Items where authors include "Mumtaz, K."

Article

Yang, Y., Aydin, A., Mumtaz, K. orcid.org/0000-0001-8083-1661 et al. (3 more authors) (2025) Novel use of laser melting and optical pre-heat to control white etching layer formation on rail steels. Tribology International, 204. 110472. ISSN 0301-679X

Erman, S.C., Aydin, A., Groom, K. et al. (1 more author) (2025) Diode area melting of SS316L using low power 450 nm lasers. The International Journal of Advanced Manufacturing Technology, 136. pp. 4471-4490. ISSN 0268-3768

Genç, K. orcid.org/0009-0008-7977-4469, Todd, I. and Mumtaz, K. orcid.org/0000-0001-8083-1661 (2025) Influence of heat treatment on microstructure and magnetic properties of laser powder bed fusion generated NdFeB magnets. Progress in Additive Manufacturing. ISSN 2363-9512

Aydin, A. orcid.org/0009-0007-3212-8040, Cetin, E., Erman, S.C. orcid.org/0000-0002-9615-5618 et al. (1 more author) (2025) Laser powder bed fusion of Ti6Al4V using low-cost high efficiency 450 nm diode point melting. Journal of Materials Research and Technology, 34. pp. 2814-2827. ISSN 2238-7854

Caglar, H. orcid.org/0009-0001-4800-0064, Aydin, A. orcid.org/0009-0007-3212-8040, Gulenc, I.T. orcid.org/0000-0001-5163-9478 et al. (2 more authors) (2024) Dual-laser powder bed fusion using 450 nm diode area melting and 1064 nm galvo-scanning fiber laser sources. Materials & Design, 248. 113511. ISSN 0264-1275

Paul, S. orcid.org/0000-0001-8990-0539, Smith, P.J. and Mumtaz, K. orcid.org/0000-0001-8083-1661 (2024) Use of aqueous polyvinyl alcohol in binder jetting of Inconel 718. The International Journal of Advanced Manufacturing Technology, 135 (5-6). pp. 2355-2372. ISSN 0268-3768

Genç, K. orcid.org/0009-0008-7977-4469, Toyting, S., Galindo-Nava, E. et al. (2 more authors) (2024) Laser powder bed fusion of NdFeB and influence of powder bed heating on density and magnetic properties. The International Journal of Advanced Manufacturing Technology, 132 (9-10). pp. 5017-5038. ISSN 0268-3768

Pedrazzini, S., Pek, M.E., Ackerman, A.K. et al. (11 more authors) (2023) Effect of substrate bed temperature on solute segregation and mechanical properties in Ti–6Al–4V produced by laser powder bed fusion. Metallurgical and Materials Transactions A, 54 (8). pp. 3069-3085. ISSN 1073-5623

Karaş, B., Smith, P.J., Fairclough, J.P.A. orcid.org/0000-0002-1675-5219 et al. (1 more author) (2022) Additive manufacturing of high density carbon fibre reinforced polymer composites. Additive Manufacturing, 58. 103044. ISSN 2214-8604

Alsaddah, M., Khan, A., Groom, K. orcid.org/0000-0001-6431-6598 et al. (1 more author) (2022) Diode area melting of Ti6Al4V using 808 nm laser sources and variable multi-beam profiles. Materials and Design, 215. 110518. ISSN 0264-1275

Karaş, B., Beedasy, V., Leong, Z. et al. (3 more authors) (2021) Integrated fabrication of novel inkjet-printed silver nanoparticle sensors on carbon fiber reinforced nylon composites. Micromachines, 12 (10). 1185. ISSN 2072-666X

Alsaddah, M., Khan, A., Groom, K. orcid.org/0000-0001-6431-6598 et al. (1 more author) (2021) Use of 450-808 nm diode lasers for efficient energy absorption during powder bed fusion of Ti6Al4V. The International Journal of Advanced Manufacturing Technology, 113 (9-10). pp. 2461-2480. ISSN 0268-3768

Pedrazzini, S., Pek, M.E., Ackerman, A.K. et al. (10 more authors) (2020) Influence of powder-bed temperature on the microstructure and mechanical properties of Ti-6Al-4V produced by selective laser melting. arXiv. (Submitted)

Ali, H., Ghadbeigi, H., Hosseinzadeh, F. et al. (2 more authors) (2019) Effect of pre-emptive in-situ parameter modification on residual stress distributions within selective laser melted Ti6Al4V components. International Journal of Advanced Manufacturing Technology, 103 (9-12). pp. 4467-4479. ISSN 0268-3768

Martinez, R., Todd, I. orcid.org/0000-0003-0217-1658 and Mumtaz, K. orcid.org/0000-0001-8083-1661 (2019) In situ alloying of elemental Al-Cu12 feedstock using selective laser melting. Virtual and Physical Prototyping, 14 (3). pp. 242-252. ISSN 1745-2759

Ali, H., Ma, L., Ghadbeigi, H. et al. (1 more author) (2017) In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 695. pp. 211-220. ISSN 0921-5093

Harrison, N., Todd, I and Mumtaz, K. (2017) Thermal expansion coefficients in Invar processed by selective laser melting. Journal of Materials Science. ISSN 0022-2461

Proceedings Paper

Cetin, E., Aydin, A., Erman, C. et al. (1 more author) (2024) Multi-laser powder bed fusion of Cu10Sn using low-power 450nm diode lasers. In: Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 35th Annual International Solid Freeform Fabrication Symposium (SFF2024), 11-14 Aug 2024, Austin, Texas, USA. Laboratory for Freeform Fabrication and University of Texas at Austin , pp. 1302-1317.

Erman, C., Aydin, A., Liang, A. et al. (1 more author) (2024) Parametric investigation of single-layer stainless steel 316L with novel laser powder bed fusion technology: diode area melting with 450 nm blue lasers. In: Proceedings of the 35th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. 35th Annual International Solid Freeform Fabrication Symposium (SFF2024), 11-14 Aug 2024, Austin, Texas, USA. Laboratory for Freeform Fabrication and University of Texas at Austin , pp. 1329-1342.

Caglar, H., Liang, A. and Mumtaz, K. orcid.org/0000-0001-8083-1661 (2023) Multiple 450 nm diode laser processing of TI64 powder. In: Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium. 34th Annual International Solid Freeform Fabrication Symposium (SFF2023), 14-16 Aug 2023, Austin, Texas, USA. Laboratory for Freeform Fabrication and University of Texas at Austin , pp. 1265-1278.

Alharbi, A., Khan, A., Todd, I. et al. (2 more authors) (2021) Semisolid heat treatment processing window of Pb-40% Sn alloy for feedstock in the 3D printing thixo-forming process. In: Materials Today: Proceedings. 1st International Conference on Computations in Materials and Applied Engineering, 01-02 May 2021, Uttarakhand, India. Elsevier .