Items where authors include "Rainforth, W.M."

Article

Gong, P. orcid.org/0000-0001-6352-1696, Leong, Z. orcid.org/0000-0002-7581-1276, Qi, J. orcid.org/0000-0001-5235-0027 et al. (9 more authors) (2023) Composition and phase structure dependence of magnetic properties for Co2FeCr0.5Alx (x=0.9, 1.2) multi principal component alloys. Acta Materialia, 256. 119113. ISSN 1359-6454

Ruffino, M., Nutter, J., Zeng, X. et al. (3 more authors) (2023) Triple and double twin interfaces in magnesium—the role of disconnections and facets. Scientific Reports, 13. 3861. ISSN 2045-2322

Rodriguez‐Galeano, K.F., Romano‐Acosta, L.F., Palmiere, E.J. orcid.org/0000-0002-4048-8536 et al. (1 more author) (2022) A new approach to etching low‐carbon microalloyed steels to reveal prior austenite grain boundaries and the dual‐phase microstructure. Journal of Microscopy. ISSN 0022-2720

Huang, Y., Gao, J., Vorontsov, V. et al. (7 more authors) (2022) Martensitic twinning transformation mechanism in a metastable IVB element-based body-centered cubic high-entropy alloy with high strength and high work hardening rate. Journal of Materials Science & Technology, 124. pp. 217-231. ISSN 1005-0302

Kwok, T.W.J., Gong, P., Xu, X. et al. (3 more authors) (2022) Microstructure evolution and tensile behaviour of a cold rolled 8 Wt Pct Mn medium manganese steel. Metallurgical and Materials Transactions A, 53 (2). pp. 597-609. ISSN 1073-5623

Gong, P., Turk, A., Nutter, J. et al. (4 more authors) (2022) Hydrogen embrittlement mechanisms in advanced high strength steel. Acta Materialia, 223. 117488. ISSN 1359-6454

Neto, M.Q. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2021) Effect of potential and microstructure on the tribocorrosion behaviour of beta and near beta Ti alloys II. Journal of Bio- and Tribo-Corrosion, 7 (4). 141. ISSN 2198-4220

Namus, R., Rainforth, W.M. orcid.org/0000-0003-3898-0318, Huang, Y. et al. (1 more author) (2021) Effect of grain size and crystallographic structure on the corrosion and tribocorrosion behaviour of a CoCrMo biomedical grade alloy in simulated body fluid. Wear, 478-479. 203884. ISSN 0043-1648

Guan, D. orcid.org/0000-0002-3953-2878, Gao, J. and Rainforth, W.M. (2021) Effect of cryomilling time on microstructure evolution and hardness of cryomilled AZ31 powders. Materials Characterization, 178. 111311. ISSN 1044-5803

Harris, J., Leong, Z., Gong, P. et al. (10 more authors) (2021) Investigation into the magnetic properties of CoFeNiCryCux alloys. Journal of Physics D: Applied Physics, 54 (39). 395003. ISSN 0022-3727

Gong, P., Katzarov, I., Nutter, J. et al. (3 more authors) (2021) Hydrogen suppression of dislocation cell formation in micro and nano indentation of pure iron single crystals. Scripta Materialia, 194. 113683. ISSN 1359-6462

Gao, J., Jiang, S., Zhang, H. et al. (11 more authors) (2021) Facile route to bulk ultrafine-grain steels for high strength and ductility. Nature, 590 (7845). pp. 262-267. ISSN 0028-0836

Neto, M.Q. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2020) Effect of potential and microstructure on the tribocorrosion behaviour of beta and near beta Ti alloys I. Biotribology, 24. 100141. ISSN 2352-5738

Paramatmuni, C., Zheng, Z., Rainforth, W.M. orcid.org/0000-0003-3898-0318 et al. (1 more author) (2020) Twin nucleation and variant selection in Mg alloys: An integrated crystal plasticity modelling and experimental approach. International Journal of Plasticity, 135. 102778. ISSN 0749-6419

Gong, P., Nutter, J., Rivera-Diaz-Del-Castillo, P.E.J. et al. (1 more author) (2020) Hydrogen embrittlement through the formation of low-energy dislocation nanostructures in nanoprecipitation-strengthened steels. Science Advances, 6 (46). eabb6152. ISSN 2375-2548

Sirvent, P., Garrido, M.Á., Sharp, J. et al. (2 more authors) (2020) Improving the oscillating wear response of cold sprayed Ti-6Al-4V coatings through a heat treatment. Surface and Coatings Technology, 399. 126128. ISSN 0257-8972

Namus, R. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2020) Influence of protein adsorption on tribocorrosion behaviour of CoCrMo biomedical-grade alloys. Tribology International, 150. 106364. ISSN 0301-679X

Xu, Y., Gao, J., Huang, Y. et al. (1 more author) (2020) A low-cost metastable beta Ti alloy with high elastic admissible strain and enhanced ductility for orthopaedic application. Journal of Alloys and Compounds, 835. 155391. ISSN 0925-8388

Gong, P., Wynne, B.P., Knowles, A.J. et al. (4 more authors) (2020) Effect of ageing on the microstructural evolution in a new design of maraging steels with carbon. Acta Materialia, 196. pp. 101-121. ISSN 1359-6454

Magnus, C., Sharp, J. orcid.org/0000-0001-8168-8422, Ma, L. et al. (1 more author) (2020) Ramification of thermal expansion mismatch and phase transformation in TiC-particulate/SiC-matrix ceramic composite. Ceramics International, 46 (12). pp. 20488-20495. ISSN 0272-8842

Nutter, J., Rainforth, W.M. orcid.org/0000-0003-3898-0318 and van der Zwaag, S. (2020) Detailed in situ hot stage transmission electron microscope observations of the localized pinning of a mobile ferrite-austenite interface in a Fe-C-Mn alloy by a single oxidic particle. Metallurgical and Materials Transactions A, 51 (8). pp. 3811-3818. ISSN 1073-5623

Gao, J. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2020) The effect of heating rate on discontinuous grain boundary alpha formation in a metastable beta titanium alloy. Metallurgical and Materials Transactions A, 51 (8). pp. 3766-3771. ISSN 1073-5623

Magnus, C., Galvin, T., Ma, L. et al. (2 more authors) (2020) Synthesis and microstructural evolution in ternary metalloceramic Ti3SiC2 consolidated via the Maxthal 312 powder route. Ceramics International, 46 (10, Part A). pp. 15342-15356. ISSN 0272-8842

Gong, P., Katzarov, I.H., Nutter, J. et al. (2 more authors) (2020) The influence of hydrogen on plasticity in pure iron—theory and experiment. Scientific Reports, 10. 10209. ISSN 2045-2322

Magnus, C., Cooper, D., Ma, L. et al. (1 more author) (2020) Microstructures and intrinsic lubricity of in situ Ti3SiC2–TiSi2–TiC MAX phase composite fabricated by reactive spark plasma sintering (SPS). Wear, 448-449. 203169. ISSN 0043-1648

Liang, X.Z., Zhao, G.-H., Owens, J. et al. (3 more authors) (2020) Hydrogen-assisted microcrack formation in bearing steels under rolling contact fatigue. International Journal of Fatigue, 134. 105485. ISSN 0142-1123

Magnus, C., Mostaed, A. orcid.org/0000-0002-2443-7819 and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2020) Wear induced ripplocation during dry sliding wear of TiC-based composite. Wear, 444-445. 203121. ISSN 0043-1648

Galvin, T., Hyatt, N.C., Rainforth, W.M. orcid.org/0000-0003-3898-0318 et al. (2 more authors) (2020) Slipcasting of MAX phase tubes for nuclear fuel cladding applications. Nuclear Materials and Energy, 22. 100725. ISSN 2352-1791

Namus, R., Nutter, J., Qi, J. orcid.org/0000-0001-5235-0027 et al. (1 more author) (2020) The influence of protein concentration, temperature and cathodic polarization on the surface status of CoCrMo biomedical grade alloys. Applied Surface Science, 499. 143908. ISSN 0169-4332

Sharp, J., Müller, I.C., Mandal, P. et al. (7 more authors) (2019) Characterisation of a high-power impulse magnetron sputtered C/Mo/W wear resistant coating by transmission electron microscopy. Surface and Coatings Technology, 377. 124853. ISSN 0257-8972

Magnus, C., Cooper, D., Sharp, J. et al. (1 more author) (2019) Microstructural evolution and wear mechanism of Ti3AlC2 – Ti2AlC dual MAX phase composite consolidated by spark plasma sintering (SPS). Wear, 438-439. 203013. ISSN 0043-1648

Earl, S., Rankin, K.E., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (2 more authors) (2019) Verification of the use of micro-CT scanning to assess the features of entire squat type defects. Wear, 438-439. 203074. ISSN 0043-1648

Magnus, C., Sharp, J. orcid.org/0000-0001-8168-8422 and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2019) The lubricating properties of spark plasma sintered (SPS) Ti3SiC2 MAX phase compound and composite. Tribology Transactions, 63 (1). pp. 38-51. ISSN 1040-2004

Nutter, J., Farahani, H., Rainforth, W.M. orcid.org/0000-0003-3898-0318 et al. (1 more author) (2019) Direct TEM observation of α/γ interface migration during cyclic partial phase transformations at intercritical temperatures in an Fe-0.1C −0.5Mn alloy. Acta Materialia, 178. pp. 68-78. ISSN 1359-6454

Knowles, A.J., Gong, P., Rahman, K.M. et al. (3 more authors) (2019) Development of Ni-free Mn-stabilised maraging steels using Fe2SiTi precipitates. Acta Materialia, 174. pp. 260-270. ISSN 1359-6454

Galvin, T., Hyatt, N.C., Rainforth, W.M. et al. (2 more authors) (2019) Laser sintering of electrophoretically deposited (EPD) Ti3SiC2 MAX phase coatings on titanium. Surface and Coatings Technology, 366. pp. 199-203. ISSN 0257-8972

Guan, D. orcid.org/0000-0002-3953-2878, Liu, X. orcid.org/0000-0002-8491-8358, Gao, J. et al. (3 more authors) (2019) Exploring the mechanism of “Rare Earth” texture evolution in a lean Mg–Zn–Ca alloy. Scientific Reports, 9. 7152. ISSN 2045-2322

Qian, F. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2019) The formation mechanism of reverted austenite in Mn-based maraging steels. Journal of Materials Science, 54 (8). pp. 6624-6631. ISSN 0022-2461

Gao, J., Knowles, A.J., Guan, D. orcid.org/0000-0002-3953-2878 et al. (1 more author) (2019) ω phase strengthened 1.2GPa metastable β titanium alloy with high ductility. Scripta Materialia, 162. pp. 77-81. ISSN 1359-6462

Guan, D. orcid.org/0000-0002-3953-2878, Liu, X., Gao, J. et al. (3 more authors) (2019) Effect of deformation twinning on crystallographic texture evolution in a Mg–6.6Zn–0.2Ca (ZX70) alloy during recrystallisation. Journal of Alloys and Compounds, 774. pp. 556-564. ISSN 0925-8388

Gong, P., Liu, X.G., Rijkenberg, A. et al. (1 more author) (2018) The effect of molybdenum on interphase precipitation and microstructures in microalloyed steels containing titanium and vanadium. Acta Materialia, 161. pp. 374-387. ISSN 1359-6454

Guan, D. orcid.org/0000-0002-3953-2878, Gao, J., Sharp, J. et al. (1 more author) (2018) Enhancing ductility and strength of nanostructured Mg alloy by in-situ powder casting during spark plasma sintering. Journal of Alloys and Compounds, 769. pp. 71-77. ISSN 0925-8388

Gao, J., Huang, Y., Guan, D. orcid.org/0000-0002-3953-2878 et al. (4 more authors) (2018) Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate. Acta Materialia, 152. pp. 301-314. ISSN 1359-6454

Gao, J., Nutter, J., Liu, X. et al. (4 more authors) (2018) Segregation mediated heterogeneous structure in a metastable beta titanium alloy with a superior combination of strength and ductility. Scientific Reports, 8. 7512. ISSN 2045-2322

Gong, P., Sun, L., Wynne, B.P. orcid.org/0000-0001-6536-7004 et al. (2 more authors) (2018) The effect of thermomechanical controlled processing on recrystallisation and subsequent deformation-induced ferrite transformation textures in microalloyed steels. Journal of Materials Science, 53. pp. 6922-6938. ISSN 0022-2461

Galvin, T., Hyatt, N.C., Rainforth, W.M. et al. (2 more authors) (2018) Molten salt synthesis of MAX phases in the Ti-Al-C system. Journal of the European Ceramic Society, 38 (14). pp. 4585-4589. ISSN 0955-2219

Shamba, P., Kerridge, G., Morley, N.A. orcid.org/0000-0002-7284-7978 et al. (2 more authors) (2017) Synthesis of magnetocaloric LaFe11.6Si1.4 alloy by spark plasma sintering. Journal of Physics: Conference Series (903). 012041. ISSN 1742-6588

Muller, I.C., Sharp, J., Rainforth, W.M. et al. (2 more authors) (2017) Tribological response and characterization of Mo-W doped DLC coating. Wear, 376/7 (Part B). pp. 1622-1629. ISSN 0043-1648

Abbasi, E. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2017) Microstructural Evolution of Nb-V-Mo and V Containing TRIP assisted Steels during Thermomechanical Processing. Journal of Materials Science and Technology, 33 (4). pp. 311-320. ISSN 1005-0302

Chen, Y.-S., Haley, D., Gerstl, S.S.A. et al. (6 more authors) (2017) Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel. Science, 355 (6330). pp. 1196-1199. ISSN 0036-8075

Guan, D., Rainforth, W.M. orcid.org/0000-0003-3898-0318, Ma, L. et al. (2 more authors) (2017) Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy. Acta Materialia, 126. C. pp. 132-144. ISSN 1359-6454

Gong, P., Palmiere, E.J. orcid.org/0000-0002-4048-8536 and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2017) Characterisation of strain-induced precipitation behaviour in microalloyed steels during thermomechanical controlled processing. Materials Characterization, 124. pp. 83-89. ISSN 1044-5803

Gong, P., Palmiere, E.J. orcid.org/0000-0002-4048-8536 and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2016) Thermomechanical processing route to achieve ultrafine grains in low carbon microalloyed steels. Acta Materialia, 119. pp. 43-54. ISSN 1359-6454

Zhang, H.R., Kalantari, K., Marincel, D.M. et al. (5 more authors) (2016) The effect of substrate clamping on the paraelectric to antiferroelectric phase transition in Nd-doped BiFeO<inf>3</inf> thin films. Thin Solid Films, 616. pp. 767-772. ISSN 0040-6090

Qian, F., Sharp, J. and Rainforth, W.M. orcid.org/0000-0003-3898-0318 (2016) Microstructural evolution of Mn-based maraging steels and their influences on mechanical properties. Materials Science and Engineering A, 674. pp. 286-298. ISSN 0921-5093

Shamba, P., Morley, N.A., Cespedes, O. et al. (2 more authors) (2016) Optimization of magnetocaloric properties of arc-melted and spark plasma-sintered LaFe11.6Si1.4. Applied Physics A: Materials Science & Processing, 122 (8). ISSN 0947-8396

Qian, F., Sharp, J. and Rainforth, W.M. (2016) Characterisation of L21-ordered Ni2TiAl precipitates in FeMn maraging steels. Materials Characterization, 118. pp. 199-205. ISSN 1044-5803

Galindo-Nava, E.I., Rainforth, W.M. orcid.org/0000-0003-3898-0318 and Rivera-Díaz-del-Castillo, P.E.J. (2016) Predicting microstructure and strength of maraging steels: Elemental optimisation. Acta Materialia, 117. pp. 270-285. ISSN 1359-6454

Guan, D., Rainforth, W.M. orcid.org/0000-0003-3898-0318, Sharp, J. et al. (2 more authors) (2016) On the use of cryomilling and spark plasma sintering to achieve high strength in a magnesium alloy. Journal of Alloys and Compounds, 688. pp. 1141-1150. ISSN 0925-8388

Krzyzanowski, M., Svyetlichnyy, D., Stevenson, G. et al. (1 more author) (2016) Powder bed generation in integrated modelling of additive layer manufacturing of orthopaedic implants. The International Journal of Advanced Manufacturing Technology, 87. pp. 519-530. ISSN 0268-3768

Reeves, N., Sharp, J., Beltran Mir, H. et al. (2 more authors) (2016) Spinel–rock salt transformation in LiCoMnO4−δ. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2185). ISSN 1364-5021

Yang, W.G., Morley, N.A., Sharp, J. et al. (2 more authors) (2016) Strain-mediated converse magnetoelectric coupling strength manipulation by a thin titanium layer. Applied Physics Letters, 108 (1). 012901 . ISSN 0003-6951

Zhang, H., Marincel, D.M., Trolier-McKinstry, S. et al. (2 more authors) (2016) Coherent Growth of a-Fe2O3 in Ti and Nd Co-doped BiFeO3 Thin Films. Materials Research Letters, 4 (3). pp. 168-173.

Zhang, H., Reaney, I.M. orcid.org/0000-0003-3893-6544, Marincel, D.M. et al. (9 more authors) (2015) Stabilisation of Fe2O3-rich Perovskite Nanophase in Epitaxial Rare-earth Doped BiFeO3 Films. SCIENTIFIC REPORTS, 5. 13066. ISSN 2045-2322

Gong, P., Palmiere, E.J. and Rainforth, W.M. (2015) Dissolution and precipitation behaviour in steels microalloyed with niobium during thermomechanical processing. Acta Materialia, 97. 392 - 403. ISSN 1359-6454

Yang, W-G., Morley, N.A., Sharp, J. et al. (1 more author) (2015) Giant electric field tunable magnetic properties in a Co50Fe50/lead magnesium niobate-lead titanate multiferroic heterostructure. Journal of Physics D: Applied Physics, 48 (30). ISSN 0022-3727

Marincel, D.M., Zhang, H., Jesse, S. et al. (7 more authors) (2015) Domain Wall Motion Across Various Grain Boundaries in Ferroelectric Thin Films. Journal of the American Ceramic Society, 98 (6). 1848 - 1857. ISSN 0002-7820

Gao, J., Sharp, J., Guan, D. et al. (2 more authors) (2015) New compositional design for creating tough metallic glass composites with excellent work hardening. Acta Materialia, 86. 208 - 215. ISSN 1359-6454

Conference or Workshop Item

Nordin, N.H., Nan, H., Wang, H. et al. (3 more authors) (2015) Study of Glass Forming Ability of Different Bulk Metallic Glass Alloys. In: USES 2015 - The University of Sheffield Engineering Symposium, 24 Jun 2015, The Octagon Centre, University of Sheffield.

Proceedings Paper

Guan, D. orcid.org/0000-0002-3953-2878, Rainforth, W.M., Sharp, J. et al. (1 more author) (2017) Thermal Stability of Cryomilled Mg Alloy Powder. In: Magnesium Technology 2017. 146th TMS Annual Meeting and Exhibition, 26 Feb - 02 Mar 2017, San Diego, California. The Minerals, Metals & Materials Series . Springer International Publishing , pp. 225-233. ISBN 978-3-319-52391-0

Sharp, J., Muller, I.C., Mandal, P. et al. (5 more authors) (2015) Cross sectional TEM analysis of duplex HIPIMS and DC magnetron sputtered Mo and W doped carbon coatings. In: Journal of Physics: Conference Series. Electron Microscopy and Analysis Group Conference (EMAG2015), 29 June to 2 July 2015, Manchester, UK. IOP .