terrorist attacks on railway systems. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 225 (4). pp. 359-371. ISSN 09544097

R

Reddyhoff, T., Dwyer-Joyce, R.S. and Harper, P. (2008) A new approach for the measurement of film thickness in liquid face seals. Tribology Transactions, 51 (2). pp. 140-149. ISSN 10402004

Reddyhoff, T., Dwyer-Joyce, R.S., Zhang, J. and Drinkwater, B.W. (2007) Auto-calibration of ultrasonic lubricant-film thickness measurements. Measurement Science and Technology, 19 (4). Art. No. 045402. ISSN 0957-0233

Reddyhoff, T., Kasolang, S., Dwyer-Joyce, R.S. and Drinkwater, B.W. (2005) The phase shift of an ultrasonic pulse at an oil layer and determination of film thickness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (6). pp. 387-400. ISSN 1350-6501

Rongong, J.A., Goruppa, A.A., Buravalla, V.R., Tomlinson, G.R. and Jones, F.R. (2004) Plasma deposition of constrained layer damping coatings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218 (7). pp. 669-680. ISSN 0954-4062

Rongong, J.A. and Kazakoff, A.B. (2006) Computer modelling of the dynamic response of viscoelastic vibroisolators. Engineering Mechanics, 13 (1). pp. 19-30. ISSN 1210-2717

S

Scroggs, R.A., Beck, S.B.M. and Patterson, E.A. (2004) An integrated approach to modelling the fluid-structure interaction of a collapsible tube. JSME International Journal, Series B: Fluids and Thermal Engineering, 47 (1). pp. 20-28. ISSN 1340-8054

Serrano, C., Hernández, J.J., Mandilas, C., Sheppard, C.G.W. and Woolley, R. (2008) Laminar burning behaviour of biomass gasification-derived producer gas. International Journal of Hydrogen Energy, 33 (2). pp. 851-862. ISSN 03603199

Shati, A.K.A., Blakey, S.G. and Beck, S.B.M. (2011) The effect of surface roughness and emissivity on radiator output. Energy and Buildings, 43 (2-3). pp. 400-406. ISSN 0378-7788

Shaw, A.D., Neild, S.A., Wagg, D.J. and Weaver, P.M. (2012) Single source three dimensional capture of full field plate vibrations. Experimental Mechanics, 52 (7). 965 - 974. ISSN 0014-4851

Sieber, J., Gonzalez-Buelga, A., Neild, S.A., Wagg, D.J. and Krauskopf, B. (2008) Experimental continuation of periodic orbits through a fold. Physical Review Letters, 100. 244101 - 244101. ISSN 0031-9007

Sieber, J., Wagg, D.J. and Adhikari, S. (2008) On the interaction of exponential non-viscous damping with symmetric nonlinearities. Journal of Sound and Vibration, 314 (1-2). 1 - 11. ISSN 0022-460X

Sims, N.D. (2006) Limit cycle behavior of smart fluid dampers under closed loop control. Journal of Vibration and Acoustics, Transactions of the ASME, 128 (4). pp. 413-428. ISSN 1528-8927

Sims, N.D. (2005) The self-excitation damping ratio: A chatter criterion for time-domain milling simulations. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 127 (3). pp. 433-445. ISSN 1087-1357

Sims, N.D. (2007) Vibration absorbers for chatter suppression: A new analytical tuning methodology. Journal of Sound and Vibration, 301 (3-5). pp. 592-607. ISSN 0022-460X

Sims, N.D., Manson, G. and Mann, B.P. (2010) Fuzzy stability analysis of regenerative chatter in milling. Journal of Sound and Vibration, 329 (8). pp. 1025-1041. ISSN 0022-460X

Sims, N.D., Mann, B. and Huyanan, S. (2008) Analytical prediction of chatter stability for variable pitch and variable helix milling tools. Journal of Sound and Vibration, 317 (3-5). pp. 664-686. ISSN 0022-460X

Sims, N.D. and Turner, S. (2011) The influence of feed rate on process damping in milling: Modelling and experiments. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 225 (6). pp. 799-810. ISSN 0954-4054

Skaropoulou, A., Tsivilis, S., Kakali, G., Sharp, J. and Swamy, R. (2009) Thaumasite form of sulfate attack in limestone cement mortars: A study on long term efficiency of mineral admixtures. Construction and Building Materials, 23 (6). pp. 2338-2345. ISSN 0950-0618

Slatter, T., Taylor, H., Lewis, R. and King, P. (2009) The influence of laser hardening on wear in the valve and valve seat contact. Wear, 267 (5-8). pp. 797-806. ISSN 00431648

Sturge, D., While, A. and Howell, R.J. (2013) Engineering and energy yield the missing dimension of wind turbine assessment. Energy Policy, 65. pp. 245-250. ISSN 0301-4215

Swamy, R.N. (2008) High performance cement based materials and holistic design for sustainability in construction (Part I). The Indian Concrete Journal.

Swamy, R.N. (2008) Sustainable Concrete for the 21st Century Concept of Strength through Durability. Japan Society of Civil Engineers Concrete Committee Newsletter, 13.

T

Taghvaei, M., Beck, S.B.M. and Staszewski, W.J. (2007) Leak detection in pipeline networks using low-profile piezoceramic transducers. Structural Control and Health Monitoring, 14 (8). pp. 1063-1082. ISSN 15452255

Tassini, N., Quost, X., Lewis, R., Dwyer-Joyce, R.S., Ariaudo, C. and Kuka, N. (2010) A numerical model of twin disc test arrangement for the evaluation of railway wheel wear prediction methods. Wear, 268 (5-6). pp. 660-667. ISSN 0043-1648

Taylor, C.M., Turner, S. and Sims, N.D. (2010) Chatter, process damping, and chip segmentation in turning: A signal processing approach. Journal of Sound and Vibration, 329 (23). pp. 4922-4935. ISSN 0022-460X

Taylor, C M, Turner, S, Papatheou, E and Sims, N D (2012) Modelling of segmentation-driven vibration in machining. International Journal of Advanced Manufacturing Technology, 23 (7). pp. 827-835. ISSN 0268-3768

Theodorakopoulos, D.D. and Swamy, R.N. (2008) A design model for punching shear of FRP-reinforced slab-column connections. Cement and Concrete Composites, 30 (6). pp. 544-555. ISSN 0958-9465

Theodorakopoulos, D.D. and Swamy, R.M. (2007) Analytical model to predict the punching shear strenth of FRP reinforced concrete flat slabs. ACI Structural Journal, 104 (3).

Tomlinson, R.A. and Marsavina, L. (2004) Thermoelastic investigations for fatigue life assessment. Experimental Mechanics, 44 (5). pp. 487-494. ISSN 0014-4851

Tomlinson, R.A., Pugh, D. and Beck, S.B.M. (2006) Experiment and modelling of birefringent flows using commercial CFD code. International Journal of Heat and Fluid Flow, 27 (6). pp. 1054-1060. ISSN 0142727X

Tomlinson, S.E., Lewis, R., Liu, X., Texier, C. and Carre, M.J. (2011) Understanding the friction mechanisms between the human finger and flat contacting surfaces in moist conditions. Tribology Letters, 41 (1). pp. 283-294. ISSN 1023-8883

U

Ura, D, Clarke, J and Carré, M (2013) Effect of shoe orientation on shoe-surface traction in tennis. Footwear Science, 5 (SUPPL.). ISSN 1942-4280

Uryga-Bugajska, I, Borman, DJ, Pourkashanian, M, Catalanotti, E and Wilson, C (2011) Theoretical investigation of the performance of alternative aviation fuels in an aero-engine combustion chamber. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (8). pp. 874-885. ISSN 0954-4100

V

Virden, D. and Wagg, D.J. (2005) System identification of a mechanical system with impacts using model reference adaptive control. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 219. 121 - 132. ISSN 0959-6518

W

Wagg, D.J and Neild, S.A (2011) A review of non-linear structural control techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225. 759 - 770. ISSN 0954-4062

Wagg, D.J. (2003) Adaptive control of nonlinear dynamical systems using a model reference approach. Meccanica, 38 (2). 227 - 238. ISSN 0025-6455

Wagg, D.J. (2006) Multiple nonsmooth events in multi-degree-of-freedom vibro-impact systems. Nonlinear Dynamics, 43 (1-2). 137-148 . ISSN 0924-090X

Wagg, D.J. (2002) Partial synchronization of non-identical chaotic systems via adaptive control, with applications to modelling coupled nonlinear systems. International Journal of Bifurcation and Chaos, 12 (3). 561 - 570.

Wagg, D.J. (2003) Periodic and chaotic dynamics in an asymmetric elastoplastic oscillator. Chaos, Solitons and Fractals, 16 (5). 779 - 786. ISSN 0960-0779

Wagg, D.J. (2005) Periodic sticking motion in a two-degree of freedom impact oscillator. International Journal of Non-Linear Mechanics, 40 (8). 1076 - 1087. ISSN 0020-7462

Wagg, D.J. (2004) Rising phenomena and the multi-sliding bifurcation in a two-degree of freedom impact oscillator. Chaos, Solitons and Fractals, 22. 541 - 548. ISSN 0960-0779

Wagg, D.J. (2007) A note on coefficient of restitution models including the effects of impact induced vibration. Journal of Sound and Vibration, 300 (3-5). 1071 - 1078. ISSN 0022-460X

Wagg, D.J. (2004) A note on using the collocation method for modelling the dynamics of a flexible continuous beam subject to impacts. Journal of Sound and Vibration, 276 (3-5). 1128 - 1134. ISSN 1541-0161

Wagg, D.J. and Bishop, S.R. (2002) Application of nonsmooth modelling techniques to the dynamics of a flexible impacting beam. Journal of Sound and Vibration, 256 (5). 803 - 820. ISSN 0022-460X

Wagg, D.J. and Bishop, S.R. (2001) Chatter, sticking and chaotic impacting motion in a two-degree of freedom impact oscillator. International Journal of Bifurcation and Chaos, 11. 57 - 71. ISSN 0218-1274

Wagg, D.J. and Bishop, S.R. (2004) Dynamics of a two degree of freedom vibro-impact system with multiple motion limiting constraints. International Journal of Bifurcation and Chaos, 14. 119 - 140. ISSN 0218-1274

Wagg, D.J. and Bishop, S.R. (2000) A note on modelling multi-degree of freedom vibro-impact systems using coefficient of restitution models. Journal of Sound and Vibration, 236 (1). 176 - 184. ISSN 0022-460X

Wagg, D.J., Karpodinis, G. and Bishop, S.R. (1999) An experimental study of the impulse response of a vibro-impacting cantilever beam. Journal of Sound and Vibration, 228 (2). 243 - 264. ISSN 0022-460X

Wagg, D.J. and Stoten, D.P. (2001) Substructuring of dynamical systems via the adaptive minimal control synthesis algorithm. Earthquake Engineering and Structural Dynamics, 30 (6). 865 - 877. ISSN 0098-8847

Wallace, M.I., Wagg, D.J. and Neild, S.A. (2005) An adaptive polynomial based forward prediction algorithm for multi-actuator real-time dynamic substructuring. Proceedings of the Royal Society of London A., 461 (2064). 3807 - 3826. ISSN 1364-5021

Wallace, M.I., Wagg, D.J., Neild, S.A., Bunnis, P.C., Lieven, N.A. and Crewe, A.J. (2007) Testing coupled rotor blade-lag damper vibration dynamics using real-time dynamic substructuring. Journal of Sound and Vibration, 307 (3-5). 737 - 754. ISSN 0022-460X

Wong, C.X., Daniel, M.C. and Rongong, J.A. (2009) Energy dissipation prediction of particle dampers. Journal of Sound and Vibration, 319 (1-2). pp. 91-118. ISSN 0022-460X

Y

Yang, H., Gibson, S. and Tomlinson, R.A. (2006) Improvement of Fourier Polarimetry for applications in tomographic photoelasticity. Experimental Mechanics, 46 (5). pp. 619-626. ISSN 0014-4851

Yang, L., Neild, S.A., Wagg, D.J. and Virden, D.W. (2006) Model reference adaptive control of a nonsmooth dynamical system. Nonlinear Dynamics, 46 (3). 323 - 335. ISSN 0924-090X

Yates, J.R., Zanganeh, M., Tomlinson, R.A., Brown, M.W. and Garrido, F.A.D. (2008) Crack paths under mixed mode loading. Engineering Fracture Mechanics, 75 (3-4). pp. 319-330. ISSN 0013-7944

Yates, J.R., Zanganeh, M., Tomlinson, R.A., Brown, M.W. and Diaz Garrido, F.A. (2008) Crack paths under mixed mode loading. Engineering Fracture Mechanics, 75 (3-4). pp. 319-330. ISSN 0013-7944

Yusoff, A., Turner, M.S., Taylor, C.M. and Sims, N.D. (2010) The role of tool geometry in process damped milling. The International Journal of Advanced Manufacturing Technology, 50 (9-12). pp. 883-895. ISSN 1433-3015

Yusoff, A.R. and Sims, N.D. (2011) Optimisation of variable helix tool geometry for regenerative chatter mitigation. International Journal of Machine Tools and Manufacture, 51 (2). pp. 133-141. ISSN 0890-6955

Z

Zanganeh, M., Tomlinson, R.A. and Yates, J.R. (2008) T-stress determination using thermoelastic stress analysis. Journal of Strain Analysis for Engineering Design, 43 (6). pp. 529-537. ISSN 2041-3130

Zhang, J., Drinkwater, B.W. and Dwyer-Joyce, R.S. (2006) Acoustic measurement of lubricant-film thickness distribution in ball bearings. Journal of the Acoustical Society of America, 119 (2). pp. 863-871. ISSN 0001-4966

Zhang, J., Drinkwater, B.W. and Dwyer-Joyce, R.S. (2005) Calibration of the ultrasonic lubricant-film thickness measurement technique. Measurement Science and Technology, 16 (9). pp. 1784-1791. ISSN 0957-0233

Zhang, J., Drinkwater, B.W. and Dwyer-Joyce, R.S. (2006) Monitoring of lubricant film failure in a ball bearing using ultrasound. Journal of Tribology, 128 (3). pp. 612-618. ISSN 0742-4787

Zhang, J., Drinkwater, B.W. and Dwyer-Joyce, R.S. (2007) Ultrasonic oil-film thickness measurement: An angular spectrum approach to assess performance limits. Journal of the Acoustical Society of America, 121 (5). pp. 2612-2620. ISSN 00014966

This list was generated on Thu Jul 24 21:26:39 2014 BST.