Browse by Academic Unit (A-Z)
- White Rose Consortium (128361)
- The University of Sheffield (49815)
- Faculty of Engineering (Sheffield) (13229)
- The University of Sheffield (49815)
B
Braun, M.R., Beck, S.B.M. and Altan, H. (2014) Using regression analysis to predict the future energy consumption of a supermarket in the UK. Applied Energy, 130. 305 - 313. ISSN 0306-2619
D
Devine, M. orcid.org/0009-0000-9633-1733, Bajpai, A., Ó Brádaigh, C.M. et al. (1 more author) (2024) ‘Resin welding’: a novel route to joining acrylic composite components at room temperature. Composites Part B: Engineering, 272. 111212. ISSN 1359-8368
F
Flanagan, M. orcid.org/0000-0002-8119-7647, Doyle, A., Doyle, K. et al. (7 more authors) (2019) Comparative manufacture and testing of induction- welded and adhesively bonded carbon fibre PEEK stiffened panels. Journal of Thermoplastic Composite Materials, 32 (12). pp. 1622-1649. ISSN 0892-7057
Flanagan, M., Grogan, D.M., Goggins, J. et al. (4 more authors) (2017) Permeability of carbon fibre PEEK composites for cryogenic storage tanks of future space launchers. Composites Part A: Applied Science and Manufacturing, 101. pp. 173-184. ISSN 1359-835X
Floreani, C., Cuthill, F., Steynor, J. et al. (7 more authors) (2021) Wind blade demonstrator: testing of 6m hybrid glass/carbon fibre powder epoxy composite wind blade demonstrator. SAMPE Journal, 57 (3). pp. 6-14. ISSN 0091-1062
Floreani, C., Robert, C. orcid.org/0000-0001-5035-6134, Alam, P. orcid.org/0000-0001-9122-9369 et al. (2 more authors) (2021) Mixed-mode interlaminar fracture toughness of glass and carbon fibre powder epoxy composites—for design of wind and tidal turbine blades. Materials, 14 (9). 2103. ISSN 1996-1944
H
Hadjittofis, E., Vargas, S.M., Litster, J.D. orcid.org/0000-0003-4614-3501 et al. (1 more author) (2021) Τhe role of surface energy in the apparent solubility of two different calcite crystal habits. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2252). 20210200. ISSN 1364-5021
J
Jones, R.P. and Owens, D.H. (1980) Numerical Optimisation of Multipass Processes. Research Report. ACSE Report 133 . Department of Control Engineering, University of Sheffield, Mappin Street, Sheffield
K
Kennedy, C.R., Jaksic, V. orcid.org/0000-0002-0178-5546, Leen, S.B. et al. (1 more author) (2018) Fatigue life of pitch- and stall-regulated composite tidal turbine blades. Renewable Energy, 121. pp. 688-699. ISSN 0960-1481
L
Lyu, Y. orcid.org/0000-0002-6989-9304, Wu, J., Zhang, H. et al. (2 more authors) (2023) Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites. Journal of Composite Materials. ISSN 0021-9983
M
Maguire, J.M., Nayak, K. and Ó Brádaigh, C.M. (2018) Characterisation of epoxy powders for processing thick-section composite structures. Materials & Design, 139. pp. 112-121. ISSN 0264-1275
Maguire, J.M., Nayak, K. and Ó Brádaigh, C.M. (2020) Novel epoxy powder for manufacturing thick-section composite parts under vacuum-bag-only conditions. Part II: Experimental validation and process investigations. Composites Part A: Applied Science and Manufacturing, 136. 105970. ISSN 1359-835X
Maguire, J.M., Simacek, P., Advani, S.G. et al. (1 more author) (2020) Novel epoxy powder for manufacturing thick-section composite parts under vacuum-bag-only conditions. Part I: Through-thickness process modelling. Composites Part A: Applied Science and Manufacturing, 136. 105969. ISSN 1359-835X
Mamalis, D. orcid.org/0000-0002-3129-4270, Flanagan, T. and Ó Brádaigh, C.M. (2018) Effect of fibre straightness and sizing in carbon fibre reinforced powder epoxy composites. Composites Part A: Applied Science and Manufacturing, 110. pp. 93-105. ISSN 1359-835X
Mamalis, D. orcid.org/0000-0002-3129-4270, Floreani, C. and Ó Brádaigh, C.M. (2021) Influence of hygrothermal ageing on the mechanical properties of unidirectional carbon fibre reinforced powder epoxy composites. Composites Part B: Engineering, 225. 109281. ISSN 1359-8368
Murray, B.R., Doyle, A., Feerick, P.J. et al. (3 more authors) (2017) Rotational moulding of PEEK polymer liners with carbon fibre/PEEK over tape-placement for space cryogenic fuel tanks. Materials & Design, 132. pp. 567-581. ISSN 0264-1275
Murray, B.R., Leen, S.B., Semprimoschnig, C.O.A. et al. (1 more author) (2016) Helium permeability of polymer materials as liners for composite overwrapped pressure vessels. Journal of Applied Polymer Science, 133 (29). 43675. ISSN 0021-8995
Murray, J.J. orcid.org/0000-0003-4725-6655, Bajpai, A. orcid.org/0000-0003-1117-7437, Quinn, J. orcid.org/0000-0002-3904-3943 et al. (4 more authors) (2022) Effect of glass fibre sizing on the interfacial properties of composites produced using in-situ polymerised Polyamide-6 transfer moulding. Composites Part B: Engineering, 235. 109743. ISSN 1359-8368
O
Obande, W., O'Rourke, K. orcid.org/0000-0003-0874-3733, Stankovic, D. orcid.org/0000-0002-4203-9515 et al. (4 more authors) (2024) Multi-stage, in-situ polymerisation for low-exotherm, liquid resin infusion of thick thermoplastic laminates at room temperature. Composites Communications, 45. 101788. ISSN 2452-2139
Obande, W., Ray, D. and Ó Brádaigh, C.M. (2019) Viscoelastic and drop-weight impact properties of an acrylic-matrix composite and a conventional thermoset composite – a comparative study. Materials Letters, 238. pp. 38-41. ISSN 0167-577X
Obande, W., Ó Brádaigh, C.M. and Ray, D. orcid.org/0000-0002-2353-9581 (2021) Continuous fibre-reinforced thermoplastic acrylic-matrix composites prepared by liquid resin infusion – a review. Composites Part B: Engineering, 215. 108771. ISSN 1359-8368
Obande, W. orcid.org/0000-0001-7367-7272, Ó Brádaigh, C.M. and Ray, D. orcid.org/0000-0002-2353-9581 (2020) Thermoplastic hybrid-matrix composite prepared by a room-temperature vacuum infusion and in-situ polymerisation process. Composites Communications, 22. 100439. ISSN 2452-2139
O’Rourke, K. orcid.org/0000-0003-0874-3733, Wurzer, C., Murray, J. et al. (6 more authors) (2022) Diverted from landfill: reuse of single-use plastic packaging waste. Polymers, 14 (24). 5485. ISSN 2073-4360
P
Palmer, J., Curtis, D. orcid.org/0000-0001-6402-6996, Novovic, D. et al. (1 more author) (2018) The influence of abrasive grit morphology on wheel topography and grinding performance. In: Monostori, L., Stepan, G. and Bachrathy, D., (eds.) Procedia CIRP. 8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 Jun 2018, Budapest, Hungary. Elsevier , pp. 239-242.
Pashneh-Tala, S., Moorehead, R. and Claeyssens, F. (2020) Hybrid manufacturing strategies for tissue engineering scaffolds using methacrylate functionalised poly(glycerol sebacate). Journal of Biomaterials Applications, 34 (8). pp. 1114-1130. ISSN 0885-3282
Pitt, K. and Hounslow, M.J. orcid.org/0000-0003-0439-3641 (2015) Aggregation of growing crystals in suspension: II. Poiseuille flow crystalliser. Chemical Engineering Science, 122. pp. 384-394. ISSN 0009-2509
Pérez-Martín, H. orcid.org/0000-0003-4769-8744, Buchalik-Bopp, S., Guettler, B.E. et al. (4 more authors) (2023) Effect of crystallinity and morphology on the mechanical properties of CF/PEKK composites manufactured under compression moulding and automated tape placement. Materials Today Communications, 36. 106442. ISSN 2352-4928
Pérez-Martín, H., Mackenzie, P., Baidak, A. et al. (2 more authors) (2021) Crystallinity studies of PEKK and carbon fibre/PEKK composites: a review. Composites Part B: Engineering, 223. 109127. ISSN 1359-8368
Pérez-Martín, H. orcid.org/0000-0003-4769-8744, Mackenzie, P., Baidak, A. et al. (2 more authors) (2023) Microstructural and micromechanical property characterisation of CF/PEKK composites using nanoindentation. Materials & Design, 234. 112359. ISSN 0264-1275
R
Robert, C. orcid.org/0000-0001-5035-6134, Pecur, T. orcid.org/0000-0003-2267-1115, Maguire, J.M. et al. (3 more authors) (2020) A novel powder-epoxy towpregging line for wind and tidal turbine blades. Composites Part B: Engineering, 203. 108443. ISSN 1359-8368
S
Shen, M., Zhang, Y., Xu, H. et al. (1 more author) (2021) MOFs based on the application and challenges of perovskite solar cells. iScience, 24 (9). 103069.
W
Wang, L.G., Morrissey, J.P., Barrasso, D. et al. (5 more authors) (2021) Model driven design for twin screw granulation using mechanistic-based population balance model. International Journal of Pharmaceutics, 607. 120939. ISSN 0378-5173
Wang, L.G., Pradhan, S.U., Wassgren, C. et al. (3 more authors) (2020) A breakage kernel for use in population balance modelling of twin screw granulation. Powder Technology, 363. pp. 525-540. ISSN 0032-5910
Y
Yu, X., Hounslow, M.J. orcid.org/0000-0003-0439-3641 and Reynolds, G.K. (2016) Representing spray zone with cross flow as a well-mixed compartment in a high shear granulator. Powder Technology, 297. pp. 429-437. ISSN 0032-5910
Yu, X., Hounslow, M.J. orcid.org/0000-0003-0439-3641, Reynolds, G.K. et al. (3 more authors) (2017) A compartmental CFD-PBM model of high shear wet granulation. AIChE Journal, 63 (2). pp. 438-458. ISSN 0001-1541
Z
Zhang, H., Wu, J., Robert, C. orcid.org/0000-0001-5035-6134 et al. (2 more authors) (2022) 3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites. Composites Part B: Engineering, 234. 109687. ISSN 1359-8368
Zhao, J., Utton, C. and Tsakiropoulos, P. orcid.org/0000-0001-7548-3287 (2020) On the microstructure and properties of Nb-12Ti-18Si-6Ta-2.5W-1Hf (at.%) silicide-based alloys with Ge and Sn additions. Materials, 13 (7). 1778.
Ç
Çelik, M. orcid.org/0000-0003-3083-739X, Noble, T., Haseeb, A. et al. (3 more authors) (2022) Contact resistance heating of unidirectional carbon fibre tows in a powder-epoxy towpregging line. Plastics, Rubber and Composites, 51 (8). pp. 383-392. ISSN 1465-8011
Çelik, M., Noble, T., Jorge, F. et al. (3 more authors) (2022) Influence of line processing parameters on properties of carbon fibre epoxy towpreg. Journal of Composites Science, 6 (3). 75. ISSN 2504-477X