Huang, M, Gao, X, Pan, J et al. (4 more authors) (2022) Optimizing Color-Difference Formulas for 3D-Printed Objects. Sensors, 22 (22). 8869. ISSN 1424-8220
Abstract
Based on previous visual assessments of 440 color pairs of 3D-printed samples, we tested the performance of eight color-difference formulas (CIELAB, CIEDE2000, CAM02-LCD, CAM02-SCD, CAM02-UCS, CAM16-LCD, CAM16-SCD, and CAM16-UCS) using the standardized residual sum of squares (STRESS) index. For the whole set of 440 color pairs, the introduction of kL (lightness parametric factor), b (exponent in total color difference), and kL + b produced an average STRESS decrease of 2.6%, 26.9%, and 29.6%, respectively. In most cases, the CIELAB formula was significantly worse statistically than the remaining seven formulas, for which no statistically significant differences were found. Therefore, based on visual results using 3D-object colors with the specific shape, size, gloss, and magnitude of color differences considered here, we concluded that the CIEDE2000, CAM02-, and CAM16-based formulas were equivalent and thus cannot recommend only one of them. Disregarding CIELAB, the average STRESS decreases in the kL + b-optimized formulas from changes in each one of the four analyzed parametric factors were not statistically significant and had the following values: 6.2 units changing from color pairs with less to more than 5.0 CIELAB units; 2.9 units changing the shape of the samples (lowest STRESS values for cylinders); 0.7 units changing from nearly-matte to high-gloss samples; and 0.5 units changing from 4 cm to 2 cm samples.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). |
Keywords: | color difference; 3D color printing; CIEDE2000; CIECAM02; CIECAM16 |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Arts, Humanities and Cultures (Leeds) > School of Design (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 08 Dec 2022 16:35 |
Last Modified: | 08 Dec 2022 16:35 |
Published Version: | http://dx.doi.org/10.3390/s22228869 |
Status: | Published |
Publisher: | MDPI |
Identification Number: | 10.3390/s22228869 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:193809 |