Folena, M, Barker, R, Pessu, F orcid.org/0000-0003-3587-4309 et al. (2 more authors) (2020) CO2 Top-of-line-corrosion; assessing the role of acetic acid on general and pitting corrosion. Corrosion. 3569. ISSN 0010-9312
Abstract
Based on a review of both literature and field data, it is apparent that the role of acetic acid (HAc) in oilfield brines is both extremely complex and somewhat controversial. Although it is commonly believed that the presence of this organic compound enhances both the general and the localized corrosion rate of carbon steel, HAc has recently been reported to also act as a weak general corrosion inhibitor in specific aqueous environments. These observations prompted a study into whether such behavior is apparent in a CO<sub>2</sub> top-of-line corrosion (TLC) scenario i.e. when HAc dissolves into condensed water which forms on the upper internal wall of carbon steel pipelines during wet-gas stratified flow. Four different water condensation rates/temperature TLC conditions were selected to investigate the role of HAc on both the kinetics and mechanism of carbon steel dissolution. A miniature three-electrode setup was developed to characterize the real-time TLC response through the implementation of electrochemical measurements. Surface analysis techniques (microscopy and profilometry) were also performed to complement the electrochemical results. Collective consideration of the corrosion response and condensate chemistry indicates that similar effects were observed compared to those reported in the literature for bulk aqueous environments, in that the introduction of HAc can result in either accentuation or a minimal/inhibitive effect on general corrosion depending upon the operating conditions. The minimal/inhibitive effects of HAc were apparent at a surface temperature of 20.5<sup>o</sup>C and water condensation rate of 0.5ml/m<sup>2</sup>.s as no significant increase in corrosion was observed despite a significant reduction in condensate pH being generated due to the presence of HAc. X-ray photo-electron spectroscopy analysis of the inhibited steel specimen in the presence of HAc revealed the presence of iron acetate on the steel surface which may have been at least partially responsible for the observed inhibitive effect. Extended duration experiments over 96h revealed that both general and localized corrosion are not significantly affected by HAc addition at low temperature whilst the level of degradation increases at higher surface temperature over longer periods.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | This item is protected by copyright, all rights reserved. This is an author produced version of an article published in Corrosion. Uploaded in accordance with the publisher's self-archiving policy. |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Mechanical Engineering (Leeds) > Institute of Functional Surfaces (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 18 Feb 2021 10:57 |
Last Modified: | 28 Feb 2021 01:38 |
Status: | Published online |
Publisher: | NACE International |
Identification Number: | 10.5006/3569 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:171295 |