Browse by Academic Unit (A-Z)
- White Rose Consortium (141820)
- The University of Leeds (61124)
- Faculty of Engineering & Physical Sciences (Leeds) (18902)
- School of Mechanical Engineering (Leeds) (2241)
- Faculty of Engineering & Physical Sciences (Leeds) (18902)
- The University of Leeds (61124)
A
AL-Khafaji, M., Yang, J. orcid.org/0000-0003-4401-8061, Tomlin, A.S. et al. (4 more authors) (2023) Laminar burning velocities and Markstein numbers for pure hydrogen and methane/hydrogen/air mixtures at elevated pressures. Fuel, 354. 129331. ISSN 0016-2361
Abbas, A.K., Abed, K.W., Abd, O.I. et al. (2 more authors) (2021) High performance of solar panel based on new cooling and cleaning technique. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). pp. 803-814. ISSN 2502-4752
Abbott, SJ, Kapur, N, Sleigh, PA et al. (2 more authors) (2011) A review of deformable roll coating systems. Convertech & e-Print, 1 (3). 89 - 93 (5). ISSN 2185-6931
Abbott, SJ, Kapur, N, Sleigh, PA et al. (2 more authors) (2011) A review of the fluid mechanics of rigid roll coating systems. Convertech & e-Print, 1 (2). 47 - 51 (5). ISSN 2185-6931
Agbro, E, Tomlin, AS orcid.org/0000-0001-6621-9492, Zhang, W et al. (5 more authors) (2018) Chemical Kinetic Modelling Study on the Influence of n-butanol blending on the Combustion, Autoignition and Knock Properties of Gasoline and its Surrogate in a Spark Ignition Engine. Energy & Fuels, 32 (10). pp. 10065-10077. ISSN 0887-0624
Agbro, E, Zhang, W, Tomlin, AS orcid.org/0000-0001-6621-9492 et al. (1 more author) (2018) Experimental Study on the Influence of n-butanol Blending on the Combustion, Autoignition and Knock Properties of Gasoline and its Surrogate in a Spark Ignition Engine. Energy and Fuels, 32 (10). pp. 10052-10064. ISSN 0887-0624
Al-Jenabi, O. orcid.org/0000-0002-5300-4326, Aslam, Z., Cochrane, R.F. et al. (1 more author) (2024) Microstructural characterisation and compound formation in rapidly solidified SiGe alloy. Journal of Alloys and Compounds, 992. 174560. ISSN 0925-8388
Al-Jenabi, O. orcid.org/0000-0002-5300-4326, Mullis, A.M. and Cochrane, R. (2022) Anomalous compound formation in Si-Ge thermoelectric materials. In: The UK Solidification Workshop 2022, 07-08 Jun 2022, London, UK.
Al-Shahrany, A.S., Bradley, D., Lawes, M. et al. (2 more authors) (2006) Darrieus-landau and thermo-acoustic instabilities in closed vessel explosions. Combustion Science and Technology, 178 (10 & 1). pp. 1771-1802. ISSN 1563-521X
Al-Yasiri, M, Al-Khateeb, M and Wen, D (2018) Examination of drill pipe corrosion in water-based drilling fluids under wellbore conditions. Corrosion Engineering, Science and Technology, 53 (3). pp. 183-187. ISSN 1478-422X
Al-Yasiri, M, Al-Gailani, A orcid.org/0000-0001-9290-0636 and Wen, D orcid.org/0000-0003-3492-7982 (2020) Numerical Study of Cuttings Transport of Nanoparticle-Based Drilling Fluid. Engineering Reports, 2 (5). e12154. ISSN 2577-8196
Albadr, J, Tayal, S and Alasadi, M (2013) Heat transfer through heat exchanger using Al₂O₃ nanofluid at different concentrations. Case Studies in Thermal Engineering, 1 (1). pp. 38-44. ISSN 2214-157X
Algahtani, A, Neville, A, Shrestha, S et al. (1 more author) (2013) Erosion resistance of surface engineered 6000 series aluminium alloy. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 227 (11). 1204 - 1214. ISSN 2041-305X
Ali, I, Radice, G and Kim, J (2010) Backstepping control design with actuator torque bound for spacecraft attitude maneuver. Journal of Guidance, Control, and Dynamics, 33 (1). 254 - 259. ISSN 0731-5090
Alnaqi, AA, Shrestha, S, Barton, DC et al. (1 more author) (2014) Optimisation of alumina coated lightweight brake rotor. SAE Technical Papers. 2014-01-2501. ISSN 0148-7191
Awad, A, Burns, A orcid.org/0000-0002-3448-7510, Waleed, M et al. (2 more authors) (2018) Latent and sensible energy storage enhancement of nano-nitrate molten salt. Solar Energy, 172 (2). pp. 191-197. ISSN 0038-092X
Azzawi, IDJ, Mao, X and Jaworski, AJ (2016) Design, Fabrication and Characterization of Low Speed Open-jet Wind Tunnel. In: Ao, SI, Gelman, L, Hukins, DWL, Hunter, A and Korsunsky, AM, (eds.) Proceeings of World Congress on Engineering 2016. World Congress on Engineering 2016, 29 Jun - 01 Jul 2016, London, UK. Newswood Limited , pp. 883-888. ISBN 978-988-14048-0-0
B
Barker, R, Hu, X and Neville, A (2013) The influence of high shear and sand impingement on preferential weld corrosion of carbon steel pipework in CO-saturated environments. Tribology International, 68. 17 - 25. ISSN 0301-679X
Barker, R, Hu, X, Neville, A et al. (1 more author) (2013) Inhibition of flow-induced corrosion and erosion-corrosion for carbon steel pipe work from an offshore oil and gas facility. Corrosion: journal of science and engineering, 69 (2). 193 - 203. ISSN 0010-9312
Barrie, J, Culmer, PR, Hunter, L et al. (4 more authors) (2015) In vivo characterisation of the grasper-instrument interface in laparoscopic surgery. In: British Journal of Surgery. Society of Academic and Research Surgery (SARS) Annual Meeting, 07-08 Jan 2015, Durham University, UK. Wiley , 16 - 16.
Bawazer, LA, Ihli, J, Levenstein, MA orcid.org/0000-0002-2309-3743 et al. (3 more authors) (2018) Enzymatically-Controlled Biomimetic Synthesis of Titania/Protein Hybrid Thin films. Journal of Materials Chemistry B, 6. pp. 3979-3988. ISSN 2050-750X
Beake, BD, Davies, MI, Liskiewicz, TW et al. (2 more authors) (2013) Nano-scratch, nanoindentation and fretting tests of 5-80 nm ta-C films on Si(1 0 0). Wear, 301 (1-2). 575 - 582. ISSN 0043-1648
Beake, BD, Harris, AJ and Liskiewicz, TW (2013) Review of recent progress in nanoscratch testing. Tribology - Materials, Surfaces and Interfaces, 7 (2). 87 - 96. ISSN 1751-5831
Beake, BD, Harris, AJ, Liskiewicz, TW et al. (5 more authors) (2021) Friction and electrical contact resistance in reciprocating nano-scale wear testing of metallic materials. Wear, 474-475. 203866. ISSN 0043-1648
Beake, BD, McMaster, SJ orcid.org/0000-0002-7339-2469, Liskiewicz, TW et al. (1 more author) (2021) Influence of Si- and W- doping on micro-scale reciprocating wear and impact performance of DLC coatings on hardened steel. Tribology International, 160. 107063. ISSN 0301-679X
Bhamji, R. orcid.org/0009-0005-6573-1722, Owen, J. orcid.org/0000-0003-0778-0858, Huggan, M. orcid.org/0000-0002-3297-4964 et al. (3 more authors) (2024) Electrochemical investigation on localised corrosion under silica sand deposit layers of carbon steel within a bespoke test cell. Corrosion Science, 228. 111744. ISSN 0010-938X
Bournias-Varotsis, A, Friel, RJ, Harris, RA orcid.org/0000-0002-3425-7969 et al. (1 more author) (2018) Ultrasonic Additive Manufacturing as a form-then-bond process for embedding electronic circuitry into a metal matrix. Journal of Manufacturing Processes, 32. pp. 664-675. ISSN 1526-6125
Bradley, D., Lawes, M., Liu, K. et al. (2 more authors) (2007) Laminar burning velocities of lean hydrogen-air mixtures at pressures up to 1.0 MPa. Combustion and Flame, 149 (1-2). pp. 162-172. ISSN 0010-2180
Bradley, D., Sheppard, C.G.W., Suardjaja, I.M. et al. (1 more author) (2004) Fundamentals of high-energy spark ignition with lasers. Combustion and Flame, 138 (1-2). pp. 55-77. ISSN 0010-2180
Bressloff, N.W. orcid.org/0000-0002-4488-9687 (2022) Leaflet Stresses During Full Device Simulation of Crimping to 6 mm in Transcatheter Aortic Valve Implantation, TAVI. Cardiovascular Engineering and Technology, 13 (5). pp. 735-750. ISSN 1869-408X
Brittain, K, Morina, A, Yang, L et al. (1 more author) (2022) Impact of thermal cycles on tribological properties and oxidation of MoS2 coatings. Tribologie und Schmierungstechnik, 69 (1). pp. 50-59. ISSN 0724-3472
Bryant, M, Farrar, R, Brummitt, K et al. (2 more authors) (2013) Fretting corrosion of fully cemented polished collarless tapered stems: the influence of PMMA bone cement. Wear, 301 (1-2). 290 - 299. ISSN 0043-1648
Bryant, M, Farrar, R, Freeman, R et al. (2 more authors) (2013) Fretting corrosion characteristics of polished collarless tapered stems in a simulated biological environment. Tribology International, 65. 105 - 112. ISSN 0301-679X
Bryant, M, Hu, X, Farrar, R et al. (3 more authors) (2013) Crevice corrosion of biomedical alloys: A novel method of assessing the effects of bone cement and its chemistry. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 101 B (5). 792 - 803. ISSN 1552-4973
C
Camargo, FR and Henson, B (2015) Conceptualising computerized adaptive testing for measurement of latent variables associated with physical objects. In: Journal of Physics: Conference Series. 2014 Joint IMEKO TC1-TC7-TC13 Symposium: Measurement Science Behind Safety and Security, 03-05 Sep 2014, Madeira, Portugal. Institute of Physics Publishing .
Chandler, JH, Culmer, PR, Jayne, DG et al. (1 more author) (2015) Assessment of electrochemical properties of a biogalvanic system for tissue characterisation. Bioelectrochemistry, 101. 138 - 145. ISSN 1567-5394
Childs, THC, Arrazola, P-J, Aristimuno, P et al. (2 more authors) (2018) Ti6Al4V metal cutting chip formation experiments and modelling over a wide range of cutting speeds. Journal of Materials Processing Technology, 255. pp. 898-913. ISSN 0924-0136
Contreras, A, Raxworthy, MJ, Wood, S et al. (2 more authors) (2019) Photodynamically Active Electrospun Fibers for Antibiotic-Free Infection Control. ACS Applied Bio Materials, 2 (10). pp. 4258-4270. ISSN 2576-6422
Crossland, S. orcid.org/0000-0002-1183-0275, Siddle, H. orcid.org/0000-0002-6015-332X, Brockett, C. orcid.org/0000-0002-6664-7259 et al. (1 more author) (2023) Evaluating the use of a novel low-cost measurement insole to characterise plantar foot strain during gait loading regimes. Frontiers in Bioengineering and Biotechnology, 11. 1187710. ISSN 2296-4185
Crow, B., Grafstrom, R., Hongisto, V. et al. (9 more authors) (2025) Emerging screening platform characterises aminoquinoline structure–activity relationships with phospholipid layers. Bioelectrochemistry, 164. 108927. ISSN 1567-5394
Culmer, PR, Brooks, PC, Strauss, DN et al. (4 more authors) (2014) An Instrumented Walking-Aid to Assess and Retrain Gait. IEEE Transactions on Mechatronics, 19 (1). 141 - 148. ISSN 1083-4435
Currie, M., Barton, D., Huang, Y. et al. (2 more authors) (2023) Comparative Life Cycle Assessment (LCA) of Lightweight Novel Environmentally Friendly Brake Rotors. In: Eurobrake Conference 2023. Eurobrake Conference 2023, 12-14 Sep 2023, Barcelona, Spain. TBC .
D
Davie, D. orcid.org/0009-0000-1982-7292, Masters, L., Shuttleworth, M. orcid.org/0000-0002-0538-6438 et al. (4 more authors) (2025) The effect of interlayer drying on the ceramic paste extrusion process. Ceramics International, 51 (8). pp. 10681-10690. ISSN 0272-8842
Davie, D. orcid.org/0009-0000-1982-7292, Masters, L., Shuttleworth, M. et al. (2 more authors) (2024) Process Development and Control for Sensor-Informed Hybrid-Additive Manufacturing. In: Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium 2024. 335th Annual International Solid Freeform Fabrication Symposium (SFF2024), 11-14 Aug 2024, Austin, Texas, USA. The University of Texas at Austin .
Davis Birch, W.A. orcid.org/0000-0002-3352-1721, Moura, I.B. orcid.org/0000-0002-3019-7196, Ewin, D.J. orcid.org/0000-0001-6044-5368 et al. (4 more authors) (2023) MiGut: A scalable in vitro platform for simulating the human gut microbiome—Development, validation and simulation of antibiotic-induced dysbiosis. Microbial Biotechnology, 16 (6). pp. 1312-1324. ISSN 1751-7915
Dent, F.J. orcid.org/0000-0003-4991-1940, Tyagi, G., Esat, F. et al. (2 more authors) (2024) Tuneable Topography and Hydrophobicity Mode in Biomimetic Plant‐Based Wax Coatings. Advanced Functional Materials, 34 (1). 2307977. ISSN 1616-301X
Dhakal, N. orcid.org/0000-0002-9346-7229, Espejo, C., Morina, A. orcid.org/0000-0001-8868-2664 et al. (1 more author) (2024) Tribological performance of 3D printed neat and carbon fiber reinforced PEEK composites. Tribology International, 193. 109356. ISSN 0301-679X
Dong, S. orcid.org/0000-0003-4782-5934, Gallagher, J. orcid.org/0000-0002-3341-175X, Jackson, A. et al. (1 more author) (2023) The Use of Kinematic Features in Evaluating Upper Limb Motor Function Learning Progress Based on Machine Learning. In: 2023 International Conference on Rehabilitation Robotics (ICORR). 2023 International Conference on Rehabilitation Robotics (ICORR), 24-28 Sep 2023, Singapore. Institute of Electrical and Electronics Engineers (IEEE) .
Duff, L orcid.org/0000-0002-4295-6356, Scarsbrook, AF orcid.org/0000-0002-4243-032X, Mackie, SL orcid.org/0000-0003-2483-5873 et al. (4 more authors) (2022) A methodological framework for AI-assisted diagnosis of active aortitis using radiomic analysis of FDG PET–CT images: Initial analysis. Journal of Nuclear Cardiology, 29 (6). pp. 3315-3331. ISSN 1071-3581
Duff, LM orcid.org/0000-0002-4295-6356, Scarsbrook, AF orcid.org/0000-0002-4243-032X, Ravikumar, N orcid.org/0000-0003-0134-107X et al. (10 more authors) (2023) An Automated Method for Artifical Intelligence Assisted Diagnosis of Active Aortitis Using Radiomic Analysis of FDG PET-CT Images. Biomolecules, 13 (2). 343. ISSN 2218-273X
Dutta, S. orcid.org/0000-0002-9906-6477 (2024) Adaptive sliding mode controller development to improve rail network efficiency through virtual coupling: a case study evidence. In: Vekkalagadda, M.R.K., Vineesh, K.P. and Sharma, S.K., (eds.) Railway Engineering Technology: Developments and Innovations. CRC Press: Taylor and Francis Group . (In Press)
Dutta, S. orcid.org/0000-0002-9906-6477, Ambur, R., Olaby, O. et al. (3 more authors) (2022) Continuous Time Parameter Estimation Method for a Railway Track Switch Actuator. In: Proceedings of 2022 UKACC 13th International Conference on Control (CONTROL). 2022 UKACC 13th International Conference on Control (CONTROL), 20-22 Apr 2022, Plymouth, United Kingdom. IEEE , pp. 56-59. ISBN 9781665452007
Dutta, S. orcid.org/0000-0002-9906-6477, Harrison, T., Ward, C. et al. (2 more authors) (2024) A Framework for Dynamic Modelling of Railway Track Switches Considering the Switch Blades, Actuators and Control Systems. Railway Engineering Science, 32. pp. 162-176. ISSN 2662-4745
E
Elders, V., Sheehan, S., Wilson, A.D. et al. (3 more authors) (2010) Head–torso–hand coordination in children with and without developmental coordination disorder. Developmental Medicine & Child Neurology, 52 (3). pp. 238-243. ISSN 1469-8749
Elkington, R.J. orcid.org/0009-0009-0229-4931, Hall, R.M. orcid.org/0000-0001-5504-6717, Beadling, A.R. orcid.org/0000-0001-5501-0140 et al. (2 more authors) (2023) Highly lubricious SPMK-g-PEEK implant surfaces to facilitate rehydration of articular cartilage. Journal of the Mechanical Behavior of Biomedical Materials, 147. 106084. ISSN 1751-6161
F
Fairweather, M., Ormsby, M.P., Sheppard, C.G.W. et al. (1 more author) (2009) Turbulent burning rates of methane and methane-hydrogen mixtures. Combustion and Flame, 156 (4). pp. 780-790. ISSN 00102180
Filippou, V orcid.org/0000-0001-9890-9658, Redmond, AC orcid.org/0000-0002-8709-9992, Bennion, J et al. (2 more authors) (2020) Capturing accelerometer outputs in healthy volunteers under normal and simulated-pathological conditions using ML classifiers*. In: 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC). 2020 42nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) in conjunction with the 43rd Annual Conference of the Canadian Medical and Biological Engineering Society, 20-24 Jul 2020, Montreal, Canada. IEEE , pp. 4604-4607. ISBN 9781728119915
Filippou, V orcid.org/0000-0001-9890-9658 and Tsoumpas, C orcid.org/0000-0002-4971-2477 (2018) Recent advances on the development of phantoms using 3D printing for imaging with CT, MRI, PET, SPECT, and ultrasound. Medical Physics, 45 (9). e740-e760. ISSN 0094-2405
Flatters, IJ, Otten, L, Witvliet, A et al. (6 more authors) (2012) Predicting the effect of surface texture on the qualitative form of prehension. PLoS One, 7 (3). ARTN e32770. e32770 - e32770. ISSN 1932-6203
G
Gandhi, R orcid.org/0000-0002-9581-9312, Cawthorne, C, Craggs, LJL orcid.org/0000-0001-9192-1072 et al. (9 more authors) (2021) Cell proliferation detected using [18F]FLT PET/CT as an early marker of abdominal aortic aneurysm. Journal of Nuclear Cardiology, 28 (5). pp. 1961-1971. ISSN 1071-3581
Gandhi, R orcid.org/0000-0002-9581-9312 and Tsoumpas, C orcid.org/0000-0002-4971-2477 (2019) Preclinical Imaging Biomarkers for Postischaemic Neurovascular Remodelling. Contrast Media & Molecular Imaging, 2019. 3128529. ISSN 1555-4309
Green, DC orcid.org/0000-0002-0578-2369, Holden, MA orcid.org/0000-0003-3060-7615, Levenstein, MA orcid.org/0000-0002-2309-3743 et al. (6 more authors) (2019) Controlling the fluorescence and room-temperature phosphorescence behaviour of carbon nanodots with inorganic crystalline nanocomposites. Nature Communications, 10. 206. ISSN 2041-1723
Green, DC orcid.org/0000-0002-0578-2369, Ihli, J, Thornton, PD orcid.org/0000-0003-3876-1617 et al. (10 more authors) (2016) 3D Visualisation of Additive Occlusion and Tunable Full-Spectrum Fluorescence in Calcite. Nature Communications, 7. 13524. ISSN 2041-1723
H
Hamood, A, Mao, X orcid.org/0000-0002-9004-2081 and Jaworski, AJ (2016) Two-Stage Thermoacoustic Electricity Generator for Waste Heat Recovery. In: Ao, SI, Gelman, L, Hukins, DWL, Hunter, A and Korsunsky, AM, (eds.) Proceedings of World Congress on Engineering 2016. World Congress on Engineering 2016, 29 Jun - 01 Jul 2016, London, UK. International Association of Engineers , pp. 944-949. ISBN 978-988-14048-0-0
Hayatgheib, Y. orcid.org/0000-0001-5907-6171, Baraka-Lokmane, S., Taleb, W. orcid.org/0000-0003-2179-7963 et al. (3 more authors) (2022) A Polyaniline-Based Scale Inhibitor with Enhanced Retention and Exceptional Thermal Properties for Squeeze Treatment at HTHP Conditions. In: Proceedings of 2022 SPE International Oilfield Scale Conference and Exhibition. SPE International Oilfield Scale Conference and Exhibition 2022, 25-26 May 2022, Aberdeen, Scotland. Society of Petroleum Engineers . ISBN 978-1-61399-858-8
Hoddy, B., Ahmed, N., Al-Lamee, K. et al. (3 more authors) (2021) Investigating the material modelling of a polymeric bioresorbable scaffold via in-silico and in-vitro testing. Journal of the Mechanical Behavior of Biomedical Materials, 120. 104557. ISSN 1751-6161
Hoddy, B, Ahmed, N, Al-Lamee, K et al. (3 more authors) (2022) Investigating the Equivalent Plastic Strain in a Variable Ring Length and Strut Width Thin-Strut Bioresorbable Scaffold. Cardiovascular Engineering and Technology, 13 (6). pp. 899-914. ISSN 1869-408X
Hoddy, B, Ahmed, N, Al-lamee, K et al. (2 more authors) (2022) Exploring a parallel rheological framework to capture the mechanical behaviour of a thin-strut polymeric bioresorbable coronary scaffold. Journal of The Mechanical Behavior of Biomedical Materials, 130. 105154. ISSN 1751-6161
Holmes, R, Kirk, S, Tronci, G orcid.org/0000-0002-9426-4220 et al. (2 more authors) (2017) Influence of telopeptides on the structural and physical properties of polymeric and monomeric acid-soluble type I collagen. Materials Science and Engineering: C, 77. pp. 823-827. ISSN 0928-4931
Holmes, R, Yang, X orcid.org/0000-0002-0144-2826, Dunne, A et al. (3 more authors) (2017) Thiol-ene photo-click collagen-PEG hydrogels: impact of water-soluble photoinitiators on cell viability, gelation kinetics and rheological properties. Polymers, 9 (6). p. 226. ISSN 2073-4360
Horne, JE, Walko, M, Calabrese, AN et al. (5 more authors) (2018) Rapid Mapping of Protein Interactions Using Tag‐Transfer Photocrosslinkers. Angewandte Chemie, 130 (51). pp. 16930-16934. ISSN 0044-8249
Hu, X, Barker, R, Neville, A et al. (1 more author) (2013) Evaluating inhibitor performance in CO-saturated, erosion-corrosion environments. In: NACE - International Corrosion Conference Series. Corrosion 2013, 19-23 Mar 2013, Orlando, Florida, USA. NACE International , 3182 - 3202. ISBN 9781627481458
Hua, Y, Barker, R and Neville, A (2015) Comparison of corrosion behaviour for X-65 carbon steel in supercritical CO2-saturated water and water-saturated/unsaturated supercritical CO2. Journal of Supercritical Fluids, 97. 224 - 237. ISSN 0896-8446
Hua, Y, Barker, R and Neville, A (2014) Effect of temperature on the critical water content for general and localised corrosion of X65 carbon steel in the transport of supercritical CO2. International Journal of Greenhouse Gas Control, 31. 48 - 60. ISSN 1750-5836
Humphreys, J. orcid.org/0000-0001-5759-2092, Li, J., Wan, Y. et al. (2 more authors) (2023) Bio-inspired Gait Transitions for Quadruped Locomotion. IEEE Robotics and Automation Letters, 8 (10). pp. 6131-6138. ISSN 2377-3766
I
Ibrahiim, K., Thomas, B. orcid.org/0000-0002-5461-0491, Waters, D. et al. (23 more authors) (2023) Let It Be Named – Performing Change. University of Leeds.
Ihli, J, Levenstein, MA orcid.org/0000-0002-2309-3743, Kim, Y-Y orcid.org/0000-0002-8503-4554 et al. (8 more authors) (2020) Ptychographic X-ray Tomography Reveals Additive Zoning in Nanocomposite Single Crystals. Chemical Science, 11 (2). pp. 355-363. ISSN 2041-6520
Ilas, DC, Baboolal, TG, Churchman, SM et al. (5 more authors) (2020) The osteogenic commitment of CD271+CD56+ bone marrow stromal cells (BMSCs) in osteoarthritic femoral head bone. Scientific Reports, 10. 11145. ISSN 2045-2322
Iyer, K, Keeling, D and Hall, R (2022) Application of Hardware-in-the-Loop Simulation for the Development and Testing of Advanced Control Systems for Joint Wear Simulators. In: Proceedings of 2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE). 2022 8th International Conference on Mechatronics and Robotics Engineering (ICMRE), 10-12 Feb 2022, Munich, Germany. IEEE , pp. 44-49. ISBN 978-1-6654-8377-3
J
Jackson, A.E., Holt, R.J., Culmer, P.R. et al. (6 more authors) (2007) Dual robot system for upper limb rehabilitation after stroke: the design process. Proceedings Institute of Mechanical Engineers Part C, 221 (7). pp. 845-857. ISSN 0954-4062
Jowers, I, Prats, M, McKay, A et al. (1 more author) (2013) Evaluating an eye tracking interface for a two-dimensional sketch editor. Computer-Aided Design, 45 (5). 923 - 936. ISSN 0010-4485
K
Kadem, O. orcid.org/0000-0002-4192-1047 and Kim, J. orcid.org/0000-0002-3456-6614 (2024) Mitigation of state of charge estimation error due to noisy current input measurement. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 238 (1). 34 -46. ISSN 0959-6518
Kapasa, ER, Giannoudis, PV, Jia, X et al. (2 more authors) (2017) The Effect of RANKL/OPG Balance on Reducing Implant Complications. Journal of Functional Biomaterials, 8 (4). 42. ISSN 2079-4983
Kapoor, A., Jepson, N., Bressloff, N.W. et al. (3 more authors) (2023) The road to the ideal stent: A review of stent design optimisation methods, findings, and opportunities. Materials & Design, 237. 112556. ISSN 0264-1275
Kapur, N, Hewson, R, Sleigh, PA et al. (3 more authors) (2011) A Review of Gravure Coating Systems. Convertech & e-Print, 1 (4). 56 - 60 (5). ISSN 2185-6931
Kassab-Bachi, A orcid.org/0000-0001-7601-2532, Ravikumar, N orcid.org/0000-0003-0134-107X, Wilcox, RK et al. (2 more authors) (2023) Contribution of Shape Features to Intradiscal Pressure and Facets Contact Pressure in L4/L5 FSUs: An In-Silico Study. Annals of Biomedical Engineering, 51 (1). pp. 174-188. ISSN 0090-6964
Kelmers, E orcid.org/0000-0002-5133-4700, Szuba, A, King, SW et al. (4 more authors) (2023) Smart knee implants: an overview of current technologies and future possibilities. Indian Journal of Orthopaedics, 57 (5). pp. 635-642. ISSN 0019-5413
Keogh, W, Neville, A, Liu, Q et al. (9 more authors) (2020) Lead sulfide scaling in multiphase systems and co-precipitation in the presence of calcium carbonate. Journal of Petroleum Science and Engineering, 188. 106919. p. 106919. ISSN 0920-4105
Kherbeet, A, Reza Safaei, M, Mohammed, HA et al. (4 more authors) (2016) Heat transfer and fluid flow over microscale backward and forward facing step: A review. International Communications in Heat and Mass Transfer, 76. pp. 237-244. ISSN 0735-1933
Kim, Y-Y orcid.org/0000-0002-8503-4554, Freeman, CL orcid.org/0000-0002-6326-1211, Gong, X et al. (9 more authors) (2017) The Effect of Additives on the Early Stages of Growth of Calcite Single Crystals. Angewandte Chemie International Edition, 56 (39). pp. 11885-11890. ISSN 1433-7851
Kim, Y-Y orcid.org/0000-0002-8503-4554, Freeman, CL, Gong, X et al. (9 more authors) (2017) The Effect of Additives on the Early Stages of Growth of Calcite Single Crystals. Angewandte Chemie, 129 (39). pp. 12047-12052. ISSN 0044-8249
Krishnadas, R, Kim, J, McLean, J et al. (5 more authors) (2013) The envirome and the connectome: exploring the structural noise in the human brain associated with socioeconomic deprivation. Frontiers in Human Neuroscience, 7. 722. ISSN 1662-5161
Kumar, N, Bhavsar, H, Mahesh, PVS et al. (4 more authors) (2022) Wire Arc Additive Manufacturing – A revolutionary method in additive manufacturing. Materials Chemistry and Physics, 285. 126144. ISSN 0254-0584
L
Lanigan, J, Zhao, H, Morina, A et al. (1 more author) (2015) Tribochemistry of silicon and oxygen doped, hydrogenated Diamond-like Carbon in fully-formulated oil against low additive oil. Tribology International, 82 (Part B). 431 - 442. ISSN 0301-679X
Lawes, M., Lee, Y., Mokhtar, A.S. et al. (1 more author) (2008) Laser ignition of iso-octane air aerosols. Combustion Science and Technology, 180 (2). pp. 296-313. ISSN 00102202
Lawes, M., Ormsby, M.P., Sheppard, C.G.W. et al. (1 more author) (2005) Variation of turbulent burning rate of methane, methanol, and iso-octane air mixtures with equivalence ratio at elevated pressure. Combustion Science and Technology, 177 (7). pp. 1273-1289. ISSN 1563-521X
Li, J, Wasley, T, Ta, D et al. (7 more authors) (2018) Micro electronic systems via multifunctional additive manufacturing. Rapid Prototyping Journal, 24 (4). pp. 752-763. ISSN 1355-2546
Li, J. orcid.org/0000-0002-5995-0487, Lu, A., Xie, Y. et al. (2 more authors) (2024) Auto-ignition characteristics of coal-based naphtha. Applied Energy, 359. 122768. ISSN 0306-2619
Li, J. orcid.org/0000-0002-5995-0487, Xie, Y., Elsayed Morsy, M. et al. (1 more author) (2024) Laminar burning Velocities, Markstein numbers and cellular instability of spherically propagation Ethane/Hydrogen/Air premixed flames at elevated pressures. Fuel, 364. 131078. ISSN 0016-2361
Li, L., Dutta, S. orcid.org/0000-0002-9906-6477, Dixon, R. et al. (1 more author) (2022) Fault Tolerant Actuation of a Railway Track Switch: a Simulation Study. In: 2022 UKACC 13th International Conference on Control (CONTROL). 2022 UKACC 13th International Conference on Control (CONTROL), 20-22 Apr 2022, Plymouth, UK. IEEE , pp. 207-212. ISBN 9781665452007
Li, L, Dutta, S orcid.org/0000-0002-9906-6477, Dixon, R et al. (1 more author) (2023) Railway track switch simulation: a new dynamic model for studying actuator and switch blade dynamics. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 237 (6). pp. 775-783. ISSN 0954-4097
Liskiewicz, TW, Beake, BD, Schwarzer, N et al. (1 more author) (2013) Short note on improved integration of mechanical testing in predictive wear models. Surface and Coatings Technology, 237. 212 - 218. ISSN 0257-8972
Littlejohns, A., Please, H., Musasizi, R. et al. (13 more authors) (2023) Descriptive account of the first use of the LeVe CPAP System, a new frugal CPAP System, in adult patients with COVID-19 Pneumonitis in Uganda. Tropical Medicine and Health, 51. 42. ISSN 1349-4147
Liu, Q orcid.org/0000-0002-1132-9392, Wang, C, Neville, A et al. (3 more authors) (2022) Corrosion Characteristics of Iron-Nickel-Chromium Alloys in Molten Nitrate Salts Under Isothermal and Thermal Cycling Conditions. In: Proceedings of the AMPP Annual Conference + Expo. AMPP Annual Conference + Expo, 06-10 Mar 2022, San Antonio, Texas, USA. National Association of Corrosion Engineers .
Liu, Q orcid.org/0000-0002-1132-9392, Xu, J, Shen, L et al. (4 more authors) (2020) Effect of Relative Humidity on Mechanical Degradation of Medium Mn Steels. Materials, 13 (6). 1304. ISSN 1996-1944
Liu, Q orcid.org/0000-0002-1132-9392, Yang, S, Shen, L et al. (5 more authors) (2020) The effect of hydrogen concentration on the fracture surface of medium Mn steels. Engineering Failure Analysis, 108. 104263. ISSN 1350-6307
Liu, QY orcid.org/0000-0002-1132-9392, Yan, Y, Xu, JP et al. (4 more authors) (2020) Effect of Prestrain on Hydrogen-Induced Delayed Cracking for Medium Mn Steels. Journal of Materials Engineering and Performance, 29 (3). pp. 1929-1938. ISSN 1059-9495
Lu, X., Liang, M., Meng, Q. orcid.org/0000-0002-6708-5585 et al. (1 more author) (2025) Effects of gait patterns on the viscoelastic squeeze-film lubrica-tion of hip replacements. Lubricants, 13 (3). 131. ISSN 2075-4442
M
Mahesh, PVS orcid.org/0000-0003-2005-5124, Akhil, S, Chiranjeevi, P et al. (5 more authors) (2021) Developing composites of zinc and hydroxyapatite for degradable orthopedic implant applications. IOP Conference Series: Materials Science and Engineering, 1116 (1). 012002. ISSN 1757-8981
Man, K, Jiang, L-H orcid.org/0000-0001-6398-0411, Foster, R et al. (1 more author) (2017) Immunological Responses to Total Hip Arthroplasty. Journal of Functional Biomaterials, 8 (3). 33. ISSN 2079-4983
Masters, L. orcid.org/0009-0006-1522-560X, Davie, D. orcid.org/0009-0000-1982-7292, Cevallos, P.J. et al. (5 more authors) (2025) Strategic Layer Reworking using Hybrid Additive Manufacturing for Defect-Free Ceramic Parts. Additive Manufacturing. 104752. ISSN 2214-7810 (In Press)
Masters, L. orcid.org/0009-0006-1522-560X, Green, T., Davie, D. et al. (3 more authors) (2024) Defect-free Ceramic Hybrid-AM using Intelligent Layer Reworking. In: Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium 2024. 35th Annual International Solid Freeform Fabrication Symposium 2024, 11-14 Aug 2024, Austin, Texas, USA. The University of Texas at Austin , pp. 1467-1475.
McKay, A, Baker, R, Kundu, S et al. (2 more authors) (2013) Realising design engineering capability across distributed enterprise networks. In: Wu, X, Shi, Y, Du, J and Guo, B, (eds.) Proceedings of the ninth international symposium on global manufacturing and China. The Ninth International Symposium on Global Manufacturing and China, 07-08 Sep 2013, Hangzhou, China. Institute for Manufacturing, University of Cambridge , 111 - 116. ISBN 978-1-902546-18-6
McKay, A, de Pennington, A and Giard, J (2013) Integrating design knowledge in educational curricula: reflections from the development of a multi-disciplinary programme in Product Design. In: Proceedings of the ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 04-07 Aug 2013, Portland, Oregon, USA. American Society of Mechanical Engineers . ISBN 978-0-7918-5584-3
McMaster, SJ orcid.org/0000-0002-7339-2469, Liskiewicz, TW, Neville, A et al. (1 more author) (2020) Probing fatigue resistance in multi-layer DLC coatings by micro- and nano-impact: Correlation to erosion tests. Surface and Coatings Technology, 402. 126319. ISSN 0257-8972
Melancon, M, Hunter, P, Hourcade, S et al. (7 more authors) (2014) The effect of four commercially available steel decontamination processes on the performance of external coatings. In: NACE - International Corrosion Conference Series. International Corrosion Conference Series 2014, 09-13 Mar 2014, San Antonio, Texas, USA. National Assoc. of Corrosion Engineers International .
Mirashi, V.U., Kockelmann, W., Kapur, N. orcid.org/0000-0003-1041-8390 et al. (7 more authors) (2025) Exploring spatial resolution enhancements on IMAT for steel corrosion studies. Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, 1073. 170284. ISSN 0168-9002
Mitchell, D orcid.org/0000-0002-0200-8327 (2017) Honey bee engineering: Top ventilation and top entrances. American Bee Journal, 157 (8). pp. 887-889. ISSN 0002-7626
Mitchell, D orcid.org/0000-0002-0200-8327 (2019) Nectar, humidity, honey bees (Apis mellifera) and varroa in summer: a theoretical thermofluid analysis of the fate of water vapour from honey ripening and its implications on the control of Varroa destructor. Interface, 16 (156). 20190048. ISSN 1742-5662
Mitchell, D orcid.org/0000-0002-0200-8327 (2019) Thermal efficiency extends distance and variety for honeybee foragers: analysis of the energetics of nectar collection and desiccation by Apis mellifera. Journal of the Royal Society Interface, 16 (150). 20180879. ISSN 1742-5689
Mitchell, D orcid.org/0000-0002-0200-8327 (2023) Simulating the built environment for another globally distributed species. In: Proceedings of BSO Conference 2022: 6th Conference of IBPSA-England. 6th Conference of IBPSA-England, 13-14 Dec 2022, Bath. IBPSA .
Mitchell, D. orcid.org/0000-0002-0200-8327 (2023) Correction: ‘Thermal efficiency extends distance and variety for honey bee foragers: analysis of the energetics of nectar collection and dessication by <i>Apis mellifera</i> ’ (2019), by Derek Mitchell. Journal of The Royal Society Interface, 20 (208). p. 20230598. ISSN 1742-5689
Mitchell, D. orcid.org/0000-0002-0200-8327 (2023) Honeybee cluster—not insulation but stressful heat sink. Journal of The Royal Society Interface, 20 (208). ARTN 20230488. ISSN 1742-5689
Mitchell, DM orcid.org/0000-0002-0200-8327 (2022) Honey bee (Apis mellifera) size determines colony heat transfer when brood covering or distributed. International Journal of Biometeorology, 66 (8). pp. 1653-1663. ISSN 0020-7128
Moisley, KM, El-Jawhari, JJ orcid.org/0000-0002-0580-4492, Owston, H et al. (4 more authors) (2019) Optimising proliferation and migration of mesenchymal stem cells using platelet products: A rational approach to bone regeneration. Journal of Orthopaedic Research, 37 (6). pp. 1329-1338. ISSN 0736-0266
Morano, R. orcid.org/0000-0002-5054-137X (2022) Diachronic Variation in the Omani Arabic Vernacular of the Al-ʿAwābī District. Cambridge Semitic Languages and Cultures, 14 . Open Book Publishers . ISBN 978-1-80064-723-7
Morina, A, Zhao, H and Mosselmans, JFW (2014) In-situ reflection-XANES study of ZDDP and MoDTC lubricant films formed on steel and diamond like carbon (DLC) surfaces. Applied Surface Science, 297. 167 - 175. ISSN 0169-4332
Mushari, NA, Soultanidis, G, Duff, L et al. (4 more authors) (2022) Exploring the utility of radiomic feature extraction to improve the diagnostic accuracy of cardiac sarcoidosis using FDG PET. Frontiers in Medicine, 9. 840261. ISSN 2296-858X
O
Olaby, O, Dutta, S orcid.org/0000-0002-9906-6477, Harrison, T et al. (2 more authors) (2021) Realisation of a Novel Functionally Redundant Actuation System for a Railway Track-Switch. Applied Sciences, 11 (2). 702. pp. 1-20. ISSN 2076-3417
Onyeji, L, Mohammed, S orcid.org/0000-0002-4197-4990 and Kale, G orcid.org/0000-0002-3021-5905 (2018) Electrochemical response of micro-alloyed steel under potentiostatic polarization in CO₂ saturated brine. Corrosion Science, 138. pp. 146-153. ISSN 0010-938X
Owston, HE, Ganguly, P, Tronci, G orcid.org/0000-0002-9426-4220 et al. (3 more authors) (2019) Colony Formation, Migratory, and Differentiation Characteristics of Multipotential Stromal Cells (MSCs) from “Clinically Accessible” Human Periosteum Compared to Donor-Matched Bone Marrow MSCs. Stem Cells International, 2019. 6074245. ISSN 1687-966X
P
Pessu, FO, Barker, R, Neville, A et al. (1 more author) (2013) The Role of synthetic hydrocarbon on corrosion behavior of X-65 (UNS K03014) carbon steel in a multi-phase flow system. In: NACE - International Corrosion Conference Series. Corrosion 2013, 19-23 Mar 2013, Orlando, Florida, USA. NACE International , 1171 - 1188. ISBN 9781627481458
Phillips, L. orcid.org/0009-0005-1179-2474, Valavanis, A. orcid.org/0000-0001-5565-0463, Burnett, A.D. orcid.org/0000-0003-2175-1893 et al. (3 more authors) (2024) Innovative Approaches to Fabricate Terahertz Optics with Additive Manufacturing: Manufacture and THz Characterisation of a Silica-Filled Photopolymer. In: Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium 2024. 35th Annual International Solid Freeform Fabrication Symposium (SFF2024), 11-14 Aug 2024. The University of Texas at Austin , pp. 629-636.
Phillips, L. orcid.org/0009-0005-1179-2474, Valavanis, A., Burnett, A.D. et al. (3 more authors) (2025) Process and material constraints of additive manufacturing for fabrication of terahertz quasi-optical components. Applied Materials Today, 42. 102619. ISSN 2352-9407
R
Ramadhan, AA orcid.org/0000-0002-0711-572X, Kapur, N, Summers, JL et al. (1 more author) (2017) Numerical modelling of electrohydrodynamic airflow induced in a wire-to-grid channel. Journal of Electrostatics, 87. pp. 123-139. ISSN 0304-3886
Richardson, RC, Nagendran, A and Scott, RG (2012) Experimental tests of 'Bidi-bot': A mechanism designed for clearing loose debris from the path of mobile search and rescue robots. Advanced Robotics, 26 (15). 1799 - 1823. ISSN 0169-1864
Roberts, PJ and Sheppard, CGW (2013) The influence of residual gas NO content on knock onset of Iso-Octane, PRF, TRF and ULG mixtures in SI engines. SAE International Journal of Engines, 6 (4). 2028 - 2043. ISSN 1946-3936
Rymuza, Z and Liskiewicz, T (2013) Micro-tribology. Tribology - Materials, Surfaces and Interfaces, 7 (2). 61 - 62. ISSN 1751-5831
S
Serrano, C., Hernández, J.J., Mandilas, C. et al. (2 more authors) (2008) Laminar burning behaviour of biomass gasification-derived producer gas. International Journal of Hydrogen Energy, 33 (2). pp. 851-862. ISSN 03603199
Singh, S., Bai, M. orcid.org/0000-0002-6267-9771, Matthews, A. et al. (2 more authors) (2025) Critical raw material-free multi-principal alloy design for a net-zero future. Scientific Reports, 15. 3132. ISSN 2045-2322
Sivasubramaniyan, K, Ilas, DC orcid.org/0000-0001-6404-6620, Harichandan, A et al. (8 more authors) (2018) Bone Marrow–Harvesting Technique Influences Functional Heterogeneity of Mesenchymal Stem/Stromal Cells and Cartilage Regeneration. American Journal of Sports Medicine, 46 (14). pp. 3521-3531. ISSN 0363-5465
Stratton-Powell, AA and Tipper, JL orcid.org/0000-0002-8719-0323 (2016) Characterization of UHMWPE Wear Particles. In: Kurtz, SM, (ed.) UHMWPE Biomaterials Handbook: Ultra High Molecular Weight Polyethylene in Total Joint Replacement and Medical Devices. Elsevier , pp. 635-653. ISBN 9780323354011
Stringer, J, Althagathi, TM, Tse, CCW et al. (8 more authors) (2016) Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality. Manufacturing Review, 3. 12. ISSN 2265-4224
Sun, J. and Zhou, C. (2025) Advancing Robotic Jumping with CVT Enhanced SEA. In: Towards Autonomous Robotic Systems. 25th Annual Conference Towards Autonomous Robotic Systems (TAROS), 21-23 Aug 2024, London, UK. Lecture Notes in Computer Science (Part 1). Springer , Cham, Switzerland , pp. 73-84. ISBN 978-3-031-72061-1
T
Tarn, MD orcid.org/0000-0001-5827-4125, Sikora, SNF orcid.org/0000-0002-8560-8837, Porter, GCE orcid.org/0000-0001-8027-6549 et al. (2 more authors) (2021) Homogeneous Freezing of Water Using Microfluidics. Micromachines, 12 (2). 223. ISSN 2072-666X
Taylor, GW, Culmer, PR, Hunter, L et al. (4 more authors) (2015) Development of atraumatic, non-slip, force-constrained laparoscopic forceps. In: British Journal of Surgery. Society of Academic and Research Surgery (SARS) Annual Meeting, 07-08 Jan 2015, Durham University, UK. Wiley , 45 - 45.
Thomas, B. orcid.org/0000-0002-5461-0491, Hamdache, H., Marsden, J. et al. (4 more authors) (2023) Mapping Creative Education. Open Innovations, Leeds, UK.
Thomas, B. orcid.org/0000-0002-5461-0491 and Marsden, J. orcid.org/0000-0002-4407-3389 (2025) Culture on the Doorstep: A toolkit for educators. Report. Leeds Cultural Education Partnership , Leeds.
Thornley, B, Beadling, R, Bryant, M et al. (1 more author) (2020) Investigation of the Repassivation Process of CoCrMo in Simulated Biological Fluids. CORROSION, 76 (6). pp. 539-552. ISSN 0010-9312
Turnbull, R. P. orcid.org/0000-0001-7334-0880, Corser, J., Orlando, G. et al. (5 more authors) (2025) Development of a Body-Worn Textile-Based Strain Sensor: Application to Diabetic Foot Assessment. Sensors, 25 (7). 2057. ISSN 1424-8220
U
Ukpai, J, Barker, R, Hu, X et al. (1 more author) (2013) An in-situ investigation of CO flow-induced corrosion and erosion-corrosion of UNS K03014 pipeline materials using combined acoustic emission and LPR methods. In: NACE - International Corrosion Conference Series. Corrosion 2013, 17-23 Mar 2013, Orlando, Florida, USA. . ISBN 978-162748145-8
Ukpai, JI, Barker, R, Hu, X et al. (1 more author) (2013) Determination of particle impacts and impact energy in the erosion of X65 carbon steel using acoustic emission technique. Tribology International, 65. 161 - 170. ISSN 0301-679X
Ukpai, JI, Barker, R, Hu, X et al. (1 more author) (2012) Exploring the erosive wear of X65 carbon steel by acoustic emission method. Wear, 301 (1-2). 370 - 382. ISSN 0043-1648
Utami, ID, Holt, RJ and McKay, A (2014) A Sociotechnical systems approach to managing material flow in the Indonesian fertiliser industry. In: UNSPECIFIED PLM 14-International Conference on Product Lifecycle Management, 07-09 Jul 2014, Keio Japan. . (Unpublished)
V
Vancoillie, J, Sharpe, G, Lawes, M et al. (1 more author) (2014) The turbulent burning velocity of methanol-air mixtures. Fuel, 130. 76 - 91. ISSN 0016-2361
Veremieiev, S, Brown, A, Gaskell, PH et al. (3 more authors) (2014) Modelling the flow of droplets of bio-pesticide on foliage. Interfacial Phenomena and Heat Transfer, 2 (1). 1 - 14. ISSN 2169-2785
W
Wang, D orcid.org/0000-0001-8260-9183, de Boer, G orcid.org/0000-0002-5647-1771, Nadimi, S et al. (2 more authors) (2022) A Fully Coupled Normal and Tangential Contact Model to Investigate the Effect of Surface Roughness on the Partial Slip of Dissimilar Elastic Materials. Tribology Letters, 70 (4). 98. ISSN 1023-8883
Wilkinson, P. orcid.org/0000-0001-9360-1486, Jackson, B. orcid.org/0000-0002-4917-1199, Fermor, H. et al. (1 more author) (2024) A new mRNA structure prediction based approach to identifying improved signal peptides for bone morphogenetic protein 2. BMC Biotechnology, 24. 34. ISSN 1472-6750
X
Xu, N. orcid.org/0000-0002-8291-6519, Wang, C. orcid.org/0000-0002-4301-3974, Wang, D. et al. (2 more authors) (2024) Coating sensing strategy for understanding the governing factors of tribofilm growth on diamond-like carbon. Tribology International, 192. 109335. ISSN 0301-679X
Y
Yahya, SG, Mao, X and Jaworski, AJ (2015) Characterization of inexpensive stack materials for use in standing wave thermoacoustic refrigerators. In: Proceedings of ICR2015. ICR2015 : The 24th IIR International Congress of Refrigeration, 16-22 Aug 2015, Yokohama, Japan. International Institute of Refrigeration .
Yahya, SG, Mao, X and Jaworski, AJ (2015) Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures. In: Proceedings of ICR2015. ICR2015 : The 24th IIR International Congress of Refrigeration, 16-22 Aug 2015, Yokohama, Japan. International Institute of Refrigeration .
Yahya, SG, Mao, X and Jaworski, AJ (2016) Two-stage Looped-tube Thermoacoustic Cooler – Design and Preliminary Testing. In: Ao, SI, Gelman, L, Hukins, DWL, Hunter, A and Korsunsky, AM, (eds.) Proceedings of the World Congress on Engineering 2016. WCE 2016, 29 Jun - 01 Jul 2016, London, UK. Newswood Limited , pp. 1044-1049. ISBN 978-988-14048-0-0
Yang, B., Zhang, D., Guo, L. et al. (2 more authors) (2025) Fault Diagnosis and Prognosis of Railway Vehicle System. Measurement Science and Technology, 36 (2). 020202. ISSN 0957-0233
Yiasemidou, M, Garvey, J, Culmer, P et al. (1 more author) (2015) Developing a patient specific training tool for minimally invasive total mesorectal excision (MI-TME). In: British Journal of Surgery. Society of Academic and Research Surgery (SARS) Annual Meeting, 07-08 Jan 2015, Durham University, UK. Wiley , 17 - 18.
Yilmaz, D and Dehghani-Sanij, AA (2018) A Review of Assistive Robotic Exoskeletons and Mobility Disorders in Children to Establish Requirements of Such Devices for Paediatric Population. In: Reinventing Mechatronics : Proceedings of Mechatronics 2018. Mechatronics 2018 - Reinventing Mechatronics, 19-21 Sep 2018, Glasgow, UK. . ISBN 978-1-909522-37-4 (Unpublished)
Z
Zakria, M, Maqbool, H orcid.org/0000-0003-3193-4984, Hussain, T et al. (4 more authors) (2017) Heuristic Based Gait Event Detection for Human Lower Limb Movement. In: IEEE EMBS International Conference on Biomedical & Health Informatics (BHI 2017). BHI 2017, 16-19 Feb 2017, Orlando, Florida, USA. IEEE , pp. 337-340. ISBN 978-1-5090-4179-4
Zhao, Y, Kim, J and Filippone, M (2013) Aggregation algorithm towards large-scale Boolean network analysis. IEEE Transactions on Automatic Control, 58 (8). 8. 1976 - 1985. ISSN 0018-9286
Zhao, Y-B, Kim, J, Sun, X-M et al. (1 more author) (2013) On the delay effects of different channels in Internet-based networked control systems. International Journal of Systems Science, 44 (11). 11. 2119 - 2129. ISSN 0020-7721
Zhao, X., Eren, O.C. orcid.org/0000-0002-2665-3611, Molyneux, A. et al. (3 more authors) (2025) Development of a methodology for in vitro and in silico simulation of transcatheter aortic valve replacement using 3D-printed valve frames. Computers in Biology and Medicine, 186. 109690. ISSN 0010-4825
Zomorodian, K, Pourshahid, S, Sadatsharifi, A et al. (4 more authors) (2016) Biosynthesis and Characterization of Silver Nanoparticles by Aspergillus Species. BioMed Research International, 2016. 5435397. ISSN 2314-6133
Zupli, N.D., McKay, A. and Chittenden, R. (2023) Towards the prediction of carbon consequences in early design decisions. In: Liu, A. and Kara, S., (eds.) Procedia CIRP. The 33rd CIRP Design Conference, 17-19 May 2023, Sydney, NSW, Australia. Elsevier , pp. 620-625.