Items where authors include "Slatter, T."

Article

Shabana, M., Tomlinson, K. orcid.org/0000-0003-4691-5057 and Slatter, T. (2025) Analysis of a high temperature reciprocating hammer type impact wear apparatus. Wear. 205814. ISSN 0043-1648

Clarke, B., Tomlinson, K. orcid.org/0000-0003-4691-5057, Karunakaran, A. et al. (5 more authors) (2024) The effectiveness of chalk as a friction modifier for finger pad contact with rocks of varying roughness. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology. ISSN 1754-3371

Osmond, L., Cook, I., Curtis, D. et al. (1 more author) (2024) Tool life and wear mechanisms of CVD coated and uncoated SiAlON ceramic milling inserts when machining aged Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 238 (6-7). pp. 1069-1083. ISSN 0954-4054

Tomlinson, K. orcid.org/0000-0003-4691-5057, Davison, S., King, P. et al. (3 more authors) (2024) On the role of friction modifier additives in the oil control ring & piston liner contact. Journal of Tribology, 146 (4). 042201. ISSN 0742-4787

Hererra, P., Hernandez Nava, E., Thornton, R. et al. (1 more author) (2023) Abrasive wear resistance of Ti-6AL-4V obtained by the conventional manufacturing process and by electron beam melting (EBM). Wear, 524-525. 204879. ISSN 0043-1648

Proud, L., Tapoglou, N., Wika, K. et al. (2 more authors) (2023) Role of CO2 cooling strategies in managing tool wear during the shoulder milling of grade 2 commercially pure titanium. Wear, 524-525. 204798. ISSN 0043-1648

Slatter, T. orcid.org/0000-0002-0485-4615, Zalzalah, M. and Lewis, R. (2023) Analysis of reciprocating hammer type impact wear apparatus. Wear, 523. 204816. ISSN 0043-1648

Osmond, L., Cook, I. and Slatter, T. orcid.org/0000-0002-0485-4615 (2023) Tribological properties of multilayer CVD coatings deposited on SiAlON ceramic milling inserts. Journal of Manufacturing and Materials Processing, 7 (2). 67. ISSN 2504-4494

Walker, M., Vincent, J., Benson, L. et al. (9 more authors) (2022) Effect of relative humidity on transfer of aerosol-deposited artificial and human saliva from surfaces to artificial finger-pads. Viruses, 14 (5). 1048. ISSN 1999-4915

Proud, L., Tapoglou, N. and Slatter, T. orcid.org/0000-0002-0485-4615 (2022) A review of CO2 coolants for sustainable machining. Metals, 12 (2). 283. ISSN 2075-4701

Osmond, L., Curtis, D. orcid.org/0000-0001-6402-6996 and Slatter, T. orcid.org/0000-0002-0485-4615 (2021) Chip formation and wear mechanisms of SiAlON and whisker-reinforced ceramics when turning Inconel 718. Wear, 486-487. 204128. ISSN 0043-1648

Zalzalah, M. orcid.org/0000-0001-5712-5531, Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2021) A new predictive model for normal and compound impact wear. Wear, 480-481. 203954. ISSN 0043-1648

Alhadeff, L., Marshall, M. orcid.org/0000-0003-3038-4626, Curtis, D. orcid.org/0000-0001-6402-6996 et al. (1 more author) (2021) Applying experimental micro-tool wear measurement techniques to industrial environments. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235 (10). pp. 1588-1601. ISSN 0954-4054

Zalzalah, M., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2021) Defining the role of 'zero wear volume' in percussive impact. Wear, 464-465. 203535. ISSN 0043-1648

Race, A., Zwierzak, I., Secker, J. orcid.org/0000-0001-9545-9970 et al. (4 more authors) (2020) Environmentally sustainable cooling strategies in milling of SA516 : effects on surface integrity of dry, flood and MQL machining. Journal of Cleaner Production, 288. 125580. ISSN 0959-6526

Watson, M., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2020) Improvements to the linear transform technique for generating randomly rough surfaces with symmetrical autocorrelation functions. Tribology International, 151. 106487. ISSN 0301-679X

Lai, F., Qu, S., Qin, H. et al. (4 more authors) (2020) A comparison of wear behaviour of heat resistant steel engine valves and TiAl engine valves. Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology, 234 (10). pp. 1549-1562. ISSN 1350-6501

Watson, M., White, B., Lanigan, J. et al. (2 more authors) (2020) The composition and friction-reducing properties of leaf layers. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 476 (2239). 20200057. ISSN 1364-5021

Carrell, J., Lewis, R. orcid.org/0000-0002-4300-0540 and Slatter, T. orcid.org/0000-0002-0485-4615 (2020) Elastomer solubility and stress relaxation in bio-lubricants. Tribology International, 141. ISSN 0301-679X

Alhadeff, L.L. and Slatter, T. orcid.org/0000-0002-0485-4615 (2019) A straightforward and low-cost pre-inspection measurement method for small gears. Manufacturing Letters, 23. pp. 23-28. ISSN 2213-8463

Alhadeff, L., Marshall, M. and Slatter, T. orcid.org/0000-0002-0485-4615 (2019) The influence of tool coating on the length of the normal operating region (steady-state wear) for micro end mills. Precision Engineering, 60. pp. 306-319. ISSN 0141-6359

Watson, M., Christoforou, P., Herrera, P. et al. (20 more authors) (2019) An analysis of the quality of experimental design and reliability of results in tribology research. Wear, 426-427 (Part B). pp. 1712-1718. ISSN 0043-1648

Lai, F., Qu, S., Lewis, R. et al. (3 more authors) (2019) The influence of ultrasonic surface rolling on the fatigue and wear properties of 23-8N engine valve steel. International Journal of Fatigue. ISSN 0142-1123

Lai, F., Qu, S., Lewis, R. orcid.org/0000-0002-4300-0540 et al. (4 more authors) (2019) Optimization of friction welding process parameters for 42Cr9Si2 hollow head and sodium filled engine valve and valve performance evaluation. Materials, 12 (7). 1123. ISSN 1996-1944

Alhadeff, L., Marshall, M., Curtis, D. et al. (1 more author) (2019) Protocol for tool wear measurement in micro-milling. Wear, 420-42. pp. 54-67. ISSN 0043-1648

Alhadeff, L.L., Marshall, M.B. orcid.org/0000-0003-3038-4626 and Slatter, T. orcid.org/0000-0002-0485-4615 (2019) Wear data for trials machining brass, titanium grade 2 and Hastelloy in order to characterize wear of micro-tools. Data Brief, 22. pp. 574-577. ISSN 2352-3409

Lai, F., Qu, S., Duan, Y. et al. (6 more authors) (2018) The wear and fatigue behaviours of hollow head & sodium filled engine valve. Tribology International, 128. pp. 75-88. ISSN 0301-679X

Charoenprasit, S., Seemuang, N. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Monitoring Tool Wear in Drilling Process Using Spindle Noise Features. International Journal of Mechanical Engineering and Robotics Research, 7 (5). pp. 564-568. ISSN 2278-0149

Seemuang, N., Panich, S. and Slatter, T. (2018) Bendability evaluation of sheet metals in three-point bending test by using acoustic emission features. Journal of Applied Science, 16 (2). pp. 15-22. ISSN 1513-7805

Abdulqadir, L.B., Mohd Nor, N., Lewis, R. et al. (1 more author) (2018) Contemporary challenges of soot build-up in IC engine and their tribological implications. Tribology: Materials, Surfaces and Interfaces, 12 (3). pp. 115-129. ISSN 1751-5831

Seemuang, N., Panich, S. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Crack initiation detection in JAC780Y during tensile loading by using direct current potential drop and acoustic emission techniques. International Journal of Mechanical Engineering and Robotics Research, 7 (4). pp. 348-352. ISSN 2278-0149

Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Friction and wear response of vegetable oils and their blends with mineral engine oil in a reciprocating sliding contact at severe contact conditions. Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology, 232 (3). pp. 244-258. ISSN 1350-6501

Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2018) Hardness characterisation of grey cast iron and its tribological performance in a contact lubricated with soybean oil. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (1). pp. 190-203. ISSN 0954-4062

Taylor, E. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Role of temperature parameters in achieving precision traverse cylindrical grinding of chrome-plated ferrous metal rolls. Journal of Manufacturing Science and Engineering, 139 (12). 121012. ISSN 1087-1357

Seemuang, N. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Using Barkhausen Noise to Measure Coating Depth of Coated High-Speed Steel. International Journal of Advanced Manufacturing Technology, 92 (1-4). pp. 247-258. ISSN 0268-3768

Carrell, J., Slatter, T., Little, U. orcid.org/0000-0002-0485-4615 et al. (1 more author) (2017) Combining DLC, Shot blasting, chemical dip and nano fullerene surface treatments to reduce wear and friction when used with bio-lubricants in automotive contacts. SAE Technical Papers. 2017-01-0878. ISSN 0148-7191

Bahari, A., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Friction and wear phenomena of vegetable oil based lubricants with additives at severe sliding wear conditions. Tribology Transactions, 61 (2). ISSN 1040-2004

Vera-Cardenas, E.E., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Sensitivity study of a valve recession model. Open Journal of Applied Sciences, 7 (2). pp. 50-56. ISSN 2165-3917

Vera-Cardenas, E.E., Lewis, R. and Slatter, T. orcid.org/0000-0002-0485-4615 (2017) Sliding Wear Study on the Valve-Seat Insert Contact. Open Journal of Applied Sciences, 7 (2). pp. 42-49. ISSN 2165-3917

Lewis, R., Magel, E., Wang, W-J. et al. (4 more authors) (2017) Towards a Standard Approach for Wear Testing of Wheel and Rail Materials. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 231 (7). pp. 760-774. ISSN 0954-4097

Bruce, T., Long, H. orcid.org/0000-0003-1673-1193, Slatter, T. orcid.org/0000-0002-0485-4615 et al. (1 more author) (2016) Formation of white etching cracks at manganese sulfide (MnS) inclusions in bearing steel due to hammering impact loading. Wind Energy, 19 (10). pp. 1903-1915. ISSN 1095-4244

Seemuang, N., Mcleay, T. and Slatter, T. orcid.org/0000-0002-0485-4615 (2016) Using spindle noise to monitor tool wear in a turning process. International Journal of Advanced Manufacturing Technology. p. 10. ISSN 0268-3768

Lewis, R., Tsoraki, C., Broughton, J. et al. (4 more authors) (2011) Abrasive and impact wear of stone used to manufacture axes in Neolithic Greece. Wear, 271 (9-10). pp. 2549-2560. ISSN 0043-1648

Slatter, T., Taylor, H., Lewis, R. et al. (1 more author) (2009) The influence of laser hardening on wear in the valve and valve seat contact. Wear, 267 (5-8). pp. 797-806. ISSN 00431648

Lewis, R., Dwyer-Joyce, R.S., Slatter, T. et al. (1 more author) (2004) Valve recession: From experiment to predictive model. VDI Berichte (1813). pp. 79-93. ISSN 0083-5560

Proceedings Paper

Alhadeff, L.L., Curtis, D.T. orcid.org/0000-0001-6402-6996, Marshall, M.B. orcid.org/0000-0003-3038-4626 et al. (1 more author) (2018) The Application of Wire Electrical Discharge Machining (WEDM) in the Prototyping of Miniature Brass Gears. In: Procedia CIRP. 8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 Jun 2018, Budapest, Hungary. Elsevier , pp. 642-645.

Carrell, J., Slatter, T. orcid.org/0000-0002-0485-4615 and Lewis, R. orcid.org/0000-0002-4300-0540 (2018) The compatability of multilayer surface treatments with bio-lubricant base oils. In: STLE 2018 Extended Abstracts & Presentations. 73rd Society of Tribologists and Lubrication Engineers Annual Meeting and Exhibition 2018, 20-24 May 2018, Minneapolis, MN, USA. , Minneapolis, MN, USA , pp. 156-158.