Items where authors include "Hajirasouliha, I."

Article

Sianko, I., Ozdemir, Z. orcid.org/0000-0002-7491-8047, Hajirasouliha, I. et al. (1 more author) (2025) A probabilistic liquefaction hazard analysis: case studies from the Marmara region. Geotechnical and Geological Engineering, 43 (2). 103. ISSN 0960-3182

Kiral, A. orcid.org/0000-0002-4534-3686, Garcia, R. orcid.org/0000-0002-6363-8859, Petkovski, M. orcid.org/0000-0002-3788-0772 et al. (1 more author) (2024) Seismic performance assessment of steel buildings equipped with a new semi-active displacement-dependent viscous damper. Journal of Earthquake and Tsunami, 18 (06). ISSN 1793-4311

Xin, C., Li, W., Wang, Z. orcid.org/0000-0002-4054-0533 et al. (3 more authors) (2024) Shaking table tests on the stability of dip and anti-dip rock slopes with structural planes induced by seismic motions. Engineering Geology, 341. 107707. ISSN 0013-7952

Gallet, A. orcid.org/0000-0003-4939-9916, Liew, A., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2024) Machine learning for structural design models of continuous beam systems via influence zones. Inverse Problems, 40 (5). 055011. ISSN 0266-5611

Almutairi, F.F., Tsavdaridis, K.D. orcid.org/0000-0001-8349-3979, Alonso-Rodriguez, A. et al. (1 more author) (2024) Experimental investigation using demountable steel-concrete composite reduced web section (RWS) connections under cyclic loads. Bulletin of Earthquake Engineering, 22 (3). pp. 1081-1110. ISSN 1570-761X

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Yilmaz, F., Becque, J. et al. (1 more author) (2023) Lateral performance of cold‐formed steel OSB‐sheathed stud wall panels. ce/papers, 6 (3-4). pp. 1965-1971. ISSN 2509-7075

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Becque, J., Khandan, R. et al. (1 more author) (2023) Machine learning‐based predictions of buckling behaviour of cold‐formed steel structural elements. ce/papers, 6 (3-4). pp. 843-847. ISSN 2509-7075

Sianko, I., Ozdemir, Z. orcid.org/0000-0002-7491-8047, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2023) Probabilistic seismic risk assessment framework: case study Adapazari, Turkey. Bulletin of Earthquake Engineering, 21 (7). pp. 3133-3162. ISSN 1570-761X

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Becque, J., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2023) Predicting the buckling behaviour of thin-walled structural elements using machine learning methods. Thin-Walled Structures, 184. 110518. ISSN 0263-8231

Yilmaz, F. orcid.org/0000-0001-6913-5067, Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2023) Behaviour and performance of OSB-sheathed cold-formed steel stud wall panels under combined vertical and seismic loading. Thin-Walled Structures, 183. 110419. ISSN 0263-8231

Papargyriou, I. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2022) Performance-based seismic design and assessment of multi-storey CFS strap-braced frames. Engineering Structures, 261. 114268. ISSN 0141-0296

Hasanali, M., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Clifton, G.C. et al. (3 more authors) (2022) Capacity and design of cold-formed steel warping-restrained beam-column elements. Journal of Constructional Steel Research, 190. 107139. ISSN 0143-974X

Papargyriou, I., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2022) Cold-formed steel beam-to-column bolted connections for seismic applications. Thin-Walled Structures, 172. 108876. ISSN 0263-8231

Gallet, A. orcid.org/0000-0003-4939-9916, Rigby, S. orcid.org/0000-0001-6844-3797, Tallman, T.N. et al. (7 more authors) (2022) Structural engineering from an inverse problems perspective. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 478 (2257). 20210526. ISSN 1364-5021

Thermou, G.E., Papanikolaou, V.K. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2021) Structural performance of RC columns retrofitted with steel-reinforced grout jackets under combined axial and lateral loading. Engineering Structures, 245. 112946. ISSN 0141-0296

De Domenico, D. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2021) Multi-level performance-based design optimisation of steel frames with nonlinear viscous dampers. Bulletin of Earthquake Engineering, 19. pp. 5015-5049. ISSN 1570-761X

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Ye, J. (2021) Optimisation of cold-formed steel beams for best seismic performance in bolted moment connections. Journal of Constructional Steel Research, 181. 106621. ISSN 0143-974X

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2021) Behavior and design of cold-formed steel bolted connections subjected to combined actions. Journal of Structural Engineering, 147 (4). 04021013. ISSN 0733-9445

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2021) Structural size optimization of single and built-up cold-formed steel beam-column members. Journal of Structural Engineering, 147 (4). 04021030. ISSN 0733-9445

Mohsenian, V., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Filizadeh, R. (2021) Seismic reliability analysis of steel moment-resisting frames retrofitted by vertical link elements using combined series–parallel system approach. Bulletin of Earthquake Engineering, 19 (2). pp. 831-862. ISSN 1570-761X

Meza, F.J., Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) Experimental study of the cross-sectional capacity of cold-formed steel built-up columns. Thin-Walled Structures, 155. 106958. ISSN 0263-8231

Mojtabaei, S.M., Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) Local buckling in cold-formed steel moment-resisting bolted connections : behavior, capacity and design. Journal of Structural Engineering, 146 (9). ISSN 0733-9445

Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2020) Design and optimization of cold-formed steel sections in bolted moment connections considering bimoment. Journal of Structural Engineering, 146 (8). 04020153. ISSN 0733-9445

Mohsenian, V., Filizadeh, R., Ozdemir, Z. et al. (1 more author) (2020) Seismic performance evaluation of deficient steel moment-resisting frames retrofitted by vertical link elements. Structures, 26. pp. 724-736. ISSN 2352-0124

Meza, F.J., Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) Experimental study of cold-formed steel built-up beams. Journal of Structural Engineering, 146 (7). 04020126. ISSN 0733-9445

Phan, D.T., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2020) Coupled element and structural level optimisation framework for cold-formed steel frames. Journal of Constructional Steel Research, 168. 105867. ISSN 0143-974X

Ye, J., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2020) Efficient design of cold-formed steel bolted-moment connections for earthquake resistant frames. Thin-Walled Structures, 150. ISSN 0263-8231

Mohsenian, V., Padashpour, S. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) Seismic reliability analysis and estimation of multilevel response modification factor for steel diagrid structural systems. Journal of Building Engineering, 29. 101168. ISSN 2352-7102

Meza, F.J., Becque, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) Experimental study of cold-formed steel built-up columns. Thin-Walled Structures, 149. 106291. ISSN 0263-8231

Sianko, I., Ozdemir Kilinc, Z., Khoshkholghi, S. et al. (4 more authors) (2020) A practical probabilistic earthquake hazard analysis tool: case study Marmara region. Bulletin of Earthquake Engineering, 18 (6). pp. 2523-2555. ISSN 1573-1456

Wang, Z., Hu, H. orcid.org/0000-0003-1786-9485, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2020) Tensile stress-strain characteristics of rubberised concrete from flexural tests. Construction and Building Materials, 236. 117591. ISSN 0950-0618

Nabid, N., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Petkovski, M. (2020) Multi-criteria performance-based optimization of friction energy dissipation devices in RC frames. Earthquake and Structures, 2. pp. 185-199. ISSN 2092-7614

Senturk, M., Pul, S., Ilki, A. et al. (1 more author) (2020) Development of a monolithic-like precast beam-column moment connection: Experimental and analytical investigation. Engineering Structures, 205. 110057. ISSN 0141-0296

Asadi, P. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2020) A practical methodology for optimum seismic design of RC frames for minimum damage and life-cycle cost. Engineering Structures, 202. 109896. ISSN 0141-0296

Mohsenian, V., Gharaei-Moghaddam, N. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Multilevel seismic demand prediction for acceleration-sensitive non-structural components. Engineering Structures, 200. ISSN 0141-0296

Nabid, N., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Petkovski, M. (2019) Adaptive low computational cost optimisation method for performance-based seismic design of friction dampers. Engineering Structures, 198. ISSN 0141-0296

Russell, J.M., Owen, J.S. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Dynamic column loss analysis of reinforced concrete flat slabs. Engineering Structures, 198. ISSN 0141-0296

Nikkhoo, A., Bahrami Eskandari, A., Farazandeh, A. et al. (1 more author) (2019) Vibration control of bridges under simultaneous effects of earthquake and moving loads using steel pipe dampers. Journal of Vibration and Control, 25 (19-20). pp. 2580-2594. ISSN 1077-5463

Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Ye, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Development of optimum cold-formed steel beams for serviceability and ultimate limit states using Big Bang-Big Crunch optimisation. Engineering Structures, 195. pp. 172-181. ISSN 0141-0296

Mohsenian, V., Nikkhoo, A. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Estimation of seismic response parameters and capacity of irregular tunnel-form buildings. Bulletin of Earthquake Engineering, 17 (9). pp. 5217-5239. ISSN 1570-761X

Thermou, G.E., Papanikolaou, V.K., Lioupis, C. et al. (1 more author) (2019) Steel-Reinforced Grout (SRG) strengthening of shear-critical RC beams. Construction and Building Materials, 216. pp. 68-83. ISSN 0950-0618

Mohammadi, R.K., Garoosi, M.R. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Practical method for optimal rehabilitation of steel frame buildings using buckling restrained brace dampers. Soil Dynamics and Earthquake Engineering, 123. pp. 242-251. ISSN 0267-7261

Nikkhoo, A., Asili, S., Sadigh, S. et al. (2 more authors) (2019) A low computational cost method for vibration analysis of rectangular plates subjected to moving sprung masses. Advances in Computational Design, 4 (3). pp. 307-326. ISSN 2383-8477

Ye, J., Meza, F.J., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (3 more authors) (2019) Experimental investigation of cross-sectional bending capacity of cold-formed steel channels subject to local-distortional buckling interaction. Journal of Structural Engineering, 145 (7). 04019064. ISSN 0733-9445

Ye, J., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857 and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Seismic performance of cold-formed steel bolted moment connections with bolting friction-slip mechanism. Journal of Constructional Steel Research, 156. pp. 122-136. ISSN 0143-974X

Nabid, N., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Petkovski, M. (2019) Simplified method for optimal design of friction damper slip loads by considering near-field and far-field ground motions. Journal of Earthquake Engineering, 25 (9). pp. 1851-1875. ISSN 1363-2469

Parastesh, H., Hajirasouliha, I. orcid.org/0000-0003-2597-8200, Taji, H. et al. (1 more author) (2019) Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints. Journal of Constructional Steel Research, 155. pp. 249-259. ISSN 0143-974X

Ganjavi, B. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2019) Optimum performance-based design of concentrically braced steel frames subjected to near-field ground motion excitations. International Journal of Optimization in Civil Engineering, 9 (2). pp. 177-193. ISSN 2228-7558

Ye, J., Mojtabaei, S.M., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2018) Strength and deflection behaviour of cold-formed steel back-to-back channels. Engineering Structures, 177. pp. 641-654. ISSN 0141-0296

Russell, J., Owen, J. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2018) Nonlinear behaviour of reinforced concrete flat slabs after a column loss event. Advances in Structural Engineering, 21 (14). pp. 2169-2183. ISSN 1369-4332

Khan, S.A., Pilakoutas, K. orcid.org/0000-0001-6672-7665, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2018) Seismic risk assessment for developing countries: Pakistan as a case study. Earthquake Engineering and Engineering Vibration, 17 (4). pp. 787-804. ISSN 1671-3664

Lu, Y., Hajirasouliha, I. and Marshall, A.M. (2018) Direct displacement-based seismic design of flexible-base structures subjected to pulse-like ground motions. Engineering Structures, 168. pp. 276-289. ISSN 0141-0296

Thermou, G. orcid.org/0000-0002-9569-0176 and Hajirasouliha, I. (2018) Design-oriented models for concrete columns confined by steel-reinforced grout jackets. Construction and Building Materials, 178. pp. 313-326. ISSN 0950-0618

Lu, Y., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Marshall, A.M. (2018) An improved replacement oscillator approach for soil-structure interaction analysis considering soft soils. Engineering Structures, 167. pp. 26-38. ISSN 0141-0296

Moghaddam, H., Hosseini Gelekolai, S.M. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2018) More efficient lateral load patterns for seismic design of steel moment resisting frames. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 171 (6). pp. 487-502. ISSN 0965-0911

Nabid, N., Hajirasouliha, I. and Petkovski, M. (2018) Performance-based optimisation of RC frames with friction wall dampers using a low‑cost optimisation method. Bulletin of Earthquake Engineering. pp. 1-24. ISSN 1570-761X

Ye, J., Mojtabaei, S.M. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2018) Local-flexural interactive buckling of standard and optimised cold-formed steel columns. Journal of Constructional Steel Research, 144. pp. 106-118. ISSN 0143-974X

Ye, J., Becque, J., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2018) Development of optimum cold-formed steel sections for maximum energy dissipation in uniaxial bending. Engineering Structures, 161. pp. 55-67. ISSN 0141-0296

Ye, J., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Becque, J. (2018) Experimental investigation of local-flexural interactive buckling of cold-formed steel channel columns. Thin-Walled Structures, 125. pp. 245-258. ISSN 0263-8231

Mojtabaei, S.M., Kabir, M.Z., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2018) Analytical and experimental study on the seismic performance of cold-formed steel frames. Journal of Constructional Steel Research, 143. pp. 18-31. ISSN 0143-974X

Gao, B., Li, T., Ma, T. et al. (3 more authors) (2018) A Practical Grid Generation Procedure for the Design of Free-form Structures. Computers and Structures, 196. pp. 292-310. ISSN 0045-7949

Raffoul, S., Garcia lopez, R., Escolano Margarit, D. et al. (3 more authors) (2017) Behaviour of unconfined and FRP-confined rubberised concrete in axial compression. Construction and Building Materials, 147. pp. 388-397. ISSN 0950-0618

Nabid, N., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Petkovski, M. (2017) A practical method for optimum seismic design of friction wall dampers. Earthquake Spectra, 33 (3). pp. 1033-1052.

Nematzadeh, M., Hajirasouliha, I. orcid.org/0000-0003-2597-8200, Haghinejad, A. et al. (1 more author) (2017) Compressive behaviour of circular steel tube-confined concrete stub columns with active and passive confinement. Steel and Composite Structures, 24 (3). pp. 323-337. ISSN 1229-9367

Mehdizadeh Saradj, F., Pilakoutas, K. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2017) Prioritization of interventions for strengthening architectural heritage. Urbanism Architecture Constructions, 8 (3). pp. 283-298. ISSN 2069-0509

Noii, N., Aghayan, I., Hajirasouliha, I. et al. (1 more author) (2017) A new hybrid method for size and topology optimization of truss structures using modified ALGA and QPGA. Journal of Civil Engineering and Management, 23 (2). pp. 252-262. ISSN 1392-3730

Helal, Y., Garcia, R. orcid.org/0000-0002-6363-8859, Pilakoutas, K. et al. (2 more authors) (2016) Bond of substandard laps in RC beams retrofitted with post-tensioned metal straps. ACI Structural Journal, 113 (6). pp. 1197-1208. ISSN 1944-7361

Lu, Y., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Marshall, A. (2016) Estimation of inelastic displacement demands of flexible-based structures on soft soils. International Journal of Earthquake and Impact Engineering, 1 (1/2). pp. 81-97. ISSN 2397-9372

Jazany, R.A., Hajirasouliha, I., Moghadam, A.S. et al. (2 more authors) (2016) Analytical study on the seismic performance of steel braced frames with masonry infill. Journal of Structural Engineering, 142 (10). 04016083. ISSN 0733-9445

Ganjavi, B., Hao, H. and Hajirasouliha, I. (2016) Influence of Higher Modes on Strength and Ductility Demands of Soil-Structure Systems. Journal of Earthquake and Tsunami, 10 (4). 1650006. ISSN 1793-4311

Ganjavi, B., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Bolourchi, A. (2016) Optimum Lateral Load Distribution for Seismic Design of Nonlinear Shear-Buildings Considering Soil-Structure Interaction. Soil Dynamics and Earthquake Engineering, 88. pp. 356-368. ISSN 1879-341X

Ye, J., Hajirasouliha, I., Becque, J. et al. (1 more author) (2016) Optimum design of cold-formed steel beams using Particle Swarm Optimisation method. Journal of Constructional Steel Research, 122. pp. 80-93. ISSN 1873-5983

Lu, Y., Hajirasouliha, I. and Marshall, A.M. (2016) Performance-based Seismic Design of Flexible-Base Multi-Storey Buildings Considering Soil-Structure Interaction. Engineering Structures, 108. 90 - 103. ISSN 1873-7323

Hajirasouliha, I., Pilakoutas, K. and Mohammadi, R.K. (2016) Effects of uncertainties on seismic behaviour of optimum designed braced steel frames. Steel and Composite Structures: An International Journal, 20 (2). pp. 317-335. ISSN 1598-6233

Helal, Y., Garcia, R., Pilakoutas, K. et al. (2 more authors) (2016) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures, 49 (1-2). pp. 133-147. ISSN 1359-5997

Helal, Y., Garcia, R., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (2 more authors) (2016) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures, 49 (1). pp. 133-147. ISSN 1359-5997

Ye, J., Hajirasouliha, I., Becque, J. et al. (1 more author) (2015) Development of More Efficient Cold-Formed Steel Channel Sections in Bending. Thin-Walled Structures, 101. pp. 1-13. ISSN 0263-8231

Mulyani, R., Ahmadi, R., Pilakoutas, K. et al. (2 more authors) (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. 1094 - 1100. ISSN 1877-7058

Ma, W., Becque, J., Hajirasouliha, I. et al. (1 more author) (2015) Cross-sectional optimization of cold-formed steel channels to Eurocode 3. Engineering Structures, 101. 641 - 651. ISSN 0141-0296

Garcia, R., Pilakoutas, K., Hajirasouliha, I. et al. (3 more authors) (2015) Seismic Retrofitting of RC Buildings Using CFRP and Post-Tensioned Metal Straps: Shake Table Tests. Bulletin of Earthquake Engineering. pp. 1-27. ISSN 1573-761X

Atashzaban, A., Hajirasouliha, I., Jazany, R.A. et al. (1 more author) (2015) Optimum drilled flange moment resisting connections for seismic regions. Journal of Constructional Steel Research, 112. 325 - 338. ISSN 0143-974X

Helal, Y., Garcia, R., Pilakoutas, K. et al. (2 more authors) (2014) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures/Materiaux et Constructions. December 2014. ISSN 1359-5997

Parastesh, H., Hajirasouliha, I. and Ramezani, R. (2014) A new ductile moment-resisting connection for precast concrete frames in seismic regions: An experimental investigation. Engineering Structures, 70. 144 - 157. ISSN 0141-0296

Garcia, R., Hajirasouliha, I., Guadagnini, M. et al. (12 more authors) (2014) Full-scale shaking table tests on a substandard RC building repaired and strengthened with post-tensioned metal straps. Journal of Earthquake Engineering, 18 (2). 187 - 213. ISSN 1363-2469

Jazany, R.A., Hajirasouliha, I. and Farshchi, H. (2013) Influence of masonry infill on the seismic performance of concentrically braced frames. Journal of Constructional Steel Research, 88. 150 - 163. ISSN 0143-974X

Tizani, W., Wang, Z.Y. and Hajirasouliha, I. (2012) Hysteretic performance of a new blind bolted connection to concrete filled columns under cyclic loading: An experimental investigation. Engineering Structures, 46. 535 - 546. ISSN 0141-0296

Hajirasouliha, I. and Pilakoutas, K. (2012) General Seismic Load Distribution for Optimum Performance-Based Design of Shear-Buildings. Journal of Earthquake Engineering, 16 (4). 443 - 462. ISSN 1363-2469

Al-Sunna, R., Pilakoutas, K., Hajirasouliha, I. et al. (1 more author) (2012) Deflection behaviour of FRP reinforced concrete beams and slabs: An experimental investigation. Composites Part B: Engineering, 43 (5). 2125 - 2134. ISSN 1359-8368

Hajirasouliha, I., Asadi, P. and Pilakoutas, K. (2011) An efficient Performance-Based Seismic Design of Reinforced Concrete Frames. Earthquake Engineering & Structural Dynamics, 41 (4). pp. 663-679. ISSN 0098-8847

Hajirasouliha, I., Pilakoutas, K. and Moghaddam, H. (2011) Topology optimization for the seismic design of truss-like structures. Computers and Structures, 89 (7-8). 702 - 711. ISSN 0045-7949

Son, K.S., Hajirasouliha, I. and Pilakoutas, K. (2011) Strength and deformability of waste tyre rubber-filled reinforced concrete columns. Construction and Building Materials, 25 (1). 218 - 226. ISSN 0950-0618

Garcia, R., Hajirasouliha, I. and Pilakoutas, K. (2010) Seismic behaviour of deficient RC frames strengthened with CFRP composites. Engineering Structures, 32 (10). pp. 3075-3085. ISSN 0141-0296

Hajirasouliha, I. and Doostan, A. (2010) A simplified model for seismic response prediction of concentrically braced frames. Advances in Engineering Software, 41 (3). 497 - 505. ISSN 0965-9978

Hajirasouliha, I. and Moghaddam, H. (2009) New Lateral Force Distribution for Seismic Design of Structures. Journal of Structural Engineering, 135 (8). 906 - 915. ISSN 0733-9445

Moghaddam, H. and Hajirasouliha, I. (2007) Optimum strength distribution for seismic design of tall buildings. The Structural Design of Tall and Special Buildings, 17 (2). 331 - 349. ISSN 1541-7794

Moghaddam, H. and Hajirasouliha, I. (2006) Toward more rational criteria for determination of design earthquake forces. International Journal of Solids and Structures, 43 (9). 2631 - 2645. ISSN 0020-7683

Moghaddam, H. and Hajirasouliha, I. (2006) An investigation on the accuracy of pushover analysis for estimating the seismic deformation of braced steel frames. Journal of Constructional Steel Research, 64 (4). 343 - 351. ISSN 0143-974X

Moghaddam, H. and Hajirasouliha, I. (2005) Fundamentals of optimum performance-based design for dynamic excitations. Scientia Iranica, 12 (4). 368 - 378. ISSN 1026-3098

Moghaddam, H., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Doostan, A. (2005) Optimum seismic design of concentrically braced steel frames: concepts and design procedures. Journal of Constructional Steel Research, 61 (2). pp. 151-166. ISSN 0143-974X

Lu, Y., Marshall, A. and Hajirasouliha, I. A Simplified Nonlinear Sway-Rocking Model for Evaluation of Seismic Response of Structures on Shallow Foundations. Soil Dynamics and Earthquake Engineering. ISSN 0267-7261

Book Section

Sianko, I., Garcia, R., Ozdemir, Z. et al. (2 more authors) (2019) Modelling of earthquake hazard and secondary effects for loss assessment in Marmara (Turkey). In: Durrani, T., Wang, W. and Forbes, S., (eds.) Geological Disaster Monitoring Based on Sensor Networks. Springer Natural Hazards . Springer Singapore , pp. 67-81. ISBN 9789811309915

Monograph

Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Nabid, N. (2020) A novel friction-wall system for seismic strengthening of substandard RC buildings. Report. RCUK-TUBITAK Research Partnership Project on "Rapid Earthquake Risk Assessment and Post-Earthquake Disaster Management Framework for Substandard Buildings in Turkey" . The University of Sheffield

Proceedings Paper

Dar, M. orcid.org/0000-0003-2782-9225, Ghowsi, A.F., Anbarasu, M. et al. (2 more authors) (2023) Web crippling instability response in CFS built-up open beams: numerical study and design. In: Proceedings of the Annual Stability Conference Structural Stability Research Council, SSRC 2023. 2023 Annual Stability Conference Structural Stability Research Council, SSRC 2023, 11-14 Apr 2023, Charlotte, NC, USA. Structural Stability Research Council (SSRC) . ISBN 9781713871897

Nabid, N., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 and Petkovski, M. orcid.org/0000-0002-3788-0772 (2019) Performance-based optimisation of RC frames with friction wall dampers. In: Ilki, A. and Çavunt, Y.S., (eds.) Proceedings of IWAMISSE 2019. 2nd International Workshop on Advanced Materials and Innovative Systems in Structural Engineering, 20 Sep 2019, Istanbul, Turkey. International Workshop on Advanced Materials and Innovative Systems in Structural Engineering (IWAMISSE ) . ISBN 9789755615073

Alotaibi, S., Thermou, G., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2019) Tensile behaviour of multi-ply steel-reinforced grout (SRG) composites. In: COMPDYN 2019 proceedings. 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 24-26 Jun 2019, Crete, Greece. Computational Methods in Structural Dynamics & Earthquake Engineering .

Thermou, G. orcid.org/0000-0002-9569-0176, de Felice, G., De Santis, S. et al. (4 more authors) (2018) Mechanical characterization of multi-ply steel reinforced grout composites for the strengthening of concrete structures. In: Ferrier, E., Benzarti, K. and Caron, J.-F., (eds.) CICE 2018. 9th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, 17-19 Jul 2018, Paris, France. IIFC , pp. 298-305.

Mojtabaei, S.M., Papargyriou, I., Hajirasouliha, I. et al. (2 more authors) (2018) Development of cold-formed steel moment-resisting frames using optimum beams in seismic applications. In: 16th European conference on Earthquake Engineering. 16th European conference on Earthquake Engineering, 18-21 Jun 2018, Thessaloniki, Greece. EAEE / ETAM .