Browse by Academic Unit (A-Z)

Article

Abdelgaied, A, Brockett, CL, Liu, F et al. (3 more authors) (2013) Quantification of the effect of cross-shear and applied nominal contact pressure on the wear of moderately cross-linked polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (1). 18 - 26. ISSN 0954-4119

Abdelgaied, A, Brockett, CL, Liu, F et al. (3 more authors) (2014) The effect of insert conformity and material on total knee replacement wear. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (1). 98 - 106. ISSN 0954-4119

Abdelgaied, A orcid.org/0000-0003-0066-1688, Fisher, J and Jennings, LM orcid.org/0000-0003-1446-4511 (2018) A Comprehensive Combined Experimental and Computational Framework for Pre-clinical Wear Simulation of Total Knee Replacements. Journal of the Mechanical Behavior of Biomedical Materials, 78. pp. 282-291. ISSN 1751-6161

Abdelgaied, A orcid.org/0000-0003-0066-1688, Fisher, J orcid.org/0000-0003-3833-3700 and Jennings, LM orcid.org/0000-0003-1446-4511 (2017) A comparison between electromechanical and pneumatic-controlled knee simulators for the investigation of wear of total knee replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (7). pp. 643-651. ISSN 0954-4119

Abdelgaied, A, Fisher, J and Jennings, LM orcid.org/0000-0003-1446-4511 (2022) Understanding the differences in wear testing method standards for total knee replacement. Journal of the Mechanical Behavior of Biomedical Materials. 105258. ISSN 1751-6161

Abdelgaied, A orcid.org/0000-0003-0066-1688, Stanley, M, Galfe, M et al. (3 more authors) (2015) Comparison of the biomechanical tensile and compressive properties of decellularised and natural porcine meniscus. Journal of Biomechanics, 48 (8). pp. 1389-1396. ISSN 0021-9290

Abdullah, NA, Curiel-Sosa, JL, Taylor, ZA orcid.org/0000-0002-0718-1663 et al. (3 more authors) (2017) Transversal crack and delamination of laminates using XFEM. Composite Structures, 173. pp. 78-85. ISSN 0263-8223

Abouhossein, A orcid.org/0000-0001-8697-1593, Awad, MI orcid.org/0000-0002-0367-0187, Maqbool, HF et al. (6 more authors) (2019) Foot trajectories and loading rates in a transfemoral amputee for six different commercial prosthetic knees: An indication of adaptability. Medical Engineering and Physics, 68. pp. 46-56. ISSN 1350-4533

Abouhossein, A., Awad, M.I., Maqbool, H.F. et al. (6 more authors) (2024) Corrigendum to ‘Foot trajectories and loading rates in a transfemoral amputee for six different commercial prosthetic knees: An indication of adaptability’[Medical Engineering and Physics, Volume 68, June 2019, Pages 46–56]. Medical Engineering & Physics, 124. 104030. ISSN 1350-4533

Al-Hajjar, M orcid.org/0000-0001-5008-6138, Carbone, S, Jennings, LM orcid.org/0000-0003-1446-4511 et al. (4 more authors) (2017) Wear of composite ceramics in mixed-material combinations in total hip replacement under adverse edge loading conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (6). pp. 1361-1368. ISSN 1552-4973

Al-Hajjar, M, Fisher, J, Tipper, JL et al. (2 more authors) (2013) Wear of 36-mm BIOLOX(R) delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 227 (5). 535 - 542. ISSN 0954-4119

Al-Hajjar, M, Gremillard, L, Begand, S et al. (5 more authors) (2019) Combined wear and ageing of ceramic-on-ceramic bearings in total hip replacement under edge loading conditions. Journal of the Mechanical Behavior of Biomedical Materials, 98. pp. 40-47. ISSN 1751-6161

Al-Hajjar, M, Jennings, LM, Begand, S et al. (3 more authors) (2013) Wear of novel ceramic-on-ceramic bearings under adverse and clinically relevant hip simulator conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101 (8). 1456 - 1462. ISSN 0021-9304

Al-Hajjar, M orcid.org/0000-0001-5008-6138, Fisher, J orcid.org/0000-0003-3833-3700, Williams, S orcid.org/0000-0002-6963-965X et al. (2 more authors) (2013) Effect of femoral head size on the wear of metal on metal bearings in total hip replacements under adverse edge‐loading conditions. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 101B (2). pp. 213-222. ISSN 1552-4973

Alaggio, R. orcid.org/0000-0003-3915-3816, Amador, C. orcid.org/0000-0003-0352-5526, Anagnostopoulos, I. orcid.org/0000-0002-5043-6043 et al. (307 more authors) (2023) Correction: “The 5th edition of The World Health Organization Classification of Haematolymphoid Tumours: Lymphoid Neoplasms” Leukemia. 2022 Jul;36(7):1720–1748. Leukemia, 37 (9). pp. 1944-1951. ISSN 0887-6924

Aldridge, A, Desai, A, Owston, H et al. (6 more authors) (2018) Development and characterisation of a large diameter decellularised vascular allograft. Cell and Tissue Banking, 19 (3). pp. 287-300. ISSN 1389-9333

Ali, M, Al-Hajjar, M, Fisher, J et al. (1 more author) (2019) The Influence of Kinematic Conditions and Variations in Component Positioning on the Severity of Edge Loading and Wear of Ceramic-on-Ceramic Hip Bearings. Ceramics, 2 (3). pp. 488-501. ISSN 2571-6131

Ali, M, Al-Hajjar, M orcid.org/0000-0001-5008-6138, Partridge, S et al. (3 more authors) (2016) Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 389-397. ISSN 0954-4119

Ali, M, Al-Hajjar, M, Fisher, J et al. (1 more author) (2023) Wear and deformation of metal-on-polyethylene hip bearings under edge loading conditions due to variations in component positioning. Biotribology, 33-34. 100238. ISSN 2352-5738

Alshryda, S, Mason, J, Sarda, P et al. (4 more authors) (2014) The effect of tranexamic acid on artificial joint materials: a biomechanical study (the bioTRANX study). Journal of Orthopaedics and Traumatology. 1 - 8. ISSN 1590-9921

Amirouche, F., Diaz, R.L., Mok, J.M. et al. (4 more authors) (2022) 30. Influence of toggling on pullout force and screw diameter increase in spine fixation. The Spine Journal, 22 (9, Supplement). S15-S16. ISSN 1529-9430

Ardestani, MM, Chen, Z, Wang, L et al. (5 more authors) (2014) A neural network approach for determining gait modifications to reduce the contact force in knee joint implant. Medical Engineering and Physics, 36 (10). pp. 1253-1265. ISSN 1350-4533

Ardestani, MM, Moazen, M, Chen, Z et al. (2 more authors) (2015) A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitation. Neurocomputing, 154. 174 - 188. ISSN 0925-2312

Ardestani, MM, Moazen, M and Jin, Z (2015) Contribution of geometric design parameters to knee implant performance: Conflicting impact of conformity on kinematics and contact mechanics. Knee, 22 (3). pp. 217-224. ISSN 0968-0160

Ardestani, MM, Moazen, M and Jin, Z (2014) Gait modification and optimization using neural network-genetic algorithm approach: Application to knee rehabilitation. Expert Systems with Applications, 41 (16). pp. 7466-7477. ISSN 0957-4174

Ardestani, MM, Moazen, M and Jin, Z (2015) Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics. Medical Engineering and Physics, 37 (2). pp. 165-174. ISSN 1350-4533

Ardestani, MM, Moazen, M, Maniei, E et al. (1 more author) (2015) Posterior stabilized versus cruciate retaining total knee arthroplasty designs: Conformity affects the performance reliability of the design over the patient population. Medical Engineering and Physics, 37 (4). pp. 350-360. ISSN 1350-4533

Ardestani, MM, Zhang, X, Wang, L et al. (5 more authors) (2014) Human lower extremity joint moment prediction: A wavelet neural network approach. Expert Systems with Applications, 41 (9). pp. 4422-4433. ISSN 0957-4174

Assi, H., Cao, R., Castelino, M. et al. (24 more authors) (2023) A review of a strategic roadmapping exercise to advance clinical translation of photoacoustic imaging: From current barriers to future adoption. Photoacoustics, 32. 100539. ISSN 2213-5979

Barco, A, Ingham, E orcid.org/0000-0002-9757-3045, Fisher, J orcid.org/0000-0003-3833-3700 et al. (2 more authors) (2018) On the design and efficacy assessment of self‐assembling peptide‐based hydrogel‐glycosaminoglycan mixtures for potential repair of early stage cartilage degeneration. Journal of Peptide Science, 24 (8-9). e3114. ISSN 1075-2617

Behl, B, Papageorgiou, I, Brown, C et al. (4 more authors) (2013) Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells. Biomaterials, 34 (14). 3547 - 3558. ISSN 0142-9612

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. (2020) Effect of aggrecan degradation on the nanomechanics of hyaluronan in extra-fibrillar matrix of annulus fibrosus: A molecular dynamics investigation. Journal of the Mechanical Behavior of Biomedical Materials, 107. 103752. ISSN 1751-6161

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. (2022) Impact of Variations in Water Concentration on the Nanomechanical Behavior of Type I Collagen Microfibrils in Annulus Fibrosus. Journal of Biomechanical Engineering, 144 (4). 041004. ISSN 0148-0731

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. (2024) Insights into role of synergistic interplay among collagen type I, collagen type II, and water on the structure and nanomechanics of collagen fibrils in annulus fibrosus: a molecular dynamics study. Molecular Simulation. ISSN 0892-7022

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. (2023) Insights into the role of water concentrations on nanomechanical behavior of type I collagen-hyaluronan interfaces in annulus fibrosus: A molecular dynamics investigation. International Journal for Numerical Methods in Biomedical Engineering, 39 (7). e3713. ISSN 2040-7939

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. orcid.org/0000-0003-1264-1422 (2021) Radial variations in mechanical behaviour and fibrillar structure in annulus fibrosus has foundations at molecular length-scale: Insights from molecular dynamics simulations of type I and type II collagen molecules. Journal of Materials Research, 36 (17). pp. 3407-3425. ISSN 0884-2914

Bhattacharya, S. orcid.org/0000-0001-7285-453X and Dubey, D.K. orcid.org/0000-0003-1264-1422 (2023) A multiscale investigation into the role of collagen-hyaluronan interface shear on the mechanical behaviour of collagen fibers in annulus fibrosus – Molecular dynamics-cohesive finite element-based study. Journal of the Mechanical Behavior of Biomedical Materials, 147. 106147. ISSN 1751-6161

Bladen, CL, Teramura, S, Russell, SL et al. (5 more authors) (2013) Analysis of wear, wear particles, and reduced inflammatory potential of vitamin E ultrahigh-molecular-weight polyethylene for use in total joint replacement. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B (3). 458 - 466. ISSN 1552-4973

Bladen, CL, Tzu-Yin, L, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2013) In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B (3). pp. 407-413. ISSN 1552-4981

Bodkin, T, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2017) Towards Additive Manufacture of Next Generation Prosthetics, Assessing Emerging CAD Strategies for Improving the Existing CAD Process. International Journal of Rapid Manufacturing, 6 (2/3). pp. 185-196. ISSN 1757-8817

Bostan, LE, Taylor, ZA orcid.org/0000-0002-0718-1663, Carré, MJ et al. (3 more authors) (2016) A comparison of friction behaviour for ex vivo human, tissue engineered and synthetic skin. Tribology International, 103. pp. 487-495. ISSN 0301-679X

Bowes, MA, McLure, SWD, Wolstenholme, CBH et al. (4 more authors) (2016) Osteoarthritic bone marrow lesions almost exclusively colocate with denuded cartilage: a 3D study using data from the Osteoarthritis Initiative. Annals of the Rheumatic Diseases, 75 (10). pp. 1852-1857. ISSN 0003-4967

Bowland, P, Cowie, RM orcid.org/0000-0003-3903-5916, Ingham, E orcid.org/0000-0002-9757-3045 et al. (2 more authors) (2020) Biomechanical assessment of the stability of osteochondral grafts implanted in porcine and bovine femoral condyles. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234 (2). pp. 163-170. ISSN 0954-4119

Bowland, P, Ingham, E orcid.org/0000-0002-9757-3045, Fisher, J et al. (1 more author) (2018) Development of a preclinical natural porcine knee simulation model for the tribological assessment of osteochondral grafts in vitro. Journal of Biomechanics, 77. pp. 91-98. ISSN 0021-9290

Bowland, P, Ingham, E, Jennings, LM et al. (1 more author) (2015) Review of the biomechanics and biotribology of osteochondral grafts used for surgical interventions in the knee. Proceedings of the Institution of Mechanical Engineers, 229 (12). 879 - 888. ISSN 0954-4119

Bowland, P, Ingham, E orcid.org/0000-0002-9757-3045, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2018) Simple geometry tribological study of osteochondral graft implantation in the knee. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (3). pp. 249-256. ISSN 0954-4119

Brew, A., O’Beirne, S. orcid.org/0000-0001-7636-6015, Johnson, M.J. orcid.org/0000-0001-6204-9158 et al. (6 more authors) (2023) Airflow rates and breathlessness recovery from submaximal exercise in healthy adults: prospective, randomised, cross-over study. BMJ Supportive & Palliative Care. ISSN 2045-435X

Brockett, C orcid.org/0000-0002-6664-7259, Abdelgaied, A, Haythornthwaite, T et al. (3 more authors) (2016) The influence of simulator input conditions on the wear of total knee replacements: An experimental and computational study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 429-439. ISSN 0954-4119

Brockett, C orcid.org/0000-0002-6664-7259, Williams, S orcid.org/0000-0002-6963-965X, Jin, Z et al. (2 more authors) (2007) Friction of Total Hip Replacements With Different Bearings and Loading Conditions. Journal of Biomedical Materials Research, 81B (2). pp. 508-515. ISSN 0021-9304

Brockett, CL orcid.org/0000-0002-6664-7259, Carbone, S, Abdelgaied, A orcid.org/0000-0003-0066-1688 et al. (2 more authors) (2016) Influence of contact pressure, cross-shear and counterface material on the wear of PEEK and CFR-PEEK for orthopaedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 63. pp. 10-16. ISSN 1751-6161

Brockett, CL orcid.org/0000-0002-6664-7259, Carbone, S, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2018) Influence of conformity on the wear of total knee replacement: An experimental study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (2). pp. 127-134. ISSN 0954-4119

Brockett, CL orcid.org/0000-0002-6664-7259, Carbone, S, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2017) PEEK and CFR-PEEK as alternative bearing materials to UHMWPE in a fixed bearing total knee replacement: An experimental wear study. Wear, 374-37. pp. 86-91. ISSN 0043-1648

Brockett, CL orcid.org/0000-0002-6664-7259 and Chapman, GJ orcid.org/0000-0003-3983-6641 (2016) Biomechanics of the Ankle. Orthopaedics and Trauma, 30 (3). pp. 232-238. ISSN 1877-1327

Brockett, CL, Harper, P, Williams, S et al. (4 more authors) (2008) The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements. Journal of Materials Science: Materials in Medicine, 19 (4). 1575 - 1579. ISSN 0957-4530

Brockett, CL orcid.org/0000-0002-6664-7259, Jennings, LM and Fisher, J (2012) Wear of knee prostheses. Orthopedic Research and Reviews, 4. pp. 19-26. ISSN 1179-1462

Brockett, CL orcid.org/0000-0002-6664-7259, Jennings, LM orcid.org/0000-0003-1446-4511 and Fisher, J orcid.org/0000-0003-3833-3700 (2011) The wear of fixed and mobile bearing unicompartmental knee replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (H5). pp. 511-519. ISSN 0954-4119

Brockett, CL orcid.org/0000-0002-6664-7259, Jennings, LM orcid.org/0000-0003-1446-4511, Hardaker, C et al. (1 more author) (2012) Wear of moderately cross-linked polyethylene in fixed-bearing total knee replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (7). pp. 529-535. ISSN 0954-4119

Brockett, CL orcid.org/0000-0002-6664-7259, John, G, Williams, S orcid.org/0000-0002-6963-965X et al. (3 more authors) (2012) Wear of ceramic-on-carbon fiber-reinforced poly-ether ether ketone hip replacements. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 100B (6). pp. 1459-1465. ISSN 1552-4973

Brockett, CL, Williams, S, Jin, Z et al. (2 more authors) (2013) Squeaking Hip Arthroplasties: A Tribological Phenomenon. Journal of Arthroplasty, 28 (1). pp. 90-97. ISSN 0883-5403

Brockett, CL orcid.org/0000-0002-6664-7259, Williams, S orcid.org/0000-0002-6963-965X, Jin, Z et al. (2 more authors) (2007) A comparison of friction in 28 mm conventional and 55 mm resurfacing metal-on-metal hip replacements. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 221 (3). pp. 391-398. ISSN 1350-6501

Budenberg, S, Redmond, A orcid.org/0000-0002-8709-9992, White, D et al. (4 more authors) (2012) Contact surface motion paths associated with leg length inequality following unilateral total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (12). pp. 968-974. ISSN 0954-4119

Burton, A, Williams, S, Brockett, CL orcid.org/0000-0002-6664-7259 et al. (1 more author) (2012) In Vitro Comparison of Fixed- and Mobile Meniscal-Bearing Unicondylar Knee Arthroplasties. Journal of Arthroplasty, 27 (8). pp. 1452-1459. ISSN 0883-5403

Capel, AJ, Wright, A, Harding, MJ et al. (6 more authors) (2017) 3D printed fluidics with embedded analytic functionality for automated reaction optimisation. Beilstein Journal of Organic Chemistry, 13. pp. 111-119. ISSN 1860-5397

Casper-Taylor, ME, Barr, AJ, Williams, S orcid.org/0000-0002-6963-965X et al. (2 more authors) (2020) Initiating factors for the onset of OA: A systematic review of animal bone and cartilage pathology in OA. Journal of Orthopaedic Research, 38 (8). pp. 1810-1818. ISSN 0736-0266

Chen, X, Jia, P, Wang, Y et al. (4 more authors) (2018) A surface-based approach to determine key spatial parameters of the acetabulum in a standardized pelvic coordinate system. Medical Engineering & Physics, 52. pp. 22-30. ISSN 1350-4533

Chen, Z and Jin, Z (2016) Prediction of in-vivo kinematics and contact track of total knee arthroplasty during walking. Biosurface and Biotribology, 2 (3). pp. 86-94. ISSN 2405-4518

Chen, Z, Wang, L, Liu, Y et al. (4 more authors) (2015) Effect of Component Mal-Rotation on Knee Loading in Total Knee Arthroplasty Using Multi-Body Dynamics Modeling Under a Simulated Walking Gait. Journal of Orthopaedic Research, 33 (9). pp. 1287-1296. ISSN 0736-0266

Chowdury, JMY, Lineham, B, Pallett, M et al. (3 more authors) (2021) Comparison of Mechanical Performance between Circular Frames and Biplanar Distraction Devices for Knee Joint Distraction. Strategies in Trauma and Limb Reconstruction, 16 (2). pp. 71-77. ISSN 1828-8928

Clark, ER, Helliwell, RJ, Bailey, MA orcid.org/0000-0001-5038-1970 et al. (7 more authors) (2022) Preservation of Smooth Muscle Cell Integrity and Function: A Target for Limiting Abdominal Aortic Aneurysm Expansion? Cells, 11 (6). 1043. ISSN 2073-4409

Cooper, RJ, Mengoni, M orcid.org/0000-0003-0986-2769, Groves, D orcid.org/0000-0002-4834-8503 et al. (4 more authors) (2017) Three-dimensional assessment of impingement risk in geometrically parameterised hips compared with clinical measures. International Journal for Numerical Methods in Biomedical Engineering, 33 (11). e2867. ISSN 2040-7939

Cooper, RJ orcid.org/0000-0001-5255-1486, Wilcox, RK orcid.org/0000-0003-2736-7104 and Jones, AC orcid.org/0000-0002-4984-7507 (2019) Finite element models of the tibiofemoral joint: A review of validation approaches and modelling challenges. Medical Engineering & Physics, 74. pp. 1-12. ISSN 1350-4533

Cooper, RJ, Williams, S orcid.org/0000-0002-6963-965X, Mengoni, M orcid.org/0000-0003-0986-2769 et al. (1 more author) (2018) Patient-specific parameterised cam geometry in finite element models of femoroacetabular impingement of the hip. Clinical Biomechanics, 54. pp. 62-70. ISSN 0268-0033

Cooper, RJ orcid.org/0000-0001-5255-1486, Liu, A, Day, GA orcid.org/0000-0003-2197-8318 et al. (4 more authors) (2020) Development of robust finite element models of porcine tibiofemoral joints loaded under varied flexion angles and tibial freedoms. Journal of the Mechanical Behavior of Biomedical Materials, 109. 103797. ISSN 1751-6161

Cowie, RM orcid.org/0000-0003-3903-5916, Adam, B, Fisher, J et al. (1 more author) (2019) Wear and Friction of UHMWPE-on-PEEK OPTIMA™. Journal of the Mechanical Behavior of Biomedical Materials, 89. pp. 65-71. ISSN 1751-6161

Cowie, RM orcid.org/0000-0003-3903-5916, Aiken, SS, Cooper, JJ et al. (1 more author) (2019) The influence of a calcium sulphate bone void filler on the third-body damage and polyethylene wear of total knee arthroplasty. Bone & Joint Research, 8 (2). pp. 65-72. ISSN 2046-3758

Cowie, RM orcid.org/0000-0003-3903-5916, Briscoe, A, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2016) PEEK-OPTIMA as an alternative to cobalt chrome in the femoral component of total knee replacement: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (11). pp. 1008-1015. ISSN 0954-4119

Cowie, RM orcid.org/0000-0003-3903-5916, Carbone, S, Aiken, S et al. (2 more authors) (2016) Influence of third-body particles originating from bone void fillers on the wear of ultra-high-molecular-weight polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (8). pp. 775-783. ISSN 0954-4119

Cowie, RM orcid.org/0000-0003-3903-5916, Pallem, NM, Briscoe, A et al. (1 more author) (2020) Third body wear of UHMWPE-on-PEEK-OPTIMA. Materials, 13 (6). 1264. ISSN 1996-1944

Cowie, R.M., Briscoe, A. orcid.org/0000-0002-8241-2353 and Jennings, L.M. orcid.org/0000-0003-1446-4511 (2023) The influence of cross shear and contact pressure on the wear of UHMWPE-on-PEEK-OPTIMA™ for use in total knee replacement. Journal of the Mechanical Behavior of Biomedical Materials, 148. 106196. ISSN 1751-6161

Cowie, R.M. orcid.org/0000-0003-3903-5916, Briscoe, A. orcid.org/0000-0002-8241-2353 and Jennings, L.M. orcid.org/0000-0003-1446-4511 (2023) The influence of lubricant temperature on the wear of total knee replacements. Biosurface and Biotribology, 9 (3). pp. 71-77. ISSN 2405-4518

Cowie, R.M. orcid.org/0000-0003-3903-5916, Cullum, C.J., Collins, S.N. et al. (1 more author) (2024) The wear and kinematics of two medially stabilised total knee replacement systems. The Knee, 47. pp. 160-170. ISSN 0968-0160

Cowie, R.M. orcid.org/0000-0003-3903-5916, Macri-Pellizzeri, L., McLaren, J. orcid.org/0000-0001-5662-1429 et al. (7 more authors) (2024) Functional performance of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold: a pre-clinical <i>in vitro</i> tribological study. Royal Society Open Science, 11 (1). 230431. ISSN 2054-5703

Cowie, RM orcid.org/0000-0003-3903-5916, Bowland, P, Baji, D et al. (4 more authors) (2021) An experimental simulation model to assess wear of the porcine patellofemoral joint. PLoS One, 16 (4). e0250077. ISSN 1932-6203

Cowie, RM orcid.org/0000-0003-3903-5916 and Jennings, LM orcid.org/0000-0003-1446-4511 (2021) Third body damage and wear in arthroplasty bearing materials: A review of laboratory methods. Biomaterials and Biosystems, 4. 100028. p. 100028. ISSN 2666-5344

Cox, P.G. orcid.org/0000-0001-9782-2358 and Watson, P.J. orcid.org/0000-0003-0220-2960 (2023) Masticatory biomechanics of red and grey squirrels (Sciurus vulgaris and Sciurus carolinensis) modelled with multibody dynamics analysis. Royal Society Open Science, 10 (2). ISSN 2054-5703

Crossland, SR, Siddle, HJ orcid.org/0000-0002-6015-332X, Culmer, P orcid.org/0000-0003-2867-0420 et al. (1 more author) (2022) A plantar surface shear strain methodology utilising Digital Image Correlation. Journal of the Mechanical Behavior of Biomedical Materials, 136. 105482. ISSN 1751-6161

Culbert, MP orcid.org/0000-0002-4147-8292, Warren, JP orcid.org/0000-0002-0039-5730, Dixon, AR et al. (3 more authors) (2021) Evaluation of injectable nucleus augmentation materials for the treatment of intervertebral disc degeneration. Biomaterials Science. ISSN 2047-4830

Dahabreh, Z, Phillips, HK, Stewart, T et al. (1 more author) (2014) The effect of application time of two types of bone cement on the cement-bone interface strength. European Journal of Orthopaedic Surgery & Traumatology. ISSN 1633-8065

Damion, RA, Pawaskar, SS, Ries, ME et al. (4 more authors) (2012) Spin-lattice relaxation rates and water content of freeze-dried articular cartilage. Osteoarthritis Cartilage, 20 (2). 184 - 190. ISSN 1063-4584

Day, GA orcid.org/0000-0003-2197-8318, Jones, AC orcid.org/0000-0002-4984-7507 and Wilcox, RK orcid.org/0000-0003-2736-7104 (2020) Optimizing computational methods of modeling vertebroplasty in experimentally augmented human lumbar vertebrae. JOR Spine, 3 (1). e1077. ISSN 2572-1143

Day, G.A. orcid.org/0000-0003-2197-8318, Jones, A.C., Mengoni, M. et al. (1 more author) (2024) A Finite Element Model to Investigate the Stability of Osteochondral Grafts Within a Human Tibiofemoral Joint. Annals of Biomedical Engineering. ISSN 0090-6964

Day, GA orcid.org/0000-0003-2197-8318, Cooper, RJ orcid.org/0000-0001-5255-1486, Jones, AC orcid.org/0000-0002-4984-7507 et al. (2 more authors) (2022) Development of robust finite element models to investigate the stability of osteochondral grafts within porcine femoral condyles. Journal of the Mechanical Behavior of Biomedical Materials. 105411. ISSN 1751-6161

Day, GA orcid.org/0000-0003-2197-8318, Jones, AC and Wilcox, RK orcid.org/0000-0003-2736-7104 (2022) Using Statistical Shape and Appearance Modelling to characterise the 3D shape and material properties of human lumbar vertebrae: A proof of concept study. Journal of the Mechanical Behavior of Biomedical Materials, 126. 105047. ISSN 1751-6161

Desai, A orcid.org/0000-0001-8611-9958, Vafaee, T, Rooney, P et al. (5 more authors) (2018) In vitro biomechanical and hydrodynamic characterisation of decellularised human pulmonary and aortic roots. Journal of the Mechanical Behavior of Biomedical Materials, 79. pp. 53-63. ISSN 1751-6161

Desai, A, Ingham, E, Berry, HE orcid.org/0000-0003-2426-1881 et al. (2 more authors) (2022) The effect of decellularisation on the real time mechanical fatigue of porcine aortic heart valve roots. PLOS ONE, 17 (4). e0265763. ISSN 1932-6203

Ding, S., Liu, G., Xu, F. et al. (7 more authors) (2023) The satisfaction of elderly people with elderly caring social organizations and its relationship with social support and anxiety during the COVID-19 pandemic: a cross-sectional study. BMC Public Health, 23. 1206. ISSN 1471-2458

Dixon, AR, Warren, JP, Culbert, MP et al. (2 more authors) (2021) Review of in vitro mechanical testing for intervertebral disc injectable biomaterials. Journal of the Mechanical Behavior of Biomedical Materials. 104703. ISSN 1751-6161

Dutel, H. orcid.org/0000-0002-1908-5150, Gröning, F. orcid.org/0000-0002-8127-4112, Sharp, A.C. orcid.org/0000-0001-5117-5335 et al. (6 more authors) (2021) Comparative cranial biomechanics in two lizard species: impact of variation in cranial design. Journal of Experimental Biology, 224 (5). jeb234831. ISSN 0022-0949

Edwards, JH, Herbert, A orcid.org/0000-0002-6527-2205, Jones, GL et al. (3 more authors) (2017) The effects of irradiation on the biological and biomechanical properties of an acellular porcine superflexor tendon graft for cruciate ligament repair. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (8). pp. 2477-2486. ISSN 1552-4973

Edwards, JH orcid.org/0000-0003-4152-6140, Ingham, E orcid.org/0000-0002-9757-3045 and Herbert, A orcid.org/0000-0002-6527-2205 (2019) Decellularisation affects the strain rate dependent and dynamic mechanical properties of a xenogeneic tendon intended for anterior cruciate ligament replacement. Journal of the Mechanical Behavior of Biomedical Materials, 91. pp. 18-23. ISSN 1751-6161

Edwards, JH orcid.org/0000-0003-4152-6140, Jones, GL, Herbert, A orcid.org/0000-0002-6527-2205 et al. (2 more authors) (2021) Integration and functional performance of a decellularised porcine superflexor tendon graft in an ovine model of anterior cruciate ligament reconstruction. Biomaterials, 279. 121204. ISSN 0142-9612

El-Jawhari, JJ orcid.org/0000-0002-0580-4492, Brockett, CL orcid.org/0000-0002-6664-7259, Ktistakis, I et al. (2 more authors) (2018) The regenerative therapies of the ankle degeneration; A focus on multipotential mesenchymal stromal cell application. Regenerative Medicine, 13 (2). pp. 175-188. ISSN 1746-0751

Elson, KM, Fox, N, Tipper, JL et al. (4 more authors) (2015) Non-destructive monitoring of viability in an ex vivo organ culture model of osteochondral tissue. eCells and Materials Journal, 29. 356 - 369. ISSN 1473-2262

Ercan, R., Xia, Y., Zhao, Y. et al. (3 more authors) (2024) An Ultra-low-power Real-time Machine Learning based fNIRS Motion Artefacts Detection. IEEE Transactions on Very Large Scale Integration (VLSI) Systems. ISSN 1063-8210 (In Press)

Eren, OC, Curzen, N and Bressloff, NW (2022) Magnetic retrieval of prosthetic heart valves for redo-TAVI. Medical Engineering & Physics, 101. 103761. ISSN 1350-4533

Etchels, L orcid.org/0000-0001-5424-7226, Wang, L, Al-Hajjar, M orcid.org/0000-0001-5008-6138 et al. (5 more authors) (2019) Computationally efficient modelling of hip replacement separation due to small mismatches in component centres of rotation. Journal of Biomechanics, 95. 109296. ISSN 0021-9290

Etchels, L orcid.org/0000-0001-5424-7226, Wang, L orcid.org/0000-0003-3779-8258, Thompson, J orcid.org/0000-0002-2152-0764 et al. (2 more authors) (2023) Dynamic finite element analysis of hip replacement edge loading: Balancing precision and run time in a challenging model. Journal of the Mechanical Behavior of Biomedical Materials, 143. 105865. ISSN 1751-6161

Fermor, HL, McLure, SWD, Taylor, SD et al. (4 more authors) (2015) Biological, biochemical and biomechanical characterisation of articular cartilage from the porcine, bovine and ovine hip and knee. Bio-Medical Materials and Engineering, 25 (4). 381 - 395. ISSN 0959-2989

Fermor, HL, Russell, SL, Williams, S et al. (2 more authors) (2015) Development and characterisation of a decellularised bovine osteochondral biomaterial for cartilage repair. Journal of Materials Science: Materials in Medicine, 26 (5). 5517 - ?. ISSN 0957-4530

Fisher, J (2013) Regeneration Man. EPSRC Pioneer Magazine, 11 (Winter). 32 - 35 (4).

Frangi, AF, Taylor, ZA orcid.org/0000-0002-0718-1663 and Gooya, A (2016) Precision Imaging: more descriptive, predictive and integrative imaging. Medical Image Analysis, 33. pp. 27-32. ISSN 1361-8415

Gao, Y, Chai, W, Wang, L et al. (2 more authors) (2016) Effect of friction and clearance on kinematics and contact mechanics of dual mobility hip implant. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 230 (1). pp. 39-49. ISSN 0954-4119

Gao, Y, Jin, Z, Wang, L et al. (1 more author) (2015) Finite element analysis of sliding distance and contact mechanics of hip implant under dynamic walking conditions. Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, 229 (6). 469 - 474. ISSN 0954-4119

Gao, L., Lu, X., Zhang, X. et al. (2 more authors) (2022) Lubrication Modelling of Artificial Joint Replacements: Current Status and Future Challenges. Lubricants, 10 (10). 238. ISSN 2075-4442

Goulas, A, Binner, JGP, Harris, RA orcid.org/0000-0002-3425-7969 et al. (1 more author) (2017) Assessing extraterrestrial regolith material simulants for in-situ resource utilization based 3D printing. Applied Materials Today, 6. pp. 54-61. ISSN 2352-9407

Goulas, A, Harris, RA orcid.org/0000-0002-3425-7969 and Friel, RJ (2016) Additive manufacturing of physical assets by using ceramic multicomponent extra-terrestrial materials. Additive Manufacturing, 10. pp. 36-42.

Graham, SM, Mak, JH, Moazen, M et al. (4 more authors) (2015) Periprosthetic femoral fracture fixation: A biomechanical comparison between proximal locking screws and cables. Journal of Orthopaedic Science, 20 (5). pp. 875-880. ISSN 0949-2658

Groves, D orcid.org/0000-0002-4834-8503, Fisher, J and Williams, S (2017) An In vitro Simulation Method for the Tribological Assessment of Complete Natural Hip Joints. PLoS ONE, 12 (9). e0184226. ISSN 1932-6203

Guo, L, Vardakis, JC, Lassila, T et al. (11 more authors) (2018) Subject-specific multi-poroelastic model for exploring the risk factors associated with the early stages of Alzheimer's disease. Interface Focus, 8 (1). ARTN 20170019. ISSN 2042-8898

Hadley, M, Hardaker, C, Isaac, G et al. (1 more author) (2018) Wear of different materials for total hip replacement under adverse stop-dwell-start in vitro wear simulation conditions. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 232 (12). pp. 1261-1270. ISSN 0954-4119

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2015) Design of bifurcation junctions in artificial vascular vessels additively manufactured for skin tissue engineering. Journal of Visual Languages & Computing, 28. pp. 238-249. ISSN 1045-926X

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2016) Engineering design of artificial vascular junctions for 3D printing. Biofabrication, 8 (2). 025018. ISSN 1758-5082

Han, Y, Meng, Q orcid.org/0000-0002-6708-5585 and de Boer, G orcid.org/0000-0002-5647-1771 (2022) Two-scale homogenization of hydrodynamic lubrication in a mechanical seal with isotropic roughness based on the Elrod cavitation algorithm. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236 (3). pp. 359-385. ISSN 1350-6501

Harwood, PJ and Stewart, TD (2016) Mechanics of musculoskeletal repair devices. Orthopaedics and Trauma, 30 (3). pp. 192-200. ISSN 1877-1327

Hasan, J, Fisher, J and Ingham, E (2014) Current strategies in meniscal regeneration. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 102 (3). 619 - 634. ISSN 1552-4973

Helliwell, J, Thomas, D orcid.org/0000-0001-5584-9114, Papathanasiou, V et al. (6 more authors) (2017) Development and characterisation of a low concentration SDS decellularised porcine dermis. Journal of Tissue Engineering, 8. ISSN 2041-7314

Henderson, DJ, Rushbrook, JL, Harwood, PJ et al. (1 more author) (2017) What Are the Biomechanical Properties of the Taylor Spatial Frame™? Clinical Orthopaedics and Related Research®, 475 (5). pp. 1472-1482. ISSN 0009-921X

Henderson, DJ, Rushbrook, JL, Stewart, TD et al. (1 more author) (2016) What Are the Biomechanical Effects of Half-pin and Fine-wire Configurations on Fracture Site Movement in Circular Frames? Clinical Orthopaedics and Related Research, 474 (1). pp. 1041-1049. ISSN 0009-921X

Herbert, A, Brown, C, Rooney, P et al. (3 more authors) (2016) Bi-linear mechanical property determination of acellular human patellar tendon grafts for use in anterior cruciate ligament replacement. Journal of Biomechanics, 49 (9). pp. 1607-1612. ISSN 0021-9290

Herbert, A orcid.org/0000-0002-6527-2205, Edwards, JH, Jones, GL et al. (2 more authors) (2017) The effects of irradiation dose and storage time following treatment on the viscoelastic properties of decellularised porcine super flexor tendon. Journal of Biomechanics, 57. pp. 157-160. ISSN 0021-9290

Herbert, A orcid.org/0000-0002-6527-2205, Jones, GL, Ingham, E orcid.org/0000-0002-9757-3045 et al. (1 more author) (2015) A biomechanical characterisation of acellular porcine super flexor tendons for use in anterior cruciate ligament replacement: Investigation into the effects of fat reduction and bioburden reduction bioprocesses. Journal of Biomechanics, 48 (1). pp. 22-29. ISSN 0021-9290

Holub, O, Lopez, A, Borse, V et al. (4 more authors) (2015) Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study. Journal of Biomechanics, 48 (12). pp. 3258-3266. ISSN 0021-9290

Hua, R, Pozo, JM, Taylor, ZA orcid.org/0000-0002-0718-1663 et al. (1 more author) (2017) Multiresolution eXtended Free-Form Deformations (XFFD) for non-rigid registration with discontinuous transforms. Medical Image Analysis, 36. pp. 113-122. ISSN 1361-8415

Hua, X, Li, J, Jin, Z et al. (1 more author) (2016) Erratum: Corrigendum to “The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities.” (Medical Engineering & Physics (2016) 38(6) (518–525)). Medical Engineering and Physics, 38 (8). p. 826. ISSN 1350-4533

Hua, X, Li, J, Jin, Z et al. (1 more author) (2016) The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities. Medical Engineering and Physics, 38 (6). pp. 518-525. ISSN 1350-4533

Hua, X, Li, J, Wang, L et al. (3 more authors) (2014) Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions. Journal of Biomechanics, 47 (13). pp. 3303-3309. ISSN 0021-9290

Hua, X, Li, J, Wang, L et al. (3 more authors) (2015) The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements. MEDICAL ENGINEERING & PHYSICS, 37 (10). pp. 1008-1014. ISSN 1350-4533

Hua, X, Li, J, Wilcox, RK et al. (2 more authors) (2015) Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: An initial study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (8). pp. 570-580. ISSN 0954-4119

Hua, X, Wang, L, Al-Hajjar, M et al. (3 more authors) (2014) Experimental validation of finite element modelling of a modular metal-on-polyethylene total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (7). 682 - 692. ISSN 0954-4119

Hua, X, Wroblewski, BM, Jin, Z et al. (1 more author) (2012) The effect of cup inclination and wear on the contact mechanics and cement fixation for ultra high molecular weight polyethylene total hip replacements. Medical Engineering and Physics, 34 (3). 318 - 325. ISSN 1350-4533

Hyde, PJ, Fisher, J orcid.org/0000-0003-3833-3700 and Hall, RM (2017) Wear characteristics of an unconstrained lumbar total disc replacement under a range of in vitro test conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (1). pp. 46-52. ISSN 1552-4973

Hyde, PJ, Tipper, JL, Fisher, J et al. (1 more author) (2015) Wear and biological effects of a semi-constrained total disc replacement subject to modified ISO standard test conditions. Journal of the Mechanical Behavior of Biomedical Materials, 44. pp. 43-52. ISSN 1751-6161

Jahani, F, Etchels, LW, Wang, L et al. (5 more authors) (2021) Importance of dynamics in the finite element prediction of plastic damage of polyethylene acetabular liners under edge loading conditions. Medical Engineering & Physics. ISSN 1350-4533

James, N.D., Ali, A., Pope, A. et al. (5 more authors) (2022) Cabazitaxel versus docetaxel for treatment of metastatic castrate refractory prostate cancer. BJUI Compass, 3 (6). pp. 484-493. ISSN 2688-4526

James, N.D., Liu, W., Pirrie, S. orcid.org/0000-0002-2894-2230 et al. (9 more authors) (2022) TUXEDO: a phase I/II trial of cetuximab with chemoradiotherapy in muscle-invasive bladder cancer. BJU International, 131 (1). pp. 63-72. ISSN 1464-4096

Jennings, LM, Al-Hajjar, M, Brockett, CL et al. (4 more authors) (2012) (iv) Enhancing the safety and reliability of joint replacement implants. Orthopaedics and Trauma, 26 (4). 246 - 252. ISSN 1877-1327

Ji, Y., Yang, S. orcid.org/0000-0003-0531-2903, Zhou, K. et al. (6 more authors) (2022) Deep-learning approach for automated thickness measurement of epithelial tissue and scab using optical coherence tomography. Journal of Biomedical Optics, 27 (1). 015002. ISSN 1083-3668

Jia, T, Taylor, ZA and Chen, X (2021) Long term and robust 6DoF motion tracking for highly dynamic stereo endoscopy videos. Computerized Medical Imaging and Graphics, 94. 101995. ISSN 0895-6111

Jimenez-Cruz, D orcid.org/0000-0001-6934-2859, Dubey, M, Board, T et al. (1 more author) (2022) An in vitro methodology for experimental simulation on the natural hip joint. PLoS ONE, 17 (8). e0272264. ISSN 1932-6203

Jin, ZM, Zheng, J, Li, W et al. (1 more author) (2016) Tribology of Medical Devices. Biosurface and Biotribology, 2 (4). pp. 173-192. ISSN 2405-4518

Joda, A, Jin, Z, Haverich, A et al. (2 more authors) (2016) Multiphysics simulation of the effect of leaflet thickness inhomogeneity and material anisotropy on the stress-strain distribution on the aortic valve. Journal of Biomechanics, 49 (12). pp. 2502-2512. ISSN 0021-9290

Johnston, H, Abdelgaied, A, Pandit, H orcid.org/0000-0001-7392-8561 et al. (2 more authors) (2018) Representing the Effect of Variation in Soft Tissue Constraints in Experimental Simulation of Total Knee Replacements. Journal of the Mechanical Behavior of Biomedical Materials, 87. pp. 87-94. ISSN 1751-6161

Johnston, H, Abdelgaied, A, Pandit, H orcid.org/0000-0001-7392-8561 et al. (2 more authors) (2019) The effect of surgical alignment and soft tissue conditions on the kinematics and wear of a fixed bearing total knee replacement. Journal of the Mechanical Behavior of Biomedical Materials, 100. ARTN 103386. ISSN 1751-6161

Joldes, GR, Noble, C, Polzer, S et al. (3 more authors) (2018) A simple method of incorporating the effect of the uniform stress hypothesis in arterial wall stress computations. Acta of Bioengineering and Biomechanics, 20 (3). pp. 59-67. ISSN 1509-409X

Jones, AC orcid.org/0000-0002-4984-7507, Stewart, TD, Maher, N et al. (1 more author) (2023) Can a Computational Model Predict the Effect of Lesion Location on Cam-type Hip Impingement? Clinical Orthopaedics and Related Research. ISSN 0009-921X

Jones, G, Herbert, A orcid.org/0000-0002-6527-2205, Berry, H orcid.org/0000-0003-2426-1881 et al. (3 more authors) (2017) Decellularization and Characterization of Porcine Superflexor Tendon: A Potential Anterior Cruciate Ligament Replacement. Tissue Engineering Part A, 23 (3-4). pp. 124-134. ISSN 1937-3341

Jones, WG, El-Jawhari, JJ, Brockett, CL orcid.org/0000-0002-6664-7259 et al. (3 more authors) (2021) Multipotential Stromal Cells in the Talus and Distal Tibia in Ankle Osteoarthritis – Presence, Potency and Relationships to Subchondral Bone Changes. Journal of Cellular and Molecular Medicine, 25 (1). pp. 259-271. ISSN 1582-1838

Kapadia, D, Racasan, R, Pagani, L et al. (2 more authors) (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376–37 (Part A). pp. 236-242. ISSN 0043-1648

Kassab-Bachi, A orcid.org/0000-0001-7601-2532, Ravikumar, N orcid.org/0000-0003-0134-107X, Wilcox, RK orcid.org/0000-0003-2736-7104 et al. (2 more authors) (2023) Correction: Contribution of Shape Features to Intradiscal Pressure and Facets Contact Pressure in L4/L5 FSUs: An In-Silico Study. Annals of Biomedical Engineering, 51 (3). p. 642. ISSN 0090-6964

Kay, RW, Cummins, G, Krebs, T et al. (3 more authors) (2014) Statistical analysis of stencil technology for wafer-level bumping. Soldering & Surface Mount Technology, 26 (2). pp. 71-78. ISSN 0954-0911

Koh, J., Diaz, R.L., Tafur, J.C. et al. (3 more authors) (2022) Small Chondral Defects Affect Tibiofemoral Contact Area and Stress: Should a Lower Threshold Be Used for Intervention? Orthopaedic Journal of Sports Medicine, 10 (11). 23259671221129308. ISSN 2325-9671

Koria, L orcid.org/0000-0002-0715-7399, Mengoni, M orcid.org/0000-0003-0986-2769 and Brockett, C (2020) Estimating tissue-level properties of porcine talar subchondral bone. Journal of the Mechanical Behavior of Biomedical Materials. 103931. ISSN 1751-6161

Lamb, JN orcid.org/0000-0002-0166-9406, Coltart, O, Adekanmbi, I et al. (2 more authors) (2021) Calcar-Collar Contact during Simulated Periprosthetic Femoral Fractures Increases Resistance to Fracture and Depends on the Initial Separation on Implantation: A Composite Femur in vitro study. Clinical Biomechanics, 87. 105411. ISSN 0268-0033

Lamb, JN, Coltart, O, Adekanmbi, I et al. (2 more authors) (2022) Comparison of axial-rotational postoperative periprosthetic fracture of the femur in composite osteoporotic femur versus human cadaveric specimens: A validation study. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 236 (7). pp. 973-978. ISSN 0954-4119

Laurent, C, Bohme, B, Mengoni, M et al. (3 more authors) (2016) Prediction of the mechanical response of canine humerus to three-point bending using subject-specific finite element modelling. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (7). pp. 639-649. ISSN 0954-4119

Layton, RB, Stewart, TD orcid.org/0000-0002-6868-9938, Harwood, P et al. (1 more author) (2018) Biomechanical analysis of walking gait when simulating the use of an Ilizarov external fixator. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (6). pp. 628-636. ISSN 0954-4119

Layton, R, Messenger, N and Stewart, T orcid.org/0000-0002-6868-9938 (2022) Characteristics of hip joint reaction forces during a range of activities. Medical Engineering and Physics, 108. 103894. ISSN 1350-4533

Layton, RB, Messenger, N and Stewart, TD orcid.org/0000-0002-6868-9938 (2021) Analysis of hip joint cross-shear under variable activities using a novel virtual joint model within Visual3D. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Lee, C, Natarajan, S, Hale, JS et al. (3 more authors) (2021) Bubble-Enriched Smoothed Finite Element Methods for Nearly-Incompressible Solids. Computer Modeling in Engineering & Sciences, 127 (2). pp. 411-436. ISSN 1526-1492

Lekadir, K, Noble, C, Hazrati-Marangalou, J et al. (4 more authors) (2016) Patient-Specific Biomechanical Modeling of Bone Strength Using Statistically-Derived Fabric Tensors. Annals of Biomedical Engineering, 44 (1). pp. 234-246. ISSN 0090-6964

Leng, J, Al-Hajjar, M, Wilcox, R et al. (3 more authors) (2017) Dynamic virtual simulation of the occurrence and severity of edge loading in hip replacements associated with variation in the rotational and translational surgical position. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (4). pp. 299-306. ISSN 0954-4119

Li, J, Hua, X, Jin, Z et al. (2 more authors) (2014) Biphasic investigation of contact mechanics in natural human hips during activities. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (6). 556 - 563. ISSN 2041-3033

Li, J, Hua, X, Jin, Z et al. (2 more authors) (2014) Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: A finite element study with biphasic acetabular cartilage properties. Medical Engineering and Physics, 36 (11). 1449 - 1454. ISSN 1350-4533

Li, J, Hua, X, Jones, AC orcid.org/0000-0002-4984-7507 et al. (4 more authors) (2016) The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint. Journal of Biomechanics, 49 (9). pp. 1679-1685. ISSN 0021-9290

Li, J, McWilliams, AB, Jin, Z et al. (4 more authors) (2015) Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking. Clinical Biomechanics, 30 (5). 513 - 519. ISSN 0268-0033

Li, J, Monaghan, T, Masurtschak, S et al. (3 more authors) (2015) Exploring the mechanical strength of additively manufactured metal structures with embedded electrical materials. Materials Science and Engineering: A, 639. pp. 474-481. ISSN 0921-5093

Li, J, Monaghan, T, Nguyen, TT et al. (3 more authors) (2017) Multifunctional metal matrix composites with embedded printed electrical materials fabricated by Ultrasonic Additive Manufacturing. Composites Part B: Engineering, 113. pp. 342-354. ISSN 1359-8368

Li, J, Redmond, AC, Jin, Z et al. (3 more authors) (2014) Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing. Clinical Biomechanics, 29 (7). 747 - 751. ISSN 0268-0033

Li, J, Stewart, TD, Jin, Z et al. (2 more authors) (2013) The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers. Journal of Biomechanics, 46 (10). 1641 - 1647. ISSN 0021-9290

Li, J, Wang, Q, Jin, Z et al. (3 more authors) (2014) Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (6). pp. 547-555. ISSN 0954-4119

Li, W., Liu, X., Meng, Q. orcid.org/0000-0002-6708-5585 et al. (3 more authors) (2023) Effects of Oil Supply Condition on Spinning–Sliding EHL. Lubricants, 11 (10). 451. ISSN 2075-4442

Lin, W, Meng, Q orcid.org/0000-0002-6708-5585, Li, J et al. (2 more authors) (2021) The effect of highly inhomogeneous biphasic properties on mechanical behaviour of articular cartilage. Computer Methods and Programs in Biomedicine, 206. 106122. ISSN 0169-2607

Lineham, B, Stewart, T orcid.org/0000-0002-6868-9938 and Harwood, P (2018) Measurement of wire deflection on loading may indicate union in Ilizarov constructs, an in vitro model. Strategies in Trauma and Limb Reconstruction, 13 (2). pp. 75-80. ISSN 1828-8936

Lineham, B., Wijayathunga, H. orcid.org/0000-0001-6030-5322, Moran, E. et al. (4 more authors) (2023) A systematic review demonstrating correlation of MRI compositional parameters with clinical outcomes following articular cartilage repair interventions in the knee. Osteoarthritis and Cartilage Open, 5 (3). 100388. ISSN 2665-9131

Lineham, B, Stewart, T orcid.org/0000-0002-6868-9938, Ward, J et al. (1 more author) (2022) Measurement of Wire Deflection on Loading may Indicate Union in Ilizarov Constructs: A Pilot Study. Strategies in Trauma and Limb Reconstruction, 16 (3). pp. 132-137. ISSN 1828-8936

Liu, A, Ingham, E orcid.org/0000-0002-9757-3045, Fisher, J et al. (1 more author) (2019) Development of a pre-clinical experimental simulation model of the natural porcine knee with appropriate ligamentous constraints. PLoS ONE, 14 (5). e0216872. ISSN 1932-6203

Liu, A, Jennings, LM, Ingham, E et al. (1 more author) (2015) Tribology studies of the natural knee using an animal model in a new whole joint natural knee simulator. Journal of Biomechanics, 48 (12). 3004 - 3011. ISSN 0021-9290

Liu, A, Richards, L, Bladen, CL et al. (3 more authors) (2015) The Biological Response to Nanometre-sized Polymer Particles. Acta Biomaterialia, 23. pp. 38-51. ISSN 1742-7061

Liu, F and Fisher, J orcid.org/0000-0003-3833-3700 (2017) Effect of an edge at cup rim on contact stress during micro-separation in ceramic-on-ceramic hip joints. Tribology International, 113. pp. 323-329. ISSN 0301-679X

Liu, F, Williams, S and Fisher, J (2014) Effect of microseparation on contact mechanics in metal-on-metal hip replacements-A finite element analysis. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 103 (6). 1312 - 1319. ISSN 1552-4973

Liu, A, Sanderson, WJ orcid.org/0000-0003-0170-9911, Ingham, E orcid.org/0000-0002-9757-3045 et al. (2 more authors) (2020) Development of a specimen-specific in vitro pre-clinical simulation model of the human cadaveric knee with appropriate soft tissue constraints. PLoS One, 15 (10). e0238785. ISSN 1932-6203

Loughenbury, FA, McWilliams, AB, Stewart, TD orcid.org/0000-0002-6868-9938 et al. (2 more authors) (2019) Hip surgeons and leg length inequality after primary hip replacement. HIP International, 29 (1). pp. 102-108. ISSN 1120-7000

Lu, X, Meng, Q orcid.org/0000-0002-6708-5585, Wang, J et al. (1 more author) (2018) Transient viscoelastic lubrication analyses of UHMWPE hip replacements. Tribology International, 128. pp. 271-278. ISSN 0301-679X

Lu, X, Meng, Q orcid.org/0000-0002-6708-5585 and Jin, Z (2021) Effects of UHMWPE viscoelasticity on the squeeze-film lubrication of hip replacements. Biosurface and Biotribology, 7 (2). pp. 60-69. ISSN 2405-4518

Lu, X, Nečas, D, Meng, Q orcid.org/0000-0002-6708-5585 et al. (4 more authors) (2020) Towards the direct validation of computational lubrication modelling of hip replacements. Tribology International, 146. 106240. p. 106240. ISSN 0301-679X

Luo, J, Korossis, SA, Wilshaw, SP et al. (3 more authors) (2014) Development and characterization of acellular porcine pulmonary valve scaffolds for tissue engineering. Tissue engineering. Part A. ISSN 1937-3341

Ma'touq, J, Strauss, DN, Messenger, N et al. (2 more authors) (2014) Spinal angle and foot pressure during cardiac electrophysiological procedures. International Journal of Cardiology, 172 (3). 398 - 400. ISSN 0167-5273

Magee, DR, Song, Y, Gilbert, S et al. (5 more authors) (2015) Histopathology in 3D: from three-dimensional reconstruction to multi-stain and multi-modal analysis. Journal of Pathology Informatics, 6 (6). ISSN 2229-5089

Maiti, R, Cowie, RM orcid.org/0000-0003-3903-5916, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2017) The influence of malalignment and ageing following sterilisation by gamma irradiation in an inert atmosphere on the wear of ultra-high-molecular-weight polyethylene in patellofemoral replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (7). pp. 634-642. ISSN 0954-4119

Maiti, R, Fisher, J, Rowley, LR et al. (1 more author) (2014) The influence of kinematic conditions and design on the wear of patella-femoral replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (2). 175 - 181. ISSN 0954-4119

McGrath, DM, Ravikumar, N, Beltrachini, L et al. (3 more authors) (2017) Evaluation of wave delivery methodology for brain MRE: Insights from computational simulations. Magnetic Resonance in Medicine, 78 (1). pp. 341-356. ISSN 0740-3194

McWilliams, A, Stewart, TD, Grainger, AJ et al. (4 more authors) (2017) Corrigendum to “Leg length inequality following total hip replacement” [Orthopaed Trauma 25 (2011) 37–42]. Orthopaedics and Trauma, 31 (1). p. 57. ISSN 1877-1327

McWilliams, AB, Douglas, SL, Redmond, AC et al. (4 more authors) (2013) Litigation after hip and knee replacement in the national health service. Bone and Joint Journal, 95-B (1). 122 - 126. ISSN 2049-4394

McWilliams, AB, Grainger, AJ, O'Connor, PJ et al. (3 more authors) (2016) Erratum to: Assessing reproducibility for radiographic measurement of leg length inequality after total hip replacement (vol 22, pg 539, 2012). HIP International, 26 (5). p. 513. ISSN 1120-7000

McWilliams, AB, Grainger, AJ, O'Connor, PJ et al. (3 more authors) (2013) A review of symptomatic leg length inequality following total hip arthroplasty. HIP International, 23 (1). 6 - 14. ISSN 1120-7000

McWilliams, AB, Grainger, AJ, O'Connor, PJ et al. (3 more authors) (2012) Assessing reproducibility for radiographic measurement of leg length inequality after total hip replacement. HIP International, 22 (5). pp. 539-544. ISSN 1120-7000

Meng, Q orcid.org/0000-0002-6708-5585, An, S, Damion, RA et al. (4 more authors) (2017) The Effect of Collagen Fibril Orientation on the Biphasic Mechanics of Articular Cartilage. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 439-453. ISSN 1751-6161

Meng, Q orcid.org/0000-0002-6708-5585, Fisher, J orcid.org/0000-0003-3833-3700 and Wilcox, R orcid.org/0000-0003-2736-7104 (2017) The effects of geometric uncertainties on computational modelling of knee biomechanics. Royal Society Open Science, 4 (8).

Meng, Q, Gao, L, Liu, F et al. (3 more authors) (2010) Contact mechanics and elastohydrodynamic lubrication in a novel metal-on-metal hip implant with an aspherical bearing surface. Journal of Biomechanics, 43 (5). 849 - 857.

Meng, Q, Jin, Z, Fisher, J et al. (1 more author) (2013) Comparison between FEBio and Abaqus for biphasic contact problems. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (9). 1009 - 1019. ISSN 0954-4119

Meng, Q, Liu, F, Fisher, J et al. (1 more author) (2013) Effect of simplifications of bone and components inclination on the elastohydrodynamic lubrication modeling of metal-on-metal hip resurfacing prosthesis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (5). 523 - 534. ISSN 0954-4119

Meng, Q, Wang, J, Yang, P et al. (2 more authors) (2015) The lubrication performance of the ceramic-on-ceramic hip implant under starved conditions. Journal of The Mechanical Behavior of Biomedical Materials, 50. 70 - 76. ISSN 1751-6161

Meng, QE, Liu, F, Fisher, J et al. (1 more author) (2011) Transient elastohydrodynamic lubrication analysis of a novel metal-on-metal hip prosthesis with a non-spherical femoral bearing surface. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (1). 25 - 37. ISSN 0954-4119

Mengoni, M orcid.org/0000-0003-0986-2769 (2020) Using inverse Finite Element analysis to identify spinal tissue behaviour in situ. Methods. ISSN 1046-2023

Mengoni, M orcid.org/0000-0003-0986-2769, Jones, AC orcid.org/0000-0002-4984-7507 and Wilcox, RK (2016) Modelling the failure precursor mechanism of lamellar fibrous tissues, example of the annulus fibrosus. Journal of the Mechanical Behavior of Biomedical Materials, 63. pp. 265-272. ISSN 1751-6161

Mengoni, M orcid.org/0000-0003-0986-2769, Luxmoore, BJ, Wijayathunga, VN et al. (3 more authors) (2015) Derivation of inter-lamellar behaviour of the intervertebral disc annulus. Journal of the Mechanical Behavior of Biomedical Materials, 48. pp. 164-172. ISSN 1751-6161

Mengoni, M and Ponthot, JP (2015) An enhanced version of a bone-remodelling model based on the continuum damage mechanics theory. Computer Methods in Biomechanics and Biomedical Engineering, 18 (12). 1367 - 1376. ISSN 1025-5842

Mengoni, M and Ponthot, JP (2015) A generic anisotropic continuum damage model integration scheme adaptable to both ductile damage and biological damage-like situations. International Journal of Plasticity, 66. pp. 46-70. ISSN 0749-6419

Mengoni, M, Ponthot, JP and Boman, R (2016) Mesh management methods in finite element simulations of orthodontic tooth movement. Medical Engineering and Physics, 38 (2). pp. 140-147. ISSN 1350-4533

Mengoni, M orcid.org/0000-0003-0986-2769, Vasiljeva, K, Jones, AC orcid.org/0000-0002-4984-7507 et al. (2 more authors) (2016) Subject-specific multi-validation of a Finite Element model of ovine cervical functional spinal units. Journal of Biomechanics, 49 (2). pp. 259-266. ISSN 0021-9290

Mengoni, M orcid.org/0000-0003-0986-2769 (2021) Biomechanical Modelling of the Facet Joints: a review of methods and validation processes in Finite element analysis. Biomechanics and Modeling in Mechanobiology, 20. pp. 389-401. ISSN 1617-7940

Mengoni, M orcid.org/0000-0003-0986-2769, Kayode, O, Sikora, SNF orcid.org/0000-0002-8560-8837 et al. (3 more authors) (2017) Annulus fibrosus functional extrafibrillar and fibrous mechanical behaviour: experimental and computational characterisation. Royal Society Open Science, 4 (8). 170807. ISSN 2054-5703

Mengoni, M, Zapata-Cornelio, FY, Wijayathunga, VN et al. (1 more author) (2021) Experimental and Computational Comparison of Intervertebral Disc Bulge for Specimen-Specific Model Evaluation Based on Imaging. Frontiers in Bioengineering and Biotechnology, 9. 413. ISSN 2296-4185

Miles, DE, Mitchell, EA, Kapur, N orcid.org/0000-0003-1041-8390 et al. (2 more authors) (2016) Peptide:glycosaminoglycan hybrid hydrogels as an injectable intervention for spinal disc degeneration. Journal of Materials Chemistry B, 4 (19). pp. 3225-3231. ISSN 2050-750X

Moazen, M, Mak, JH, Etchels, LW et al. (4 more authors) (2014) Periprosthetic femoral fracture - a biomechanical comparison between vancouver type B1 and B2 fixation methods. Journal of Arthroplasty, 29 (3). 495 - 500. ISSN 0883-5403

Moazen, M, Mak, JH, Etchels, LW et al. (4 more authors) (2013) The effect of fracture stability on the performance of locking plate fixation in periprosthetic femoral fractures. Journal of Arthroplasty, 28 (9). 1589 - 1595. ISSN 0883-5403

Moazen, M, Mak, JH, Jones, AC et al. (3 more authors) (2013) Evaluation of a new approach for modelling the screw-bone interface in a locking plate fixation: A corroboration study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (7). 746 - 756. ISSN 0954-4119

Mok, J.M., Forsthoefel, C., Diaz, R.L. orcid.org/0000-0003-2595-1390 et al. (2 more authors) (2022) Biomechanical Comparison of Unilateral and Bilateral Pedicle Screw Fixation after Multilevel Lumbar Lateral Interbody Fusion. Global Spine Journal. ISSN 2192-5682

Mok, J.M. orcid.org/0000-0001-9781-0699, Lin, Y. orcid.org/0000-0001-8195-9042, Tafur, J.C. orcid.org/0000-0002-7492-4973 et al. (2 more authors) (2023) Biomechanical Comparison of Multilevel Stand-Alone Lumbar Lateral Interbody Fusion With Posterior Pedicle Screws: An In Vitro Study. Neurospine, 20 (2). pp. 478-486. ISSN 2586-6583

Monaghan, T, Capel, AJ, Christie, SD et al. (2 more authors) (2015) Solid-state additive manufacturing for metallized optical fiber integration. Composites Part A: Applied Science and Manufacturing, 76. pp. 181-193. ISSN 1359-835X

Monaghan, T, Harding, MJ, Harris, RA orcid.org/0000-0002-3425-7969 et al. (2 more authors) (2016) Customisable 3D printed microfluidics for integrated analysis and optimisation. Lab on a Chip, 16 (17). pp. 3362-3373. ISSN 1473-0197

Noble, C, Smulders, N, Lewis, R et al. (4 more authors) (2016) Controlled peel testing of a model tissue for diseased aorta. Journal of Biomechanics, 49 (15). pp. 3667-3675. ISSN 0021-9290

Noble, C, van der Sluis, O, Voncken, RMJ et al. (4 more authors) (2017) Simulation of arterial dissection by a penetrating external body using cohesive zone modelling. Journal of the Mechanical Behavior of Biomedical Materials, 71. pp. 95-105. ISSN 1751-6161

Nogiwa-Valdez, AA, Rainforth, WM and Stewart, TD (2014) Wear and degradation on retrieved zirconia femoral heads. Journal of the Mechanical Behavior of Biomedical Materials, 31. 145 - 151. ISSN 1751-6161

Norbertczak, HT orcid.org/0000-0002-4212-2888, Ingham, E orcid.org/0000-0002-9757-3045, Fermor, HL orcid.org/0000-0002-2493-3767 et al. (1 more author) (2020) Decellularised intervertebral discs: A potential replacement for degenerate human discs. Tissue Engineering Part C: Methods. ISSN 1937-3384

Norbertczak, HT orcid.org/0000-0002-4212-2888, Fermor, HL, Edwards, JH orcid.org/0000-0003-4152-6140 et al. (3 more authors) (2022) Decellularised human bone allograft from different anatomical sites as a basis for functionally stratified repair material for bone defects. Journal of the Mechanical Behavior of Biomedical Materials, 125. 104965. ISSN 1751-6161

O'Dwyer Lancaster-Jones, O, Williams, S orcid.org/0000-0002-6963-965X, Jennings, LM orcid.org/0000-0003-1446-4511 et al. (4 more authors) (2018) An in vitro simulation model to assess the severity of edge loading and wear, due to variations in component positioning in hip joint replacements. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 106 (5). pp. 1897-1906. ISSN 1552-4973

Paniagua Gutierrez, JR, Berry, H orcid.org/0000-0003-2426-1881, Korossis, S et al. (7 more authors) (2015) Regenerative Potential of Low-Concentration SDS-Decellularized Porcine Aortic Valved Conduits In Vivo. Tissue Engineering Part A, 21 (1-2). pp. 332-342. ISSN 1937-3341

Papageorgiou, I, Abberton, T, Fuller, M et al. (3 more authors) (2014) Biological Effects of Clinically Relevant CoCr Nanoparticles in the Dura Mater: An Organ Culture Study. Nanomaterials, 4 (2). 485 - 504. ISSN 2079-4991

Papageorgiou, I, Marsh, R, Tipper, JL et al. (3 more authors) (2014) Interaction of micron and nano-sized particles with cells of the dura mater. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 102 (7). 1496 - 1505. ISSN 1552-4973

Partridge, S orcid.org/0000-0003-3509-1662, Buckley, P, de Boer, G orcid.org/0000-0002-5647-1771 et al. (1 more author) (2018) A novel method to measure rim deformation in UHMWPE acetabular liners. Medical Engineering & Physics, 59. pp. 56-62. ISSN 1350-4533

Partridge, S orcid.org/0000-0003-3509-1662, Tipper, JL orcid.org/0000-0002-8719-0323, Al-Hajjar, M orcid.org/0000-0001-5008-6138 et al. (3 more authors) (2018) Evaluation of a new methodology to simulate damage and wear of polyethylene hip replacements subjected to edge loading in hip simulator testing. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 106 (4). pp. 1456-1462. ISSN 1552-4973

Paskins, Z., Farmer, C.E., Manning, F. et al. (24 more authors) (2022) Research priorities to reduce the impact of musculoskeletal disorders: a priority setting exercise with the child health and nutrition research initiative method. The Lancet Rheumatology, 4 (9). e635-e645. ISSN 2665-9913

Paterson, S. orcid.org/0000-0001-8974-5022, Vallatos, A., Rodgers, J. et al. (1 more author) (2023) Application of diffusion weighted multiple boli ASL to a murine model of human African trypanosomiasis. Scientific Reports, 13. 8684. ISSN 2045-2322

Paterson, S orcid.org/0000-0001-8974-5022, Holmes, WM and Rodgers, J (2022) Serial magnetic resonance imaging of splenomegaly in the Trypanosoma brucei infected mouse. PLOS Neglected Tropical Diseases, 16 (12). e0010962. ISSN 1935-2727

Pennington, N, Redmond, A, Stewart, T et al. (1 more author) (2014) The impact of surgeon handedness in total hip replacement. Annals of the Royal College of Surgeons of England, 96 (6). 437 - 441 (5). ISSN 0035-8843

Peters, AE, Geraghty, B, Bates, KT et al. (3 more authors) (2022) Ligament mechanics of ageing and osteoarthritic human knee. Frontiers in Bioengineering and Biotechnology, 10. 954837. ISSN 2296-4185

Pryce, GM orcid.org/0000-0002-0857-4688, Sabu, B, Al-Hajjar, M et al. (5 more authors) (2022) Impingement in total hip arthroplasty: A geometric model. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 236 (4). pp. 504-514. ISSN 0954-4119

Rajpura, A, Board, TN, Siney, PD et al. (4 more authors) (2017) A 28-year clinical and radiological follow-up of alumina ceramic-on-crosslinked polyethylene total hip arthroplasty: a follow-up report and analysis of the oxidation of a shelf-aged acetabular component. Bone and Joint Journal, 99-B (10). pp. 1286-1289. ISSN 2049-4394

Raju, V. orcid.org/0000-0002-0746-4516 and Koorata, P.K. orcid.org/0000-0001-9141-8741 (2023) Computational assessment on the impact of collagen fiber orientation in cartilages on healthy and arthritic knee kinetics/kinematics. Medical Engineering & Physics, 117. 103997. ISSN 1350-4533

Raju, V. orcid.org/0000-0002-0746-4516 and Koorata, P.K. (2022) Computational evaluation of the effect of femoral component curvature on the mechanical response of the UHMWPE tibial insert in total knee replacement implants. Materials Today: Proceedings. ISSN 2214-7853

Raju, V. orcid.org/0000-0002-0746-4516 and Koorata, P.K. orcid.org/0000-0001-9141-8741 (2022) Influence of material heterogeneity on the mechanical response of articulated cartilages in a knee joint. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 236 (9). pp. 1340-1348. ISSN 0954-4119

Raju, V. orcid.org/0000-0002-0746-4516, Koorata, P.K. and Kamat, Y. (2021) Case study for contact pressure improvisation with graded implant material in articular cartilages of knee joint. Journal of Mechanical Science and Technology, 35 (3). pp. 1049-1054. ISSN 1738-494X

Ravikumar, N, Gooya, A, Çimen, S et al. (2 more authors) (2018) Group-wise similarity registration of point sets using Student’s t-mixture model for statistical shape models. Medical Image Analysis, 44. pp. 156-176. ISSN 1361-8415

Ravikumar, N, Noble, C, Cramphorn, E et al. (1 more author) (2015) A constitutive model for ballistic gelatin at surgical strain rates. Journal of the Mechanical Behavior of Biomedical Materials, 47. pp. 87-94. ISSN 1751-6161

Rayment, T.E. orcid.org/0009-0002-2989-8208, Williams, S. and Jones, A.C. orcid.org/0000-0002-4984-7507 (2024) A new height contouring method for severity prediction in cam-type hip joints: 20 subject-specific cases. Biomedical Engineering Advances, 7. 100119. ISSN 2667-0992

Readioff, R orcid.org/0000-0003-4887-9635, Geraghty, B, Comerford, E et al. (1 more author) (2020) A full-field 3D digital image correlation and modelling technique to characterise anterior cruciate ligament mechanics ex vivo. Acta Biomaterialia, 113. pp. 417-428. ISSN 1742-7061

Readioff, R orcid.org/0000-0003-4887-9635, Geraghty, B, Elsheikh, A et al. (1 more author) (2020) Viscoelastic characteristics of the canine cranial cruciate ligament complex at slow strain rates. PeerJ, 8. e10635. ISSN 2167-8359

Readioff, R orcid.org/0000-0003-4887-9635, Kamran Siddiqui, Z, Stewart, C et al. (3 more authors) (2022) Use and evaluation of assistive technologies for upper limb function in tetraplegia. Journal of Spinal Cord Medicine, 45 (6). pp. 809-820. ISSN 1079-0268

Riches, K, Angelini, TG, Mudhar, GS et al. (8 more authors) (2013) Exploring smooth muscle phenotype and function in a bioreactor model of abdominal aortic aneurysm. Journal of Translational Medicine, 11 (1). 208. ISSN 1479-5876

Rivera-Gonzalez, GC, Droop, AP, Rippon, HJ et al. (4 more authors) (2012) Retinoic acid and androgen receptors combine to achieve tissue specific control of human prostatic transglutaminase expression: a novel regulatory network with broader significance. Nucleic Acids Research, 40 (11). pp. 4825-4840. ISSN 0305-1048

Robson Brown, K, Tarsuslugil, S, Wijayathunga, VN et al. (1 more author) (2014) Comparative finite-element analysis: a single computational modelling method can estimate the mechanical properties of porcine and human vertebrae. Journal of the Royal Society Interface, 11 (95). 20140186. ISSN 1742-5689

Rochelle, D, Herbert, A orcid.org/0000-0002-6527-2205, Ktistakis, I et al. (3 more authors) (2020) Mechanical characterisation of the lateral collateral ligament complex of the ankle at realistic sprain-like strain rates. Journal of the Mechanical Behavior of Biomedical Materials, 102. 013473. ISSN 1751-6161

Sayin, E, Rashid, RH, Rodríguez-Cabello, JC et al. (3 more authors) (2017) Human adipose derived stem cells are superior to human osteoblasts (HOB) in bone tissue engineering on a collagen-fibroin-ELR blend. Bioactive Materials, 2 (2). pp. 71-81. ISSN 2452-199X

Sharp, A.C. orcid.org/0000-0001-5117-5335, Dutel, H., Watson, P.J. et al. (4 more authors) (2023) Assessment of the mechanical role of cranial sutures in the mammalian skull: Computational biomechanical modelling of the rat skull. Journal of Morphology, 284 (3). e21555. ISSN 0362-2525

Shaw, R.H., Liu, X., Stuart, A.S.V. et al. (81 more authors) (2022) Effect of priming interval on reactogenicity, peak immunological response, and waning after homologous and heterologous COVID-19 vaccine schedules: exploratory analyses of Com-COV, a randomised control trial. The Lancet Respiratory Medicine, 10 (11). pp. 1049-1060. ISSN 2213-2600

Sikora, SNF, Miles, DE, Tarsuslugil, S et al. (2 more authors) (2018) Examination of an in-vitro methodology to evaluate the biomechanical performance of nucleus augmentation in axial compression. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (3). pp. 230-240. ISSN 0954-4119

Smeeton, M, Isaac, G, Wilcox, R et al. (4 more authors) (2023) A geometric assessment method for estimating dimensional change of retrieved dual mobility liners for total hip arthroplasty. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 237 (6). pp. 782-787. ISSN 0954-4119

Smyth, A, Fisher, J orcid.org/0000-0003-3833-3700, Suner, S et al. (1 more author) (2017) Influence of Kinematics on the Wear of a Total Ankle Replacement. Journal of Biomechanics, 53. pp. 105-110. ISSN 0021-9290

Solis-Cordova, J, Edwards, JH orcid.org/0000-0003-4152-6140, Fermor, HL orcid.org/0000-0002-2493-3767 et al. (3 more authors) (2023) Characterisation of Native and Decellularised Porcine Tendon Under Tension and Compression: A Closer Look at Glycosaminoglycan Contribution to Tendon Mechanics. Journal of The Mechanical Behavior of Biomedical Materials, 139. 105671. ISSN 1751-6161

Song, Y, Treanor, D, Bulpitt, AJ et al. (4 more authors) (2014) Unsupervised content classification based non-rigid registration of differently stained histology images. IEEE Transactions on Biomedical Engineering, 61 (1). ISSN 0018-9294

Statham, P, Jones, E orcid.org/0000-0001-9365-2283, Jennings, LM orcid.org/0000-0003-1446-4511 et al. (1 more author) (2022) Reproducing the biomechanical environment of the chondrocyte for cartilage tissue engineering. Tissue Engineering Part B: Reviews, 28 (2). pp. 405-420. ISSN 1937-3368

Stewart, TD, Whitwell, G and Pai, SK (2013) Long-term results of a total knee prosthesis utilising an all polyethylene tibial component. Archives of Orthopaedic and Trauma Surgery, 133 (8). 1143 - 1148. ISSN 0936-8051

Stratton-Powell, AA, Pasko, KM, Brockett, CL orcid.org/0000-0002-6664-7259 et al. (1 more author) (2016) The Biologic Response to Polyetheretherketone (PEEK) Wear Particles in Total Joint Replacement: A Systematic Review. Clinical Orthopaedics and Related Research, 474 (11). pp. 2394-2404. ISSN 0009-921X

Stratton-Powell, AA, Williams, S orcid.org/0000-0002-6963-965X, Tipper, JL et al. (2 more authors) (2023) Isolation and characterisation of wear debris surrounding failed total ankle replacements. Acta Biomaterialia, 159. pp. 410-422. ISSN 1742-7061

Stratton-Powell, AA, Williams, S orcid.org/0000-0002-6963-965X, Tipper, JL et al. (2 more authors) (2022) Mixed material wear particle isolation from periprosthetic tissue surrounding total joint replacements. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 110 (10). pp. 2276-2289. ISSN 1552-4973

Sun, C, Wang, L, Wang, Z et al. (4 more authors) (2015) Finite Element Analysis of A Retrieved Custom-Made Knee Prosthesis. Journal of Mechanics in Medicine and Biology, 15 (3). 1550020. pp. 1550020-1550034. ISSN 0219-5194

Ta, DV, Dunn, A, Wasley, TJ et al. (5 more authors) (2015) Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications. Applied Surface Science, 357. pp. 248-254. ISSN 0169-4332

Ta, VD, Dunn, A, Wasley, TJ et al. (7 more authors) (2016) Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition. Applied Surface Science, 365. pp. 153-159. ISSN 0169-4332

Ta, VD, Dunn, A, Wasley, TJ et al. (7 more authors) (2016) Laser textured surface gradients. Applied Surface Science, 371. pp. 583-589. ISSN 0169-4332

Talbott, HG orcid.org/0000-0001-7439-8048, Wilkins, RA orcid.org/0000-0003-1885-5472, Redmond, AC orcid.org/0000-0002-8709-9992 et al. (2 more authors) (2021) Morphological variation of the hemophilic talus. Clinical Anatomy, 34 (6). pp. 941-947. ISSN 0897-3806

Talbott, HG orcid.org/0000-0001-7439-8048, Wilkins, RA orcid.org/0000-0003-1885-5472, Redmond, AC et al. (2 more authors) (2022) The relationship between subchondral bone cysts and cartilage health in the Tibiotalar joint: A finite element analysis. Clinical Biomechanics, 99. 105745. ISSN 0268-0033

Tarsuslugil, SM, O'Hara, RM, Dunne, NJ et al. (4 more authors) (2014) Experimental and computational approach investigating burst fracture augmentation using PMMA and calcium phosphate cements. Annals of Biomedical Engineering, 42 (4). 751 - 762. ISSN 0090-6964

Taverne, M. orcid.org/0000-0003-3355-6200, Watson, P.J. orcid.org/0000-0003-0220-2960, Dutel, H. orcid.org/0000-0002-1908-5150 et al. (6 more authors) (2023) Form–function relationships underlie rapid dietary changes in a lizard. Proceedings of the Royal Society B: Biological Sciences, 290 (2000). 20230582. ISSN 0962-8452

Theodorides, AA, Stewart, TD orcid.org/0000-0002-6868-9938 and Venkatesh, R (2019) Can the radiopaque marker in surgical swabs scratch orthopaedic implant surfaces? European Journal of Orthopaedic Surgery and Traumatology, 29 (2). pp. 383-388. ISSN 1633-8065

Vafaee, T, Thomas, D orcid.org/0000-0001-5584-9114, Desai, A orcid.org/0000-0001-8611-9958 et al. (6 more authors) (2018) Decellularization of human donor aortic and pulmonary valved conduits using low concentration sodium dodecyl sulfate. Journal of Tissue Engineering and Regenerative Medicine, 12 (2). e841-e853. ISSN 1932-6254

Vafaee, T, Walker, F, Thomas, D orcid.org/0000-0001-5584-9114 et al. (9 more authors) (2022) Repopulation of decellularised porcine pulmonary valves in the right ventricular outflow tract of sheep: role of macrophages. Journal of Tissue Engineering, 13. ISSN 2041-7314

Vardakis, JC, Guo, L, Peach, TW et al. (8 more authors) (2019) Fluid–structure interaction for highly complex, statistically defined, biological media: Homogenisation and a 3D multi-compartmental poroelastic model for brain biomechanics. Journal of Fluids and Structures, 91. 102641. ISSN 0889-9746

Vardakis, JC, Bonfanti, M, Franzetti, G et al. (14 more authors) (2019) Highly integrated workflows for exploring cardiovascular conditions: Exemplars of precision medicine in Alzheimer's disease and aortic dissection. Morphologie, 103 (343). pp. 148-160. ISSN 1286-0115

Vardaxoglou, JC, Tribe, J, Whittow, WG et al. (1 more author) (2014) Additively manufactured heterogeneous substrates for three-dimensional control of local permittivity. Electronics Letters, 50 (10). pp. 745-746. ISSN 0013-5194

Vasiljeva, K, Lunn, D., Chapman, G. et al. (6 more authors) (2024) Dynamic Acetabular Cup Orientation during Gait: A Study of Fast- and Slow-Walking Total Hip Replacement Patients. Bioengineering, 11 (2). 151. ISSN 2306-5354

Vasiljeva, K, van Duren, BH orcid.org/0000-0003-1877-8227 and Pandit, H orcid.org/0000-0001-7392-8561 (2020) Changing device regulations in the European Union – impact on research, innovation and clinical practice. Indian Journal of Orthopaedics, 54 (2). pp. 123-129. ISSN 0019-5413

Wang, L, Isaac, G, Wilcox, R orcid.org/0000-0003-2736-7104 et al. (2 more authors) (2019) Finite element analysis of polyethylene wear in total hip replacement: A literature review. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 233 (11). pp. 1067-1088. ISSN 0954-4119

Wang, L. orcid.org/0000-0003-2661-9533, Meloro, C., Fagan, M.J. et al. (4 more authors) (2024) Regional variation of the cortical and trabecular bone material properties in the rabbit skull. PLoS ONE, 19 (2). e0298621. ISSN 1932-6203

Warren, JP orcid.org/0000-0002-0039-5730, Culbert, MP orcid.org/0000-0002-4147-8292, Miles, DE et al. (3 more authors) (2023) Controlling the Self-Assembly and Material Properties of β-Sheet Peptide Hydrogels by Modulating Intermolecular Interactions. Gels, 9 (6). 441. ISSN 2310-2861

Warren, JP orcid.org/0000-0002-0039-5730, Miles, DE, Kapur, N orcid.org/0000-0003-1041-8390 et al. (2 more authors) (2021) Hydrodynamic Mixing Tunes the Stiffness of Proteoglycan‐Mimicking Physical Hydrogels. Advanced Healthcare Materials, 10 (11). 2001998. ISSN 2192-2640

Watson, P.J., Fitton, L.C., Meloro, C. orcid.org/0000-0003-0175-1706 et al. (2 more authors) (2018) Mechanical adaptation of trabecular bone morphology in the mammalian mandible. Scientific Reports, 8. 7277. ISSN 2045-2322

Watson, P.J., Sharp, A.C., Choudhary, T. et al. (4 more authors) (2021) Computational biomechanical modelling of the rabbit cranium during mastication. Scientific Reports, 11. 13196. ISSN 2045-2322

Westerman, AP, Moor, AR, Stone, MH et al. (1 more author) (2018) Hip stem fatigue: : The implications of increasing patient mass. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (5). pp. 520-530. ISSN 0954-4119

Whitaker, S, Edwards, JH orcid.org/0000-0003-4152-6140, Guy, S et al. (2 more authors) (2019) Stratifying the mechanical performance of a decellularized xenogeneic tendon graft for anterior cruciate ligament reconstruction as a function of graft diameter. Bone and Joint Research, 8 (11). pp. 518-525. ISSN 2046-3758

Wijayathunga, VN, Oakland, RJ, Jones, AC et al. (2 more authors) (2013) Vertebroplasty: patient and treatment variations studied through parametric computational models. Clinical Biomechanics, 28 (8). 860 - 865. ISSN 0268-0033

Wijayathunga, VN, Ridgway, JP, Ingham, E et al. (6 more authors) (2015) A non-destructive method to distinguish the internal constituent architecture of the intervertebral discs using 9.4 Tesla Magnetic Resonance Imaging. Spine, 40 (24). E1315-E1322. ISSN 0362-2436

Wijayathunga, VN, Tanner, SF, Ridgway, JP et al. (1 more author) (2019) An In Vitro Study of the Intervertebral Disc Structure Using 3 T Magnetic Resonance Imaging. Spine, 44 (11). pp. 793-800. ISSN 0362-2436

Wu, X, Lian, Q, Li, D et al. (1 more author) (2017) Tilting separation analysis of bottom-up mask projection stereolithography based on cohesive zone model. Journal of Materials Processing Technology, 243. pp. 184-196. ISSN 0924-0136

Yang, S. orcid.org/0000-0003-0531-2903, Lemke, C. orcid.org/0000-0003-4003-4814, Cox, B.F. et al. (3 more authors) (2020) A Learning-Based Microultrasound System for the Detection of Inflammation of the Gastrointestinal Tract. IEEE Transactions on Medical Imaging, 40 (1). pp. 38-47. ISSN 0278-0062

Yao, J., Crockett, J., D'Souza, M. et al. (4 more authors) (2024) Effect of meniscus modelling assumptions in a static tibiofemoral finite element model: importance of geometry over material. Biomechanics and Modeling in Mechanobiology. ISSN 1617-7959

Zakeri, A orcid.org/0000-0002-6011-2333, Hokmabadi, A orcid.org/0000-0002-1407-4540, Bi, N orcid.org/0000-0002-7505-3997 et al. (6 more authors) (2023) DragNet: Learning-based deformable registration for realistic cardiac MR sequence generation from a single frame. Medical Image Analysis, 83. 102678. ISSN 1361-8415

Zapata-Cornelio, FY orcid.org/0000-0002-4344-8572, Day, GA, Coe, RH et al. (5 more authors) (2017) Methodology to Produce Specimen-Specific Models of Vertebrae: Application to Different Species. Annals of Biomedical Engineering, 45 (10). pp. 2451-2460. ISSN 0090-6964

Zapata-Cornelio, FY orcid.org/0000-0002-4344-8572, Jin, Z, Barton, DC orcid.org/0000-0003-4986-5817 et al. (2 more authors) (2018) A methodology for the generation and non-destructive characterisation of transverse fractures in long bones. Bone Reports, 8. pp. 221-228.

Zeng, P, Rainforth, WM and Stewart, TD (2017) Characterisation of the wear mechanisms in retrieved alumina-on-alumina total hip replacements. Wear, 376–37 (Part A). pp. 212-222. ISSN 0043-1648

Zhang, J, Chen, Z, Wang, L et al. (2 more authors) (2017) A Patient-specific Wear Prediction Framework for an Artificial Knee Joint with Coupled Musculoskeletal Multibody-dynamics and Finite Element Analysis. Tribology International, 109. pp. 382-389. ISSN 0301-679X

Zhang, X, Chen, Z, Wang, L et al. (3 more authors) (2015) Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (7). 477 - 490. ISSN 0954-4119

Zhang, Z, Wang, B, Huang, S et al. (7 more authors) (2016) A novel approach to fabricating a nanotwinned surface on a ternary nickel alloy. Materials and Design, 106. pp. 313-320. ISSN 0261-3069

Zhang, G., Yang, S. orcid.org/0000-0003-0531-2903, Cui, W. et al. (5 more authors) (2022) Decomposition of micromotion at the head-neck interface in total hip arthroplasty during walking. Computer Methods in Biomechanics and Biomedical Engineering, 26 (5). pp. 548-558. ISSN 1025-5842

Zhao, Y., Luo, H., Chen, J. et al. (3 more authors) (2023) Learning based motion artifacts processing in fNIRS: a mini review. Frontiers in Neuroscience, 17. 1280590. ISSN 1662-4548

Zhou, X., Xia, Y., Uchitel, J. et al. (5 more authors) (2023) Review of recent advances in frequency-domain near-infrared spectroscopy technologies [Invited]. Biomedical Optics Express, 14 (7). pp. 3234-3258. ISSN 2156-7085

de Ruiter, L, Cowie, RM orcid.org/0000-0003-3903-5916, Jennings, LM orcid.org/0000-0003-1446-4511 et al. (3 more authors) (2020) The Effects of Cyclic Loading and Motion on the Implant–Cement Interface and Cement Mantle of PEEK and Cobalt–Chromium Femoral Total Knee Arthroplasty Implants: A Preliminary Study. Materials, 13 (15). 3323. p. 3323. ISSN 1996-1944

Book Section

Abouhossein, A, Awad, MI orcid.org/0000-0002-0367-0187, Crisp, C et al. (6 more authors) (2017) Gait Abnormalities of Above Knee Amputees During Late Swing Phase, Is It a Design Deficiency or Compensatory Strategy? In: Ibáñez, J, González-Vargas, J, Azorín, JM, Akay, M and Pons, JL, (eds.) Converging Clinical and Engineering Research on Neurorehabilitation II: Proceedings of the 3rd International Conference on NeuroRehabilitation (ICNR2016), October 18-21, 2016, Segovia, Spain. Biosystems & Biorobotics (15). Springer International Publishing , Cham, Switzerland , pp. 279-283. ISBN 978-3-319-46668-2

Ali, M, Al-Hajjar, M orcid.org/0000-0001-5008-6138 and Jennings, LM orcid.org/0000-0003-1446-4511 (2015) Tribology of UHMWPE in the Hip. In: UHMWPE Biomaterials Handbook. Elsevier , pp. 579-595. ISBN 9780323354011

Mengoni, M orcid.org/0000-0003-0986-2769, Sikora, SN, d'Otreppe, V et al. (2 more authors) (2015) In-Silico Models of Trabecular Bone: A Sensitivity Analysis Perspective. In: Geris, L and Gomez-Cabrero, D, (eds.) Uncertainty in Biology: A Computational Modeling Approach. Studies in Mechanobiology, Tissue Engineering and Biomaterials, 17 . Springer , pp. 393-423. ISBN 978-3-319-21295-1

Yang, S. orcid.org/0000-0003-0531-2903 and Li, Y. (2022) A Fast Inference Framework for Medical Image Semantic Segmentation Tasks Using Deep Learning Framework. In: Computational Intelligence and Image Processing in Medical Applications. World Scientific , pp. 157-174. ISBN 978-981-12-5744-5

Conference or Workshop Item

Abouhossein, A orcid.org/0000-0001-8697-1593, Awad, MI orcid.org/0000-0002-0367-0187, Crisp, C et al. (6 more authors) (2016) Effect of Different Prosthetic Knees/feet on the Roll-Over Shape. In: 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 17-20 Aug 2016, Orlando, Florida, USA.

Anyamele, U, Nerwich, E, Godfrey, J et al. (4 more authors) (2020) Developing Low-Cost Techniques to Improve the use of Ilizarov Circular Frame Fixators for Tibial Fractures in Low and Middle-Income Countries. In: Association of Surgeons in Training International Surgical Conference.

Aslam, S, Desai, A, Rooney, P et al. (3 more authors) (2022) THE IMPACT OF SUPERCRITICAL CARBON DIOXIDE ON THE BIOLOGICAL AND BIOMECHANICAL PROPERTIES OF DECELLULARISED HEART VALVES. In: TERMIS 2021, 15-19 Nov 2021, Online.

Cattaneo, D. orcid.org/0000-0003-1453-3257, Maggioli, A., Magnani, G. orcid.org/0000-0001-9729-5826 et al. (4 more authors) (2023) Mixed Precision in Heterogeneous Parallel Computing Platforms via Delayed Code Analysis. In: 23rd International Conference, SAMOS 2023, 2023-07-02 - 06-07-2023, Samos, Greece.

Liu, A, Ingham, E orcid.org/0000-0002-9757-3045, Fisher, J et al. (1 more author) (2019) Development of a porcine knee model for pre-clinical tribological assessment of early-stage knee therapies. In: The British Orthopaedic Research Society (BORS) Annual Meeting, 10-11 Sep 2018, Leeds, UK.

Liu, X. orcid.org/0009-0000-7674-3183, Ma, L. orcid.org/0009-0006-8776-9112, Chen, Z. orcid.org/0009-0002-2151-7028 et al. (4 more authors) (2023) A Novel State Space Exploration Method for the Sparse-Reward Reinforcement Learning Environment. In: 43rd SGAI International Conference on Artificial Intelligence, AI 2023, 12-14 Dec 2023, Cambridge, UK.

Mengoni, M orcid.org/0000-0003-0986-2769, Brockett, CL, Zapata, FY et al. (3 more authors) (2014) On presenting aspects of computational biomechanics to the non-specialists. In: MEC Annual Meeting and Bioengineering 14, 10-11 Sep 2014, London.

Mengoni, M, Luxmoore, BJ, Wijayathunga, VN et al. (2 more authors) (2014) On the effect of the inter-lamellar behaviour in a finite element model of the annulus fibrosus. In: 12th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, 13-15 Oct 2014, Amsterdam, The Netherlands.

Mengoni, M, Wijayathunga, VN, Jones, AC et al. (1 more author) (2014) On the inter-lamellar behaviour effect in a finite element model of the annulus fibrosus. In: Young Researchers Futures Meeting -Engineering for orthopaedic applications, 15-17 Sep 2014, Leeds, United Kingdom. (Unpublished)

Readioff, R orcid.org/0000-0003-4887-9635, Blana, D, Mulla, D et al. (3 more authors) (2020) The effect of simplifying scaling methods of an upper limb musculoskeletal model on the joint angles. In: ESMAC 2020, 17 Sep 2020, Online.

Solis-Cordova, J, Edwards, JH, Fermor, H et al. (2 more authors) (2022) MODIFICATION OF DECELLULARISATION METHODS TO ASSESS THE EFFECTS OF SWELLING ON THE MECHANICAL PROPERTIES OF PORCINE TENDON. In: TERMIS2021, 15-19 Nov 2021, Online.

Talbott, H, Wilkins, R, Redmond, A orcid.org/0000-0002-8709-9992 et al. (2 more authors) (2020) The influence of subchondral bone cysts on tissue pressures in the tibiotalar joint. In: 13th Annual Congress of European Association for Haemophilia and Allied Disorders 2020.

Proceedings Paper

Alazmani, A orcid.org/0000-0001-8983-173X, Keeling, DG, Walker, PG et al. (4 more authors) (2012) Introducing a Hardware-in-the-Loop Simulation of the Cardiovascular System. In: 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob). 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), 24-27 Jun 2012, Rome, Italy. IEEE , pp. 153-158. ISBN 978-1-4577-1199-2

Aslam, S., Desai, A., Edwards, J.H. orcid.org/0000-0003-4152-6140 et al. (2 more authors) (2023) Supercritical Carbon Dioxide Sterilised Decellularised Porcine Pulmonary Heart Valves: Biological and Biomechanical Characterisation. In: Tissue Engineering Part A. TERMIS 2023 – European Chapter, 28-31 Mar 2023, Manchester, UK. Mary Ann Liebert , PP-054-PP-054.

Aslam, S., Desai, A., Edwards, J.H. orcid.org/0000-0003-4152-6140 et al. (2 more authors) (2023) Supercritical Carbon Dioxide Sterilised Decellularised Porcine Pulmonary Heart Valves: Biological and Biomechanical Characterisation. In: Tissue Engineering Part A. TERMIS 2023 – European Chapter Manchester, 28-31 Mar 2023, Manchesterm, UK. Mary Ann Liebert, Inc. .

Bournias-Varotsis, A, Harris, RA orcid.org/0000-0002-3425-7969 and Friel, RJ (2015) The Effect of Ultrasonic Excitation on the Electrical Properties and Microstructure of Printed Electronic Conductive Inks. In: Proceedings. 2015 38th International Spring Seminar on Electronics Technology (ISSE), 06-10 May 2015, Eger, Hungary. IEEE , pp. 140-145. ISBN 978-1-4799-8860-0

Carey, D, Wijayathunga, VN, Bulpitt, AJ et al. (1 more author) (2015) A Novel Approach for the Colour Deconvolution of Multiple Histological Stains. In: Lambrou, T and Ye, X, (eds.) Proceedings of the 19th Conference of Medical Image Understanding and Analysis. Medical Image Understanding and Analysis, 15-17 Jul 2015, Lincoln, UK. BMVA , 156 - 162. ISBN 1-901725-54-5

Casper-Taylor, ME, Wilcox, R and Mengoni, M orcid.org/0000-0003-0986-2769 (2019) Stiffness of subchondral bone of grafts and defect site in osteochondral repair influences stability of repair. In: Osteoarthritis and Cartilage. 2019 OARSI World Congress on Osteoarthritis: Promoting Clinical and Basic Research in Osteoarthritis, 02-05 May 2019, Toronto, Ontario, Canada. Elsevier , S160-S160.

Falconer, SE, Taylor, ZA orcid.org/0000-0002-0718-1663 and Tomlinson, RA (2019) Developing a soft tissue surrogate for use in photoelastic testing. In: Vergani, L and Guagliano, M, (eds.) Materials Today: Proceedings. 1st International Conference on Materials, Mimicking, Manufacturing from and for Bio Application (BioM&M), 27-29 Jun 2018, Milano, Italy. Elsevier , pp. 537-544.

Fox, N, Stanley, M, Thomas, D orcid.org/0000-0001-5584-9114 et al. (2 more authors) (2016) Development of an Ex-Vivo Organ Culture Model of the Femoral-Tibial Joint. In: Orthopaedic Research Society 2015 Annual Meeting. Orthopaedic Research Society 2015 Annual Meeting, 28-31 Mar 2015, Las Vegas, Nevada. . (Unpublished)

Groves, D orcid.org/0000-0002-4834-8503, Fisher, J orcid.org/0000-0003-3833-3700 and Williams, S orcid.org/0000-0002-6963-965X (2018) In-Vitro Simulation of Natural Hip and Hip Hemiarthroplasty Joints. In: Orthopaedic Proceedings. International Society for Technology in Arthroplasty (ISTA) Annual Congress, 05-08 Oct 2016, Boston, Massachusetts, US. The British Editorial Society of Bone & Joint Surgery .

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2016) Artificial Vascular Bifurcations – Design and Modelling. In: Bártolo, P, (ed.) Procedia CIRP. The Second CIRP Conference on Biomanufacturing, 29-31 Jul 2015, Manchester Conference Centre, UK. Elsevier , pp. 14-18.

Luo, J, Ingham, E, Fisher, J et al. (2 more authors) (2014) The development of an acellular porcine carotid artery. In: Journal of Tissue Engineering and Regenerative Medicine. Tissue Engineering & Regenerative Medicine International Society, European Chapter Meeting, 10–13 June, 2014, Genova, Italy. Wiley , 335 - 336.

Mengoni, M, Jones, AC, Wijayathunga, VN et al. (1 more author) (2015) Modelling the failure mechanism of the annulus fibrosus. In: European Spine Journal. EUROSPINE 2015, 02-04 Sep 2015, Copenhagen, Denmark. Springer Berlin Heidelberg , p. 711.

Mengoni, M, Luxmoore, BJ, Jones, AC et al. (3 more authors) (2014) A cohesive interface approach to model the inter-lamellar behaviour of the intervertebral disc annulus fibrosus. In: Proceedings of 7th World Congress of Biomechanics and the 20th Congress of The European Society of Biomechanics. The World Congress of Biomechanics , 06-11 Jul 2014, Boston, USA. . (Unpublished)

Mengoni, M, Wijayathunga, VN, Jones, AC et al. (1 more author) (2013) Structural modelling of the annulus fibrosus - an anisotropic hyperelastic model approach at the lamellar level. In: Nithiarasu, P and Löhner, R, (eds.) 3rd International Conference on Mathematical and Computational Biomedical Engineering. 3rd International Conference on Computational & Mathematical Biomedical Engineering, 16-18 Dec 2013, City University of Hong-Kong, Tat Chee Avenue. . ISBN 978-0-9562914-2-4

Preutenborbeck, M, Holub, O, Freeman, E et al. (3 more authors) (2016) Assessment of the fracture risk of proximal porcine femurs with simulated lesions using a fracture prediction method based on beam theory. In: Journal of Orthopaedic Translation. 2016 International Combined Meeting of Orthopaedic Research Societies, 21-25 Sep 2016, Xian, China. Elsevier , pp. 83-84.

Ravikumar, N, Gooya, A, Frangi, AF orcid.org/0000-0002-2675-528X et al. (1 more author) (2017) Generalised coherent point drift for group-wise registration of multi-dimensional point sets. In: Lecture Notes in Computer Science. Medical Image Computing and Computer Assisted Intervention - MICCAI 2017. 20th International Conference, 10-14 Sep 2017, Quebec, Canada. Springer , pp. 309-316. ISBN 9783319661810

Raxworthy, MJ orcid.org/0000-0002-6206-6748 (2018) Introducing and embedding innovation practices in a UK medical engineering degree course. In: 2018 3rd Biennial South African Biomedical Engineering Conference (SAIBMEC). 3rd South African Biomedical Engineering Conference, 04-06 Apr 2018, Stellenbosch, South Africa. IEEE , pp. 1-4. ISBN 9781538625163

Raxworthy, MJ orcid.org/0000-0002-6206-6748, Serino, LP and Iddon, PD (2018) Electrospun bioresorbable tissue repair scaffolds: From laboratory to clinic. In: 2018 3rd Biennial South African Biomedical Engineering Conference, SAIBMEC 2018. 3rd South African Biomedical Engineering Conference, 04-06 Apr 2018, Stellenbosch, South Africa. IEEE . ISBN 9781538625163

Saeed, SU, Taylor, ZA orcid.org/0000-0002-0718-1663, Pinnock, MA et al. (3 more authors) (2020) Prostate Motion Modelling Using Biomechanically-Trained Deep Neural Networks on Unstructured Nodes. In: Lecture Notes in Computer Science. MICCAI 2020: Medical Image Computing and Computer Assisted Intervention – MICCAI 2020, 04-08 Oct 2020, Lima, Peru. Springer Verlag , pp. 650-659. ISBN 9783030597184

Saini, D., Alkureishi, L., Reid, R. et al. (4 more authors) (2022) QS75. Bone Bending: Developing an Animal Model For Mechanical Properties of Human Infant Calvarium. In: Plastic and Reconstructive Surgery - Global Open. PSRC 2022 Annual Meeting, 08-12 Jun 2022, Toronto, Canada. Wolters Kluwer Health , p. 136.

Wasley, T, Li, J, Kay, R et al. (6 more authors) (2016) Enabling Rapid Production and Mass Customisation of Electronics Using Digitally Driven Hybrid Additive Manufacturing Techniques. In: Proceedings. 66th Electronic Components and Technology Conference (ECTC 2016), 31 May - 03 Jun 2016, Las Vegas, NV, USA. IEEE , pp. 849-856. ISBN 978-1-5090-1204-6

Wasley, T, Li, J, Ta, D et al. (6 more authors) (2016) Additive Manufacturing of High Resolution Embedded Electronic Systems. In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication 2016 (SFF Symp 2016), 08-10 Aug 2016, Austin, Texas, USA. University of Texas at Austin , pp. 1838-1855.

Zapata Cornelio, FY orcid.org/0000-0002-4344-8572, Jones, AC orcid.org/0000-0002-4984-7507, Barton, DC orcid.org/0000-0003-4986-5817 et al. (2 more authors) (2013) Characterisation of roughness and shape of long bone fractures. In: ESB 2013. 19th Congress of the European Society of Biomechanics, 25-28 Aug 2013, Patras, Greece. .

Zapata Cornelio, FY orcid.org/0000-0002-4344-8572, Jones, AC orcid.org/0000-0002-4984-7507, Jin, Z et al. (2 more authors) (2014) Torsional Resistance of Fractured Femurs as a Function of Axial Compression Loading. In: 7th World Congress of Biomechanics. 7th World Congress of Biomechanics, 06-11 Jul 2014, Boston, Massachusetts, USA. .

Zhao, Y. orcid.org/0009-0002-7423-1007, Xia, Y. orcid.org/0009-0000-2768-6418, Loureiro, R. orcid.org/0000-0002-9335-3811 et al. (3 more authors) (2023) Edge Acceleration for Machine Learning-based Motion Artifact Detection on fNIRS Dataset. In: IWOCL '23: Proceedings of the 2023 International Workshop on OpenCL. IWOCL '23: International Workshop on OpenCL, 18-20 Apr 2023, Cambridge, UK. ACM . ISBN 979-8-4007-0745-2

Patent

GB 2507850 A (2013) Bone Meniscus Bone Title of the Invention: Composite Bone Implants Abstract Title: A decelluralised implant material. .

Preprint

Zheng, C., Yang, S. orcid.org/0000-0003-0531-2903, Parra-Ullauri, J. et al. (2 more authors) (2021) Reward-Reinforced Reinforcement Learning for Multi-agent Systems. [Preprint]

Other

Mengoni, M (2015) 2DImage2Mesh, a Python code to generate quadrangular meshes on images. UNSPECIFIED.

Mengoni, M (2015) opti4Abq, a generic Python code to run Abaqus in an optimisation loop. UNSPECIFIED.