Items where authors include "Pilakoutas, K."

Article

Oleng, M. orcid.org/0000-0003-3933-5230, Ozdemir, Z. and Pilakoutas, K. orcid.org/0000-0001-6672-7665 (2025) Stochastic event-based probabilistic earthquake risk assessment framework for Uganda: towards informing the National Policy for Disaster preparedness and management. Bulletin of Earthquake Engineering, 23 (4). pp. 1371-1406. ISSN 1570-761X

Sianko, I., Ozdemir, Z. orcid.org/0000-0002-7491-8047, Hajirasouliha, I. et al. (1 more author) (2025) A probabilistic liquefaction hazard analysis: case studies from the Marmara region. Geotechnical and Geological Engineering, 43 (2). 103. ISSN 0960-3182

Oleng, M. orcid.org/0000-0003-3933-5230, Ozdemir, Z. orcid.org/0000-0002-7491-8047 and Pilakoutas, K. orcid.org/0000-0001-6672-7665 (2024) Co-seismic and rainfall-triggered landslide hazard susceptibility assessment for Uganda derived using fuzzy logic and geospatial modelling techniques. Natural Hazards, 120 (15). pp. 14049-14082. ISSN 0921-030X

Dehghani, O., Eslami, A., Mahdavipour, M.A. et al. (3 more authors) (2024) Ceramic waste powder as a cement replacement in concrete paving blocks: mechanical properties and environmental assessment. International Journal of Pavement Engineering, 25 (1). 2370563. ISSN 1029-8436

Helal, Y., Garcia, R. orcid.org/0000-0002-6363-8859, Imjai, T. et al. (3 more authors) (2024) Seismic behaviour of exterior RC beam-column joints repaired and strengthened using post-tensioned metal straps. Bulletin of Earthquake Engineering, 22 (6). pp. 3261-3286. ISSN 1570-761X

Oleng, M. orcid.org/0000-0003-3933-5230, Ozdemir, Z. and Pilakoutas, K. (2024) Probabilistic seismic hazard assessment framework for Uganda: a stochastic event-based modelling approach. Bulletin of Earthquake Engineering, 22 (5). pp. 1539-1579. ISSN 1570-761X

Wang, Z. orcid.org/0000-0002-4054-0533, Hu, H., Papastergiou, P. et al. (3 more authors) (2024) Effect of fibre length on the mechanical properties of SFRC using recycled Steel fibres. Construction and Building Materials, 415. 134890. ISSN 0950-0618

Alshammari, T.O. orcid.org/0000-0002-6251-5080, Pilakoutas, K. and Guadagnini, M. orcid.org/0000-0003-2551-2187 (2023) Effect of curing methods on plastic shrinkage cracking. Construction Materials, 3 (2). pp. 244-258. ISSN 2673-7108

Sianko, I., Ozdemir, Z. orcid.org/0000-0002-7491-8047, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2023) Probabilistic seismic risk assessment framework: case study Adapazari, Turkey. Bulletin of Earthquake Engineering, 21 (7). pp. 3133-3162. ISSN 1570-761X

Raffoul, S., Margarit, D.E., Garcia, R. et al. (2 more authors) (2023) A new cyclic model for FRP-confined rubberized concrete. Structural Concrete, 24 (1). pp. 1627-1641. ISSN 1464-4177

Alshammari, T.O. orcid.org/0000-0002-6251-5080, Pilakoutas, K. and Guadagnini, M. orcid.org/0000-0003-2551-2187 (2023) Performance of manufactured and recycled steel fibres in restraining concrete plastic shrinkage cracks. Materials, 16 (2). 713. ISSN 1996-1944

Alshammari, T.O. orcid.org/0000-0002-6251-5080, Guadagnini, M. orcid.org/0000-0003-2551-2187 and Pilakoutas, K. orcid.org/0000-0001-6672-7665 (2022) The effect of harsh environmental conditions on concrete plastic shrinkage cracks: case study Saudi Arabia. Materials, 15 (23). 8622. ISSN 1996-1944

Polydorou, T., Kyriakides, N., Lampropoulos, A. et al. (5 more authors) (2022) Concrete with a high content of end-of-life tire materials for flexural strengthening of reinforced concrete structures. Materials, 15 (17). 6150.

Papargyriou, I., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2022) Cold-formed steel beam-to-column bolted connections for seismic applications. Thin-Walled Structures, 172. 108876. ISSN 0263-8231

Jia, L., Fang, Z., Huang, Z. et al. (3 more authors) (2021) Flexural behavior of UHPC beams prestressed with external CFRP tendons. Applied Sciences, 11 (19). 9189.

Imjai, T., Guadagnini, M. orcid.org/0000-0003-2551-2187, Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (3 more authors) (2021) A practical macro-mechanical model for the bend capacity of fibre-reinforced polymer bars. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 174 (10). pp. 824-835. ISSN 0965-0911

Chakraborty, S. orcid.org/0000-0002-1387-0385, Mandal, R., Chakraborty, S. et al. (2 more authors) (2021) Chemical attack and corrosion resistance of concrete prepared with electrolyzed water. Journal of Materials Research and Technology, 11. pp. 1193-1205. ISSN 2238-7854

Imjai, T., Garcia, R., Guadagnini, M. orcid.org/0000-0003-2551-2187 et al. (1 more author) (2020) Strength degradation in curved fiber-reinforced polymer (FRP) bars used as concrete reinforcements. Polymers, 12 (8). 1653. ISSN 2073-4360

Ye, J., Mojtabaei, S.M. orcid.org/0000-0002-4876-4857, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (1 more author) (2020) Efficient design of cold-formed steel bolted-moment connections for earthquake resistant frames. Thin-Walled Structures, 150. ISSN 0263-8231

Sianko, I., Ozdemir Kilinc, Z., Khoshkholghi, S. et al. (4 more authors) (2020) A practical probabilistic earthquake hazard analysis tool: case study Marmara region. Bulletin of Earthquake Engineering, 18 (6). pp. 2523-2555. ISSN 1573-1456

Wang, Z., Hu, H. orcid.org/0000-0003-1786-9485, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2020) Tensile stress-strain characteristics of rubberised concrete from flexural tests. Construction and Building Materials, 236. 117591. ISSN 0950-0618

Huang, H., Garcia, R., Huang, S-S. orcid.org/0000-0003-2816-7104 et al. (2 more authors) (2019) A practical creep model for concrete elements under eccentric compression. Materials and Structures, 52 (6). 119. ISSN 1359-5997

Raffoul, S., Escolano-Margarit, D., Garcia, R. et al. (2 more authors) (2019) Constitutive model for rubberized concrete passively confined with FRP laminates. Journal of Composites for Construction, 23 (6). ISSN 1090-0268

Figueiredo, F., Huang, S.-S. orcid.org/0000-0003-2816-7104, Angelakopoulos, H. et al. (2 more authors) (2019) Effects of recycled steel and polymer fibres on explosive fire spalling of concrete. Fire Technology, 55 (5). pp. 1495-1516. ISSN 0015-2684

Alsaif, A. orcid.org/0000-0002-3057-0720, Garcia, R. orcid.org/0000-0002-6363-8859, Figueiredo, F.P. et al. (4 more authors) (2019) Fatigue performance of flexible steel fibre reinforced rubberised concrete pavements. Engineering Structures, 193. pp. 170-183. ISSN 0141-0296

Ye, J., Meza, F.J., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (3 more authors) (2019) Experimental investigation of cross-sectional bending capacity of cold-formed steel channels subject to local-distortional buckling interaction. Journal of Structural Engineering, 145 (7). 04019064. ISSN 0733-9445

Hu, H. orcid.org/0000-0003-1786-9485, Wang, Z., Figueiredo, F.P. et al. (3 more authors) (2019) Postcracking tensile behavior of blended steel fiber-reinforced concrete. Structural Concrete, 20 (2). pp. 707-719. ISSN 1464-4177

Al-musawi, H., Figueiredo, F.P., Guadagnini, M. orcid.org/0000-0003-2551-2187 et al. (1 more author) (2019) Shrinkage properties of plain and recycled steel–fibre-reinforced rapid hardening mortars for repairs. Construction and Building Materials, 197. pp. 369-384. ISSN 0950-0618

Cholostiakow, S., Di Benedetti, M. orcid.org/0000-0001-7870-1323, Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (1 more author) (2019) Effect of beam depth on shear behavior of FRP RC beams. Journal of Composites for Construction, 23 (1). 04018075. ISSN 1090-0268

Alsaif, A. orcid.org/0000-0002-3057-0720, Bernal, S.A. orcid.org/0000-0002-9647-3106, Guadagnini, M. orcid.org/0000-0003-2551-2187 et al. (1 more author) (2019) Freeze-thaw resistance of steel fibre reinforced rubberised concrete. Construction and Building Materials, 195. pp. 450-458. ISSN 0950-0618

Al-musawi, H., Figueiredo, F.P., Bernal, S.A. orcid.org/0000-0002-9647-3106 et al. (2 more authors) (2019) Performance of rapid hardening recycled clean steel fibre materials. Construction and Building Materials, 195. pp. 483-496. ISSN 0950-0618

Ye, J., Mojtabaei, S.M., Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2018) Strength and deflection behaviour of cold-formed steel back-to-back channels. Engineering Structures, 177. pp. 641-654. ISSN 0141-0296

Al-Kamyani, Z., Figueiredo, F.P., Hu, H. et al. (2 more authors) (2018) Shrinkage and flexural behaviour of free and restrained hybrid steel fibre reinforced concrete. Construction and Building Materials, 189. pp. 1007-1018. ISSN 0950-0618

Alsaif, A. orcid.org/0000-0002-3057-0720, Bernal, S.A. orcid.org/0000-0002-9647-3106, Guadagnini, M. orcid.org/0000-0003-2551-2187 et al. (1 more author) (2018) Durability of steel fibre reinforced rubberised concrete exposed to chlorides. Construction and Building Materials, 188. pp. 130-142. ISSN 0950-0618

Hu, H. orcid.org/0000-0003-1786-9485, Papastergiou, P., Angelakopoulos, H. et al. (2 more authors) (2018) Mechanical properties of SFRC using blended Recycled Tyre Steel Cords (RTSC) and Recycled Tyre Steel Fibres (RTSF). Construction and Building Materials, 187. pp. 553-564. ISSN 0950-0618

Khan, S.A., Pilakoutas, K. orcid.org/0000-0001-6672-7665, Hajirasouliha, I. orcid.org/0000-0003-2597-8200 et al. (2 more authors) (2018) Seismic risk assessment for developing countries: Pakistan as a case study. Earthquake Engineering and Engineering Vibration, 17 (4). pp. 787-804. ISSN 1671-3664

Alsaif, A. orcid.org/0000-0002-3057-0720, Koutas, L. orcid.org/0000-0002-7259-6910, Bernal, S.A. orcid.org/0000-0002-9647-3106 et al. (2 more authors) (2018) Mechanical performance of steel fibre reinforced rubberised concrete for flexible concrete pavements. Construction and Building Materials, 172. pp. 533-543. ISSN 0950-0618

Huang, H., Huang, S.-S. orcid.org/0000-0003-2816-7104 and Pilakoutas, K. (2018) Modeling for assessment of long-term behavior of prestressed concrete box-girder bridges. Journal of Bridge Engineering, 23 (3). 04018002. ISSN 1084-0702

Hu, H., Papastergiou, P., Angelakopoulos, H. et al. (2 more authors) (2018) Mechanical properties of SFRC using blended manufactured and recycled tyre steel fibres. Construction and Building Materials, 163. pp. 376-389. ISSN 0950-0618

Kyriakides, N., Sohaib, A., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (4 more authors) (2018) Evaluation of seismic demand for substandard reinforced concrete structures. Open Construction and Building Technology Journal, 12. pp. 9-33.

Ismail, K.S., Guadagnini, M. orcid.org/0000-0003-2551-2187 and Pilakoutas, K. orcid.org/0000-0001-6672-7665 (2018) Strut-and-Tie Modeling of Reinforced Concrete Deep Beams. Journal of Structural Engineering, 144 (2). ISSN 0733-9445

Huang, H., Garcia, R. orcid.org/0000-0002-6363-8859, Guadagnini, M. orcid.org/0000-0003-2551-2187 et al. (1 more author) (2017) Effect of section geometry on development of shrinkage-induced deformations in box girder bridges. Materials and Structures, 50 (5). 222. ISSN 1359-5997

Raffoul, S., Garcia lopez, R., Escolano Margarit, D. et al. (3 more authors) (2017) Behaviour of unconfined and FRP-confined rubberised concrete in axial compression. Construction and Building Materials, 147. pp. 388-397. ISSN 0950-0618

Alwaeli, W., Mwafy, A., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (1 more author) (2017) A methodology for defining seismic scenario-structure-based limit state criteria for rc high-rise wall buildings using net drift. Earthquake Engineering and Structural Dynamics, 46 (8). pp. 1325-1344. ISSN 0098-8847

Alwaeli, W., Mwafy, A., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (1 more author) (2017) Multi-level nonlinear modeling verification scheme of RC high-rise wall buildings. Bulletin of Earthquake Engineering, 15 (5). pp. 2035-2053. ISSN 1570-761X

Jafarifar, N., Pilakoutas, K., Angelakopoulos, H. et al. (1 more author) (2017) Post-cracking tensile behaviour of steel-fibre-reinforced roller-compacted-concrete for FE modelling and design purposes. Materiales de Construcción, 67 (326). p. 122. ISSN 0465-2746

Mehdizadeh Saradj, F., Pilakoutas, K. and Hajirasouliha, I. orcid.org/0000-0003-2597-8200 (2017) Prioritization of interventions for strengthening architectural heritage. Urbanism Architecture Constructions, 8 (3). pp. 283-298. ISSN 2069-0509

Garcia, R., Guadagnini, M., Pilakoutas, K. et al. (1 more author) (2017) Fibre-reinforced polymer strengthening of substandard lap-spliced reinforced concrete members: A comprehensive survey. Advances in Structural Engineering, 20 (6). pp. 976-1001. ISSN 1369-4332

Ma, C-K., Awang, A.Z., Garcia, R. et al. (2 more authors) (2016) Behaviour of Over-reinforced High-Strength Concrete Beams Confined with Post-Tensioned Steel Straps: an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. ISSN 1751-7648

Helal, Y., Garcia, R. orcid.org/0000-0002-6363-8859, Pilakoutas, K. et al. (2 more authors) (2016) Bond of substandard laps in RC beams retrofitted with post-tensioned metal straps. ACI Structural Journal, 113 (6). pp. 1197-1208. ISSN 1944-7361

Raffoul, S., Garcia, R., Pilakoutas, K. et al. (2 more authors) (2016) Optimisation of rubberised concrete with high rubber content: an experimental investigation. Construction and Building Materials, 124. pp. 371-404. ISSN 0950-0618

Imjai, T., Guadagnini, M. orcid.org/0000-0003-2551-2187, Garcia, R. et al. (1 more author) (2016) A practical method for determining shear crack induced deformation in FRP RC beams. Engineering Structures, 126. pp. 353-364. ISSN 0141-0296

Ma, C.K., Awang, A.Z., Garcia, R. et al. (3 more authors) (2016) Nominal Curvature Design of Circular HSC Columns Confined with Post-tensioned Steel Straps. Structures, 7. pp. 25-32. ISSN 2352-0124

Younis, K.H. and Pilakoutas, K. (2016) Assessment of Post-Restrained Shrinkage Mechanical Properties of Concrete. ACI Materials Journal, 113 (3). pp. 267-276. ISSN 0889-325X

Hajirasouliha, I., Pilakoutas, K. and Mohammadi, R.K. (2016) Effects of uncertainties on seismic behaviour of optimum designed braced steel frames. Steel and Composite Structures: An International Journal, 20 (2). pp. 317-335. ISSN 1598-6233

Helal, Y., Garcia, R., Pilakoutas, K. et al. (2 more authors) (2016) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures, 49 (1-2). pp. 133-147. ISSN 1359-5997

Helal, Y., Garcia, R., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (2 more authors) (2016) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures, 49 (1). pp. 133-147. ISSN 1359-5997

Ye, J., Hajirasouliha, I., Becque, J. et al. (1 more author) (2015) Development of More Efficient Cold-Formed Steel Channel Sections in Bending. Thin-Walled Structures, 101. pp. 1-13. ISSN 0263-8231

Mulyani, R., Ahmadi, R., Pilakoutas, K. et al. (2 more authors) (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. 1094 - 1100. ISSN 1877-7058

Ahmad, S., Kyriakides, N., Pilakoutas, K. et al. (2 more authors) (2015) Seismic fragility assessment of existing sub-standard low strength reinforced concrete structures. Earthquake Engineering and Engineering Vibration, 14 (3). 439 - 452. ISSN 1671-3664

Chau-Khun, M., Awang, A.Z., Omar, W. et al. (3 more authors) (2015) Elastic Design of Slender High-Strength RC Circular Columns Confined with External Tensioned Steel Straps. Advances in Structural Engineering, 18 (9). 1487 - 1499. ISSN 1369-4332

Garcia, R., Pilakoutas, K., Hajirasouliha, I. et al. (3 more authors) (2015) Seismic Retrofitting of RC Buildings Using CFRP and Post-Tensioned Metal Straps: Shake Table Tests. Bulletin of Earthquake Engineering. pp. 1-27. ISSN 1573-761X

Angelakopoulos, H., Papastergiou, P. and Pilakoutas, K. (2015) Fibrous roller-compacted concrete with recycled materials - Feasibility study. Magazine of Concrete Research, 67 (15). 801 - 811. ISSN 0024-9831

Garcia, R., Helal, Y., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (1 more author) (2015) Bond strength of short lap splices in RC beams confined with steel stirrups or external CFRP. Materials and Structures, 48. pp. 277-293. ISSN 1359-5997

Helal, Y., Garcia, R., Pilakoutas, K. et al. (2 more authors) (2014) Strengthening of short splices in RC beams using Post-Tensioned Metal Straps. Materials and Structures/Materiaux et Constructions. December 2014. ISSN 1359-5997

Ahmad, S., Pilakoutas, K., Khan, Q.U.Z. et al. (1 more author) (2014) Stress-Strain Model for Low-Strength Concrete in Uni-Axial Compression. Arabian Journal for Science and Engineering, 40 (2). 313 - 328. ISSN 1319-8025

Kyriakides, N., Ahmad, S., Pilakoutas, K. orcid.org/0000-0001-6672-7665 et al. (2 more authors) (2014) A probabilistic analytical seismic vulnerability assessment framework for substandard structures in developing countries. Earthquakes and Structures, 6 (6). pp. 665-687. ISSN 2092-7614

Garcia, R., Jemaa, Y., Helal, Y. et al. (2 more authors) (2014) Seismic strengthening of severely damaged beam-column RC joints using CFRP. Journal of Composites for Construction, 18 (2). 04013048. ISSN 1090-0268

Garcia, R., Hajirasouliha, I., Guadagnini, M. et al. (12 more authors) (2014) Full-scale shaking table tests on a substandard RC building repaired and strengthened with post-tensioned metal straps. Journal of Earthquake Engineering, 18 (2). 187 - 213. ISSN 1363-2469

Garcia, R., Helal, Y., Pilakoutas, K. et al. (1 more author) (2014) Bond behaviour of substandard splices in RC beams externally confined with CFRP. Construction and Building Materials, 50. 340 - 351. ISSN 0950-0618

Garcia, R., Helal, Y., Pilakoutas, K. et al. (1 more author) (2013) Bond strength of short lap splices in RC beams confined with steel stirrups or external CFRP. Materials and Structures. Published Online 9th October 2013. 1 - 17. ISSN 1359-5997

Hajirasouliha, I. and Pilakoutas, K. (2012) General Seismic Load Distribution for Optimum Performance-Based Design of Shear-Buildings. Journal of Earthquake Engineering, 16 (4). 443 - 462. ISSN 1363-2469

Al-Sunna, R., Pilakoutas, K., Hajirasouliha, I. et al. (1 more author) (2012) Deflection behaviour of FRP reinforced concrete beams and slabs: An experimental investigation. Composites Part B: Engineering, 43 (5). 2125 - 2134. ISSN 1359-8368

Hajirasouliha, I., Asadi, P. and Pilakoutas, K. (2011) An efficient Performance-Based Seismic Design of Reinforced Concrete Frames. Earthquake Engineering & Structural Dynamics, 41 (4). pp. 663-679. ISSN 0098-8847

Hajirasouliha, I., Pilakoutas, K. and Moghaddam, H. (2011) Topology optimization for the seismic design of truss-like structures. Computers and Structures, 89 (7-8). 702 - 711. ISSN 0045-7949

Son, K.S., Hajirasouliha, I. and Pilakoutas, K. (2011) Strength and deformability of waste tyre rubber-filled reinforced concrete columns. Construction and Building Materials, 25 (1). 218 - 226. ISSN 0950-0618

Garcia, R., Hajirasouliha, I. and Pilakoutas, K. (2010) Seismic behaviour of deficient RC frames strengthened with CFRP composites. Engineering Structures, 32 (10). pp. 3075-3085. ISSN 0141-0296

Kim, G.B., Pilakoutas, K. and Waldron , P. (2008) Thin FRP/GFRC structural elements. Cement and Concrete Composites, 30 (2). pp. 122-137. ISSN 0958-9465

Neocleous, K., Tlemat, H. and Pilakoutas, K. (2006) Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires. Journal of Materials in Civil Engineering, 18 (5). pp. 677-685. ISSN 0899-1561

Tlemat, H., Pilakoutas, K. and Neocleous, K. (2006) Stress-strain characteristic of SFRC using recycled fibres. Materials and Structures/Materiaux et Constructions, 39 (3). pp. 365-377. ISSN 1359-5997

Tlemat, H., Pilakoutas, K. and Neocleous, K. (2006) Modelling of SFRC using inverse finite element analysis. Materials and Structures/Materiaux et Constructions, 39 (286). pp. 221-233. ISSN 1359-5997

Son, K.S., Pilakoutas, K. and Neocleous, K. (2006) Behaviour of concrete columns with drilled holes. Magazine of Concrete Research, 58 (7). pp. 411-419. ISSN 0024-9831

Achillides, Z. and Pilakoutas, K. (2006) FE modelling of bond interaction of FRP bars to concrete. Structural Concrete, 7 (1). pp. 7-16. ISSN 1464-4177

Neocleous, K., Pilakoutas, K. and Guadagnini, M. (2005) Failure-mode-hierarchy-based design for reinforced concrete structures. Structural Concrete, 6 (1). pp. 23-32. ISSN 1464-4177

Neocleous, K., Pilakoutas, K. and Waldron , P. (2004) Structural safety uncertainties in codes of practice for reinforced concrete. Structural Engineer, 82 (8). pp. 28-33. ISSN 1466-5123

Achillides, Z. and Pilakoutas, K. (2004) Bond behavior of fiber reinforced polymer bars under direct pullout conditions. Journal of Composites for Construction, 8 (2). pp. 173-181. ISSN 1090-0268

Pilakoutas, K., Neocleous, K. and Tlemat, H. (2004) Reuse of tyre steel fibres as concrete reinforcement. Proceedings of the ICE - Engineering Sustainability, 157 (3). pp. 131-138. ISSN 1478-4629

Pilakoutas, K. and Li, X. (2003) Alternative shear reinforcement for reinforced concrete flat slabs. Journal of Structural Engineering, 129 (9). pp. 1164-1172. ISSN 0733-9445

Mortazavi, A., Pilakoutas, K. and Son, K.S. (2003) RC column strengthening by lateral pre-tensioning of FRP. Construction and Building Materials, 17 (6-7). pp. 491-497. ISSN 0950-0618

El-Ghandour, A. W., Pilakoutas, K. and Waldron, P. (2003) Punching shear behavior of fiber reinforced polymers reinforced concrete flat slabs: experimental study. Journal of Composites for Construction, 7 (3). pp. 258-265. ISSN 1090-0268

Pesic, N. and Pilakoutas, K. (2003) Concrete beams with externally bonded flexural FRP-reinforcement: analytical investigation of debonding failure. Composites Part B: Engineering, 34 (4). pp. 327-338. ISSN 1359-8368

Pilakoutas, K., Neocleous, K. and Guadagnini, M. (2002) Design philosophy issues of fiber reinforced polymer reinforced concrete structures. Journal of Composites for Construction, 6 (3). pp. 154-161. ISSN 1090-0268

Book Section

Sianko, I., Garcia, R., Ozdemir, Z. et al. (2 more authors) (2019) Modelling of earthquake hazard and secondary effects for loss assessment in Marmara (Turkey). In: Durrani, T., Wang, W. and Forbes, S., (eds.) Geological Disaster Monitoring Based on Sensor Networks. Springer Natural Hazards . Springer Singapore , pp. 67-81. ISBN 9789811309915

Conference or Workshop Item

Imjai, T., Guadagnini, M. and Pilakoutas, K. (2015) Advanced Geosynthetics in Flexible Pavement: A Full-Scale Test and Numerical Study. In: USES 2015 - The University of Sheffield Engineering Symposium, 24 Jun 2015, The Octagon Centre, University of Sheffield.

Proceedings Paper

Mojtabaei, S.M., Papargyriou, I., Hajirasouliha, I. et al. (2 more authors) (2018) Development of cold-formed steel moment-resisting frames using optimum beams in seismic applications. In: 16th European conference on Earthquake Engineering. 16th European conference on Earthquake Engineering, 18-21 Jun 2018, Thessaloniki, Greece. EAEE / ETAM .

Figueiredo, F., Shah, A., Huang, S. orcid.org/0000-0003-2816-7104 et al. (3 more authors) (2017) Fire Protection of Concrete Tunnel Linings with Waste Tyre Fibres. In: Procedia Engineering. 6th International Workshop on Performance, Protection & Strengthening of Structures under Extreme Loading, PROTECT2017, 11-12 Dec 2017, Guangzhou (Canton), China. Elsevier , pp. 472-478.

Figueiredo, F., Rickard, I., Shah, A. et al. (5 more authors) (2017) Recycled tyre polymer fibres to mitigate heat- induced spalling of concrete. In: Proceedings from the 5th International Workshop on Concrete Spalling. 5th International Workshop on Concrete Spalling due to Fire Exposure, 12-13 Oct 2017, Borås, Sweden. SP Reports, 2017 (43). RISE Research Institutes of Sweden .

Al-Kamyani, Z., Pilakoutas, K., Guadagnini, M. et al. (1 more author) (2017) Free and Restrained Shrinkage of Hybrid Steel Fibre Reinforced Concrete. In: High Tech Concrete: Where Technology and Engineering Meet. fib Symposium 2017: High Tech Concrete: Where Technology and Engineering Meet, 12/06/2017 - 14/06/2017, Maastricht, The Netherlands. Springer , pp. 339-346. ISBN 978-3-319-59470-5

Figueiredo, F. orcid.org/0000-0001-5560-4969, Huang, S.S., Angelakopoulos, H. et al. (2 more authors) (2017) Mitigation of concrete spalling in fire using recycled fibres from waste tyres. In: IFireSS 2017 – 2nd International Fire Safety Symposium. 2nd International Fire Safety Symposium, 07-09 Jun 2017, Naples, Italy. Doppiavoce , pp. 589-594. ISBN 978-88-89972-67-0

Hu, H., Papastergiou, P., Angelakopoulos, H. et al. (2 more authors) (2017) Flexural performance of steel fibre reinforced concrete with manufactured and recycled tyre steel fibres. In: Construction Materials for Sustainable Future. 1st International Conference on Construction Materials for Sustainable Future, 19-21 Apr 2017, Zadar, Croatia. University of Zagreb, Faculty of Civil Engineering, Zagreb, Croatia , pp. 904-911. ISBN 978-953-8168-04-8

Papastergiou, P., Pilakoutas, K., Dritsos, S. et al. (1 more author) (2009) Experimental investigation of RC full scale frame strengthened at the joints and columns with fibre reinforced polymers. In: 16th Hellenic Concrete Conference. 16th Hellenic Concrete Conference, 21-23 Oct 2009, Paphos, Cyprus. Technical Chamber of Greece , 198 - 210.

Chaudat, T., Pilakoutas, K., Papastergiou, P. et al. (1 more author) (2006) Shaking Table Tests on RC Retrofitted Frame with FRP. In: First European Conference on Earthquake Engineering and Seismology 2006 (1st ECEES): Joint Event of the 13th European Conference on Earthquake Engineering and the 30th General Assembly of the European Seismological Commission. First European Conference on Earthquake Engineering and Seismology 2006 (1st ECEES), 03-08 Sep 2006, Geneva, Switzerland. Swiss Society for Earthquake Engineering and Structural Dynamics (SGEB) , Zurich, Switzerland , pp. 5372-5381. ISBN 978-1-61567-675-0