Items where authors include "Lewis, R."
Article
Yang, Y., Aydin, A., Mumtaz, K. orcid.org/0000-0001-8083-1661 et al. (3 more authors) (2025) Novel use of laser melting and optical pre-heat to control white etching layer formation on rail steels. Tribology International, 204. 110472. ISSN 0301-679X
Nicholas, G. orcid.org/0000-0002-0901-3276, Gray, W. orcid.org/0000-0001-7620-9474, Poulter, M. et al. (2 more authors) (2025) A review of techniques for measurement of forces and neutral temperatures in railway track. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 239 (4). pp. 307-332. ISSN 0954-4097
Abani, O., Abbas, A., Abbas, F. et al. (8021 more authors) (2025) Higher dose corticosteroids in hospitalised COVID-19 patients requiring ventilatory support (RECOVERY): a randomised, controlled, open-label, platform trial. eClinicalMedicine, 81. 103080. ISSN 2589-5370
Jaffé, J. orcid.org/0000-0003-2355-5765, Lanigan, J. orcid.org/0000-0001-9860-9559 and Lewis, R. orcid.org/0000-0002-4300-0540 (2025) Field-based investigation of low adhesion leaf layers: assessing layer initiation and environmental influences. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 239 (2). pp. 116-131. ISSN 0954-4097
Wu, B., Li, J., Zhang, S. et al. (8 more authors) (2025) Study on the application amount optimization of water-based friction modifier based on field experiments. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 239 (2). pp. 96-105. ISSN 0954-4097
Maramizonouz, S., Nadimi, S. orcid.org/0000-0002-0971-7089, Skipper, W. orcid.org/0000-0001-8315-2656 et al. (1 more author) (2025) CFD–DEM modelling of particle entrainment in wheel–rail interface: a parametric study on particle characteristics. Railway Engineering Science. ISSN 2662-4745
Huddart, R., Hafeez, S., Griffin, C. et al. (24 more authors) (2025) Dose-escalated Adaptive Radiotherapy for Bladder Cancer: Results of the Phase 2 RAIDER Randomised Controlled Trial. European Urology, 87 (1). pp. 60-70. ISSN 0302-2838
Maramizonouz, S., Nadimi, S. orcid.org/0000-0002-0971-7089 and Lewis, R. orcid.org/0000-0002-4300-0540 (2024) CFD-DEM modelling of particle entrainment in wheel–rail interface: a parametric study on train characteristics. Acta Mechanica, 235 (10). pp. 6077-6087. ISSN 0001-5970
Suhr, B., Skipper, W.A. orcid.org/0000-0001-8315-2656, Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2024) DEM modelling of surface indentations caused by granular materials: application to wheel–rail sanding. Computational Particle Mechanics, 11 (5). pp. 2353-2367. ISSN 2196-4378
Nielsen, K. orcid.org/0000-0001-9685-9570, Agate, C., Yarker, J. et al. (1 more author) (2024) “It’s business”: a qualitative study of moral injury in business settings; experiences, outcomes and protecting and exacerbating factors. Journal of Business Ethics, 194 (2). pp. 233-249. ISSN 0167-4544
Clarke, B., Tomlinson, K. orcid.org/0000-0003-4691-5057, Karunakaran, A. et al. (5 more authors) (2024) The effectiveness of chalk as a friction modifier for finger pad contact with rocks of varying roughness. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology. ISSN 1754-3371
Wilby, A.P.G. orcid.org/0009-0005-0731-0997, Corteen, J. orcid.org/0009-0008-7619-1081, Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2024) Novel in-situ real-time line scan optical monitoring of wear and surface damage initiation in a laboratory twin disc test. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 238 (8). pp. 956-966. ISSN 0954-4097
Zhang, C., Nadimi, S., Maramizonouz, S. et al. (2 more authors) (2024) A discrete element model of high-pressure torsion test to assess the effect of particle characteristics in the interface. Journal of Tribology, 146 (8). 081501. ISSN 0742-4787
Jaffe, J., White, B., Lanigan, J. et al. (1 more author) (2024) A novel methodology for developing ultra-low adhesion leaf layers on a full-scale wheel/rail rig. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 238 (6). pp. 736-741. ISSN 0954-4097
Fish, R. orcid.org/0000-0002-4239-6993, Blackwell, S. orcid.org/0000-0002-2819-3727, Knight, S.R. orcid.org/0000-0003-0448-3719 et al. (308 more authors) (2024) Defining standards and core outcomes for clinical trials in prehabilitation for colorectal surgery (DiSCO): modified Delphi methodology to achieve patient and healthcare professional consensus. British Journal of Surgery, 111 (6). znae056. ISSN 0007-1323
Pereira, H.B. orcid.org/0000-0001-5415-6586, Echeverri, E.A.A., Alves, L.H.D. et al. (3 more authors) (2024) Influence of HAZ microstructure on RCF under twin-disc test of a flash-butt welded rail. Wear, 546-547. 205324. ISSN 0043-1648
Wagner, R., Carré, M.J., Perrault, C.M. et al. (2 more authors) (2024) Assessing friction and damage of cell monolayers on soft substrates in vitro. Journal of The Royal Society Interface, 21 (215). 20230696. ISSN 1742-5689
Morecroft, R., Tomlinson, K. orcid.org/0000-0003-4691-5057, Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2024) Friction between human skin and incontinence pads in the presence of barrier protection products. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 238 (6). pp. 644-654. ISSN 0954-4119
Lewis, R., Scott, R., Bala, B. et al. (3 more authors) (2024) Household water use and greywater management in Khulna city, Bangladesh. International Journal of Hygiene and Environmental Health, 259. 114376. ISSN 1438-4639
Xie, Y., Shi, Z., Ding, H. et al. (5 more authors) (2024) Influence of shear yield strength of rail material on the shakedown limit in shakedown map. Tribology International, 194. 109490. ISSN 0301-679X
Januschewsky, M. orcid.org/0000-0001-6736-2143, Trummer, G., Six, K. et al. (1 more author) (2024) Discrete element modelling of rolling contact fatigue and crack closure with different bond laws. Wear, 544-545. 205268. ISSN 0043-1648
Lee, Z.S., Maiti, R., Carré, M. et al. (1 more author) (2024) The effect of stiffness on friction, surface strain and contact area of a sliding finger pad simulant. Tribology Letters, 72 (2). 58. ISSN 1023-8883
White, B. orcid.org/0000-0002-9653-9945, Lewis, R. orcid.org/0000-0002-4300-0540, Fletcher, D. orcid.org/0000-0002-1562-4655 et al. (3 more authors) (2024) Rail-wheel friction quantification and its variability under lab and field trial conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 238 (5). pp. 569-579. ISSN 0954-4097
Skipper, W. orcid.org/0000-0001-8315-2656, Meierhofer, A., Chalisey, A. et al. (2 more authors) (2024) Generation of sanded creep curves using the extended creep force model with high pressure torsion data. Wear, 542-543. 205278. ISSN 0043-1648
Cuervo, P.A. orcid.org/0000-0003-3647-2096, Toro, A., Meza, J.M. et al. (2 more authors) (2024) A twin-disc study of the role of the surface quality achieved by grinding on the wear resistance and rolling contact fatigue behavior of wheel/rail pairs. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 238 (4). pp. 394-405. ISSN 0954-4097
Wang, W., Huang, J., Ding, H. orcid.org/0000-0003-0094-8646 et al. (4 more authors) (2024) Initiation and evolution of wheel polygonal wear: influence of wheel-rail hardness ratios. Wear, 540-541. 205255. ISSN 0043-1648
Roberts, D., Baker, J., Searle, J. et al. (3 more authors) (2024) Overcoming the performance limitations of hybrid redox flow batteries with modular operation. Journal of Energy Storage, 81. 110280. ISSN 2352-152X
Yildirimli, K. orcid.org/0000-0001-7739-8342, Boschetti Pereira, H., Goldenstein, H. et al. (3 more authors) (2024) Scaling-up laser cladding of rails. Wear, 540-541. 205227. ISSN 0043-1648
Abduraxman, B., Hubbard, P. orcid.org/0000-0003-2730-2538, Harrison, T. et al. (4 more authors) (2024) Acceleration-based friction coefficient estimation of a rail vehicle using feedforward NN: validation with track measurements. Vehicle System Dynamics, 62 (12). pp. 3235-3254. ISSN 0042-3114
Faust, S.N., Haynes, R., Jones, C.E. et al. (7370 more authors) (2024) Immunomodulatory therapy in children with paediatric inflammatory multisystem syndrome temporally associated with SARS-CoV-2 (PIMS-TS, MIS-C; RECOVERY): a randomised, controlled, open-label, platform trial. The Lancet Child & Adolescent Health, 8 (3). pp. 190-200. ISSN 2352-4642
Zhang, B., Nadimi, S. orcid.org/0000-0002-0971-7089 and Lewis, R. orcid.org/0000-0002-4300-0540 (2024) Modelling the adhesion enhancement induced by sand particle breakage at the wheel-rail interface. Wear, 538-539. 205232. ISSN 0043-1648
Lanigan, J.L., Faas, L., Butcher, T. et al. (4 more authors) (2024) Pressure induced transformation of biomass to a highly durable, low friction film on steel. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 480 (2283). 20230450. ISSN 1364-5021
Lee, Z.S. orcid.org/0000-0002-4140-1113, Trummer, G., Harmon, M. et al. (3 more authors) (2024) Studying the transfer mechanisms of water based top-of-rail products in a wheel/rail interaction. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 238 (2). pp. 164-174. ISSN 0954-4097
Abani, O., Abbas, A., Abbas, F. et al. (7989 more authors) (2023) Empagliflozin in patients admitted to hospital with COVID-19 (RECOVERY): a randomised, controlled, open-label, platform trial. The Lancet Diabetes & Endocrinology, 11 (12). pp. 905-914. ISSN 2213-8587
Skipper, W. orcid.org/0000-0001-8315-2656, Nadimi, S., Gutsulyak, D.V. et al. (3 more authors) (2023) Investigating the effect of different adhesion materials on electrical resistance using a high pressure torsion rig. Wear, 532-533. 205116. ISSN 0043-1648
Evans, M.D., Lee, Z.S., Harmon, M. et al. (5 more authors) (2023) Top-of-rail friction modifier performance assessment: high pressure torsion testing; creep force modelling and field validation. Wear, 532-533. 205073. ISSN 0043-1648
Maramizonouz, S. orcid.org/0000-0001-8026-0942, Nadimi, S. orcid.org/0000-0002-0971-7089, Skipper, W. orcid.org/0000-0001-8315-2656 et al. (1 more author) (2023) Characterisation and tribological testing of recycled crushed glass as an alternative rail sand. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 237 (10). pp. 1353-1358. ISSN 0954-4097
Maramizonouz, S. orcid.org/0000-0001-8026-0942, Nadimi, S. orcid.org/0000-0002-0971-7089, Skipper, W.A. orcid.org/0000-0001-8315-2656 et al. (2 more authors) (2023) Numerical modelling of particle entrainment in the wheel–rail interface. Computational Particle Mechanics, 10 (6). pp. 2009-2019. ISSN 2196-4378
Mesaritis, M. orcid.org/0000-0002-1724-5958, Cuervo, P., Santa, J.F. et al. (2 more authors) (2023) Assessment of rail grinding maintenance surface quality and damage propagation in subsequent loading cycles for premium rail grades. Wear, 530-531. 205051. ISSN 0043-1648
Wilby, A. orcid.org/0009-0005-0731-0997, Corteen, J., Lewis, S. et al. (2 more authors) (2023) Nano and micro-indentation driven characterisation of asperity and bulk plasticity at the surface of modern premium rail steels. Wear, 530-531. 205004. ISSN 0043-1648
Folorunso, M.O. orcid.org/0000-0002-6905-0175, Lewis, R. orcid.org/0000-0002-4300-0540 and Lanigan, J.L. orcid.org/0000-0001-9860-9559 (2023) Effects of temperature and humidity on railhead friction levels. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 237 (8). pp. 1009-1024. ISSN 0954-4097
Folorunso, M.O., Watson, M., Martin, A. et al. (3 more authors) (2023) A machine learning approach for real-time wheel-rail interface friction estimation. Journal of Tribology, 145 (9). 091102. ISSN 0742-4787
Liu, J., Yu, P., Chen, P. et al. (5 more authors) (2023) Microstructure, properties and fracture failure mechanism of MAG welded joints of four types of stainless steels. Engineering Failure Analysis, 150. 107326. ISSN 1350-6307
Lewis, R. orcid.org/0000-0002-4300-0540, Trummer, G., Six, K. et al. (5 more authors) (2023) Leaves on the line: characterising leaf based low adhesion on railway rails. Tribology International, 185. 108529. ISSN 0301-679X
Lewis, R. orcid.org/0000-0002-4268-5154 and Anitha, S. orcid.org/0000-0002-6918-3680 (2023) Upskirting: a systematic literature review. Trauma, Violence, & Abuse, 24 (3). pp. 2003-2018. ISSN 1524-8380
Maramizonouz, S. orcid.org/0000-0001-8026-0942, Nadimi, S. orcid.org/0000-0002-0971-7089, Skipper, W. et al. (1 more author) (2023) Characterisation of physical and mechanical properties of seven particulate materials proposed as traction enhancers. Scientific Data, 10. 400. ISSN 2052-4463
Slatter, T. orcid.org/0000-0002-0485-4615, Zalzalah, M. and Lewis, R. (2023) Analysis of reciprocating hammer type impact wear apparatus. Wear, 523. 204816. ISSN 0043-1648
Nar, K. orcid.org/0000-0003-0096-956X, Majewski, C. orcid.org/0000-0003-3324-3511 and Lewis, R. orcid.org/0000-0002-4300-0540 (2023) Evaluating the effect of solid lubricant inclusion on the friction and wear properties of Laser Sintered Polyamide-12 components. Wear, 522. 204873. ISSN 0043-1648
Huddart, R., Hafeez, S., Omar, A. et al. (25 more authors) (2023) Acute Toxicity of Hypofractionated and Conventionally Fractionated (Chemo)Radiotherapy Regimens for Bladder Cancer: An Exploratory Analysis from the RAIDER Trial. Clinical Oncology, 35 (9). pp. 586-597. ISSN 0936-6555
Abani, O., Abbas, A., Abbas, F. et al. (8104 more authors) (2023) Higher dose corticosteroids in patients admitted to hospital with COVID-19 who are hypoxic but not requiring ventilatory support (RECOVERY): a randomised, controlled, open-label, platform trial. The Lancet, 401 (10387). pp. 1499-1507. ISSN 0140-6736
Lewis, R. orcid.org/0000-0002-6768-6188, Boydell, N. orcid.org/0000-0002-2260-8020, Blake, C. orcid.org/0000-0002-7231-4290 et al. (3 more authors) (2023) Involving young people in sexual health research and service improvement: conceptual analysis of patient and public involvement (PPI) in three projects. BMJ Sexual & Reproductive Health, 49 (2). pp. 76-86. ISSN 2515-1991
White, B., Watson, M. and Lewis, R. orcid.org/0000-0002-4300-0540 (2023) A year-round analysis of railway station overruns due to low adhesion conditions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 237 (4). pp. 458-469. ISSN 0954-4097
Zhou, L., Luo, Y.-K. orcid.org/0000-0001-5111-2844 and Lewis, R. orcid.org/0000-0002-4300-0540 (2023) Insulated rail joint (IRJ) contact characterisation-an ultrasonic reflectometry approach for a cross-material interface. Smart Materials and Structures, 32 (3). 034007. ISSN 0964-1726
Gilio, A.K. orcid.org/0000-0003-2834-035X, Thorpe, T.W., Heyam, A. orcid.org/0000-0003-1569-5389 et al. (8 more authors) (2023) A Reductive Aminase Switches to Imine Reductase Mode for a Bulky Amine Substrate. ACS Catalysis, 13 (3). pp. 1669-1677. ISSN 2155-5435
Tomlinson, K., Fletcher, D.I. and Lewis, R. orcid.org/0000-0002-4300-0540 (2023) Evaluation of laser cladding as an in-situ repair method on rail steel. Tribology International, 180. 108210. ISSN 0301-679X
Suhr, B. orcid.org/0000-0002-0259-4418, Skipper, W.A. orcid.org/0000-0001-8315-2656, Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2023) Sanded wheel–rail contacts: experiments on sand crushing behaviour. Lubricants, 11 (2). 38. ISSN 2075-4442
Sammut, M.A. orcid.org/0000-0003-3756-4726, Condliffe, R., Elliot, C. et al. (10 more authors) (2023) Atrial flutter and fibrillation in patients with pulmonary arterial hypertension or chronic thromboembolic pulmonary hypertension in the ASPIRE registry: comparison of rate versus rhythm control approaches. International Journal of Cardiology, 371. pp. 363-370. ISSN 0167-5273
Hu, Y., Wang, W.J., Watson, M. et al. (4 more authors) (2023) Wear of driving versus driven discs in a twin disc rolling-sliding test. Wear, 512-513. 204528. p. 204528. ISSN 0043-1648
Mesaritis, M., Santa, J.F., Molina, L.F. et al. (3 more authors) (2023) Post-field grinding evaluation of different rail grades in full-scale wheel/rail laboratory tests. Tribology International, 177. 107980. ISSN 0301-679X
Skipper, W.A. orcid.org/0000-0001-8315-2656, Nadimi, S., Watson, M. et al. (2 more authors) (2023) Quantifying the effect of particle characteristics on wheel/rail adhesion & damage through high pressure torsion testing. Tribology International, 179. 108190. ISSN 0301-679X
Lanigan, J.L. orcid.org/0000-0001-9860-9559 and Lewis, R. (2023) Understanding friction mechanisms of Si-DLC/steel interfaces under aqueous lubrication. RSC Advances, 13 (15). pp. 10322-10337. ISSN 2046-2069
Zhang, B., Marshall, M. orcid.org/0000-0003-3038-4626 and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) Investigating Al-Si base abradable material removal mechanism with axial movement in labyrinth seal system. Wear, 510-511. 204496. ISSN 0043-1648
Hu, Y., Tan, D.Q., Xu, C. et al. (4 more authors) (2022) Influence of high temperature on the tribological properties of hybrid PTFE/Kevlar fabric composite. Tribology International, 174. 107781. ISSN 0301-679X
Zhou, L., Brunskill, H. and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) Experimental investigation on ball plate contact using ultrasonic reflectometry : from static to dynamic. Ultrasonics, 124. 106733. ISSN 0041-624X
Hartwich, D., Muller, G., Meierhofer, A.. et al. (4 more authors) (2022) A new hybrid approach to predict worn wheel profile shapes. Vehicle System Dynamics, 61 (6). pp. 1548-1564. ISSN 0042-3114
White, B. orcid.org/0000-0002-9653-9945, Lee, Z.S. and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) Towards a standard approach for the twin disc testing of top-of rail friction management products. Lubricants, 10 (6). 124. ISSN 2075-4442
Fukagai, S., Marshall, M. and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) Transition of the friction behaviour and contact stiffness due to repeated high-pressure contact and slip. Tribology International, 170. 107487. ISSN 0301-679X
Wardle, M., Nair, A., Saunders, S. et al. (13 more authors) (2022) Elective lower limb orthopaedic arthroplasty surgery in patients with pulmonary hypertension. Pulmonary Circulation, 12 (1). e12019. ISSN 2045-8940
Zhou, L., Bai, W., Han, Z. et al. (7 more authors) (2022) Comparison of the damage and microstructure evolution of eutectoid and hypereutectoid rail steels under a rolling-sliding contact. Wear, 492-493. 204233. ISSN 0043-1648
Uchegbulam, I., Danby, S.G., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2022) Effect of seasonal change on the biomechanical and physical properties of the human skin. Journal of the Mechanical Behavior of Biomedical Materials, 127. 105058. ISSN 1751-6161
White, B., Kempka, R., Laity, P. et al. (5 more authors) (2022) Iron oxide and water paste rheology and its effect on low adhesion in the wheel/rail interface. Tribology Letters, 70 (1). 8. ISSN 1023-8883
Zhang, B., Marshall, M. orcid.org/0000-0003-3038-4626 and Lewis, R. (2022) An investigation into the role of specimen geometry when undertaking tribological testing on seal fin components. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236 (5). pp. 2588-2601. ISSN 0954-4062
Liu, B., Bruni, S. and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) Numerical calculation of wear in rolling contact based on the Archard equation: Effect of contact parameters and consideration of uncertainties. Wear, 490-491. 204188. ISSN 0043-1648
Nar, K., Majewski, C. orcid.org/0000-0003-3324-3511 and Lewis, R. orcid.org/0000-0002-4300-0540 (2022) A comprehensive characterisation of Laser Sintered Polyamide-12 surfaces. Polymer Testing, 106. 107450. ISSN 0142-9418
Suhr, B., Skipper, W.A., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2022) DEM modelling of railway ballast using the Conical Damage Model: a comprehensive parametrisation strategy. Granular Matter, 24 (1). 40. ISSN 1434-5021
Dwivedi, K., Condliffe, R., Sharkey, M. et al. (12 more authors) (2022) Computed tomography lung parenchymal descriptions in routine radiological reporting have diagnostic and prognostic utility in patients with idiopathic pulmonary arterial hypertension and pulmonary hypertension associated with lung disease. ERJ Open Research, 8 (1). 00549-2021.
Christoforou, P., Dowding, R., Pinna, C. et al. (1 more author) (2021) Two-layer laser clad coating as a replacement for chrome electroplating on forged steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 (23). pp. 7120-7138. ISSN 0954-4062
Fukagai, S., Watson, M., Brunskill, H. et al. (3 more authors) (2021) In situ evaluation of contact stiffness in a slip interface with different roughness conditions using ultrasound reflectometry. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 477 (2255). 20210442. ISSN 1364-5021
Tomlinson, K. orcid.org/0000-0003-4691-5057, Fletcher, D.I. and Lewis, R. (2021) Measuring material plastic response to cyclic loading in modern rail steels from a minimal number of twin-disc tests. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 235 (10). pp. 1203-1213. ISSN 0954-4097
Krier, P., White, B.T., Ferriday, P. et al. (4 more authors) (2021) Vehicle-based cryogenic rail cleaning : an alternative solution to ‘leaves on the line’. Proceedings of the Institution of Civil Engineers - Civil Engineering, 174 (4). pp. 176-182. ISSN 0965-089X
Nightingale, J., Fowler-Davis, S., Grafton, K. et al. (5 more authors) (2021) The role of Allied Health Professions and Nursing Research Internships in developing a research culture: a mixed-methods exploration of stakeholder perspectives. Health Research Policy and Systems, 18 (1). 122. ISSN 1478-4505
Trummer, G., Lee, Z., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2021) Modelling of frictional conditions in the wheel–rail interface due to application of top‐of‐rail products. Lubricants, 9 (10). 100.
Farfan-Cabrera, L.I., Gallardo-Hernández, E.A., Pérez-González, J. et al. (3 more authors) (2021) Evaluation of thermo-oxidized Jatropha bio-oil in lubrication of actual wet clutch materials. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (10). pp. 2021-2033. ISSN 1350-6501
Lanigan, J., Krier, P., Buckley-Johnstone, L. et al. (3 more authors) (2021) Field trials of a methodology for locomotive brake testing to assess friction enhancement in the wheel/rail interface using a representative leaf layer. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 235 (9). pp. 1053-1064. ISSN 0954-4097
Zalzalah, M. orcid.org/0000-0001-5712-5531, Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2021) A new predictive model for normal and compound impact wear. Wear, 480-481. 203954. ISSN 0043-1648
Mendoza, J.C., Vera Cardenas, E.E., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (5 more authors) (2021) Water jet erosion performance of carbon fiber and glass fiber reinforced polymers. Polymers, 13 (17). 2933. ISSN 2073-4360
Hu, Y., Watson, M., Maiorino, M. et al. (8 more authors) (2021) Experimental study on wear properties of wheel and rail materials with different hardness values. Wear, 477. 203831. ISSN 0043-1648
Al-Maliki, H., Meierhofer, A., Trummer, G. et al. (2 more authors) (2021) A new approach for modelling mild and severe wear in wheel-rail contacts. Wear, 476. 203761. ISSN 0043-1648
White, B., Hyland-Knight, J. and Lewis, R. orcid.org/0000-0002-4300-0540 (2021) Assessing the effectiveness of traction gels using full-scale and field testing. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 235 (6). pp. 690-699. ISSN 0954-4097
Kempka, R., Falconer, R., Gutsulyak, D. et al. (1 more author) (2021) Effects of oxide and water on friction of rail steel – new test method and friction mapping. Tribology: Materials, Surfaces and Interfaces, 15 (2). pp. 80-91. ISSN 1751-5831
Preece, D. orcid.org/0000-0002-2755-7517, Hong Ng, T., Tong, H.K. et al. (2 more authors) (2021) The effects of chlorination, thickness, and moisture on glove donning efficiency. Ergonomics, 64 (9). pp. 1205-1216. ISSN 0014-0139
Evans, M., Skipper, W.A., Buckley-Johnstone, L. et al. (3 more authors) (2021) The development of a high pressure torsion test methodology for simulating wheel/rail contacts. Tribology International, 156. 106842. ISSN 0301-679X
Hale, J., Lewis, R. orcid.org/0000-0002-4300-0540 and Carre, M. (2021) Effect of simulated tennis steps and slides on tread element friction and wear. Sports Engineering, 24. 5. ISSN 1369-7072
Wagner, R.M.F., Maiti, R., Carré, M.J. et al. (3 more authors) (2021) Bio-tribology of vascular devices : a review of tissue/device friction research. Biotribology, 25. 100169.
Hinchliff, S. orcid.org/0000-0002-6180-1165, Lewis, R., Wellings, K. et al. (2 more authors) (2021) Pathways to help-seeking for sexual difficulties in older adults: qualitative findings from the third National Survey of Sexual Attitudes and Lifestyles (Natsal-3). Age and Ageing, 50 (2). pp. 546-553. ISSN 0002-0729
Preece, D., Lewis, R. orcid.org/0000-0002-4300-0540 and Carre, M.J. (2021) A critical review of the assessment of medical gloves. Tribology: Materials, Surfaces and Interfaces, 15 (1). pp. 10-19. ISSN 1751-5831
Choudhury, A., Porta, N., Hall, E. et al. (9 more authors) (2021) Hypofractionated radiotherapy in locally advanced bladder cancer : an individual patient data meta-analysis of the BC2001 and BCON trials. Lancet Oncology, 22 (2). pp. 246-255. ISSN 1470-2045
Harmon, M. and Lewis, R. orcid.org/0000-0002-4300-0540 (2021) New laboratory methodologies to analyse the top of rail friction modifier performance across different test scales. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 235 (2). pp. 191-200. ISSN 0954-4097
Hu, Y., Zhou, L., Ding, H.H. et al. (4 more authors) (2021) Microstructure evolution of railway pearlitic wheel steels under rolling-sliding contact loading. Tribology International, 154. 106685. ISSN 0301-679X
Zalzalah, M., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2021) Defining the role of 'zero wear volume' in percussive impact. Wear, 464-465. 203535. ISSN 0043-1648
Hale, J., O'Connell, A., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2021) An evaluation of shoe tread parameters using FEM. Tribology International, 153. 106570. ISSN 0301-679X
Davison, S., Hill, R., Taghizadeh, S. et al. (1 more author) (2021) The theoretical optimization of the arrangement of sandwich filling components. Tribology International, 153. 106615. ISSN 0301-679X
Preece, D., Lewis, R. orcid.org/0000-0002-4300-0540 and Carré, M.J. (2020) Effects of Mucin on the dexterity and tactile sensitivity of medical glove users. Biotribology, 24. 100146.
Hu, Y., Guo, L.C., Maiorino, M. et al. (7 more authors) (2020) Comparison of wear and rolling contact fatigue behaviours of bainitic and pearlitic rails under various rolling-sliding conditions. Wear, 460-461. 203455. ISSN 0043-1648
Watson, M., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2020) Improvements to the linear transform technique for generating randomly rough surfaces with symmetrical autocorrelation functions. Tribology International, 151. 106487. ISSN 0301-679X
Suhr, B., Butcher, T., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2020) Friction and wear in railway ballast stone interfaces. Tribology International, 151. 106498. ISSN 0301-679X
Lai, F., Qu, S., Qin, H. et al. (4 more authors) (2020) A comparison of wear behaviour of heat resistant steel engine valves and TiAl engine valves. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 234 (10). pp. 1549-1562. ISSN 1350-6501
Brunskill, H., Hunter, A., Zhou, L. et al. (2 more authors) (2020) An evaluation of ultrasonic arrays for the static and dynamic measurement of wheel rail contact pressure and area. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (10). pp. 1580-1593. ISSN 1350-6501
Mesaritis, M., Shamsa, M., Cuervo, P. et al. (4 more authors) (2020) A laboratory demonstration of rail grinding and analysis of running roughness and wear. Wear, 456-457. 203379. ISSN 0043-1648
Alturbeh, H., Lewis, R. orcid.org/0000-0002-4300-0540, Six, K. et al. (2 more authors) (2020) Improved modelling of trains braking under low adhesion conditions. Tribology - Materials Surfaces & Interfaces, 14 (3). pp. 131-141. ISSN 1751-5831
Fukagai, S., Brunskill, H.P., Hunter, A.K. et al. (2 more authors) (2020) Transitions in rolling-sliding wheel/rail contact condition during running-in. Tribology International, 149. 105679. ISSN 0301-679X
Ishizaka, K., White, B., Watson, M. et al. (2 more authors) (2020) Influence of temperature on adhesion coefficient and bonding strength of leaf films: a twin disc study. Wear, 454-455. 203330. ISSN 0043-1648
Fukagai, S., Ma, L. and Lewis, R. orcid.org/0000-0002-4300-0540 (2020) Tribological aspects to optimize traction coefficient during running-in period using surface texture. Quarterly Report of RTRI, 61 (3). pp. 184-191. ISSN 0033-9008
Preece, D. orcid.org/0000-0002-2755-7517, Lewis, R. orcid.org/0000-0002-4300-0540 and Carre, M. orcid.org/0000-0003-3622-990X (2020) Efficiency of donning and doffing medical examination gloves. International Journal of Ergonomics, 10 (1). pp. 1-17. ISSN 2180-2149
Watson, M., White, B., Lanigan, J. et al. (2 more authors) (2020) The composition and friction-reducing properties of leaf layers. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476 (2239). 20200057. ISSN 1364-5021
Arnall, A., Fletcher, D. orcid.org/0000-0002-1562-4655 and Lewis, R. (2020) Geospatial and temporal data mining to combine railway low adhesion and rail defect data. Proceedings of the Institution of Civil Engineers: Transport, 173 (4). pp. 273-286. ISSN 0965-092X
Skipper, W., Chalisey, A. and Lewis, R. orcid.org/0000-0002-4300-0540 (2020) A review of railway sanding system research: wheel/rail Isolation, damage, and particle application. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 234 (6). pp. 567-583. ISSN 0954-4097
Kumar Mandal, N., Lewis, R. orcid.org/0000-0002-4300-0540 and Wen, Z. (2020) Quantification of sub-surface railhead material damage due to composite endpost materials of insulated rail joints for cyclic wheel loadings. Engineering Failure Analysis, 113. 104562. ISSN 1350-6307
Mostafid, A.H., Porta, N., Cresswell, J. et al. (14 more authors) (2020) CALIBER - A phase II randomised feasibility trial of chemoablation with mitomycin versus surgical management in low risk non-muscle invasive bladder cancer. BJU International, 125 (6). pp. 817-826. ISSN 1464-4096
Harmon, M., Santa, J.F., Jaramillo, J.A. et al. (3 more authors) (2020) Evaluation of the coefficient of friction of rail in the field and laboratory using several devices. Tribology - Materials, Surfaces & Interfaces, 14 (2). pp. 119-129. ISSN 1751-5831
McNeill, A., Lewis, R. and Freeth, M. orcid.org/0000-0003-0534-9095 (2020) Views of adults with 22q11 deletion syndrome on reproductive choices. American Journal of Medical Genetics Part A, 182 (5). pp. 1284-1287. ISSN 1552-4825
Birtle, A., Johnson, M., Chester, J. et al. (21 more authors) (2020) Adjuvant chemotherapy in upper tract urothelial carcinoma (the POUT trial): a phase 3, open-label, randomised controlled trial. The Lancet, 395 (10232). pp. 1268-1277. ISSN 0140-6736
Suhr, B., Skipper, W.A., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (1 more author) (2020) Shape analysis of railway ballast stones : curvature-based calculation of particle angularity. Scientific Reports, 10. 6045. ISSN 2045-2322
Krier, P., Lanigan, J., Ferriday, P. et al. (1 more author) (2020) Development and implementation of novel cryogenic railhead cleaning technology. Permanent Way Institution Journal, 138. pp. 35-39. ISSN 2057-2425
Hu, Y., Zhou, L., Ding, H.H. et al. (5 more authors) (2020) Investigation on wear and rolling contact fatigue of wheel-rail materials under various wheel/rail hardness ratio and creepage conditions. Tribology International, 143. 106091. ISSN 0301-679X
Lee, Z.S., Maiti, R., Carre, M. et al. (1 more author) (2020) Morphology of a human finger pad during sliding against a grooved plate: A pilot study. Biotribology, 21. 100114. ISSN 2352-5738
Maiti, R., Duan, M.Q., Danby, S. orcid.org/0000-0001-7363-140X et al. (3 more authors) (2020) Morphological parametric mapping of 21 skin sites throughout the body using optical coherence tomography. Journal of the Mechanical Behavior of Biomedical Materials, 102. 103501. ISSN 1751-6161
Anitha, S. orcid.org/0000-0002-6918-3680, Marine, S. and Lewis, R. (2020) Feminist responses to sexual harassment in academia: voice, solidarity and resistance through online activism. Journal of Gender-Based Violence, 4 (1). pp. 9-23. ISSN 2398-6808
Huddart, R., Hall, E., Lewis, R. et al. (9 more authors) (2020) Patient reported quality of life outcomes in patients treated for muscle invasive bladder cancer with radiotherapy +/- chemotherapy in the BC2001 phase III randomised controlled trial. European Urology, 77 (2). pp. 260-268. ISSN 0302-2838
Carrell, J., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2020) Elastomer solubility and stress relaxation in bio-lubricants. Tribology International, 141. ISSN 0301-679X
Buckley-Johnstone, L.E., Trummer, G., Voltr, P. et al. (2 more authors) (2020) Full-scale testing of low adhesion effects with small amounts of water in the wheel/rail interface. Tribology International, 141. ISSN 0301-679X
Hale, J., Lewis, R. orcid.org/0000-0002-4300-0540 and Carré, M.J. (2020) Rubber friction and the effect of shape. Tribology International, 141. ISSN 0301-679X
Narayanan, A., Mostafavi, M., Pirling, T. et al. (4 more authors) (2019) Residual stress in laser cladded rail. Tribology International, 140. 105844. ISSN 0301-679X
Lu, P., Lewis, S.R., Fretwell-Smith, S. et al. (3 more authors) (2019) Laser cladding of rail; the effects of depositing material on lower rail grades. Wear, 438-439. ISSN 0043-1648
Earl, S., Rankin, K.E., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2019) Verification of the use of micro-CT scanning to assess the features of entire squat type defects. Wear, 438-439. 203074. ISSN 0043-1648
Zhou, L., Brunskill, H. and Lewis, R. orcid.org/0000-0002-4300-0540 (2019) Real-time non-invasive measurement and monitoring of wheel-rail contact using ultrasonic reflectometry. Structural Health Monitoring, 18 (5-6). pp. 1953-1965. ISSN 1475-9217
Christoforou, P., Fletcher, D.I. and Lewis, R. orcid.org/0000-0002-4300-0540 (2019) Benchmarking of premium rail material wear. Wear, 436-437. 202990. ISSN 0043-1648
Zhu, Y., Wang, W.-J., Lewis, R. et al. (3 more authors) (2019) A review on wear between railway wheels and rails under environmental conditions. Journal of Tribology, 141 (12). 120801. ISSN 0742-4787
Skipper, W.A. orcid.org/0000-0001-8315-2656, Nadimi, S., Chalisey, A. et al. (1 more author) (2019) Particle characterisation of rail sands for understanding tribological behaviour. Wear, 432-433. 202960. ISSN 0043-1648
Santa, J.F., Cuervo, P., Christoforou, P. orcid.org/0000-0001-8547-4878 et al. (4 more authors) (2019) Twin disc assessment of wear regime transitions and rolling contact fatigue in R400HT – E8 pairs. Wear, 432-433. 102916. ISSN 0043-1648
White, B. and Lewis, R. orcid.org/0000-0002-4300-0540 (2019) Simulation and understanding the wet-rail phenomenon using twin disc testing. Tribology International, 136. pp. 475-486. ISSN 0301-679X
Middleton, J.T., Maulik, A., Lewis, R. et al. (5 more authors) (2019) Arrhythmic burden and outcomes in pulmonary arterial hypertension. Frontiers in Medicine, 6. 169.
Lewis, R., Christoforou, P. orcid.org/0000-0001-8547-4878, Wang, W.J. et al. (3 more authors) (2019) Investigation of the influence of rail hardness on the wear of rail and wheel materials under dry conditions (ICRI wear mapping project). Wear, 430-431. pp. 383-392. ISSN 0043-1648
Buckley-Johnstone, L.E., Trummer, G., Voltr, P. et al. (4 more authors) (2019) Assessing the impact of small amounts of water and iron oxides on adhesion in the wheel/rail interface using High Pressure Torsion testing. Tribology International, 135. pp. 55-64. ISSN 0301-679X
Zhou, L., Brunskill, H., Pletz, M. et al. (3 more authors) (2019) Real time measurement of dynamic wheel-rail contacts using ultrasonic reflectometry. Journal of Tribology, 141 (6). 061401. ISSN 0742-4787
Farfan-Cabrera, L., Gallardo-Hernández, E., Pérez-González, J. et al. (2 more authors) (2019) Effects of Jatropha lubricant thermo-oxidation on the tribological behaviour of engine cylinder liners as measured by a reciprocating friction test. Wear, 426-427 (Part A). pp. 910-918. ISSN 0043-1648
Watson, M., Christoforou, P., Herrera, P. et al. (20 more authors) (2019) An analysis of the quality of experimental design and reliability of results in tribology research. Wear, 426-427 (Part B). pp. 1712-1718. ISSN 0043-1648
Billings, C.G., Lewis, R., Hurdman, J.A. et al. (12 more authors) (2019) Express: The incremental shuttle walk test predicts mortality in non-group 1 pulmonary hypertension: results from the ASPIRE Registry. Pulmonary Circulation, 9 (2). ISSN 2045-8932
Fukagai, S., Ma, L. and Lewis, R. orcid.org/0000-0002-4300-0540 (2019) Tribological approach to optimize traction coefficient during running-in period using surface texture. Wear, 424-425. pp. 223-232. ISSN 0043-1648
Lai, F., Qu, S., Lewis, R. et al. (3 more authors) (2019) The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel. International Journal of Fatigue. ISSN 0142-1123
Lai, F., Qu, S., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (4 more authors) (2019) Optimization of friction welding process parameters for 42Cr9Si2 hollow head and sodium filled engine valve and valve performance evaluation. Materials, 12 (7). 1123. ISSN 1996-1944
Nielsen, K.M. orcid.org/0000-0001-9685-9570, Daniels, K., Nayani, R. et al. (2 more authors) (2019) Out of mind, out of sight? Leading distributed workers to ensure health and safety. Work and Stress, 33 (2). pp. 173-191. ISSN 0267-8373
Stephen, J.T., Hardwick, C., Beaty, P. et al. (2 more authors) (2019) Ultrasonic monitoring of insulated block joints. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 233 (3). pp. 251-261. ISSN 0954-4097
Buckley-Johnstone, L., Harmon, M., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2019) A comparison of friction modifier performance using two laboratory test scales. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 233 (2). pp. 201-210. ISSN 0954-4097
Harmon, M., Powell, B., Barlebo-Larsen, I. et al. (1 more author) (2019) Development of grease tackiness test. Tribology Transactions, 62 (2). pp. 207-217. ISSN 1040-2004
Lai, F., Qu, S., Duan, Y. et al. (6 more authors) (2018) The wear and fatigue behaviours of hollow head & sodium filled engine valve. Tribology International, 128. pp. 75-88. ISSN 0301-679X
Skipper, W., Chalisey, A. and Lewis, R. orcid.org/0000-0002-4300-0540 (2018) A review of railway sanding system research: adhesion restoration and leaf layer removal. Tribology: Materials, Surfaces and Interfaces, 12 (4). pp. 237-251. ISSN 1751-5831
Ishizaka, K., Lewis, S., Hammond, D. et al. (1 more author) (2018) Chemistry of black leaf films synthesised using rail steels and their influence on the low friction mechanism. RSC Advances, 8 (57). pp. 32506-32521. ISSN 2046-2069
Abdulqadir, L.B., Mohd Nor, N., Lewis, R. et al. (1 more author) (2018) Contemporary challenges of soot build-up in IC engine and their tribological implications. Tribology: Materials, Surfaces and Interfaces, 12 (3). pp. 115-129. ISSN 1751-5831
Billings, C.G., Lewis, R., Armstrong, I.J. et al. (10 more authors) (2018) Incremental shuttle walking test distance is reduced in patients with pulmonary hypertension in World Health Organisation functional class I. Frontiers in Medicine, 5. 172. ISSN 2296-858X
Raouf, R. orcid.org/0000-0002-5890-2221, Lolignier, S. orcid.org/0000-0001-5407-4986, Sexton, J.E. orcid.org/0000-0002-9298-876X et al. (13 more authors) (2018) Inhibition of somatosensory mechanotransduction by annexin A6. Science Signaling, 11 (535). ISSN 1945-0877
Charalampopoulos, A., Lewis, R., Hickey, P. orcid.org/0000-0002-4683-7696 et al. (5 more authors) (2018) Pathophysiology and diagnosis of pulmonary hypertension due to left heart disease. Frontiers in Medicine, 5. 174.
Ding, J., Lewis, R., Beagles, A. orcid.org/0000-0001-8306-5632 et al. (1 more author) (2018) Application of grinding to reduce rail side wear in straight track. Wear, 402-40. pp. 71-79. ISSN 0043-1648
Temple, P.D., Harmon, M., Lewis, R. et al. (3 more authors) (2018) Optimisation of grease application to railway track. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 232 (5). pp. 1514-1527. ISSN 0954-4097
Nayani, R., Nielsen, K.M. orcid.org/0000-0001-9685-9570, Daniels, K. et al. (2 more authors) (2018) Out of Sight and Out of Mind? A Literature Review of Occupational Safety and Health Leadership and Management of Distributed Workers. Work and Stress, 32 (2). pp. 124-146. ISSN 0267-8373
Byers, R.A., Maiti, R., Danby, S.G. orcid.org/0000-0001-7363-140X et al. (6 more authors) (2018) Sub-clinical assessment of atopic dermatitis severity using angiographic optical coherence tomography. Biomedical Optics Express, 9 (4). pp. 2001-2017.
White, B.T., Nilsson, R., Olofsson, U. et al. (6 more authors) (2018) A study into the effect of the presence of moisture at the wheel/rail interface during dew and damp conditions. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 232 (4). pp. 979-989. ISSN 0954-4097
Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Friction and wear response of vegetable oils and their blends with mineral engine oil in a reciprocating sliding contact at severe contact conditions. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 232 (3). pp. 244-258. ISSN 1350-6501
Gill, W.S., Marshall, M.B., Lewis, R. et al. (2 more authors) (2018) Failure analysis of pipeline indents using steel precision balls under subsea conditions. Tribology International, 118. pp. 524-537. ISSN 0301-679X
Liu, X., Carre, M.J., Zhang, Q. et al. (3 more authors) (2018) Measuring contact area in a sliding human finger-pad contact. Skin Research and Technology, 24 (1). pp. 31-44. ISSN 0909-752X
Kang, Y., Dong, L., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2018) Experimental study on friction and wear performance of 45 steel and GCr15 steel under the condition of permanent magnetic field. Journal of the Balkan Tribological Association, 24 (1). pp. 23-30. ISSN 1310-4772
Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Hardness characterisation of grey cast iron and its tribological performance in a contact lubricated with soybean oil. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (1). pp. 190-203. ISSN 0954-4062
Lewis, S. orcid.org/0000-0003-2597-9625, Riley, S., Fletcher, D.I. et al. (1 more author) (2018) Optimisation of a railway sanding system for optimal grain entrainment into the wheel–rail contact. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 232 (1). pp. 43-62. ISSN 0954-4097
Bostan, L.E., Noble, C., Smulders, N. et al. (5 more authors) (2017) Measurement of friction-induced changes in pig aorta fibre organization by non-invasive imaging as a model for detecting the tissue response to endovascular catheters. Biotribology, 12. pp. 24-32. ISSN 2352-5738
Liu, X., Maiti, R., Lu, Z.H. et al. (3 more authors) (2017) New non-invasive techniques to quantify skin surface strain and sub-surface layer deformation of finger-pad during sliding. Biotribology, 12. pp. 52-58. ISSN 2352-5738
Harwick, C., Lewis, R. and Stock, R. (2017) The effects of friction management materials on rail with pre-existing RCF surface damage. Wear, 384-385. pp. 50-60. ISSN 0043-1648
Noble, C., van der Sluis, O., Voncken, R.M.J. et al. (4 more authors) (2017) Simulation of arterial dissection by a penetrating external body using cohesive zone modelling. Journal of the Mechanical Behavior of Biomedical Materials, 71. pp. 95-105. ISSN 1751-6161
Lewis, S. orcid.org/0000-0003-2597-9625, Lewis, R., Goodwin, P.S. et al. (4 more authors) (2017) Full-scale testing of laser clad railway track; case study - testing for wear, bend fatigue and insulated block joint lipping integrity. Wear, 376 (Part B). pp. 1930-1937. ISSN 0043-1648
Wang, W.-J., Lewis, S.R., Lewis, R. et al. (3 more authors) (2017) The role of slip ratio in rolling contact fatigue of rail materials under wet conditions. Wear, 376 (B). pp. 1892-1900. ISSN 0043-1648
Carré, M.J., Tan, S.K., Mylon, P.T. et al. (1 more author) (2017) Influence of medical gloves on fingerpad friction and feel. Wear, 376-7 (A). pp. 324-328. ISSN 0043-1648
Wang, W.J., Lewis, R., Evans, M.D. et al. (1 more author) (2017) Influence of Different Application of Lubricants on Wear and Pre-existing Rolling Contact Fatigue Cracks of Rail Materials. Tribology Letters, 65. 58. ISSN 1023-8883
Ishizaka, K., Lewis, S.R. orcid.org/0000-0003-2597-9625 and Lewis, R. (2017) The low adhesion problem due to leaf contamination in the wheel/rail contact: bonding and low adhesion mechanisms. Wear, 378-379. pp. 183-197. ISSN 0043-1648
Lewis, S.R. orcid.org/0000-0003-2597-9625, Riley, S., Fletcher, D.I. et al. (1 more author) (2017) Optimisation of a railway sanding system : adhesion tests. The International Journal of Railway Technology, 6 (2). pp. 87-98. ISSN 2049-5358
Trummer, G., Buckley-Johnstone, L.E., Voltr, P. et al. (3 more authors) (2017) Wheel-rail creep force model for predicting water induced low adhesion phenomena. Tribology International, 109. pp. 409-415. ISSN 0301-679X
Popplewell, H., Carré, M. and Lewis, R. (2017) Measurement of Finger Pad Forces and Friction using Finger Nail Mounted Strain Gauges. Wear, 376. pp. 295-304. ISSN 0043-1648
Carrell, J., Slatter, T., Little, U. orcid.org/0000-0002-0485-4615 et al. (1 more author) (2017) Combining DLC, Shot blasting, chemical dip and nano fullerene surface treatments to reduce wear and friction when used with bio-lubricants in automotive contacts. SAE Technical Papers. 2017-01-0878. ISSN 0148-7191
Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Friction and wear phenomena of vegetable oil based lubricants with additives at severe sliding wear conditions. Tribology Transactions, 61 (2). ISSN 1040-2004
Choudhury, A., West, C.M., Porta, N. et al. (7 more authors) (2017) The predictive and prognostic value of tumour necrosis in muscle invasive bladder cancer patients receiving radiotherapy with or without chemotherapy in the BC2001 trial (CRUK/01/004). British Journal of Cancer, 116 (5). pp. 649-657. ISSN 0007-0920
Vera-Cardenas, E.E., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Sensitivity study of a valve recession model. Open Journal of Applied Sciences, 7 (2). pp. 50-56. ISSN 2165-3917
Vera-Cardenas, E.E., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Sliding Wear Study on the Valve-Seat Insert Contact. Open Journal of Applied Sciences, 7 (2). pp. 42-49. ISSN 2165-3917
Mylon, P., Carré, M.J., Martin, N. et al. (1 more author) (2017) How do gloves affect cutaneous sensibility in medical practice? Two new applied tests. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (1). pp. 28-39. ISSN 0954-4119
Stephen, J., Marshall, M. and Lewis, R. (2017) Relaxation of contact pressure and self-loosening in dynamic bolted joints. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231 (18). pp. 3462-3475. ISSN 0954-4062
Lewis, R., Magel, E., Wang, W-J. et al. (4 more authors) (2017) Towards a Standard Approach for Wear Testing of Wheel and Rail Materials. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (7). pp. 760-774. ISSN 0954-4097
Lewis, S.R., Fretwell-Smith, S., Goodwin, P.S. et al. (6 more authors) (2016) Improving rail wear and RCF performance using laser cladding. Wear, 366. pp. 268-278. ISSN 0043-1648
Stock, R., Stanlake, L., Hardwick, C. et al. (3 more authors) (2016) Material concepts for top of rail friction management – Classification, characterisation and application. Wear, 366-36. C. pp. 225-232. ISSN 0043-1648
Lewis, S.R. orcid.org/0000-0003-2597-9625, Lewis, R., Cotter, J. et al. (2 more authors) (2016) A new method for the assessment of traction enhancers and the generation of organic layers in a twin-disc machine. Wear, 366. pp. 258-267. ISSN 0043-1648
Noble, C., Smulders, N., Lewis, R. et al. (4 more authors) (2016) Controlled peel testing of a model tissue for diseased aorta. Journal of Biomechanics, 49. pp. 3667-3675. ISSN 0021-9290
Mylon, P., Lewis, R., Carré, M.J. et al. (1 more author) (2016) An evaluation of dexterity and cutaneous sensibility tests for use with medical gloves. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (16). pp. 2896-2912. ISSN 0954-4062
Marzia, A., Cremona, M.A., Liu, B. et al. (3 more authors) (2016) Predicting Railway Wheel Wear under Uncertainty of Wear Coefficient, using Universal Kriging. Reliability Engineering and System Safety, 154. pp. 49-59. ISSN 1879-0836
Wang, W.J., Lewis, R., Yang, B. et al. (3 more authors) (2016) Wear and damage transitions of wheel and rail materials under various contact conditions. Wear, 362-36. pp. 146-152. ISSN 0043-1648
Maiti, R., Gerhardt, L.C., Lee, Z.S. et al. (7 more authors) (2016) In vivo measurement of skin surface strain and sub-surface layer deformation induced by natural tissue stretching. Journal of the Mechanical Behavior of Biomedical Materials, 62. pp. 556-569. ISSN 1751-6161
Harmon, M. and Lewis, R. (2016) Review of top of rail friction modifier tribology. Tribology: Materials, Surfaces and Interfaces, 10 (3). pp. 150-162. ISSN 1751-5831
Bostan, L.E., Taylor, Z.A., Carré, M.J. et al. (3 more authors) (2016) A comparison of friction behaviour for ex vivo human, tissue engineered and synthetic skin. Tribology International, 103. C. pp. 487-495. ISSN 0301-679X
Mylon, P., Lewis, R., Carré, M.J. et al. (1 more author) (2016) Evaluation of the effect of medical gloves on dexterity and tactile sensibility using simulated clinical practice tests. International Journal of Industrial Ergonomics, 53. pp. 115-123. ISSN 0169-8141
El Shukri, F. and Lewis, R. (2016) An Experimental Investigation and Improvement of Insulated Rail Joints. Tribology in Industry, 38 (1). pp. 121-126. ISSN 0354-8996
Beaty, P., Temple, B., Marshall, M.B. et al. (1 more author) (2016) Experimental modelling of lipping in insulated rail joints and investigation of rail head material improvements. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 230 (4). pp. 1375-1387. ISSN 0954-4097
Deuis, J., Wingerd, J., Winter, Z. et al. (10 more authors) (2016) Analgesic Effects of GpTx-1, PF-04856264 and CNV1014802 in a Mouse Model of NaV1.7-Mediated Pain. Toxins, 8 (3). 78. ISSN 2072-6651
Santa, J.F., Toro, A. and Lewis, R. (2016) Correlations between rail wear rates and operating conditions in a commercial railroad. Tribology International, 95. pp. 5-12. ISSN 0301-679X
Noble, C., Smulders, N., Green, N.H. orcid.org/0000-0001-5413-0642 et al. (5 more authors) (2016) Creating a model of diseased artery damage and failure from healthy porcine aorta. Journal of the Mechanical Behavior of Biomedical Materials, 60. pp. 378-393. ISSN 1751-6161
Vera Cardenas, E.E., Lewis, R., Martinez Perez, A.I. et al. (4 more authors) (2016) Characterization and wear performance of boride phases over tool steel substrates. Advances in Mechanical Engineering, 8 (2). ISSN 1687-8132
Dong, L., Lewis, R., Li, C.X. et al. (2 more authors) (2015) Finite element assessment of the temperature field couple under joule heat and friction heat between a third rail and collector shoe. Journal Of Engineering Tribology , 229 (9). 1086 - 1094. ISSN 13506501
Singleton, R., Marshall, M.B., Lewis, R. et al. (1 more author) (2015) Rail grinding for the 21st century - Taking a lead from the aerospace industry. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (5). 457 - 465. ISSN 0954-4097
Clarke, J.D., Hallas, K., Lewis, R. et al. (3 more authors) (2015) Understanding the friction measured by standardised test methodologies used to assess shoe-surface slip risk. Journal of Testing and Evaluation, 43 (4). 723 - 734. ISSN 0090-3973
Mohammed, A., Marshall, M.B. and Lewis, R. (2015) Development of a method for assessing erosive wear damage on dies used in aluminium casting. Wear, 332. pp. 1215-1224. ISSN 0043-1648
Lewis, S.R., Lewis, R. and Fletcher, D.I. (2015) Assessment of laser cladding as an option for repairing/enhancing rails. Wear , 330. 581 - 591. ISSN 0043-1648
Brunskill, H., Harper, P. and Lewis, R. (2015) The real-time measurement of wear using ultrasonic reflectometry. WEAR, 332. 1129 - 1133. ISSN 0043-1648
Mylon, P.T., Buckley-Johnstone, L., Lewis, R. et al. (2 more authors) (2015) Factors influencing the perception of roughness in manual exploration: Do medical gloves reduce cutaneous sensibility? Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229 (3). 273 - 284. ISSN 1350-6501
Liu, X., Gad, D., Lu, Z. et al. (3 more authors) (2015) The contributions of skin structural properties to the friction of human finger-pads. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 229 (3). 294 - 311. ISSN 1350-6501
Tasron, D., Maiti, R., Hemming, M. et al. (2 more authors) (2015) Investigating a methodology to measure moisture in skin–textile friction experiments. Footwear Science, 7. S15 - S16. ISSN 1942-4280
Lewis, R., Carre, M.J. orcid.org/0000-0003-3622-990X and Tomlinson, S.E. (2014) Skin friction at the interface between hands and sports equipment. Procedia Engineering, 72. pp. 611-617. ISSN 1877-7058
Dwyer-Joyce, R.S., Yao, C., Lewis, R. et al. (1 more author) (2013) An ultrasonic sensor for monitoring wheel flange/rail gauge corner contact. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 227 (2). pp. 188-195. ISSN 0954-4097
Carre, M.J. orcid.org/0000-0003-3622-990X, Tomlinson, S.E., Collins, J.W. et al. (1 more author) (2012) An assessment of the performance of grip enhancing agents used in sports applications. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 226 (J7). pp. 616-625. ISSN 1350-6501
Lewis, R., Dwyer-Joyce, R.S., Lewis, S.R. et al. (2 more authors) (2012) Tribology of the Wheel-Rail Contact: The Effect of Third Body Materials. International Journal of Railway Technology, 1 (1). pp. 167-194. ISSN 2049-5358
Lewis, R., Tsoraki, C., Broughton, J. et al. (4 more authors) (2011) Abrasive and impact wear of stone used to manufacture axes in Neolithic Greece. Wear, 271 (9-10). pp. 2549-2560. ISSN 0043-1648
Tomlinson, S.E., Carre, M.J. orcid.org/0000-0003-3622-990X, Lewis, R. et al. (1 more author) (2011) Human finger contact with small, triangular ridged surfaces. Wear, 271 (9-10). pp. 2346-2353. ISSN 0043-1648
Tomlinson, S.E., Lewis, R., Liu, X. et al. (2 more authors) (2011) Understanding the friction mechanisms between the human finger and flat contacting surfaces in moist conditions. Tribology Letters, 41 (1). pp. 283-294. ISSN 1023-8883
Pombo, J., Ambrosio, J., Pereira, M. et al. (4 more authors) (2010) A study on wear evaluation of railway wheels based on multibody dynamics and wear computation. Multibody System Dynamics, 24 (3). pp. 347-366. ISSN 1384-5640
Dwyer-Joyce, R.S., Goodman, M.A. and Lewis, R. (2010) A comparative study of ultrasonic direct contact, immersion, and layer resonance methods for assessment of enamel thickness in teeth. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 224 (6). pp. 519-528. ISSN 1350-6501
Tassini, N., Quost, X., Lewis, R. et al. (3 more authors) (2010) A numerical model of twin disc test arrangement for the evaluation of railway wheel wear prediction methods. Wear, 268 (5-6). pp. 660-667. ISSN 0043-1648
Arias-Cuevas, O., Li, Z., Lewis, R. et al. (1 more author) (2010) Rolling-sliding laboratory tests of friction modifiers in dry and wet wheel-rail contacts. Wear, 268 (3-4). pp. 543-551. ISSN 0043-1648
Dwyer-Joyce, R.S., Yao, C., Zhang, J. et al. (2 more authors) (2009) Feasibility Study for Real Time Measurement of Wheel-Rail Contact Using an Ultrasonic Array. Journal of Tribology, 131 (4). 041401. ISSN 0742-4787
Slatter, T., Taylor, H., Lewis, R. et al. (1 more author) (2009) The influence of laser hardening on wear in the valve and valve seat contact. Wear, 267 (5-8). pp. 797-806. ISSN 00431648
Lewis, R. (2009) Friction in a hydraulic motor piston/cam roller contact lined with PTFE impregnated. Wear, 266 (7-8). pp. 888-892. ISSN 0043-1648
Gallardo-Hernandez, E.A. and Lewis, R. (2008) Twin disc assessment of wheel/rail adhesion. Wear, 265 (9-10). pp. 1309-1316. ISSN 0043-1648
Lewis, R., Yoxall, A., Canty, L.A. et al. (1 more author) (2007) Development of engineering design tools to help reduce apple bruising. Journal of Food Engineering, 83 (3). pp. 356-365. ISSN 0260-8774
Lewis, R., Barber, S.C. and Dwyer-Joyce, R.S. (2007) Particle motion and stain removal during simulated abrasive tooth cleaning. Wear, 263 (1-6 SP). pp. 188-197. ISSN 0043-1648
Camacho, J., Lewis, R. and Dwyer-Joyce, R.S. (2007) Wear of a chute in a rice sorting machine. Wear, 263 (1 - 6). pp. 65-73. ISSN 0043-1648
Lewis, R., Barber, S.C. and Dwyer-Joyce, R.S. (2007) Particle motion and stain removal during simulated abrasive tooth cleaning. Wear, 263 (1 - 6). pp. 188-197. ISSN 0043-1648
Lewis, R., Yoxall, A., Marshall, M.B. et al. (1 more author) (2007) Characterising pressure and bruising in apple fruit. Wear, 264 (1-2). pp. 37-46. ISSN 0043-1648
Lewis, R. and Dwyer-Joyce, R.S. (2006) Interactions between toothbrush and toothpaste particles during simulated abrasive cleaning. Proceedings of the Institution of Mechanical Engineers. Part J: Journal of engineering tribology, 220 (8). pp. 755-765. ISSN 1350-6501
Marshall, M.B., Lewis, R., Dwyer-Joyce, R.S. et al. (2 more authors) (2006) Experimental characterization of wheel-rail contact patch evolution. Journal of Tribology, 128 (3). pp. 493-504. ISSN 0742 4787
Dwyer-Joyce, R.S., Lewis, R., Ward, A. et al. (1 more author) (2006) Determination of impact stresses in an automotive chain drive component. SAE Technical Papers, 2006 (01). 0766. ISSN 0148-7191
Marshall, M.B., Lewis, R. and Dwyer-Joyce, R.S. (2006) Characterisation of contact pressure distribution in bolted joints. Strain, 42 (1). pp. 31-43. ISSN 00392103
Ruiz, C., Parikh, A., José, J. et al. (29 more authors) (2006) Measurement of the Ec.m.=184 keV Resonance Strength in the 26gAl(p,gamma)27Si Reaction. Physical Review Letters, 96 (25). pp. 252501-1. ISSN 1079-7114
Green, D.A., Lewis, R. and Dwyer-Joyce, R.S. (2006) Wear effects and mechanisms of soot-contaminated automotive lubricants. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 220 (3). pp. 159-169. ISSN 1350-6501
Lewis, R. and Dwyer-Joyce, R.S. (2005) Wear of human teeth: a tribological perspective. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 1-18. ISSN 1350-6501
Lewis, R., Marshall, M.B. and Dwyer-Joyce, R.S. (2005) Measurement of interface pressure in interference fits. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (2). pp. 127-139. ISSN 0954-4062
Gonzalez-Valadez, M., Dwyer-Joyce, R.S. and Lewis, R. (2005) Ultrasonic reflection from mixed liquid-solid contacts and the determination of interface stiffness. Tribology and Interface Engineering Series, 48. pp. 313-320. ISSN 15723364
Lewis, R. and Dwyer-Joyce, R.S. (2005) Wear of human teeth: a tribological perspective. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 219 (1). pp. 1-18. ISSN 1350-6501
Lewis, R. and Olofsson, U. (2004) Mapping rail wear regimes and transitions. Wear, 257 (7-8). pp. 721-729. ISSN 0043-1648
Lewis, R., Dwyer-Joyce, R.S. and Pickles, M.J. (2004) Interaction between toothbrushes and toothpaste abrasive particles in simulated tooth cleaning. Wear, 257 (3-4). pp. 368-376. ISSN 0043-1648
Lewis, R., Dwyer-Joyce, R.S. and Pickles, M.J. (2004) Interaction between toothbrushes and toothpaste abrasive particles in simulated tooth cleaning. Wear, 257 (3-4). pp. 368-376. ISSN 00431648
D’Auria, J.M., Azuma, R.E., Bishop, S. et al. (23 more authors) (2004) The 21Na(p,gamma)22Mg reaction from Ec.m. = 200 to 1103 keV in novae and x-ray bursts. Physical Review C, 69 (6). Art. No. 065803. ISSN 1089-490X
Lewis, R., Dwyer-Joyce, R.S., Slatter, T. et al. (1 more author) (2004) Valve recession: From experiment to predictive model. VDI Berichte (1813). pp. 79-93. ISSN 0083-5560
Lewis, R. and Dwyer-Joyce, R.S. (2004) Wear mechanisms and transitions in railway wheel steels. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 218 (6). pp. 467-478. ISSN 1350-6501
Marshall, M.B., Lewis, R., Drinkwater, B.W. et al. (1 more author) (2004) An ultrasonic approach for contact stress mapping in machine joints and concentrated contacts. Journal of Strain Analysis for Engineering Design, 39 (4). pp. 339-350. ISSN 0309-3247
Lewis, R. and Dwyer-Joyce, R.S. (2003) Combating automative engine valve recession. Tribology and Lubrication Technology, 59 (10). pp. 48-51. ISSN 0024-7154
Book Section
Lewis, R. and Anitha, S. orcid.org/0000-0002-6918-3680 (2019) Explorations on the nature of resistance: Challenging gender based violence in the academy. In: Crimmins, G., (ed.) Strategies for Resisting Sexism in the Academy: Higher Education, Gender and Intersectionality. Palgrave Studies in Gender and Education ((GED)) . Springer , pp. 75-94. ISBN 9783030048518
Lewis, R. and Anitha, S. orcid.org/0000-0002-6918-3680 (2018) Conclusion: setting the agenda for challenging gender based violence in universities. In: Anitha, S. and Lewis, R., (eds.) Gender based violence in university communities: Policy, prevention and educational interventions. Policy Press , Bristol , pp. 229-240. ISBN 9781447336570
Anitha, S. orcid.org/0000-0002-6918-3680 and Lewis, R. (2018) Introduction: some reflections in these promising and challenging times. In: Anitha, S. and Lewis, R., (eds.) Gender based violence in university communities: Policy, prevention and educational interventions. Policy Press , Bristol , pp. 1-20. ISBN 9781447336570
Lewis, R., Braghin, F., Ward, A. et al. (4 more authors) (2003) Integrating Dynamics and Wear Modelling to Predict Railway Wheel Profile Evolution. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 7-16. ISBN 9163139286
Lewis, R. and Olofsson, U. (2003) Mapping rail wear transitions. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 165-174. ISBN 9163139286
Dwyer-Joyce, R.S., Lewis, R., Gao, N. et al. (1 more author) (2003) Wear and Fatigue of Railway Track Caused by Contamination, Sanding and Surface Damage. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Sheel Systems : CM2003. CHARMEC , Gothenburg , pp. 211-220. ISBN 9163139286
Lewis, R., Dwyer-Joyce, R.S. and Lewis, J. (2003) Wheel/Rail Contact Isolation Due to Track Contamination. In: Ekberg, A., Kabo, E. and Ringsberg, J., (eds.) 6th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems : CM2003. CHARMEC , Gothenburg , pp. 221-230. ISBN 9163139286
Monograph
Lewis, R., Collins, R., Flynn, A. et al. (4 more authors) (2005) A systematic review of cancer waiting time audits. Research Report. CRD Report (27). University of York , York, UK.
Conference or Workshop Item
Marhsall, M.B., Lewis, R., Dwyer-Joyce, R.S. et al. (2 more authors) (2004) Measuring wheel/rail contact stresses using ultrasound. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)
Marhsall, M.B., Lewis, R., Dwyer-Joyce, R.S. et al. (2 more authors) (2004) Ultrasonic characterisation of wheel hub/axle interference fit pressures. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)
Lewis, R., Dwyer-Joyce, R.S., Olofsson, U. et al. (1 more author) (2004) Wheel material wear mechanisms and transitions. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)
Lewis, R., Dwyer-Joyce, R.S., Bruni, S. et al. (3 more authors) (2004) A new CAE procedure for railway wheel tribological design. In: 14th International Wheelset Congress, 17-21 October, Orlando, USA. (Unpublished)
Proceedings Paper
Huddart, R., Birtle, A., Cheung, K.C. et al. (19 more authors) (2023) Randomised phase II trial of adaptive image guided bladder radiotherapy: Disease control data. In: Radiotherapy & Oncology. ESTRO 2023, 13-16 May 2023, Vienna, Austria. Elsevier , S704-S705.
Huddart, R., Birtle, A., Cheung, K.C. et al. (19 more authors) (2023) Randomised phase II trial of adaptive image guided bladder radiotherapy: patient reported outcomes. In: Radiotherapy & Oncology. ESTRO 2023, 13-16 May 2023, Vienna, Austria. Elsevier , S331-S332.
Huddart, R.A., Hafeez, S., Omar, A. et al. (17 more authors) (2023) Randomised phase II trial of adaptive image guided radiotherapy in muscle invasive bladder cancer: Late toxicity and cancer outcomes. In: Journal of Clinical Oncology. 2023 ASCO Genitourinary Cancers Symposium, 16-18 Feb 2023. American Society of Clinical Oncology .
Bernal, E., Spiryagin, M., Stichel, S. et al. (5 more authors) (2022) Friction-slip curves – the pathway from twin-disc tribo measurements to full-scale locomotive multibody simulations. In: ASM/IEEE 2022 Joint Rail Conference. 2022 Joint Rail Conference, 20-21 Apr 2022, Virtual conference. American Society of Mechanical Engineers . ISBN 9780791885758
Dwivedi, K., Lewis, R., Condliffe, R. et al. (6 more authors) (2022) Computed Tomography (CT) features are of diagnostic utility in pre diagnosis Idiopathic Pulmonary Arterial Hypertension (IPAH): a case controlled study. In: American Journal of Respiratory and Critical Care Medicine. American Thoracic Society 2022 International Conference, 13-18 May 2022, San Francisco, CA. American Thoracic Society , a3605-a3605.
Maiti, R., Wagner, R., Martinez Sanchez, N.A. et al. (7 more authors) (2019) From macroscopic to microscopic : experimental and computational methods to investigate bio-tribology. In: Toi, V.V., Le, T.Q., Ngo, H.T. and Nguyen, T.-H., (eds.) 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7). 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7), 27-29 Jun 2018, Ho Chi Minh City, Vietnam. IFMBE Proceedings (69). Springer , pp. 213-216. ISBN 9789811358586
Lewis, R., Billings, C., Johns, C. et al. (9 more authors) (2018) P16 Identifying partial anomalous pulmonary venous drainage (PAPVD) in patients presenting with suspected pulmonary hypertension (PH). In: Thorax. British Thoracic Society Winter Meeting 2018, 05-07 Dec 2018, London, United kingdom. BMJ Publishing Group Ltd and British Thoracic Society , A104.
Lu, P., Lewis, S.R., Fretwell-Smith, S. et al. (2 more authors) (2018) Laser cladding of rail; the effects of depositing material on lower rail grades. In: Li, Z. and Nunex, A., (eds.) Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2018). 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2018), 24-27 Sep 2018, Delft, The Netherlands. CM2018 , pp. 610-617. ISBN 9789461869630
Skipper, W.A. orcid.org/0000-0001-8315-2656, Nadimi, S., Chalisey, A. et al. (1 more author) (2018) Particle characterisation of rail sands for understanding tribological behaviour. In: Li, Z. and Nunez, A., (eds.) Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2018). 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM 2018), 24-27 Sep 2018, Delft, The Netherlands. TU Delft Library , pp. 886-895. ISBN 9789461869630
Carrell, J., Slatter, T. orcid.org/0000-0002-0485-4615 and Lewis, R. orcid.org/0000-0002-4300-0540 (2018) The compatability of multilayer surface treatments with bio-lubricant base oils. In: STLE 2018 Extended Abstracts & Presentations. 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018, 20-24 May 2018, Minneapolis, MN, USA. , Minneapolis, MN, USA , pp. 156-158.
Christoforou, P. orcid.org/0000-0001-8547-4878, Lewis, S.R., Fletcher, D.I. orcid.org/0000-0002-1562-4655 et al. (1 more author) (2018) Benchmarking of premium rail material wear. In: Nunez, A. and Li, Z., (eds.) Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems (CM2018), 24-27 Sep 2018, Delft, The Netherlands. TU Delft , pp. 172-180. ISBN 9789461869630
Byers, R.A., Maiti, R., Danby, S.G. orcid.org/0000-0001-7363-140X et al. (6 more authors) (2017) Characterizing the microcirculation of atopic dermatitis using angiographic optical coherence tomography. In: Choi, B., Zeng, H. and Kollias, N., (eds.) Proceedings of SPIE. SPIE BIOS 2017, 28 Jan - 02 Feb 2017, San Francisco, California. Society of Photo-optical Instrumentation Engineers . ISBN 9781510605152
Morecroft, R., Carre, M.J. orcid.org/0000-0003-3622-990X, Lewis, R. orcid.org/0000-0002-4300-0540 et al. (5 more authors) (2017) Investigation into surface interaction between the contact lens, the upper eyelid and cornea using optical coherence tomography. In: Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XVII;. SPIE BIOS, 28 Jan - 02 Feb 2017, San Francisco, California, United States. SPIE . ISBN 978-1-5106-0558-9
Lewis, S.R., Lewis, R., Goodwin, P.S. et al. (3 more authors) (2015) Improving Rail Wear and RCF Performance using Laser Cladding. In: Proceedings of 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems. 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 30 Aug - 03 Sep 2015, Colorado, USA. CM2015 .
Beagles, A.E., Beaty, P., Fletcher, D.I. et al. (2 more authors) (2015) Insulated rail joint enhancement: testing and analysis. In: Institution of Mechanical Engineers. The Stephenson Conference: Research for Railways, 21 April 2015 - 23 April 2015, London, UK. Institution of Mechanical Engineers .
Dwyer-Joyce, R.S., Yao, C. and Lewis, R. (2008) Feasability study for an ultrasonic sensor for monitoring wheel flange contact. In: Proceedings of the IEEE/ASME/ASCE 2008 Joint Rail Conference. IEEE/ASME/ASCE 2008 Joint Rail Conference, April 22–24, 2008, Wilmington, Delaware, USA. ASME , pp. 119-124. ISBN 0-7918-4812-4
Quost, X., Tassini, N., Lewis, R. et al. (3 more authors) (2008) Predicting railway wheel wear starting from multi-body analysis: A preliminary study. In: Proccedings of the IEEE/ASME/ASCE 2008 Joint Rail Conference. IEEE/ASME/ASCE 2008 Joint Rail Conference, April 22–24, 2008, Wilmington, Delaware, USA. ASME , pp. 79-87.
Dwyer-Joyce, R.S., Yao, C., Lewis, R. et al. (2 more authors) (2008) A rail mounted ultrasonic sensor for contact patch measurement. In: Proccedings of the IEEE/ASME/ASCE 2008 Joint Rail Conference. IEEE/ASME/ASCE 2008 Joint Rail Conference, April 22–24, 2008, Wilmington, Delaware, USA. ASME , pp. 125-130.
Marshall, M.B., Lewis, R. and Dwyer-Joyce, R.S. (2005) The application of ultrasound as a tool for studying contact stresses in railway engineering component contacts. In: Proceedings of the 2005 ASME/IEEE Joint Rail Conference. ASME/IEEE 2005 Joint Rail Conference, March 16–18, 2005, Pueblo, Colorado, USA. ASME , pp. 83-88.
Lewis, R., Bruni, S., Ekberg, A. et al. (1 more author) (2005) A design tool for railway wheels incorporating damage models and dynamic simulations. In: Proceedings of the 2005 ASME/IEEE Joint Rail Conference. ASME/IEEE 2005 Joint Rail Conference, March 16–18, 2005, Pueblo, Colorado, USA. ASME , pp. 73-81.
Book
Anitha, S. orcid.org/0000-0002-6918-3680 and Lewis, R. (2018) Gender based violence in university communities: Policy, prevention and educational initiatives. Policy Press , Bristol . ISBN 9781447336587