Xu, D, Wang, C, Espejo, C et al. (3 more authors) (2018) Understanding the Friction Reduction Mechanism Based on Molybdenum Disulfide Tribofilm Formation and Removal. Langmuir, 34 (45). pp. 13523-13533. ISSN 0743-7463
Abstract
Among friction modifier lubricant additives, molybdenum dialkyldithiocarbamate (MoDTC) provides excellent friction behavior in boundary lubricated tribocontacts. It is well established that the low friction obtained with MoDTC is as a result of the formation of lattice structure MoS₂ nanosheets. However, the relationship between the molybdenum species quantity, its distribution on the contact surface, and the friction behavior is not yet fully understood. In this work, Raman microscopy and atomic force microscopy (AFM) have been used with the aim of understanding the link between the friction behavior and the MoDTC/ZDDP tribofilm formation and removal. Tribotests were coupled with a collection of ex-situ Raman intensity maps to analyze the MoS₂ tribofilm buildup. Post-test AFM analyses were implemented on the ball wear scar to acquire the average MoDTC/ZDDP tribofilm thickness. In-situ Raman spectra analyses were carried out to detect the MoS₂ tribofilm removal. A good correlation was achieved between the friction coefficient measurements and Raman maps when using a linear relationship between the microscopic friction and the local amount of MoS₂ tribofilm. After a rapid increase, the average MoDTC/ZDDP tribofilm thickness levels out to a steady state as the friction drop ceases. The removal rate of MoS₂ from tribofilms, obtained at different temperatures, suggests that the MoS₂ tribofilms are much easier to remove from tribocontacts compared to antiwear ZDDP tribofilms. This is the first study that sets out a framework to link MoS₂ amount and coverage to the friction behavior, providing the basis for developing numerical models capable of predicting friction by taking into account tribochemistry processes.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2018 American Chemical Society. This is an author produced version of a paper published in Langmuir. Uploaded in accordance with the publisher's self-archiving policy. |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Mechanical Engineering (Leeds) > Institute of Functional Surfaces (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 14 Dec 2018 13:25 |
Last Modified: | 22 Oct 2019 00:39 |
Status: | Published |
Publisher: | American Chemical Society |
Identification Number: | 10.1021/acs.langmuir.8b02329 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:139975 |