Browse by Academic Unit (A-Z)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items at this level: 236.

A

Agbro, E, Materego, M, Lawes, M et al. (1 more author) (2015) Low temperature ignition properties of n-butanol: key uncertainties and constraints. In: HMCS. 7th European Combustion Meeting, 30 Mar - 02 Apr 2015, Budapest, Hungary. Laboratory of Heterogeneous Mixtures and Combustion Systems .

Agbro, E, Tomlin, AS, Lawes, M et al. (2 more authors) (2017) The Influence of n-Butanol Blending on the Ignition Delay Times of Gasoline and Its Surrogate at High Pressures. Fuel, 187. pp. 211-219. ISSN 0016-2361

Al-Anii, Y, Almaneea, A, Kapur, N et al. (2 more authors) (2016) Effect of Processor Layout on the Thermal Performance of Fully Immersed Liquid-Cooled Microelectronics. In: WIT Transactions on Engineering Sciences. 8th International Conference on Computational and Experimental Methods in Multiphase and Complex Flow, 20-22 Apr 2015, Valencia, Spain. WIT Press . ISBN 9781845649463

Al-Asadi, MT, Alkasmoul, FS and Wilson, MCT (2016) Heat transfer enhancement in a micro-channel cooling system using cylindrical vortex generators. International Communications in Heat and Mass Transfer, 74. pp. 40-47. ISSN 0735-1933

Al-Damook, A, Kapur, N orcid.org/0000-0001-8266-5038, Summers, JL et al. (1 more author) (2016) Computational Design and Optimisation of Pin Fin Heat Sinks with Rectangular Perforations. Applied Thermal Engineering, 105. pp. 691-703. ISSN 1359-4311

Al-Damook, A, Kapur, N, Summers, JL et al. (1 more author) (2015) An experimental and computational investigation of thermal air flows through perforated pin heat sinks. Applied Thermal Engineering, 89. 365 - 376. ISSN 1359-4311

Al-Damook, A, Summers, JL, Kapur, N et al. (1 more author) (2016) Effect of Different Perforations Shapes on the Thermal-hydraulic Performance of Perforated Pinned Heat Sinks. Journal of Multidisciplinary Engineering Science and Technology, 3 (4). JMESTN42351495. pp. 4466-4474. ISSN 2458-9403

Al-Damook, A, Summers, JL, Kapur, N et al. (1 more author) (2016) Effect of temperature-dependent air properties on the accuracy of numerical simulations of thermal airflows over pinned heat sinks. International Communications in Heat and Mass Transfer, 78. pp. 163-167. ISSN 0735-1933

Al-Mughanam, T, Bradley, D, Lawes, M et al. (1 more author) (2015) Burning Velocity Blending Laws for Methane/Air and Hydrogen/Air Blends. In: 25th International Colloquium on the Dynamics of Explosions and Reactive systems, 2015, 02-07 Aug 2015, Leeds, UK.

Al-Neama, AF, Kapur, N orcid.org/0000-0003-1041-8390, Summers, J orcid.org/0000-0001-8266-5038 et al. (1 more author) (2017) An experimental and numerical investigation of the use of liquid flow in serpentine microchannels for microelectronics cooling. Applied Thermal Engineering, 116. pp. 709-723. ISSN 1359-4311

Al-Sallami, W, Al-Damook, A and Thompson, HM (2016) A Numerical Investigation of Thermal Airflows over Strip Fin Heat Sinks. International Communications in Heat and Mass Transfer, 75. pp. 183-191. ISSN 0735-1933

Aleiferis, PG, van Romunde, ZR, Larson, G et al. (2 more authors) (2015) On the effect of ambient turbulence and thermodynamic conditions on fuel spray development for direct-injection spark-ignition engines. Flow, Turbulence and Combustion. ISSN 1386-6184

Almaneea, A, Thompson, HM, Summers, JL et al. (1 more author) (2014) Cooling system analysis for a data center using liquid immersed servers. International Journal of Thermal Technologies, 4 (3). pp. 200-207.

Alqaraghuli, W, Alkhafagiy, D and Shires, A (2014) Simulation of the flow inside an annular can combustor. International Journal of Engineering and Technology, 3 (3). 2499. 357 - 364. ISSN 2227-524X

Anggono, W, Wardana, I, Lawes, M et al. (3 more authors) (2013) Laminar burning velocity and flammability characteristics of biogas in spark ignited premix combustion at reduced pressure. Applied Mechanics and Materials, 376. 79 - 85. ISSN 1660-9336

Anggono, W, Wardana, I, Lawes, M et al. (2 more authors) (2016) The Behaviour of Biogas Containing Carbon Dioxide in Spark Ignited Premix Combustion at Various Pressures. In: Proceeding of the 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015 (ICE-SEAM 2015). 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015 (ICE-SEAM 2015), 11-12 Nov 2015, Solo, Indonesia. AIP . ISBN 978-0-7354-1365-8

Anggono, W, Wardana, ING, Lawes, M et al. (4 more authors) (2013) Biogas laminar burning velocity and flammability characteristics in spark ignited premix combustion. Journal of Physics: Conference Series, 423 (1). ISSN 1742-6588

Arteaga, A, Ruprecht, D orcid.org/0000-0003-1904-2473 and Krause, R (2015) A stencil-based implementation of Parareal in the C++ domain specific embedded language STELLA. Applied Mathematics and Computation, 267. pp. 727-741. ISSN 0096-3003

B

Bagdanavicius, A, Bowen, PJ, Bradley, D et al. (2 more authors) (2015) Stretch Rate Effects and Flame Surface Densities in Premixed Turbulent Combustion up to 1.25 MPa. Combustion and Flame, 162 (11). 4158 - 4166. ISSN 0010-2180

Bardin, ME, El-Dein Hussin, AMTA, Gushchin, PA et al. (2 more authors) (2014) Technical aspects of ethyl tert-butyl ether (ETBE) for large-scale use as gasoline improver. Energy Technology, 2 (2). 194 - 204.

Barrett, RS, Lichtwark, GA, Armstrong, C et al. (3 more authors) (2015) Fluoroscopic Assessment of Lumbar Total Disc Replacement Kinematics During Walking. Spine, 40 (7). pp. 436-442. ISSN 0362-2436

Bates, L orcid.org/0000-0002-5601-7288 and Bradley, D (2017) Deflagrative, Auto-ignitive, and Detonative Propagation Regimes in Engines. Combustion and Flame, 175. pp. 118-122. ISSN 0010-2180

Bates, L, Bradley, D, Paczko, G et al. (1 more author) (2015) Engine Hot Spots: Decay, Deflagration, Auto-Ignitive Propagation, or Detonation ? In: 25th International Colloquium on the Dynamics of Explosions and Reactive Systems, 02-07 Aug 2015, Leeds.

Bates, L, Bradley, D, Paczko, G et al. (1 more author) (2016) Engine Hot Spots: Modes of Auto-ignition and Reaction Propagation. Combustion and Flame, 166. pp. 80-85. ISSN 0010-2180

Beadling, AR, Bryant, M, Dowson, D et al. (1 more author) (2016) Tribocorrosion of hard-on-hard total hip replacements with metal and ceramic counterfaces under standard and adverse loading conditions. Tribology International, 103. pp. 359-367. ISSN 0301-679X

Bierbrauer, F, Kapur, N and Wilson, MCT (2013) Drop Pinch-Off for Discrete Flows from a Capillary. ESAIM: Proceedings, 40. pp. 16-33. ISSN 1270-900X

Borg, M, Shires, A and Collu, M (2014) Offshore floating vertical axis wind turbines, dynamics modelling state of the art. Part I: Aerodynamics. Renewable and Sustainable Energy Reviews, 39. 1214 - 1225. ISSN 1364-0321

Bou-Francis, A, López, A, Persson, C et al. (2 more authors) (2014) Assessing cement injection behaviour in cancellous bone: an in vitro study using flow models. Journal of Biomaterials Applications, 29 (4). pp. 582-594. ISSN 0885-3282

Bou-Francis, A, Soyka, RPW, Ferguson, SJ et al. (2 more authors) (2015) Novel methodology for assessing biomaterial-biofluid interaction in cancellous bone. Journal of the Mechanical Behavior of Biomedical Materials, 46. pp. 158-167. ISSN 1751-6161

Bradley, D (2016) Fundamentals of Lean Combustion. In: Dunn-Rankin, D and Therkelsen, P, (eds.) Lean Combustion: Technology and Control. Elsevier , pp. 21-61. ISBN 9780128045572

Bradley, D, Gaskell, PH, Gu, X et al. (1 more author) (2016) Jet flame heights, lift-off distances, and mean flame surface density for extensive ranges of fuels and flow rates. Combustion and Flame, 164. pp. 400-409. ISSN 0010-2180

Bradley, D, Lawes, M, Liao, S et al. (1 more author) (2014) Laminar mass burning and entrainment velocities and flame instabilities of i-octane, ethanol and hydrous ethanol/air aerosols. Combustion and Flame, 161 (6). pp. 1620-1632. ISSN 0010-2180

Bradley, D, Lawes, M, Liu, K et al. (1 more author) (2013) Measurements and correlations of turbulent burning velocities over wide ranges of fuels and elevated pressures. Proceedings of the Combustion Institute, 34 (1). 1519 - 1526. ISSN 1540-7489

Bradley, D, Lawes, M and Mansour, MS (2009) Explosion bomb measurements of ethanol-air laminar gaseous flame characteristics at pressures up to 1.4 MPa. Combustion and Flame, 156 (7). 1462 - 1470. ISSN 0010-2180

Bradley, D, Lawes, M and Materego, M (2015) Interpretation of Auto-ignition Delay Times Measured in Different Rapid Compression Machines. In: 25th International Colloquium on the Dynamics of Explosions and Reactive systems, 2015, 02-07 Aug 2015, Leeds.

Bradley, D, Lawes, M and Mumby, R (2017) Burning Velocity and Markstein Length Blending Laws for Methane/Air and Hydrogen/Air Blends. Fuel, 187. pp. 268-273. ISSN 0016-2361

Bradley, D, Lawes, M and Mumby, R (2016) Cellular Flame Instabilities. In: Chao, J, Molkov, V, Sunderland, P, Tamanini, F and Torero, J, (eds.) Proceedings of 8th International Seminar on Fire & Explosion Hazards. 8th International Seminar on Fire & Explosion Hazards, 25-28 Apr 2016, Hefei- China. USTC Press . (In Press)

Bradley, D., Lawes, M. and Mansour, M.S. (2008) Flame surface densities during spherical turbulent flame explosions. Proceedings of the Combustion Institute, 32 (1). pp. 1587-1593. ISSN 1540-7489

Brady, GA, Kapur, N, Summers, JL et al. (1 more author) (2013) A case study and critical assessment in calculating power usage effectiveness for a data centre. Energy Conversion and Management, 76. 155 - 161. ISSN 0196-8904

Brandolini, N, Kapur, N and Hall, RM (2014) Dynamics of interpedicular widening in spinal burst fractures: an in vitro investigation. Spine Journal, 14 (9). pp. 2164-2171. ISSN 1529-9430

Bukuaghangin, O, Sanni, O, Kapur, N et al. (3 more authors) (2016) Kinetics study of barium sulphate surface scaling and inhibition with a once-through flow system. Journal of Petroleum Science and Engineering, 147. pp. 699-706. ISSN 0920-4105

Burluka, AA, Gaughan, RG, Griffiths, JF et al. (3 more authors) (2017) Experimental observations on the influence of hydrogen atoms diffusion on laminar and turbulent premixed burning velocities. Fuel, 189. pp. 66-78. ISSN 0016-2361

Burluka, AA, Gaughan, RG, Griffiths, JF et al. (3 more authors) (2016) Turbulent burning rates of gasoline components, Part 1-Effect of fuel structure of C-6 hydrocarbons. Fuel, 167. pp. 347-356. ISSN 0016-2361

Burluka, AA, Gaughan, RG, Griffiths, JF et al. (3 more authors) (2016) Turbulent burning rates of gasoline components, Part 2-Effect of carbon number. Fuel, 167. pp. 357-365. ISSN 0016-2361

C

Castrej´on-Pita, JR, Kubiak, KJ, Castrej´on-Pita, AA et al. (2 more authors) (2013) Mixing and internal dynamics of droplets impacting and coalescing on a solid surface. Physical Review E: Statistical, Nonlinear, and Soft Matter Physics, 88. 023023. ISSN 1539-3755

Chapman, MR, Henkelis, SE, Kapur, N et al. (2 more authors) (2016) A Straightforward Electrochemical Approach to Imine- and Amine-bisphenolate Metal Complexes with Facile Control Over Metal Oxidation State. ChemistryOpen, 5 (4). pp. 351-356. ISSN 2191-1363

Chi, YQ, Summers, J, Hopton, P et al. (4 more authors) (2014) Case study of a data centre using enclosed, immersed, direct liquid-cooled servers. In: Proceedings of the 30th Annual Semiconductor Thermal Measurement and Management Symposium. SEMI-THERM 2014, 09-13 Mar 2014, San Jose, CA. Institute of Electrical and Electronics Engineers (IEEE) , pp. 164-173. ISBN 978-1-4799-4374-6

Colantuono, G and Cockerill, T orcid.org/0000-0001-7914-2340 (2017) Selective strategy for solid sorbent replacement in CCS. Chemical Engineering Research and Design. ISSN 0263-8762

Collu, M, Borg, M, Shires, A orcid.org/0000-0001-6523-2636 et al. (1 more author) (2013) FloVAWT: Progress on the development of a coupled model of dynamics for floating offshore vertical axis wind turbines. In: Proceedings. 32nd International Conference on Ocean, Offshore and Arctic Engineering, 09-14 Jun 2013, Nantes, France. ASME . ISBN 978-0-7918-5542-3

Collu, M, Borg, M, Shires, A et al. (2 more authors) (2014) FloVAWT: Further Progresses on the Development of a Coupled Model of Dynamics for Floating Offshore VAWTS. In: Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering, 08-13 Jun 2014, San Francisco, California, USA. ASME . ISBN 978-0-7918-4554-7

Croce, R, Ruprecht, D orcid.org/0000-0003-1904-2473 and Krause, R (2014) Parallel-in-Space-and-Time Simulation of the Three-Dimensional, Unsteady Navier-Stokes Equations for Incompressible Flow. In: Bock, HG, Hoang, XP, Rannacher, R and Schlöder, JP, (eds.) Proceedings of the Fifth International Conference on High Performance Scientific Computing, March 5-9, 2012, Hanoi, Vietnam, Modeling, Simulation and Optimization of Complex Processes - HPSC 2012. Fifth International Conference on High Performance Scientific Computing, 05-09 Mar 2012, Hanoi, Vietnam. Modeling, Simulation and Optimization of Complex Processes . Springer International Publishing , pp. 13-23. ISBN 978-3-319-09062-7

D

De Boer, GN, Gao, L, Hewson, RW et al. (1 more author) (2016) Heterogeneous Multiscale Methods for modelling surface topography in EHL line contacts. Tribology International. ISSN 0301-679X

De Boer, GN, Gao, L, Hewson, RW et al. (3 more authors) (2016) A multiscale method for optimising surface topography in elastohydrodynamic lubrication (EHL) using metamodels. Structural and Multidisciplinary Optimization, 54 (3). pp. 483-497. ISSN 1615-147X

Dearnley, PA, Elwafi, AM, Chittenden, RJ et al. (1 more author) (2014) Wear and friction of diamondlike-carbon coated and uncoated steel roller bearings under high contact pressure oil lubricated rolling/sliding conditions. Journal of Tribology: Transactions of the ASME, 136 (2). 021101-1 . ISSN 0742-4787

Delbosc, N, Summers, J, Khan, MAI et al. (2 more authors) (2014) Optimised implementation of the Lattice Boltzmann method on a graphics processing unit towards real-time fluid simulation. Computers and Mathematics with Applications, 67 (2). 462 - 475. ISSN 0898-1221

Dowson, D (2015) Preface. Biosurface and Biotribology, 1 (1). 1 - 2. ISSN 2405-4518

Dowson, D and Unsworth, A (2016) Physical Joint Simulators. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 345-346. ISSN 0954-4119

de Boer, GN, Hewson, RW, Thompson, HM et al. (2 more authors) (2014) Two-scale EHL: three-dimensional topography in tilted-pad bearings. Tribology International, 79. 111 - 125. ISSN 0301-679X

E

Elbadawy, I, Gaskell, PH, Lawes, M et al. (1 more author) (2015) Numerical Investigation of the Effect of Ambient Turbulence on Pressure Swirl Spray Characteristics. International Journal of Multiphase Flow, 77. 271 - 284. ISSN 0301-9322

Eves, J., Toropov, V.V., Thompson, H.M. et al. (3 more authors) (2009) Topology optimization of aircraft with non-conventional configurations. In: 8th World Congress on Structural and Multidisciplinary Optimization, June 1-5 2009, Lisbon, Portugal.

F

Fawehinmi, O., Gaskell, P., Jimack, P.K. et al. (2 more authors) (2005) A combined experimental and computational fluid dynamics analysis of the dynamics of drop formation. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science, 219 (9). 933-947(15). ISSN 0954-4062

Fouvry, S. and Kubiak, K.J. (2009) Introduction of a fretting-fatigue mapping concept: Development of a dual crack nucleation - crack propagation approach to formalize fretting-fatigue damage. International Journal of Fatigue, 31 (2). 250 - 262. ISSN 0142-1123

Fouvry, S., Liskiewicz, T., Kaspa, P.H. et al. (1 more author) (2003) An energy description of wear mechanisms and its applications to oscillating sliding contacts. Wear, 255 (1-6). pp. 287-298. ISSN 0043-1648

Fouvry, S., Nowell, D., Kubiak, K. et al. (1 more author) (2008) Prediction of fretting crack propagation based on a short crack methodology. Engineering Fracture Mechanics, 75 (6). 1605 - 1622. ISSN 0013-7944

Fouvry, S., Wendler, B., Liskiewicz, T. et al. (2 more authors) (2004) Fretting wear analysis of TiC/VC carbides multilayers: experiments and modelling approaches. Wear, 257 (7-8). pp. 641-653. ISSN 0043-1648

G

Gao, L, Dowson, D orcid.org/0000-0001-5043-5684 and Hewson, RW (2017) Predictive wear modeling of the articulating metal-on-metal hip replacements. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (3). pp. 497-506. ISSN 1552-4973

Gao, L, Dowson, D and Hewson, RW (2016) A numerical study of non-Newtonian transient elastohydrodynamic lubrication of metal-on-metal hip prostheses. Tribology International, 93 (B). pp. 486-494. ISSN 0301-679X

Garraghan, P, Al-Anii, Y orcid.org/0000-0002-4382-1998, Summers, J orcid.org/0000-0001-8266-5038 et al. (3 more authors) (2016) A unified model for holistic power usage in cloud datacenter servers. In: UCC '16: Proceedings of the 9th International Conference on Utility and Cloud Computing. 9th IEEE/ACM International Conference on Utility and Cloud Computing (UCC 2016), 06-09 Dec 2016, Tongji University – Shanghai, China. Association for Computing Machinery , pp. 11-19. ISBN 978-1-4503-4616-0

Gaskell, P.H., Innes, G.E. and Savage, M.D. (1998) An experimental investigation of meniscus roll coating. Journal of Fluid Mechanics, 355. pp. 17-44. ISSN 1469-7645

Gaskell, P.H., Jimack, P.K., Koh, Y-Y. et al. (1 more author) (2008) Development and application of a parallel multigrid solver for the simulation of spreading droplets. International Journal for Numerical Methods in Fluids, 56 (8). pp. 979-989. ISSN 0271-2091

Gaskell, P.H., Jimack, P.K., Sellier, M. et al. (1 more author) (2004) Efficient and accurate time adaptive multigrid simulations of droplet spreading. International Journal for Numerical Methods in Fluids, 45 (11). pp. 1161-1186. ISSN 0271-2091

Gaskell, P.H., Jimack, P.K., Sellier, M. et al. (1 more author) (2006) Flow of evaporating, gravity-driven thin liquid films over topography. Physics of Fluids, 18 (Art. N). 14 pages. ISSN 1070-6631

Gaskell, P.H., Jimack, P.K., Sellier, M. et al. (2 more authors) (2004) Gravity-driven flow of continuous thin liquid films on non-porous substrates with topography. Journal of Fluid Mechanics, 509. pp. 253-280. ISSN 1469-7645

Gaskell, P.H., Koh, Y.Y., Jimack, P.K. et al. (2 more authors) (2009) Droplet migration: quantitative comparisons with experiment. European Physical Journal Special Topics, 166 (1). pp. 117-120. ISSN 1951-6401

Gaskell, P.H., Lee, Y.C., Thompson, H.M. et al. (2 more authors) (2009) Parallel computing as a vehicle for engineering design of functional surfaces. In: Topping, B.H.V. and Ivanyi, P., (eds.) Proceedings of the first international conference on parallel, distributed and grid computing for engineering. First international conference on parallel, distributed & grid computing for engineering , 6-8 April 2009, Pollack Mihály Faculty of Engineering, University of Pécs. Civil-Comp Press . ISBN 1759-3433

Gaskell, P.H., Lee, Y.C., Thompson, H.M. et al. (2 more authors) (2008) Micro-scale flow on naturally occurring and engineered functional surfaces. In: Proceedings of the 1st European Conference on Microfluidics – Microfluidics 2008. 1st European Conference on Microfluidics – Microfluidics 2008 (μFlu’08), December 10-12 2008, Bologna. .

Gaskell, P.H., Savage, M.D. and Thompson, H.M. (1998) Stagnation–saddle points and flow patterns in Stokes flow between contra-rotating cylinders. Journal of Fluid Mechanics, 370. pp. 221-247. ISSN 1469-7645

Gaskell, P.H., Savage, M.D. and Wilson, M. (1997) Stokes flow in a half-filled annulus between rotating coaxial cylinders. Journal of Fluid Mechanics, 337. pp. 263-282. ISSN 1469-7645

Ghanbarzadeh, A, Parsaeian, P, Morina, A et al. (5 more authors) (2016) A Semi-deterministic Wear Model Considering the Effect of Zinc Dialkyl Dithiophosphate Tribofilm. Tribology Letters, 61 (1). 12. ISSN 1023-8883

Ghanbarzadeh, A orcid.org/0000-0001-5058-4540, Piras, E, Nedelcu, I et al. (5 more authors) (2016) Zinc dialkyl dithiophosphate antiwear tribofilm and its effect on the topography evolution of surfaces: A numerical and experimental study. Wear, 362-36. pp. 186-198. ISSN 0043-1648

Ghanbarzadeh, A, Wilson, M, Morina, A et al. (2 more authors) (2016) Development of a new mechano-chemical model in boundary lubrication. Tribology International, 93 (Part B). pp. 573-582. ISSN 0301-679X

Ghanbarzadeh, A orcid.org/0000-0001-5058-4540, Wilson, M, Morina, A et al. (1 more author) (2016) A new strategy for the relative movement of rough surfaces in contact using a boundary element method. European Journal of Computational Mechanics, 25 (4). pp. 309-328. ISSN 1779-7179

Ghorbani, N, Wilson, MCT, Kapur, N et al. (2 more authors) (2014) Carbon nanotubes: A new methodology for enhanced squeeze lifetime CNTs. In: Proceedings of SPE International Conference and Exhibition on Oilfield Scale 2014. SPE International Conference and Exhibition on Oilfield Scale 2014, 14-15 May 2014, Aberdeen, UK. Society of Petroleum Engineers , 210 - 227. ISBN 9781632665911

Ghorbani, N, Wilson, MCT, Kapur, N orcid.org/0000-0003-1041-8390 et al. (3 more authors) (2017) Adsorption of polyphosphinocarboxylic acid (PPCA) scale inhibitor on carbon nanotubes (CNTs): A prospective method for enhanced oilfield scale prevention. Journal of Petroleum Science and Engineering, 150. pp. 305-311. ISSN 0920-4105

Gilkeson, C.A., Thompson, H.M., Wilson, M.C.T. et al. (2 more authors) (2009) An experimental and computational study of the aerodynamic and passive ventilation characteristics of small livestock trailers. Journal of Wind Engineering & Industrial Aerodynamics, 97 (9-10). pp. 415-425. ISSN 0167-6105

Gilkeson, C.A., Toropov, V.V., Thompson, H.M. et al. (3 more authors) (2008) Aerodynamic shape optimization of a low drag fairing for small livestock trailers. In: 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Proceedings. 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, 10 - 12 September 2008, Victoria, British Columbia Canada. AIAA Conference Proceeding Series (AIAA 2). AIAA .

Gilkeson, C.A., Wilson, M.C.T., Thompson, H.M. et al. (4 more authors) (2006) Ventilation of small livestock trailers. In: 6th MIRA International Vehicle Aerodynamics Conference : Real World Aerodynamics. The 6th MIRA International Vehicle Aerodynamics Conference, 25th -26th October 2006. MIRA . ISBN 0952415631

Gilkeson, CA, Camargo-Valero, MA, Pickin, LE et al. (1 more author) (2013) Measurement of ventilation and airborne infection risk in large naturally ventilated hospital wards. Building and Environment, 65. 35 - 48. ISSN 0360-1323

Gilkeson, CA and Noakes, CJ (2013) Application of CFD Simulation to Predicting Upper-Room UVGI Effectiveness. Photochemistry and Photobiology, 89 (4). 799 - 810 (12). ISSN 0031-8655

Gilkeson, CA, Noakes, CJ and Khan, MAI (2013) A Computational Study of UV disinfection performance within a naturally ventilated hospital ward. In: Proceedings of CLIMA2013. CLIMA2013, 11th REHVA World Congress and the 8th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, 16-19 June 2013, Prague, Czech Republic. Guarant . ISBN 978-80-260-4001-9

Gilkeson, CA, Noakes, CJ and Khan, MAI (2014) Computational fluid dynamics modelling and optimisation of an upper-room ultraviolet germicidal irradiation system in a naturally ventilated hospital ward. Indoor and Built Environment, 23 (3). 449 - 466. ISSN 1420-326X

Gilkeson, CA, Thompson, HM, Wilson, MCT et al. (1 more author) (2016) Quantifying Passive Ventilation within Small Livestock Trailers using Computational Fluid Dynamics. Computers and Electronics in Agriculture, 124. pp. 84-99. ISSN 0168-1699

Gilkeson, CA, Toropov, VV, Thompson, HM et al. (3 more authors) (2014) Dealing with numerical noise in CFD-based design optimization. Computers and Fluids, 94. 84 - 97. ISSN 0045-7930

Gilkeson, CA, Toropov, VV, Thompson, HM et al. (3 more authors) (2013) Multi-objective aerodynamic shape optimization of small livestock trailers. Engineering Optimization, 45 (11). 1309 - 1330 (22). ISSN 0305-215X

Gilkeson, CA, Toropov, VV, Thompson, HM et al. (3 more authors) (2014) The curse of numerical noise and implications for CFD-based design optimization. In: UNSPECIFIED 10th ASMO-UK / ISSMO Conference on Engineering Design Optimization, 30 Jun - 01 Jul 2014, Delft, The Netherlands. . (Unpublished)

Glass, C.R., Walters, K., Gaskell, P.H. et al. (4 more authors) (2010) Recent advances in computational fluid dynamics relevant to the modeling of pesticide flow on leaf surfaces. Pest Management Science, 66 (1). pp. 2-9. ISSN 1526-498X

Gostling, M.J., Savage, M.D. and Wilson, M.C.T. (2001) Flow in a double-film-fed fluid bead between contra-rotating rolls, Part 2: bead break and flooding. European Journal of Applied Mathematics, 12 (3). pp. 413-431. ISSN 0956-7925

Gostling, M.J., Savage, M.D., Young, A.E. et al. (1 more author) (2003) A model for deformable roll coating with negative gaps and incompressible compliant layers. Journal of Fluid Mechanics, 489. pp. 155-184. ISSN 1469-7645

Grant, CA, Twigg, PC, Savage, MD et al. (3 more authors) (2013) Estimating the mechanical properties of retinal tissue using contact angle measurements of a spreading droplet. Langmuir: the ACS journal of surfaces and colloids, 29 (16). 5080 - 5084. ISSN 0743-7463

Gurcan, F, Wilson, MCT and Savage, MD (2006) Eddy genesis and transformation of Stokes flow in a double-lid-driven cavity. Part 2: deep cavities. Proceedings of the Institution of Mechanical Engineers. Part C: Mechanical Engineering Science, 220 (12). 1765 - 1774. ISSN 0954-4062

H

Haas, A., Thompson, H.M., Wilson, M.C.T. et al. (3 more authors) (2008) Flow structure in free surface film and Couette flow over non-planar substrates. In: Proceedings of the XXII International Congress of Theoretical and Applied Mechanics (ICTAM). ICTAM 2008, 24-29 August, 2008, Adelaide, Australia. . ISBN 978-0-9805142-1-6

Harker, MR, Hattrell, T, Lawes, M et al. (3 more authors) (2012) Measurements of the three-dimensional structure of flames at low turbulence. Combustion Science and Technology, 184 (10-11). 1818 - 1837. ISSN 0010-2202

Hesketh, J, Ward, M, Dowson, D et al. (1 more author) (2014) The composition of tribofilms produced on metal-on-metal hip bearings. Biomaterials, 35 (7). pp. 2113-2119. ISSN 0142-9612

Holub, O, Lopez, A, Borse, V et al. (4 more authors) (2015) Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study. Journal of Biomechanics, 48 (12). pp. 3258-3266. ISSN 0021-9290

Howell-Smith, S, Rahnejat, H, King, PD et al. (1 more author) (2014) Reducing in-cylinder parasitic losses through surface modification and coating. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 228 (4). pp. 391-402. ISSN 0954-4070

Hu, Z, Somers, BLMT, Cracknell, RF et al. (1 more author) (2016) Investigation of the Livengood-Wu integral for modelling autoignition in a high-pressure bomb. Combustion Theory and Modelling, 20 (1). pp. 77-98. ISSN 1364-7830

Hyde, PJ, Fisher, J orcid.org/0000-0003-3833-3700 and Hall, RM (2017) Wear characteristics of an unconstrained lumbar total disc replacement under a range of in vitro test conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (1). pp. 46-52. ISSN 1552-4973

Hyde, PJ, Fisher, J and Hall, RM (2016) Wear simulation of a polyethylene-on-metal cervical total disc replacement under different concentrations of bovine serum lubricant. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 481-488. ISSN 0954-4119

Hyde, PJ, Tipper, JL, Fisher, J et al. (1 more author) (2015) Wear and biological effects of a semi-constrained total disc replacement subject to modified ISO standard test conditions. Journal of the Mechanical Behavior of Biomedical Materials, 44. pp. 43-52. ISSN 1751-6161

I

Ikin, J.B. and Thompson, H.M. (2007) Drying air-induced disturbances in multi-layer coating systems. Chemical Engineering Science, 62 (23). pp. 6631-6640. ISSN 0009-2509

Ikin, J.B., Thompson, H.M., Gaskell, P.H. et al. (1 more author) (2007) Practical limitations to carrier layer formation on inclined planes. International Polymer Processing, 22 (1). pp. 9-15. ISSN 0930-777X

J

Jin, Z and Dowson, D orcid.org/0000-0001-5043-5684 (2013) Bio-friction. Friction, 1 (2). pp. 100-113. ISSN 2223-7690

Joda, A, Jin, Z, Haverich, A et al. (2 more authors) (2016) Multiphysics simulation of the effect of leaflet thickness inhomogeneity and material anisotropy on the stress-strain distribution on the aortic valve. Journal of Biomechanics, 49 (12). pp. 2502-2512. ISSN 0021-9290

Johns, AS, Hewson, RW, Merson, E et al. (2 more authors) (2014) Internal twist drill coolant channel modelling using computational fluid dynamics. In: Oñate, E, Oliver, J and Huerta, A, (eds.) Proceedings, vol. II. 11th World Congress on Computational Mechanics (WCCM), 5th European Conference on Computational Mechanics (ECCM), 6th European Conference on Computational Fluid Dynamics (ECFD), 20-25 Jul 2014, Barcelona, Spain. International Center for Numerical Methods in Engineering (CIMNE) , pp. 1114-1122. ISBN 978-84-942844-7-2

Jones, L.N., Gaskell, P.H., Thompson, H.M. et al. (2 more authors) (2005) Anisotropic, isothermal, turbulent swirling flow in a complex combustor geometry. International Journal for Numerical Methods in Fluids, 47 (10-11). pp. 1053-1059. ISSN 0271-2091

K

Khan, AI, Delbosc, N, Noakes, CJ et al. (1 more author) (2013) Development of Real-time Flow Simulations for Indoor Environments. In: Kabele, K, Urban, M, Suchý, K and Lain, M, (eds.) 11th REHVA World Congress and the 8th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings. CLIMA 2013, 16-19 June 2013, Prague, Czech Republic. Elsevier , 3044 - 3054. ISBN 978-80-260-4001-9

Kosarieh, S, Morina, A, Laine, E et al. (2 more authors) (2013) Tribological performance and tribochemical processes in a DLC/steel system when lubricated in a fully formulated oil and base oil. Surface and Coatings Technology, 217. 1 - 12. ISSN 0257-8972

Kosarieh, S, Morina, A, Laine, E et al. (2 more authors) (2013) The effect of MoDTC-type friction modifier on the wear performance of a hydrogenated DLC coating. Wear, 302 (1-2). 890 - 898. ISSN 0043-1648

Krause, R and Ruprecht, D (2014) Hybrid Space-Time Parallel Solution of Burgers' Equation. In: Erhel, J, Gander, MJ, Halpern, L, Pichot, G, Sassi, T and Widlund, O, (eds.) Lecture Notes in Computational Science and Engineering. Domain Decomposition Methods in Science and Engineering XXI, 25-29 Jun 2012, Rennes, France. Springer International Publishing , pp. 647-655. ISBN 978-3-319-05788-0

Kreienbuehl, A, Naegel, A, Ruprecht, D et al. (3 more authors) (2015) Numerical simulation of skin transport using Parareal. Computing and Visualization in Science, 17 (2). pp. 99-108. ISSN 1432-9360

Kubiak, K., Fouvry, S. and Marechal, A.M. (2005) A practical methodology to select fretting palliatives: Application to shot peening, hard chromium and WC-Co coatings. Wear, 259 (1-6). 367 - 376. ISSN 0043-1648

Kubiak, K., Fouvry, S., Marechal, A.M. et al. (1 more author) (2006) Behaviour of shot peening combined with WC-Co HVOF coating under complex fretting wear and fretting fatigue loading conditions. Surface and Coating Technology, 201 (7). 4323 - 4328. ISSN 0257-8972

Kubiak, K., Fouvry, S. and Wendler, B.G. (2006) Comparison of shot peening and nitriding surface treatments under complex fretting loadings. Materials Science Forum, 513. 105 - 118. ISSN 0255-5476

L

Lal, S, Allinson, L, Hall, R et al. (1 more author) (2016) Biocompatibility of Silicon Nitride Nanoparticles and Cobalt Chromium Wear Debris from THR. In: Orthopaedic Proceedings. International Society for Technology in Arthroplasty (ISTA 2015), 30 Sep - 03 Oct 2015, Vienna, Austria. British Editorial Society of Bone and Joint Surgery .

Lal, S, Allinson, LM, Hall, RM et al. (1 more author) (2016) A comprehensive assessment of biological responses to silicon nitride nanoparticles and cobalt chromium wear debris from total hip replacements. In: Front. Bioeng. Biotechnol. Conference. 10th World Biomaterials Congress, 17-22 May 2016, Montreal, Canada. Frontiers Media .

Lal, S, Hall, RM and Tipper, JL orcid.org/0000-0002-8719-0323 (2016) A Novel Method for Isolation and Recovery of Ceramic Nanoparticles and Metal Wear Debris from Serum Lubricants at Ultra-low Wear Rates. Acta Biomaterialia, 42. pp. 420-428. ISSN 1742-7061

Land, S, Gurev, V, Arens, S et al. (28 more authors) (2015) Verification of cardiac mechanics software: benchmark problems and solutions for testing active and passive material behaviour. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2184). ISSN 1364-5021

Lawes, M, Sharpe, GJ, Tripathi, N et al. (1 more author) (2016) Influence of spark ignition in the determination of Markstein lengths using spherically expanding flames. Fuel, 186. pp. 579-586. ISSN 0016-2361

Lee, P.M. (2008) Tribological investigations of the piston assembly and liner of a gasoline engine. In: Inaugural Automotive Researchers Conference, 8-9 January 2008, Huddersfield University.

Lee, P.M. and Priest, M. (2007) Influence of gasoline engine lubricant on tribological performance, fuel economy and emissions. In: Internal Combustion Engines : performance fuel economy and emissions, London, 11-12 December 2007. IMechE Internal Combustion Engines: Performance, Fuel Economy and Emissions, 11-12 December 2007, IMechE, London. Chandos , Oxford , pp. 235-246. ISBN 1843344513

Lee, P.M. and Priest, M. (2004) An innovation integrated approach to testing motorcycle drive chain lubricants. In: Lubrecht, A. and Dalmaz, G., (eds.) Transients Processes in Tribology, Proc 30th Leeds-Lyon Symposium on Tribology. 30th Leeds-Lyon Symposium on Tribology, 2 - 5 September 2003, Lyon. Tribology and Interface Engineering Series (43). Elsevier , Amsterdam , pp. 291-298. ISBN 978-0-444-51706-7

Lee, P.M., Stark, M.S., Wilkinson, J.J. et al. (4 more authors) (2005) The degradation of lubricants in gasoline engines: Development of a test procedure to evaluate engine oil degradation and its consequences for rheology. In: Dowson, D., Priest, M., Lubrecht, A. and Dalmaz, G., (eds.) Life Cycle Tribology, Proceedings of 31st Leeds-Lyon Symposium on Tribology. Tribology and Interface Engineering Series, 48 . Elsevier , Amsterdam , pp. 593-602. ISBN 978-0-444-51687-9

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2009) Adaptive multigrid solutions of thin film flows over topography. In: Deconinck, H. and Dick, E., (eds.) Computational Fluid Dynamics 2006. Proceedings of the Fourth International Conference on Computational Fluid Dynamics, 10-14 July 2006 , Ghent, Belgium. Springer Berlin Heidelberg , pp. 353-358. ISBN 978-3-540-92779-2

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2009) FILMPAR: A parallel algorithm designed for the efficient and accurate computation of thin film flow on functional surfaces containing micro-structure. Computer Physics Communications Package, 180 (12). pp. 2634-2649.

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2009) Thin film flow over flexible membranes containing surface texturing: bio-inspired solutions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (JET552). pp. 337-345. ISSN 13506501

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2008) Thin film flows over real surfaces. In: Proceedings of the XXII International Congress of Theoretical and Applied Mechanics (ICTAM). ICTAM 2008, 24-29 August, 2008, Adelaide, Australia. . ISBN 978-0-9805142-1-6

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2007) An efficient adaptive multigrid algorithm for predicting thin film flow on surfaces containing localised topographic features. Computers & Fluids, 36 (5). pp. 838-855. ISSN 0045-7930

Lee, Y.C., Thompson, H.M. and Gaskell, P.H. (2008) The efficient and accurate solution of continuous thin film flow over surface patterning and past occlusions. International Journal for Numerical Methods in Fluids, 56 (8). pp. 1375-1381. ISSN 0271-2091

Levenstein, MA orcid.org/0000-0002-2309-3743, Bawazer, LA, Mc Nally, CS et al. (4 more authors) (2016) A Reproducible Approach to the Assembly of Microcapillaries for Double Emulsion Production. Microfluidics and Nanofluidics, 20 (10). 143. ISSN 1613-4982

Liskiewicz, T. and Fouvry, S. (2005) Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions. Tribology International, 38 (1). pp. 69-79. ISSN 0301-679X

Liskiewicz, T., Fouvry, S. and Wendler, B. (2005) Development of a Wöhler-like approach to quantify the Ti(CxNy) coatings durability under oscillating sliding conditions. Wear, 259 (7-12). pp. 835-841. ISSN 0043-1648

Liskiewicz, T., Fouvry, S. and Wendler, B. (2005) Hard coatings durability under fretting wear. In: Dowson, D., Priest, M., Dalmaz, G. and Lubrecht, A.A., (eds.) Life Cycle Tribology. 31st Leeds-Lyon Symposium on Tribology, 7 - 10 September 2004, Trinity and All Saints College, Leeds, UK. Tribology and Interface Engineering Series (48). , pp. 657-665. ISBN 9780444516879

Liskiewicz, T., Fouvry, S. and Wendler, B. (2003) Impact of variable loading conditions on fretting wear. Surface and Coatings Technology, 163-16. pp. 465-471. ISSN 0257-8972

Liskiewicz, T., Mathia, T., Fouvry, S. et al. (1 more author) (2007) Systematic approach for morphological analysis of worn surfaces. Tribotest, 13 (3). pp. 139-150. ISSN 1354-4063

Liskiewicz, T., Morina, A. and Neville, A. (2008) Challenges in lubricant additives technology. The Triz, Feb.

Liskiewicz, T., Morina, A. and Neville, A. (2008) Friction in nature. WIT Transactions on Ecology and the Environment : Design and Nature IV, 114. pp. 263-272. ISSN 1743-3541

Liskiewicz, T., Neville, A. and Achanta, S. (2006) Impact of corrosion on fretting damage of electrical contacts. In: Proceedings of the Fifty-second IEEE Holm Conference on Electrical Contacts. IEEE Holm Conference on Electrical Contacts, September 25-27, 2006, Montreal, Quebec, CANADA. IEEE , pp. 257-262. ISBN 1-4244-0581-5

Liskiewicz, T., Rybiak, R., Fouvry, S. et al. (1 more author) (2006) Fretting wear of Ti(CxNy) PVD coatings under variable environmental conditions. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 220 (3). pp. 125-134. ISSN 1350-6501

Liu, K, Burluka, AA and Sheppard, CGW (2013) Turbulent flame and mass burning rate in a spark ignition engine. Fuel, 107. 202 - 208. ISSN 0016-2361

M

Marsh, K, Shires, A orcid.org/0000-0001-6523-2636 and Gilkeson, C (2016) 2D Modelling of a 17 m Sandia VAWT. In: TBC. European Mechanics Society Colloquium 583 ‘Scientific and Technological challenges in offshore vertical axis wind turbines’, 07-09 Sep 2016, Delft, The Netherlands. .

Miles, DE, Mitchell, EA, Kapur, N et al. (2 more authors) (2016) Peptide: Glycosamineglycan hybrid hydrogels as an injectable intervention for spinal disc degeneration. Journal of Materials Chemistry B, 4 (19). pp. 3225-3231. ISSN 2050-750X

Minion, ML, Speck, R, Bolten, M et al. (2 more authors) (2015) Interweaving PFASST and Parallel Multigrid. SIAM Journal on Scientific Computing, 37 (5). 5. S244-S263. ISSN 1064-8275

Morina, A., Liskiewicz, T. and Neville, A. (2006) Designing new lubricant additives using biomimetics. WIT Transactions on Ecology and the Environment, 87. pp. 157-166. ISSN 1743-3541

N

Neville, A, Hesketh, J, Beadling, AR orcid.org/0000-0001-5501-0140 et al. (2 more authors) (2016) Incorporating corrosion measurement in hip wear simulators: An added complication or a necessity? Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 406-420. ISSN 0954-4119

Neville, A., Morina, A., Liskiewicz, T. et al. (1 more author) (2007) Synovial joint lubrication – does nature teach more effective engineering lubrication strategies? Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (10). pp. 1223-1230. ISSN 0954-4062

Noakes, CJ, Khan, MAI and Gilkeson, CA (2013) Optimizing upper-room UVGI systems for infection risk and energy. In: ASHRAE IAQ 2013 Conference Collection: Environmental Health in Low Energy Buildings. ASHRAE IAQ 2013: Environmental Health in Low Energy Buildings. Airborne Infection Control - Ventilation, IAQ & Energy, 15-18 Oct 2013, Vancouver, Canada. American Society of Heating, Refrigerating and Air-Conditioning Engineers . ISBN 9781936504596

O

Oladokun, AO, Bryant, MB orcid.org/0000-0003-4442-5169, Hall, RH et al. (1 more author) (2017) The effect of cyclic load on the evolution of fretting current at the interface of Metal-on-Metal and Ceramic-on-Metal taper junction of hip prostheses. In: Bone and Joint Journal. 29th Annual Congress of the International Society for Technology in Arthroplasty (ISTA 2016), 05-08 Oct 2016, Boston, USA. British Editorial Society of Bone and Joint Surgery .

Oladokun, AO, Pettersson, M, Bryant, M et al. (2 more authors) (2016) Sub-surface investigation of fretted CO28CR6MO and TI6AL4V. In: Orthopaedic Proceedings: Bone and Joint Journal. The International Society for Technology in Arthroplasty (ISTA), 28th Annual Congress, 2015, 30 Sep - 03 Oct 2015, Vienna, Austria. Orthopaedic Proceedings .

Orlandi, A, Collu, M, Zanforlin, S et al. (1 more author) (2015) 3D URANS analysis of a vertical axis wind turbine in skewed flows. Journal of Wind Engineering and Industrial Aerodynamics, 147. pp. 77-84. ISSN 0167-6105

P

Palacios, A, Bradley, D and Hu, L (2016) Lift-off and blow-off of methane and propane subsonic vertical jet flames, with and without diluent air. Fuel, 183. pp. 414-419. ISSN 0016-2361

Palacios, A, Bradley, D and Lawes, M orcid.org/0000-0002-8693-7536 (2016) Blow-Off Velocities of Jet Flames. In: UNSPECIFIED Eighth International Seminar on Fire and Explosions Hazards, 25-28 Apr 2016, Hefei, Anhui, China. . (In Press)

Parsaeian, P, Ghanbarzadeh, A, Wilson, M et al. (5 more authors) (2016) An experimental and analytical study of the effect of water and its tribochemistry on the tribocorrosive wear of boundary lubricated systems with ZDDP-containing oil. Wear, 358-35. pp. 23-31. ISSN 0043-1648

Pettersson, M, Bryant, MG, Schmidt, S et al. (4 more authors) (2016) Dissolution behaviour of silicon nitride coatings for joint replacements. Materials Science and Engineering: C, 62. pp. 497-505. ISSN 0928-4931

Pohl, J, Thompson, H, Guijarro Valencia, A et al. (3 more authors) (2017) Structural Deflection's Impact in Turbine Stator Well Heat Transfer. Journal of Engineering for Gas Turbines and Power, 139 (4). 041901. ISSN 0742-4795

Pohl, J, Thompson, HM orcid.org/0000-0002-0493-1131, Schlaps, RC et al. (3 more authors) (2017) Innovative Turbine Stator Well Design Using a Kriging Assisted Optimization Method. Journal of Engineering for Gas Turbines and Power, 139 (7). 072603-1-072603-9. ISSN 0742-4795

Preutenborbeck, M, Holub, O, Freeman, E et al. (3 more authors) (2016) Assessment of the fracture risk of proximal porcine femurs with simulated lesions using a fracture prediction method based on beam theory. In: Journal of Orthopaedic Translation. 2016 International Combined Meeting of Orthopaedic Research Societies, 21-25 Sep 2016, Xian, China. Elsevier , pp. 83-84.

R

Rahmani, R, Rahnejat, H, Fitzsimons, B et al. (1 more author) (2017) The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction. Applied Energy, 191. pp. 568-581. ISSN 0306-2619

Raw, RK, Wilkie, RM, Culmer, PR et al. (1 more author) (2012) Reduced motor asymmetry in older adults when manually tracing paths. Experimental Brain Research, 217 (1). 35 - 41. ISSN 0014-4819

Ruprecht, D (2014) Convergence of Parareal with spatial coarsening. PAMM, 14 (1). 1031 - 1034. ISSN 1617-7061

Ruprecht, D orcid.org/0000-0003-1904-2473 and Krause, R (2012) Explicit parallel-in-time integration of a linear acoustic-advection system. Computers and Fluids, 59. pp. 72-83. ISSN 0045-7930

Ruprecht, D orcid.org/0000-0003-1904-2473, Schaedle, A, Schmidt, F et al. (1 more author) (2008) Transparent Boundary Conditions for Time-Dependent Problems. SIAM Journal on Scientific Computing, 30 (5). pp. 2358-2385. ISSN 1064-8275

Ruprecht, D orcid.org/0000-0003-1904-2473, Schädle, A and Schmidt, F (2013) Optimal parameter choice for the pole condition. PAMM, 13 (1). pp. 455-456. ISSN 1617-7061

Ruprecht, D, Schädle, A and Schmidt, F (2013) Transparent boundary conditions based on the pole condition for time-dependent, two-dimensional problems. Numerical Methods for Partial Differential Equations, 29 (4). 1367 - 1390. ISSN 0749-159X

Ruprecht, D orcid.org/0000-0003-1904-2473 and Speck, R (2016) Spectral deferred corrections with fast-wave slow-wave splitting. SIAM Journal on Scientific Computing, 38 (4). A2535-A2557. ISSN 1064-8275

Ruprecht, D, Speck, R and Krause, R (2015) Parareal for diffusion problems with space- and time-dependent coefficients. In: Dickopf, T, Gander, MJ, Halpern, L, Krause, R and Pavarino, LF, (eds.) Domain Decomposition Methods in Science and Engineering XXII. 22nd International Conference on Domain Decomposition Methods, 16-20 Sep 2013, Lugano, Switzerland. Springer International Publishing , pp. 371-378. ISBN 978-3319188263

Ruprecht, D, Winkel, M and Krause, R (2015) EWE: Toward electro-mechanical cardiac simulations with MOOSE. PAMM, 15 (1). 683 - 684. ISSN 1617-7061

Ruprecht, DR (2015) PararealF90: Implementing Parareal - OpenMP or MPI? Zenodo.

Rybiak, R., Fouvry, S., Liskiewicz, T. et al. (1 more author) (2008) Fretting wear of TiN PVD coating under variable relative humidity conditions – development of a “composite” wear law. Surface and Coatings Technology, 202 (9). pp. 1753-1763. ISSN 0257-8972

S

Sanni, O, Bukuaghangin, O, Charpentier, T et al. (2 more authors) (2016) Using a real-time visualisation technique for the assessment of surface scale kinetics and mechanisms of inhibition. In: Society of Petroleum Engineers - SPE International Oilfield Scale Conference and Exhibition. Society of Petroleum Engineers - SPE International Oilfield Scale Conference and Exhibition, 11-12 May 2016, Aberdeen, UK. Society of Petroleum Engineers , pp. 434-447. ISBN 978-1-5108-2472-0

Sanni, O, Kapur, N, Charpentier, T et al. (1 more author) (2015) Study of surface deposition and bulk scaling kinetics in oilfield conditions using an in-situ flow rig. In: NACE - International Corrosion Conference Series. Corrosion 2015, 15-19 Mar 2015, Dallas, Texas. .

Scholle, M., Aksel, N., Thompson, H.M. et al. (2 more authors) (2008) A general free surface rule for Stokes flow of fluid films over obstacles. In: Proceedings of the XXII International Congress of Theoretical and Applied Mechanics (ICTAM). ICTAM 2008, 24-29 August, 2008, Adelaide, Australia. . ISBN 978-0-9805142-1-6

Scholle, M., Haas, A., Aksel, N. et al. (3 more authors) (2008) Competing geometric and inertial effects on local flow structure in thick gravity-driven fluid films. Physics of Fluids, 20 (12). Art. No. 123101. ISSN 1070-6631

Scholle , M., Haas, A., Aksel, N. et al. (3 more authors) (2009) The effect of locally induced flow structure on global heat transfer for plane laminar shear flow. International Journal of Heat and Fluid Flow, 30 (2). pp. 175-185. ISSN 0142-727X

Scholle , M., Haas, A., Aksel, N. et al. (3 more authors) (2009) Eddy genesis and manipulation in plane laminar shear flow. Physics of Fluids, 21 (7). ISSN 1070-6631

Sellier, M., Lee, Y.C., Thompson, H.M. et al. (1 more author) (2009) Thin film flow on surfaces containing localized arbitrary occlusions. Computers & Fluids, 38 (1). pp. 171-182. ISSN 0045-7930

Shahmohamadi, H, Rahmani, R, Rahnejat, H et al. (2 more authors) (2015) Big end bearing losses with thermal cavitation flow under cylinder deactivation. Tribology Letters, 57 (2). ISSN 1023-8883

Sharpe, G.J. (2008) Effect of thermal expansion on the linear stability of planar premixed flames for a simple chain-branching model: The high activation energy asymptotic limit. Combustion Theory and Modelling, 12 (4). pp. 717-738. ISSN 1364-7830

Sharpe, G.J. (2003) Linear stability of planar premixed flames: reactive Navier-Stokes equations with finite activation energy and arbitrary Lewis number. Combustion Theory and Modelling, 7 (1). pp. 45-65. ISSN 1741-3559

Sharpe, G.J. (2009) Thermal-diffusion instability of premixed flames for a simple chain-branching chemistry model with finite activation energy. SIAM Journal on Applied Mathematics (SIAP), 70 (3). pp. 866-884. ISSN 0036-1399

Sharpe, G.J. and Bdzil, J.B. (2006) Interactions of inert confiners with explosives. Journal of Engineering Mathematics, 54 (3). pp. 273-298. ISSN 0022-0833

Sharpe, G.J. and Braithwaite, M. (2005) Steady non-ideal detonations in cylindrical sticks of expolsives. Journal of Engineering Mathematics, 53 (1). pp. 39-58. ISSN 0022-0833

Sharpe, G.J. and Falle, S.A.E.G. (2006) Nonlinear cellular instabilities of planar premixed flames: numerical simulations of the Reactive Navier-Stokes equations. Combustion Theory and Modelling, 10 (3). pp. 483-514. ISSN 1741-3559

Sharpe, G.J., Gorchkov, V. and Short, M. (2008) Shock initiation of explosives: the idealized condensed-phase model. IMA Journal of Applied Mathematics, 73 (2). pp. 361-373. ISSN 0272-4960

Sharpe, G.J. and Maflahi, N. (2006) Homogeneous explosion and shock initiation for a three-step chain-branching reaction model. Journal of Fluid Mechanics, 566. pp. 163-194. ISSN 0022-1120

Sharpe, G.J. and Quirk, J.J. (2008) Nonlinear cellular dynamics of the idealized detonation model: Regular cells. Combustion Theory and Modelling, 12 (1). pp. 1-21. ISSN 1364-7830

Sharpe, G.J. and Short, M. (2007) Ignition of thermally sensitive explosives between a contact surface and a shock. Physics of Fluids, 19 (12). Art. No. 126102. ISSN 1070-6631

Sharpe, G.J. and Short, M. (2004) Shock-induced ignition of thermally sensitive explosives. IMA Journal of Applied Mathematics, 69 (5). pp. 493-520. ISSN 1464-3634

Shires, A (2013) Design optimisation of an offshore vertical axis wind turbine. Proceedings of the ICE - Energy, 166 (EN1). 7 - 18. ISSN 1751-4223

Shires, A (2013) Development and evaluation of an aerodynamic model for a novel vertical axis wind turbine concept. Energies, 6 (5). 2501 - 2520. ISSN 1996-1073

Shires, A orcid.org/0000-0001-6523-2636, Collu, M and Borg, M (2013) FloVAWT: Progress on the Development of a Coupled Model of Dynamics for Floating Offshore Vertical Axis Wind Turbines. In: Proceedings of the International Offshore and Polar Engineering Conference. 23rd International Offshore and Polar Engineering Conference, 30 Jun - 05 Jul 2013, Anchorage, Alaska, USA. International Society of Offshore and Polar Engineers , pp. 345-351. ISBN 9781880653999

Shires, A and Kourkoulis, V (2013) Application of circulation controlled blades for vertical axis wind turbines. Energies, 6 (8). 3744 - 3763. ISSN 1996-1073

Silthoe, H, Cockerill, T, Hughes, KJ et al. (4 more authors) (2016) Developing an optimal electricity generation mix for the UK 2050 future. Energy, 100. pp. 363-373. ISSN 0360-5442

Speck, R and Ruprecht, D orcid.org/0000-0003-1904-2473 (2016) Toward fault-tolerant parallel-in-time integration with PFASST. Parallel Computing. ISSN 0167-8191

Speck, R, Ruprecht, D, Emmett, M et al. (2 more authors) (2014) A space-time parallel solver for the three-dimensional heat equation. In: Bader, M, Bode, A, Bungartz, H-J, Gerndt, M, Joubert, GR and Peter, F, (eds.) Parallel Computing: Accelerating Computational Science and Engineering (CSE). ParCo2013 – International Conference on Parallel Computing, 10-13 Sep 2013, Garching, Germany. Advances in Parallel Computing, 25 . IOS Press , pp. 263-272. ISBN 978-1-61499-380-3

Speck, R, Ruprecht, D, Emmett, M et al. (3 more authors) (2015) A multi-level spectral deferred correction method. BIT Numerical Mathematics, 55 (3). 843 - 867. ISSN 0006-3835

Speck, R, Ruprecht, D, Krause, R et al. (4 more authors) (2014) Integrating an N -Body Problem with SDC and PFASST. In: Erhel, J, Gander, MJ, Halpern, L, Pichot, G, Sassi, T and Widlund, O, (eds.) Domain Decomposition Methods in Science and Engineering XXI. 21st International Conference on Domain Decomposition Methods, 25-29 Jun 2012, Rennes, France. Lecture Notes in Computational Science and Engineering, 98 . Springer International Publishing , pp. 637-645. ISBN 978-3-319-05788-0

Speck, R, Ruprecht, D, Minion, M et al. (2 more authors) (2015) Inexact spectral deferred corrections. In: Dickopf, T, Gander, MJ, Halpern, L, Krause, R and Pavarino, LF, (eds.) Domain Decomposition Methods in Science and Engineering XXII. 22nd International Conference on Domain Decomposition Methods, 16-20 Sep 2013, Lugano, Switzerland. Springer International Publishing , pp. 389-396. ISBN 978-3319188263

Steiner, J, Ruprecht, D orcid.org/0000-0003-1904-2473, Speck, R et al. (1 more author) (2015) Convergence of Parareal for the Navier-Stokes Equations Depending on the Reynolds Number. In: Abdulle, A, Deparis, S, Kressner, D, Nobile, F and Picasso, M, (eds.) Proceedings of ENUMATH 2013, the 10th European Conference on Numerical Mathematics and Advanced Applications. Numerical Mathematics and Advanced Applications - ENUMATH 2013, 26-30 Aug 2013, Lausanne, Switzerland. Lecture Notes in Computational Science and Engineering, 103 . Springer Verlag (Germany) , pp. 195-202. ISBN 978-3-319-10704-2

Stratton-Powell, AA, Anderson, IA, Timothy, J et al. (2 more authors) (2015) Neurosurgical patties: adhesion and damage mitigation. Journal of Neurosurgery, 123 (1). 153 - 160. ISSN 0022-3085

T

Taherkhani, AR, Gilkeson, CA, Gaskell, PH et al. (4 more authors) (2017) Aerodynamic CFD Based Optimization of Police Car Using Bezier Curves. SAE International Journal of Materials and Manufacturing. 2017-01-9450. (In Press)

Taherkhani, AR, de Boer, GN, Gaskell, PH et al. (5 more authors) (2015) Aerodynamic Drag Reduction of Emergency Response Vehicles. Advances in Automobile Engineering, 4 (2). ISSN 2167-7670

Tatchell-Evans, M, Kapur, N orcid.org/0000-0003-1041-8390, Summers, J orcid.org/0000-0001-8266-5038 et al. (2 more authors) (2017) An experimental and theoretical investigation of the extent of bypass air within data centres employing aisle containment, and its impact on power consumption. Applied Energy, 186 (Part 3). pp. 457-469. ISSN 0306-2619

Taylor, G., Liskiewicz, T., Morina, A. et al. (3 more authors) (2008) Investigation of adhesion forces at the peritoneal surface. WIT Transactions on Ecology and the Environment, 114. pp. 273-280. ISSN 1743-3541

Taylor, G., Liskiewicz, T., Neville, A. et al. (3 more authors) (2009) Providing adhesion for a miniture mobile intra-abdominal device based on biomimetic principles. In: Proceedings of 3rd Vienna International Conference on Nano-Technology. Viennano'09, 18-20 March, Vienna, Austria. , pp. 401-407. ISBN 978-3-901657-32-0

Timothy, J, Wilson, J, Rice, E et al. (1 more author) (2016) Nanocrystalline hydroxyapatite intervertebral cages induce fusion after anterior cervical discectomy and may be a safe alternative to PEEK or carbon fiber intervertebral cages. British Journal of Neurosurgery, 30 (6). pp. 654-657. ISSN 0268-8697

Turner, JWG, Popplewell, A, Patel, R et al. (17 more authors) (2014) Ultra Boost for Economy: Extending the Limits of Extreme Engine Downsizing. SAE International Journal of Engines, 7 (1). 2014-01-1185. 387 - 417. ISSN 1946-3936

V

Veremieiev, S, Brown, A, Gaskell, PH et al. (3 more authors) (2014) Modelling the flow of droplets of bio-pesticide on foliage. Interfacial Phenomena and Heat Transfer, 2 (1). 1 - 14. ISSN 2169-2785

Veremieiev, S, Thompson, HM and Gaskell, PH (2015) Free-surface film flow over topography: full three-dimensional finite element solutions. Computers and Fluids, 122. 66 - 82. ISSN 0045-7930

Veremieiev, S., Gaskell, P.H., Lee, Y.C. et al. (1 more author) (2009) Electric fields as a means of controlling thin film flow over topography. In: 2nd Micro and Nano Flows, MNF2009, 1-2 September 2009, Brunel University, West London, UK.

Veremieiev, S., Thompson, H.M., Lee, Y.C. et al. (1 more author) (2010) Computing inertial two- and three-dimensional thin film flow on planar surfaces featuring topography. Computers & Fluids, 39 (3). pp. 431-450. ISSN 0045-7930

W

Walkley, M.A., Gaskell, P.H., Jimack, P.K. et al. (2 more authors) (2005) Adaptive finite element simulation of three-dimensional surface tension dominated free-surface flow problems. Australian and New Zealand Industrial and Applied Mathematics Journal, 46 (E). C558-C571. ISSN 1446-8735

Walkley, M.A., Gaskell, P.H., Jimack, P.K. et al. (2 more authors) (2005) Finite element simulation of three-dimensional free-surface flow problems. Journal of Scientific Computing, 24 (2). pp. 147-162. ISSN 0885-7474

Walkley, M.A., Gaskell, P.H., Jimack, P.K. et al. (3 more authors) (2004) On the calculation of normals in free-surface flow problems. Communications in Numerical Methods in Engineering, 20 (5). pp. 343-351. ISSN 1099-0887

Watt, S.D. and Sharpe, G.J. (2005) Linear and nonlinear dynamics of cylindrically and spherically expanding detonation waves. Journal of Fluid Mechanics, 522. pp. 329-356. ISSN 0022-1120

Williams, MJ and Shires, A orcid.org/0000-0001-6523-2636 (2002) Validation of CFD for racing car analysis and design. In: Proceedings of the 2002 SAE Motorsports Engineering Conference and Exhibition. SAE Motorsports Engineering Conference and Exhibition, 02-05 Dec 2002, Indiana, USA. Society of Automotive Engineers (SAE) . ISBN 9780768011296

Wilson, M. C. T., Summers, J. L., Shikhmurzaev, Y. D. et al. (2 more authors) (2006) Nonlocal hydrodynamic influence on the dynamic contact angle: Slip models versus experiment. Physical Review E, 73 (4). 041606. ISSN 1539-3755

Wilson, M.C.T., Gaskell, P.H. and Savage, M.D. (2001) Flow in a double-film-fed fluid bead between contra-rotating rolls, Part 1: equilibrium flow structure. European Journal of Applied Mathematics, 12 (3). pp. 395-411. ISSN 0956-7925

Wilson, M.C.T., Gaskell, P.H. and Savage, M.D. (2005) Nested separatrices in simple shear flows: the effect of localized disturbances on stagnation lines. Physics of Fluids, 17 (9). 093601. ISSN 1070-6631

Wilson, M.C.T., Summers, J.L., Kapur, N. et al. (1 more author) (2006) Stirring and transport enhancement in a continuously modulated free-surface flow. Journal of Fluid Mechanics, 565. pp. 319-351. ISSN 1469-7645

Winkel, M, Speck, R and Ruprecht, D (2015) Does Boris-SDC conserve phase space volume? PAMM, 15 (1). 687 - 688. ISSN 1617-7061

Winkel, M, Speck, R and Ruprecht, D (2015) A high-order Boris integrator. Journal of Computational Physics, 295. 456 - 474. ISSN 0021-9991

Woon, WH, Greig, D, Savage, MD et al. (4 more authors) (2015) Asymmetric vitreomacular traction and symmetrical full thickness macular hole formation. Graefe's Archive for Clinical and Experimental Ophthalmology, 253 (11). pp. 1851-1857. ISSN 0721-832X

Woon, WH, Greig, D, Savage, MD et al. (4 more authors) (2015) Movement of the inner retina complex during the development of primary full-thickness macular holes: implications for hypotheses of pathogenesis. Graefe's Archive for Clinical and Experimental Ophthalmology, 253 (12). pp. 2103-2109. ISSN 0721-832X

X

Xia, X, Morina, A, Neville, A et al. (4 more authors) (2008) Tribological performance of an Al-Si alloy lubricated in the boundary regime with ZDDP and MoDTC additives. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 222 (3). 305 - 314 (10). ISSN 1350-6501

Y

Yan, Y., Neville, A. and Dowson, D. (2007) Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments. Wear, 263 (7-12). pp. 1417-1422. ISSN 0043-1648

Z

Zuway, KY, Smith, JP, Foster, CW et al. (3 more authors) (2015) Detection and quantification of new psychoactive substances (NPSs) within the evolved "legal high" product, NRG-2, using high performance liquid chromatography-amperometric detection (HPLC-AD). Analyst, 140 (18). 6283 - 6294. ISSN 0003-2654

This list was generated on Thu Mar 23 03:43:29 2017 GMT.