Browse by Academic Unit (A-Z)

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators Name | Item Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | P | R | S | T | V | W | Z
Number of items at this level: 164.

A

Abdelgaied, A, Brockett, CL, Liu, F et al. (3 more authors) (2013) Quantification of the effect of cross-shear and applied nominal contact pressure on the wear of moderately cross-linked polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (1). 18 - 26. ISSN 0954-4119

Abdelgaied, A, Brockett, CL, Liu, F et al. (3 more authors) (2014) The effect of insert conformity and material on total knee replacement wear. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (1). 98 - 106. ISSN 0954-4119

Abdelgaied, A orcid.org/0000-0003-0066-1688, Fisher, J orcid.org/0000-0003-3833-3700 and Jennings, LM orcid.org/0000-0003-1446-4511 (2017) A comparison between electromechanical and pneumatic-controlled knee simulators for the investigation of wear of total knee replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Abdelgaied, A, Stanley, M, Galfe, M et al. (3 more authors) (2015) Comparison of the biomechanical tensile and compressive properties of decellularised and natural porcine meniscus. Journal of Biomechanics, 48 (8). 1389 - 1396. ISSN 0021-9290

Abouhossein, A orcid.org/0000-0001-8697-1593, Awad, MI, Crisp, C et al. (6 more authors) (2016) Effect of different prosthetic knees/feet on the roll-over shape. In: UNSPECIFIED, 17-20 Jul 2016, Orlando, Florida, USA. (In Press)

Abouhossein, A, Awad, MI orcid.org/0000-0002-0367-0187, Crisp, C et al. (6 more authors) (2017) Gait Abnormalities of Above Knee Amputees During Late Swing Phase, Is It a Design Deficiency or Compensatory Strategy? In: Ibáñez, J, González-Vargas, J, Azorín, JM, Akay, M and Pons, JL, (eds.) Converging Clinical and Engineering Research on Neurorehabilitation II: Proceedings of the 3rd International Conference on NeuroRehabilitation (ICNR2016), October 18-21, 2016, Segovia, Spain. Biosystems & Biorobotics (15). Springer International Publishing , Cham, Switzerland , pp. 279-283. ISBN 978-3-319-46668-2

Al-Hajjar, M orcid.org/0000-0001-5008-6138, Carbone, S, Jennings, LM orcid.org/0000-0003-1446-4511 et al. (4 more authors) (2016) Wear of composite ceramics in mixed-material combinations in total hip replacement under adverse edge loading conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials. ISSN 1552-4973

Al-Hajjar, M, Fisher, J, Tipper, JL et al. (2 more authors) (2013) Wear of 36-mm BIOLOX(R) delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions. Proceedings of the Institution of Mechanical Engineers Part H: Journal of Engineering in Medicine, 227 (5). 535 - 542. ISSN 0954-4119

Al-Hajjar, M, Fisher, J, Williams, S et al. (2 more authors) (2013) Effect of femoral head size on the wear of metal on metal bearings in total hip replacements under adverse edge loading conditions. Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 101B (2). 213 - 222. ISSN 1552-4973

Al-Hajjar, M, Jennings, LM, Begand, S et al. (3 more authors) (2013) Wear of novel ceramic-on-ceramic bearings under adverse and clinically relevant hip simulator conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101 (8). 1456 - 1462. ISSN 0021-9304

Ali, M, Al-Hajjar, M orcid.org/0000-0001-5008-6138 and Jennings, LM orcid.org/0000-0003-1446-4511 (2015) Tribology of UHMWPE in the Hip. In: UHMWPE Biomaterials Handbook. Elsevier , pp. 579-595. ISBN 9780323354011

Ali, M, Al-Hajjar, M orcid.org/0000-0001-5008-6138, Partridge, S et al. (3 more authors) (2016) Influence of hip joint simulator design and mechanics on the wear and creep of metal-on-polyethylene bearings. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 389-397. ISSN 0954-4119

Alshryda, S, Mason, J, Sarda, P et al. (4 more authors) (2014) The effect of tranexamic acid on artificial joint materials: a biomechanical study (the bioTRANX study). Journal of Orthopaedics and Traumatology. 1 - 8. ISSN 1590-9921

Ardestani, MM, Chen, Z, Wang, L et al. (5 more authors) (2014) A neural network approach for determining gait modifications to reduce the contact force in knee joint implant. Medical Engineering and Physics, 36 (10). pp. 1253-1265. ISSN 1350-4533

Ardestani, MM, Moazen, M, Chen, Z et al. (2 more authors) (2015) A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitation. Neurocomputing, 154. 174 - 188. ISSN 0925-2312

Ardestani, MM, Moazen, M and Jin, Z (2015) Contribution of geometric design parameters to knee implant performance: Conflicting impact of conformity on kinematics and contact mechanics. Knee, 22 (3). pp. 217-224. ISSN 0968-0160

Ardestani, MM, Moazen, M and Jin, Z (2014) Gait modification and optimization using neural network-genetic algorithm approach: Application to knee rehabilitation. Expert Systems with Applications, 41 (16). pp. 7466-7477. ISSN 0957-4174

Ardestani, MM, Moazen, M and Jin, Z (2015) Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics. Medical Engineering and Physics, 37 (2). pp. 165-174. ISSN 1350-4533

Ardestani, MM, Moazen, M, Maniei, E et al. (1 more author) (2015) Posterior stabilized versus cruciate retaining total knee arthroplasty designs: Conformity affects the performance reliability of the design over the patient population. Medical Engineering and Physics, 37 (4). pp. 350-360. ISSN 1350-4533

Ardestani, MM, Zhang, X, Wang, L et al. (5 more authors) (2014) Human lower extremity joint moment prediction: A wavelet neural network approach. Expert Systems with Applications, 41 (9). pp. 4422-4433. ISSN 0957-4174

B

Behl, B, Papageorgiou, I, Brown, C et al. (4 more authors) (2013) Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells. Biomaterials, 34 (14). 3547 - 3558. ISSN 0142-9612

Bladen, CL, Teramura, S, Russell, SL et al. (5 more authors) (2013) Analysis of wear, wear particles, and reduced inflammatory potential of vitamin E ultrahigh-molecular-weight polyethylene for use in total joint replacement. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B (3). 458 - 466. ISSN 1552-4973

Bladen, CL, Tzu-Yin, L, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2013) In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B (3). pp. 407-413. ISSN 1552-4981

Bodkin, T, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2017) Towards Additive Manufacture of Next Generation Prosthetics, Assessing Emerging CAD Strategies for Improving the Existing CAD Process. International Journal of Rapid Manufacturing, 6 (2/3). pp. 185-196. ISSN 1757-8817

Bournias-Varotsis, A, Harris, RA orcid.org/0000-0002-3425-7969 and Friel, RJ (2015) The Effect of Ultrasonic Excitation on the Electrical Properties and Microstructure of Printed Electronic Conductive Inks. In: Proceedings. 2015 38th International Spring Seminar on Electronics Technology (ISSE), 06-10 May 2015, Eger, Hungary. IEEE , pp. 140-145. ISBN 978-1-4799-8860-0

Bowes, MA, McLure, SWD, Wolstenholme, CBH et al. (4 more authors) (2016) Osteoarthritic bone marrow lesions almost exclusively colocate with denuded cartilage: a 3D study using data from the Osteoarthritis Initiative. Annals of the Rheumatic Diseases, 75 (10). pp. 1852-1857. ISSN 0003-4967

Bowland, P, Ingham, E, Jennings, LM et al. (1 more author) (2015) Review of the biomechanics and biotribology of osteochondral grafts used for surgical interventions in the knee. Proceedings of the Institution of Mechanical Engineers, 229 (12). 879 - 888. ISSN 0954-4119

Brockett, C orcid.org/0000-0002-6664-7259, Abdelgaied, A, Haythornthwaite, T et al. (3 more authors) (2016) The influence of simulator input conditions on the wear of total knee replacements: An experimental and computational study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (5). pp. 429-439. ISSN 0954-4119

Brockett, CL orcid.org/0000-0002-6664-7259, Carbone, S, Abdelgaied, A et al. (2 more authors) (2016) Influence of contact pressure, cross-shear and counterface material on the wear of PEEK and CFR-PEEK for orthopaedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 63. pp. 10-16. ISSN 1751-6161

Brockett, CL orcid.org/0000-0002-6664-7259, Carbone, S, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2017) PEEK and CFR-PEEK as alternative bearing materials to UHMWPE in a fixed bearing total knee replacement: An experimental wear study. Wear, 374-37. pp. 86-91. ISSN 0043-1648

Brockett, CL orcid.org/0000-0002-6664-7259 and Chapman, GJ orcid.org/0000-0003-3983-6641 (2016) Biomechanics of the Ankle. Orthopaedics and Trauma, 30 (3). pp. 232-238. ISSN 1877-1327

Brockett, CL, Harper, P, Williams, S et al. (4 more authors) (2008) The influence of clearance on friction, lubrication and squeaking in large diameter metal-on-metal hip replacements. Journal of Materials Science: Materials in Medicine, 19 (4). 1575 - 1579. ISSN 0957-4530

Brockett, CL orcid.org/0000-0002-6664-7259, Jennings, LM and Fisher, J (2012) Wear of knee prostheses. Orthopedic Research and Reviews, 4. pp. 19-26. ISSN 1179-1462

Brockett, CL, Williams, S, Jin, Z et al. (2 more authors) (2013) Squeaking Hip Arthroplasties: A Tribological Phenomenon. Journal of Arthroplasty, 28 (1). pp. 90-97. ISSN 0883-5403

Burton, A, Williams, S, Brockett, CL orcid.org/0000-0002-6664-7259 et al. (1 more author) (2012) In Vitro Comparison of Fixed- and Mobile Meniscal-Bearing Unicondylar Knee Arthroplasties. Journal of Arthroplasty, 27 (8). pp. 1452-1459. ISSN 0883-5403

C

Capel, AJ, Wright, A, Harding, MJ et al. (6 more authors) (2017) 3D printed fluidics with embedded analytic functionality for automated reaction optimisation. Beilstein Journal of Organic Chemistry, 13. pp. 111-119. ISSN 1860-5397

Carey, D, Wijayathunga, VN, Bulpitt, AJ et al. (1 more author) (2015) A Novel Approach for the Colour Deconvolution of Multiple Histological Stains. In: Lambrou, T and Ye, X, (eds.) Proceedings of the 19th Conference of Medical Image Understanding and Analysis. Medical Image Understanding and Analysis, 15-17 Jul 2015, Lincoln, UK. BMVA , 156 - 162. ISBN 1-901725-54-5

Chen, Z and Jin, Z (2016) Prediction of in-vivo kinematics and contact track of total knee arthroplasty during walking. Biosurface and Biotribology, 2 (3). pp. 86-94. ISSN 2405-4518

Chen, Z, Wang, L, Liu, Y et al. (4 more authors) (2015) Effect of Component Mal-Rotation on Knee Loading in Total Knee Arthroplasty Using Multi-Body Dynamics Modeling Under a Simulated Walking Gait. Journal of Orthopaedic Research, 33 (9). pp. 1287-1296. ISSN 0736-0266

Cooper, RJ, Mengoni, M orcid.org/0000-0003-0986-2769, Groves, D et al. (4 more authors) (2017) Three-dimensional assessment of impingement risk in geometrically parameterised hips compared with clinical measures. International Journal for Numerical Methods in Biomedical Engineering. ISSN 2040-7939

Cowie, RM orcid.org/0000-0003-3903-5916, Briscoe, A, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2016) PEEK-OPTIMA as an alternative to cobalt chrome in the femoral component of total knee replacement: A preliminary study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (11). pp. 1008-1015. ISSN 0954-4119

Cowie, RM orcid.org/0000-0003-3903-5916, Carbone, S, Aiken, S et al. (2 more authors) (2016) Influence of third-body particles originating from bone void fillers on the wear of ultra-high-molecular-weight polyethylene. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (8). pp. 775-783. ISSN 0954-4119

D

Dahabreh, Z, Phillips, HK, Stewart, T et al. (1 more author) (2014) The effect of application time of two types of bone cement on the cement-bone interface strength. European Journal of Orthopaedic Surgery & Traumatology. ISSN 1633-8065

Damion, RA, Pawaskar, SS, Ries, ME et al. (4 more authors) (2012) Spin-lattice relaxation rates and water content of freeze-dried articular cartilage. Osteoarthritis Cartilage, 20 (2). 184 - 190. ISSN 1063-4584

E

Edwards, JH, Herbert, A, Jones, GL et al. (3 more authors) (2016) The effects of irradiation on the biological and biomechanical properties of an acellular porcine superflexor tendon graft for cruciate ligament repair. Journal of Biomedical Materials Research Part B: Applied Biomaterials. ISSN 1552-4973

Elson, KM, Fox, N, Tipper, JL et al. (4 more authors) (2015) Non-destructive monitoring of viability in an ex vivo organ culture model of osteochondral tissue. eCells and Materials Journal, 29. 356 - 369. ISSN 1473-2262

F

Fermor, HL, McLure, SWD, Taylor, SD et al. (4 more authors) (2015) Biological, biochemical and biomechanical characterisation of articular cartilage from the porcine, bovine and ovine hip and knee. Bio-Medical Materials and Engineering, 25 (4). 381 - 395. ISSN 0959-2989

Fermor, HL, Russell, SL, Williams, S et al. (2 more authors) (2015) Development and characterisation of a decellularised bovine osteochondral biomaterial for cartilage repair. Journal of Materials Science: Materials in Medicine, 26 (5). 5517 - ?. ISSN 0957-4530

Fisher, J (2013) Regeneration Man. EPSRC Pioneer Magazine, 11 (Winter). 32 - 35 (4).

GB 2507850 A (2013) Bone Meniscus Bone Title of the Invention: Composite Bone Implants Abstract Title: A decelluralised implant material. .

Fox, N, Stanley, M, Thomas, D orcid.org/0000-0001-5584-9114 et al. (2 more authors) (2016) Development of an Ex-Vivo Organ Culture Model of the Femoral-Tibial Joint. In: Orthopaedic Research Society 2015 Annual Meeting. Orthopaedic Research Society 2015 Annual Meeting, 28-31 Mar 2015, Las Vegas, Nevada. . (Unpublished)

G

Gao, Y, Chai, W, Wang, L et al. (2 more authors) (2016) Effect of friction and clearance on kinematics and contact mechanics of dual mobility hip implant. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of Engineering in Medicine, 230 (1). pp. 39-49. ISSN 0954-4119

Gao, Y, Jin, Z, Wang, L et al. (1 more author) (2015) Finite element analysis of sliding distance and contact mechanics of hip implant under dynamic walking conditions. Proceedings of the Institution of Mechanical Engineers Part H - Journal of Engineering in Medicine, 229 (6). 469 - 474. ISSN 0954-4119

Goulas, A, Binner, JGP, Harris, RA orcid.org/0000-0002-3425-7969 et al. (1 more author) (2017) Assessing extraterrestrial regolith material simulants for in-situ resource utilization based 3D printing. Applied Materials Today, 6. pp. 54-61. ISSN 2352-9407

Goulas, A, Harris, RA orcid.org/0000-0002-3425-7969 and Friel, RJ (2016) Additive manufacturing of physical assets by using ceramic multicomponent extra-terrestrial materials. Additive Manufacturing, 10. pp. 36-42.

Graham, SM, Mak, JH, Moazen, M et al. (4 more authors) (2015) Periprosthetic femoral fracture fixation: A biomechanical comparison between proximal locking screws and cables. Journal of Orthopaedic Science, 20 (5). pp. 875-880. ISSN 0949-2658

H

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2016) Artificial Vascular Bifurcations – Design and Modelling. In: Bártolo, P, (ed.) Procedia CIRP. The Second CIRP Conference on Biomanufacturing, 29-31 Jul 2015, Manchester Conference Centre, UK. Elsevier , pp. 14-18.

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2015) Design of bifurcation junctions in artificial vascular vessels additively manufactured for skin tissue engineering. Journal of Visual Languages & Computing, 28. pp. 238-249. ISSN 1045-926X

Han, X, Bibb, R and Harris, R orcid.org/0000-0002-3425-7969 (2016) Engineering design of artificial vascular junctions for 3D printing. Biofabrication, 8 (2). 025018. ISSN 1758-5082

Harwood, PJ and Stewart, TD (2016) Mechanics of musculoskeletal repair devices. Orthopaedics and Trauma, 30 (3). pp. 192-200. ISSN 1877-1327

Hasan, J, Fisher, J and Ingham, E (2014) Current strategies in meniscal regeneration. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 102 (3). 619 - 634. ISSN 1552-4973

Henderson, DJ, Rushbrook, JL, Harwood, PJ et al. (1 more author) (2017) What Are the Biomechanical Properties of the Taylor Spatial Frame™? Clinical Orthopaedics and Related Research®, 475 (5). pp. 1472-1482. ISSN 0009-921X

Henderson, DJ, Rushbrook, JL, Stewart, TD et al. (1 more author) (2016) What Are the Biomechanical Effects of Half-pin and Fine-wire Configurations on Fracture Site Movement in Circular Frames? Clinical Orthopaedics and Related Research, 474 (1). pp. 1041-1049. ISSN 0009-921X

Herbert, A, Brown, C, Rooney, P et al. (3 more authors) (2016) Bi-linear mechanical property determination of acellular human patellar tendon grafts for use in anterior cruciate ligament replacement. Journal of Biomechanics, 49 (9). pp. 1607-1612. ISSN 0021-9290

Herbert, A orcid.org/0000-0002-6527-2205, Edwards, JH, Jones, GL et al. (2 more authors) (2017) The effects of irradiation dose and storage time following treatment on the viscoelastic properties of decellularised porcine super flexor tendon. Journal of Biomechanics, 57. pp. 157-160. ISSN 0021-9290

Herbert, A, Jones, GL, Ingham, E et al. (1 more author) (2014) A biomechanical characterisation of acellular porcine super flexor tendons for use in anterior cruciate ligament replacement: Investigation into the effects of fat reduction and bioburden reduction bioprocesses. Journal of biomechanics, 48 (1). 22 - 29. ISSN 0021-9290

Holub, O, Lopez, A, Borse, V et al. (4 more authors) (2015) Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study. Journal of Biomechanics, 48 (12). pp. 3258-3266. ISSN 0021-9290

Hua, X, Li, J, Jin, Z et al. (1 more author) (2016) Erratum: Corrigendum to “The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities.” (Medical Engineering & Physics (2016) 38(6) (518–525)). Medical Engineering and Physics, 38 (8). p. 826. ISSN 1350-4533

Hua, X, Li, J, Jin, Z et al. (1 more author) (2016) The contact mechanics and occurrence of edge loading in modular metal-on-polyethylene total hip replacement during daily activities. Medical Engineering and Physics, 38 (6). pp. 518-525. ISSN 1350-4533

Hua, X, Li, J, Wang, L et al. (3 more authors) (2014) Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions. Journal of Biomechanics, 47 (13). 3303 - 3309. ISSN 0021-9290

Hua, X, Li, J, Wang, L et al. (3 more authors) (2015) The effect of cup outer sizes on the contact mechanics and cement fixation of cemented total hip replacements. MEDICAL ENGINEERING & PHYSICS, 37 (10). pp. 1008-1014. ISSN 1350-4533

Hua, X, Li, J, Wilcox, RK et al. (2 more authors) (2015) Geometric parameterisation of pelvic bone and cartilage in contact analysis of the natural hip: An initial study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (8). pp. 570-580. ISSN 0954-4119

Hua, X, Wang, L, Al-Hajjar, M et al. (3 more authors) (2014) Experimental validation of finite element modelling of a modular metal-on-polyethylene total hip replacement. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (7). 682 - 692. ISSN 0954-4119

Hua, X, Wroblewski, BM, Jin, Z et al. (1 more author) (2012) The effect of cup inclination and wear on the contact mechanics and cement fixation for ultra high molecular weight polyethylene total hip replacements. Medical Engineering and Physics, 34 (3). 318 - 325. ISSN 1350-4533

Hyde, PJ, Fisher, J orcid.org/0000-0003-3833-3700 and Hall, RM (2017) Wear characteristics of an unconstrained lumbar total disc replacement under a range of in vitro test conditions. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 105 (1). pp. 46-52. ISSN 1552-4973

Hyde, PJ, Tipper, JL, Fisher, J et al. (1 more author) (2015) Wear and biological effects of a semi-constrained total disc replacement subject to modified ISO standard test conditions. Journal of the Mechanical Behavior of Biomedical Materials, 44. pp. 43-52. ISSN 1751-6161

J

Jennings, LM, Al-Hajjar, M, Brockett, CL et al. (4 more authors) (2012) (iv) Enhancing the safety and reliability of joint replacement implants. Orthopaedics and Trauma, 26 (4). 246 - 252. ISSN 1877-1327

Jin, ZM, Zheng, J, Li, W et al. (1 more author) (2016) Tribology of Medical Devices. Biosurface and Biotribology, 2 (4). pp. 173-192. ISSN 2405-4518

Joda, A, Jin, Z, Haverich, A et al. (2 more authors) (2016) Multiphysics simulation of the effect of leaflet thickness inhomogeneity and material anisotropy on the stress-strain distribution on the aortic valve. Journal of Biomechanics, 49 (12). pp. 2502-2512. ISSN 0021-9290

Jones, G, Herbert, A orcid.org/0000-0002-6527-2205, Berry, H orcid.org/0000-0003-2426-1881 et al. (3 more authors) (2017) Decellularisation and characterisation of porcine superflexor tendon: a potential anterior cruciate ligament replacement. Tissue Engineering: Parts A, B, and C, 23 (3-4). pp. 124-134. ISSN 1937-3368

K

Kapadia, D, Racasan, R, Pagani, L et al. (2 more authors) (2017) Method for volumetric assessment of edge-wear in ceramic-on-ceramic acetabular liners. Wear, 376–37 (Part A). pp. 236-242. ISSN 0043-1648

Kay, RW, Cummins, G, Krebs, T et al. (3 more authors) (2014) Statistical analysis of stencil technology for wafer-level bumping. Soldering & Surface Mount Technology, 26 (2). pp. 71-78. ISSN 0954-0911

L

Laurent, C, Bohme, B, Mengoni, M et al. (3 more authors) (2016) Prediction of the mechanical response of canine humerus to three-point bending using subject-specific finite element modelling. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (7). pp. 639-649. ISSN 0954-4119

Leng, J, Al-Hajjar, M, Wilcox, R et al. (3 more authors) (2017) Dynamic virtual simulation of the occurrence and severity of edge loading in hip replacements associated with variation in the rotational and translational surgical position. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (4). pp. 299-306. ISSN 0954-4119

Li, J, Hua, X, Jin, Z et al. (2 more authors) (2014) Biphasic investigation of contact mechanics in natural human hips during activities. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (6). 556 - 563. ISSN 2041-3033

Li, J, Hua, X, Jin, Z et al. (2 more authors) (2014) Influence of clearance on the time-dependent performance of the hip following hemiarthroplasty: A finite element study with biphasic acetabular cartilage properties. Medical Engineering and Physics, 36 (11). 1449 - 1454. ISSN 1350-4533

Li, J, Hua, X, Jones, AC orcid.org/0000-0002-4984-7507 et al. (4 more authors) (2016) The influence of the representation of collagen fibre organisation on the cartilage contact mechanics of the hip joint. Journal of Biomechanics, 49 (9). pp. 1679-1685. ISSN 0021-9290

Li, J, McWilliams, AB, Jin, Z et al. (4 more authors) (2015) Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking. Clinical Biomechanics, 30 (5). 513 - 519. ISSN 0268-0033

Li, J, Monaghan, T, Masurtschak, S et al. (3 more authors) (2015) Exploring the mechanical strength of additively manufactured metal structures with embedded electrical materials. Materials Science and Engineering: A, 639. pp. 474-481. ISSN 0921-5093

Li, J, Monaghan, T, Nguyen, TT et al. (3 more authors) (2017) Multifunctional metal matrix composites with embedded printed electrical materials fabricated by Ultrasonic Additive Manufacturing. Composites Part B: Engineering, 113. pp. 342-354. ISSN 1359-8368

Li, J, Redmond, AC, Jin, Z et al. (3 more authors) (2014) Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing. Clinical Biomechanics, 29 (7). 747 - 751. ISSN 0268-0033

Li, J, Stewart, TD, Jin, Z et al. (2 more authors) (2013) The influence of size, clearance, cartilage properties, thickness and hemiarthroplasty on the contact mechanics of the hip joint with biphasic layers. Journal of Biomechanics, 46 (10). 1641 - 1647. ISSN 0021-9290

Li, J, Wang, Q, Jin, Z et al. (3 more authors) (2014) Experimental validation of a new biphasic model of the contact mechanics of the porcine hip. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (6). 547 - 555. ISSN 0954-4119

Li, J, Wasley, T, Nguyen, TT et al. (7 more authors) (2016) Hybrid additive manufacturing of 3D electronic systems. Journal of Micromechanics and Microengineering, 26 (10). 105005. ISSN 0960-1317

Liu, A, Jennings, LM, Ingham, E et al. (1 more author) (2015) Tribology studies of the natural knee using an animal model in a new whole joint natural knee simulator. Journal of Biomechanics, 48 (12). 3004 - 3011. ISSN 0021-9290

Liu, A, Richards, L, Bladen, CL et al. (3 more authors) (2015) The Biological Response to Nanometre-sized Polymer Particles. Acta Biomaterialia, 23. pp. 38-51. ISSN 1742-7061

Liu, F and Fisher, J orcid.org/0000-0003-3833-3700 (2017) Effect of an edge at cup rim on contact stress during micro-separation in ceramic-on-ceramic hip joints. Tribology International, 113. pp. 323-329. ISSN 0301-679X

Liu, F, Williams, S and Fisher, J (2014) Effect of microseparation on contact mechanics in metal-on-metal hip replacements-A finite element analysis. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 103 (6). 1312 - 1319. ISSN 1552-4973

Luo, J, Ingham, E, Fisher, J et al. (2 more authors) (2014) The development of an acellular porcine carotid artery. In: Journal of Tissue Engineering and Regenerative Medicine. Tissue Engineering & Regenerative Medicine International Society, European Chapter Meeting, 10–13 June, 2014, Genova, Italy. Wiley , 335 - 336.

Luo, J, Korossis, SA, Wilshaw, SP et al. (3 more authors) (2014) Development and characterization of acellular porcine pulmonary valve scaffolds for tissue engineering. Tissue engineering. Part A. ISSN 1937-3341

M

Ma'touq, J, Strauss, DN, Messenger, N et al. (2 more authors) (2014) Spinal angle and foot pressure during cardiac electrophysiological procedures. International Journal of Cardiology, 172 (3). 398 - 400. ISSN 0167-5273

Magee, DR, Song, Y, Gilbert, S et al. (5 more authors) (2015) Histopathology in 3D: from three-dimensional reconstruction to multi-stain and multi-modal analysis. Journal of Pathology Informatics, 6 (6). ISSN 2229-5089

Maiti, R, Cowie, RM orcid.org/0000-0003-3903-5916, Fisher, J orcid.org/0000-0003-3833-3700 et al. (1 more author) (2017) The influence of malalignment and ageing following sterilisation by gamma irradiation in an inert atmosphere on the wear of ultra-high-molecular-weight polyethylene in patellofemoral replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. ISSN 0954-4119

Maiti, R, Fisher, J, Rowley, LR et al. (1 more author) (2014) The influence of kinematic conditions and design on the wear of patella-femoral replacements. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 228 (2). 175 - 181. ISSN 0954-4119

McWilliams, A, Stewart, TD, Grainger, AJ et al. (4 more authors) (2017) Corrigendum to “Leg length inequality following total hip replacement” [Orthopaed Trauma 25 (2011) 37–42]. Orthopaedics and Trauma, 31 (1). p. 57. ISSN 1877-1327

McWilliams, AB, Douglas, SL, Redmond, AC et al. (4 more authors) (2013) Litigation after hip and knee replacement in the national health service. Bone and Joint Journal, 95-B (1). 122 - 126. ISSN 2049-4394

McWilliams, AB, Grainger, AJ, O'Connor, PJ et al. (3 more authors) (2013) A review of symptomatic leg length inequality following total hip arthroplasty. HIP International, 23 (1). 6 - 14. ISSN 1120-7000

Meng, Q orcid.org/0000-0002-6708-5585, An, S, Damion, RA et al. (4 more authors) (2017) The Effect of Collagen Fibril Orientation on the Biphasic Mechanics of Articular Cartilage. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 439-453. ISSN 1751-6161

Meng, Q, Gao, L, Liu, F et al. (3 more authors) (2010) Contact mechanics and elastohydrodynamic lubrication in a novel metal-on-metal hip implant with an aspherical bearing surface. Journal of Biomechanics, 43 (5). 849 - 857.

Meng, Q, Jin, Z, Fisher, J et al. (1 more author) (2013) Comparison between FEBio and Abaqus for biphasic contact problems. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (9). 1009 - 1019. ISSN 0954-4119

Meng, Q, Liu, F, Fisher, J et al. (1 more author) (2013) Effect of simplifications of bone and components inclination on the elastohydrodynamic lubrication modeling of metal-on-metal hip resurfacing prosthesis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (5). 523 - 534. ISSN 0954-4119

Meng, Q, Wang, J, Yang, P et al. (2 more authors) (2015) The lubrication performance of the ceramic-on-ceramic hip implant under starved conditions. Journal of The Mechanical Behavior of Biomedical Materials, 50. 70 - 76. ISSN 1751-6161

Meng, QE, Liu, F, Fisher, J et al. (1 more author) (2011) Transient elastohydrodynamic lubrication analysis of a novel metal-on-metal hip prosthesis with a non-spherical femoral bearing surface. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 225 (1). 25 - 37. ISSN 0954-4119

Mengoni, M (2015) 2DImage2Mesh, a Python code to generate quadrangular meshes on images. UNSPECIFIED.

Mengoni, M (2015) opti4Abq, a generic Python code to run Abaqus in an optimisation loop. UNSPECIFIED.

Mengoni, M orcid.org/0000-0003-0986-2769, Brockett, CL, Zapata, FY et al. (3 more authors) (2014) On presenting aspects of computational biomechanics to the non-specialists. In: MEC Annual Meeting and Bioengineering 14, 10-11 Sep 2014, London.

Mengoni, M, Jones, AC, Wijayathunga, VN et al. (1 more author) (2015) Modelling the failure mechanism of the annulus fibrosus. In: European Spine Journal. EUROSPINE 2015, 02-04 Sep 2015, Copenhagen, Denmark. Springer Berlin Heidelberg , p. 711.

Mengoni, M orcid.org/0000-0003-0986-2769, Jones, AC orcid.org/0000-0002-4984-7507 and Wilcox, RK (2016) Modelling the failure precursor mechanism of lamellar fibrous tissues, example of the annulus fibrosus. Journal of the Mechanical Behavior of Biomedical Materials, 63. pp. 265-272. ISSN 1751-6161

Mengoni, M, Luxmoore, BJ, Jones, AC et al. (3 more authors) (2014) A cohesive interface approach to model the inter-lamellar behaviour of the intervertebral disc annulus fibrosus. In: Proceedings of 7th World Congress of Biomechanics and the 20th Congress of The European Society of Biomechanics. The World Congress of Biomechanics , 6 - 11 July 2014, Boston, USA. . (Unpublished)

Mengoni, M, Luxmoore, BJ, Wijayathunga, VN et al. (3 more authors) (2015) Derivation of inter-lamellar behaviour of the intervertebral disc annulus. Journal of the Mechanical Behavior of Biomedical Materials, 48. 164 - 172. ISSN 1751-6161

Mengoni, M, Luxmoore, BJ, Wijayathunga, VN et al. (2 more authors) (2014) On the effect of the inter-lamellar behaviour in a finite element model of the annulus fibrosus. In: 12th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, 13-15 Oct 2014 , Amsterdam, The Netherlands.

Mengoni, M and Ponthot, JP (2015) An enhanced version of a bone-remodelling model based on the continuum damage mechanics theory. Computer Methods in Biomechanics and Biomedical Engineering, 18 (12). 1367 - 1376. ISSN 1025-5842

Mengoni, M and Ponthot, JP (2015) A generic anisotropic continuum damage model integration scheme adaptable to both ductile damage and biological damage-like situations. International Journal of Plasticity, 66. pp. 46-70. ISSN 0749-6419

Mengoni, M, Ponthot, JP and Boman, R (2016) Mesh management methods in finite element simulations of orthodontic tooth movement. Medical Engineering and Physics, 38 (2). pp. 140-147. ISSN 1350-4533

Mengoni, M, Sikora, SN, d'Otreppe, V et al. (2 more authors) (2015) In-silico models of trabecular bone: a sensitivity analysis perspective. In: Geris, L and Gomez-Cabrero, D, (eds.) Uncertainty in Biology: a computational modelling approach. Studies in Mechanobiology, Tissue Engineering and Biomaterials, 17 . Springer , pp. 393-423. ISBN 978-3-319-21295-1

Mengoni, M orcid.org/0000-0003-0986-2769, Vasiljeva, K, Jones, AC orcid.org/0000-0002-4984-7507 et al. (2 more authors) (2016) Subject-specific multi-validation of a Finite Element model of ovine cervical functional spinal units. Journal of Biomechanics, 49 (2). pp. 259-266. ISSN 0021-9290

Mengoni, M, Wijayathunga, VN, Jones, AC et al. (1 more author) (2014) On the inter-lamellar behaviour effect in a finite element model of the annulus fibrosus. In: Young Researchers Futures Meeting -Engineering for orthopaedic applications, 15-17 Sep 2014, Leeds, United Kingdom. (Unpublished)

Mengoni, M, Wijayathunga, VN, Jones, AC et al. (1 more author) (2013) Structural modelling of the annulus fibrosus - an anisotropic hyperelastic model approach at the lamellar level. In: Nithiarasu, P and Löhner, R, (eds.) 3rd International Conference on Mathematical and Computational Biomedical Engineering. 3rd International Conference on Computational & Mathematical Biomedical Engineering, 16-18 December 2013, City University of Hong-Kong, Tat Chee Avenue. . ISBN 978-0-9562914-2-4

Miles, DE, Mitchell, EA, Kapur, N orcid.org/0000-0003-1041-8390 et al. (2 more authors) (2016) Peptide: Glycosamineglycan hybrid hydrogels as an injectable intervention for spinal disc degeneration. Journal of Materials Chemistry B, 4 (19). pp. 3225-3231. ISSN 2050-750X

Moazen, M, Mak, JH, Etchels, LW et al. (4 more authors) (2014) Periprosthetic femoral fracture - a biomechanical comparison between vancouver type B1 and B2 fixation methods. Journal of Arthroplasty, 29 (3). 495 - 500. ISSN 0883-5403

Moazen, M, Mak, JH, Etchels, LW et al. (4 more authors) (2013) The effect of fracture stability on the performance of locking plate fixation in periprosthetic femoral fractures. Journal of Arthroplasty, 28 (9). 1589 - 1595. ISSN 0883-5403

Moazen, M, Mak, JH, Jones, AC et al. (3 more authors) (2013) Evaluation of a new approach for modelling the screw-bone interface in a locking plate fixation: A corroboration study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 227 (7). 746 - 756. ISSN 0954-4119

Monaghan, T, Capel, AJ, Christie, SD et al. (2 more authors) (2015) Solid-state additive manufacturing for metallized optical fiber integration. Composites Part A: Applied Science and Manufacturing, 76. pp. 181-193. ISSN 1359-835X

Monaghan, T, Harding, MJ, Harris, RA orcid.org/0000-0002-3425-7969 et al. (2 more authors) (2016) Customisable 3D printed microfluidics for integrated analysis and optimisation. Lab on a Chip, 16 (17). pp. 3362-3373. ISSN 1473-0197

N

Nogiwa-Valdez, AA, Rainforth, WM and Stewart, TD (2014) Wear and degradation on retrieved zirconia femoral heads. Journal of the Mechanical Behavior of Biomedical Materials, 31. 145 - 151. ISSN 1751-6161

P

Paniagua Gutierrez, JR, Berry, H, Korossis, S et al. (7 more authors) (2015) Regenerative potential of low-concentration SDS-decellularized porcine aortic valved conduits in vivo. Tissue Engineering: Parts A, B, and C, 21 (1-2). pp. 332-342. ISSN 1937-3368

Papageorgiou, I, Abberton, T, Fuller, M et al. (3 more authors) (2014) Biological Effects of Clinically Relevant CoCr Nanoparticles in the Dura Mater: An Organ Culture Study. Nanomaterials, 4 (2). 485 - 504. ISSN 2079-4991

Papageorgiou, I, Marsh, R, Tipper, JL et al. (3 more authors) (2014) Interaction of micron and nano-sized particles with cells of the dura mater. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 102 (7). 1496 - 1505. ISSN 1552-4973

Pennington, N, Redmond, A, Stewart, T et al. (1 more author) (2014) The impact of surgeon handedness in total hip replacement. Annals of the Royal College of Surgeons of England, 96 (6). 437 - 441 (5). ISSN 0035-8843

Preutenborbeck, M, Holub, O, Freeman, E et al. (3 more authors) (2016) Assessment of the fracture risk of proximal porcine femurs with simulated lesions using a fracture prediction method based on beam theory. In: Journal of Orthopaedic Translation. 2016 International Combined Meeting of Orthopaedic Research Societies, 21-25 Sep 2016, Xian, China. Elsevier , pp. 83-84.

R

Riches, K, Angelini, TG, Mudhar, GS et al. (8 more authors) (2013) Exploring smooth muscle phenotype and function in a bioreactor model of abdominal aortic aneurysm. Journal of Translational Medicine, 11 (1). 208. ISSN 1479-5876

Rivera-Gonzalez, GC, Droop, AP, Rippon, HJ et al. (4 more authors) (2012) Retinoic acid and androgen receptors combine to achieve tissue specific control of human prostatic transglutaminase expression: a novel regulatory network with broader significance. Nucleic Acids Research, 40 (11). pp. 4825-4840. ISSN 0305-1048

Robson Brown, K, Tarsuslugil, S, Wijayathunga, VN et al. (1 more author) (2014) Comparative finite-element analysis: a single computational modelling method can estimate the mechanical properties of porcine and human vertebrae. Journal of the Royal Society Interface, 11 (95). 20140186. ISSN 1742-5689

S

Smyth, A, Fisher, J orcid.org/0000-0003-3833-3700, Suner, S et al. (1 more author) (2017) Influence of Kinematics on the Wear of a Total Ankle Replacement. Journal of Biomechanics, 53. pp. 105-110. ISSN 0021-9290

Song, Y, Treanor, D, Bulpitt, AJ et al. (4 more authors) (2014) Unsupervised content classification based non-rigid registration of differently stained histology images. IEEE Transactions on Biomedical Engineering, 61 (1). ISSN 0018-9294

Stewart, TD, Whitwell, G and Pai, SK, (2013) Long-term results of a total knee prosthesis utilising an all polyethylene tibial component. Archives of Orthopaedic and Trauma Surgery, 133 (8). 1143 - 1148. ISSN 0936-8051

Stratton-Powell, AA, Pasko, KM, Brockett, CL orcid.org/0000-0002-6664-7259 et al. (1 more author) (2016) The Biologic Response to Polyetheretherketone (PEEK) Wear Particles in Total Joint Replacement: A Systematic Review. Clinical Orthopaedics and Related Research, 474 (11). pp. 2394-2404. ISSN 0009-921X

Sun, C, Wang, L, Wang, Z et al. (4 more authors) (2015) Finite Element Analysis of A Retrieved Custom-Made Knee Prosthesis. Journal of Mechanics in Medicine and Biology, 15 (3). 1550020. pp. 1550020-1550034. ISSN 0219-5194

T

Ta, DV, Dunn, A, Wasley, TJ et al. (5 more authors) (2015) Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications. Applied Surface Science, 357. pp. 248-254. ISSN 0169-4332

Ta, VD, Carter, RM, Esenturk, E et al. (7 more authors) (2016) Dynamically controlled deposition of colloidal nanoparticles suspension in evaporating drops using laser radiation. Soft Matter, 12 (20). pp. 4530-4536. ISSN 1744-683X

Ta, VD, Dunn, A, Wasley, TJ et al. (7 more authors) (2016) Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition. Applied Surface Science, 365. pp. 153-159. ISSN 0169-4332

Ta, VD, Dunn, A, Wasley, TJ et al. (7 more authors) (2016) Laser textured surface gradients. Applied Surface Science, 371. pp. 583-589. ISSN 0169-4332

Tarsuslugil, SM, O'Hara, RM, Dunne, NJ et al. (4 more authors) (2014) Experimental and computational approach investigating burst fracture augmentation using PMMA and calcium phosphate cements. Annals of Biomedical Engineering, 42 (4). 751 - 762. ISSN 0090-6964

V

Vafaee, T, Thomas, D orcid.org/0000-0001-5584-9114, Desai, A et al. (6 more authors) (2016) Decellularization of human donor aortic and pulmonary valved conduits using low concentration sodium dodecyl sulfate. Journal of Tissue Engineering and Regenerative Medicine. ISSN 1932-6254

Vardaxoglou, JC, Tribe, J, Whittow, WG et al. (1 more author) (2014) Additively manufactured heterogeneous substrates for three-dimensional control of local permittivity. Electronics Letters, 50 (10). pp. 745-746. ISSN 0013-5194

W

Wasley, T, Li, J, Kay, R et al. (6 more authors) (2016) Enabling Rapid Production and Mass Customisation of Electronics Using Digitally Driven Hybrid Additive Manufacturing Techniques. In: Proceedings. 66th Electronic Components and Technology Conference (ECTC 2016), 31 May - 03 Jun 2016, Las Vegas, NV, USA. IEEE , pp. 849-856. ISBN 978-1-5090-1204-6

Wasley, T, Li, J, Ta, D et al. (6 more authors) (2016) Additive Manufacturing of High Resolution Embedded Electronic Systems. In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid Freeform Fabrication 2016 (SFF Symp 2016), 08-10 Aug 2016, Austin, Texas, USA. University of Texas at Austin , pp. 1838-1855.

Wijayathunga, VN, Oakland, RJ, Jones, AC et al. (2 more authors) (2013) Vertebroplasty: patient and treatment variations studied through parametric computational models. Clinical Biomechanics, 28 (8). 860 - 865. ISSN 0268-0033

Wijayathunga, VN, Ridgway, JP, Ingham, E et al. (6 more authors) (2015) A non-destructive method to distinguish the internal constituent architecture of the intervertebral discs using 9.4 Tesla Magnetic Resonance Imaging. Spine, 40 (24). E1315-E1322. ISSN 0362-2436

Wu, X, Lian, Q, Li, D et al. (1 more author) (2017) Tilting separation analysis of bottom-up mask projection stereolithography based on cohesive zone model. Journal of Materials Processing Technology, 243. pp. 184-196. ISSN 0924-0136

Z

Zeng, P, Rainforth, WM and Stewart, TD (2017) Characterisation of the wear mechanisms in retrieved alumina-on-alumina total hip replacements. Wear, 376–37 (Part A). pp. 212-222. ISSN 0043-1648

Zhang, J, Chen, Z, Wang, L et al. (2 more authors) (2017) A Patient-specific Wear Prediction Framework for an Artificial Knee Joint with Coupled Musculoskeletal Multibody-dynamics and Finite Element Analysis. Tribology International, 109. pp. 382-389. ISSN 0301-679X

Zhang, X, Chen, Z, Wang, L et al. (3 more authors) (2015) Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (7). 477 - 490. ISSN 0954-4119

Zhang, Z, Wang, B, Huang, S et al. (7 more authors) (2016) A novel approach to fabricating a nanotwinned surface on a ternary nickel alloy. Materials and Design, 106. pp. 313-320. ISSN 0261-3069

This list was generated on Tue Jun 27 03:50:01 2017 BST.