Items where authors include "Morina, A."

Article

Xu, N., Wang, D., Taylor, C.M. orcid.org/0000-0002-1325-7804 et al. (6 more authors) (2026) Adhesive layer formation and its dual role in tribological performance and surface integrity of Ti-6Al-4V: implications for the machining process. Tribology International, 214, Part B. JTRI_111228. ISSN 0301-679X

Homayoonfard, M., Schroeder, S.L.M. orcid.org/0000-0002-4232-5378, Dowding, P. et al. (1 more author) (2025) Glycerol oleate tribofilms: Relationships between chemical composition and tribological performance. Tribology International, 212. 110915. ISSN 0301-679X

Yuan, Y., Wang, C. orcid.org/0000-0002-4301-3974, Lee, S. orcid.org/0000-0002-0797-1446 et al. (2 more authors) (2025) Evaluation of nanoparticles for nanoscale film fabrication harnessing tribochemistry. Tribology International, 210. 110805. ISSN 0301-679X

Dhakal, N. orcid.org/0000-0002-9346-7229, Espejo, C., Morina, A. orcid.org/0000-0001-8868-2664 et al. (1 more author) (2025) Microstructure and thermal properties of nano-SiO₂ reinforced 3D printed multiscale PEEK composites. Composites Part B: Engineering, 303. 112599. ISSN 1359-8368

Lodhi, A.P.S., Al Sheikh Omar, A., Wang, C. orcid.org/0000-0002-4301-3974 et al. (2 more authors) (2025) Effect of lubricant contamination with water on friction modifier properties. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ISSN 1350-6501

Alves, S.M., Cunha, R.D. and Morina, A. orcid.org/0000-0001-8868-2664 (2025) Tribological Behaviour of Cuo@Rgo Nanoparticles Under Different Slide-To-Roll. Tribology Letters, 73. 120. ISSN 1023-8883

Guo, H., Li, Y., Zhao, B. et al. (4 more authors) (2025) Transient dynamic characteristics of floating bush structure of marine high pressure fuel pump. Physics of Fluids, 37 (8). 083603. ISSN 1070-6631

Zhang, B., Ge, C., Xu, X. et al. (4 more authors) (2025) Evolution mechanism of wear characteristics of cylinder liner and piston ring under starved lubrication condition. Tribology International, 208. 110622. ISSN 0301-679X

Mehtab, R., Zulkifli, N.W.B.M., Bin Mohd Sabri, M.F. et al. (5 more authors) (2025) Tribological properties of oil palm fiber-derived graphene coatings on piston ring; influence of hydrogen flow rate during CVD process. Wear, 572-573. 206054. ISSN 0043-1648

Haneef, M. orcid.org/0000-0002-9930-456X, Evaristo, M., Yang, L. orcid.org/0000-0003-0935-3921 et al. (2 more authors) (2025) Wear control and friction reduction in newly developed multilayer Mg-DLC coatings using organic base oil and sustainable lubrication additives. Wear, 572–573. 206067. ISSN 0043-1648

Alenezi, A.N., Espejo, C., Arnoux, Q. et al. (3 more authors) (2025) The effect of combustion on MoDTC friction reduction capabilities determined by engine tests. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology. ISSN 1350-6501

Al Sheikh Omar, A., Ahmad, K., Lodhi, A.P.S. et al. (3 more authors) (2025) APTES nanofilm manufacturing using sliding interfaces. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology. ISSN 1350-6501

Xu, D., Espejo, C., Wang, C. orcid.org/0000-0002-4301-3974 et al. (1 more author) (2025) Modelling Friction Reduction Based on Molybdenum Disulphide Tribofilm Formation and Removal in Boundary Lubrication. Tribology Letters, 73 (2). 46. ISSN 1023-8883

Zhang, B., Ma, X., Liu, L. et al. (2 more authors) (2025) Sliding wear mechanisms and speed-load wear map of cylinder liner and piston ring under lubricated conditions. Wear, 564-565. 205701. ISSN 0043-1648

Saharudin, M.F., Zulkifli, N.W.M., Goh, Y. et al. (3 more authors) (2025) Investigation of the tribological and mechanical properties of FeCrMoCB coating on AISI 52100 Bearing steel. Tribology International, 203. 110401. ISSN 0301-679X

Haneef, M., Evaristo, M., Yang, L. orcid.org/0000-0003-0935-3921 et al. (2 more authors) (2025) Achieving Superlubricity: Development of Multilayer Co-Doped DLC Coatings and Tribological Evaluation with Eco-Friendly Base Oil and Low-SAPS Oil Formulations. Materials, 18 (4). 847. ISSN 1996-1944

Ihara, L., Wu, G. orcid.org/0000-0003-0795-8898, Cavaleiro, A. et al. (2 more authors) (2025) Environmental Impact of Physical Vapour Deposition and Plasma-Enhanced Chemical Vapour Deposition Technologies for Deposition of Diamond-like Carbon Coatings for Green Tribology. Coatings, 15 (2). 218. ISSN 2079-6412

Piya, A.K., Yang, L. orcid.org/0000-0003-0935-3921, Emami, N. et al. (1 more author) (2025) Effect of Nanodiamonds on Friction Reduction Performance in Presence of Organic and Inorganic Friction Modifiers. Lubricants, 13 (1). 1. ISSN 2075-4442

Haneef, M., Yang, L. orcid.org/0000-0003-0935-3921, Morina, A. et al. (1 more author) (2025) Superlubricity of multilayer titanium doped DLC coatings by using low SAPS organic additives in base oil. Tribology International, 201. 110186. ISSN 0301-679X

Duston, S., Oliver, R., Kubiak, K.J. orcid.org/0000-0002-6571-2530 et al. (3 more authors) (2024) Tribological manufacturing of ZDDP tribofilms functionalised by graphene nanoplatelets. Journal of Physics: Materials. ISSN 2515-7639

Al Sheikh Omar, A., Salehi, F.M., Farooq, U. et al. (1 more author) (2024) Additives Depletion by Water Contamination and Its Influences on Engine Oil Performance. Tribology Letters, 72 (3). 74. ISSN 1023-8883

Nadeem, I., Finšgar, M. orcid.org/0000-0002-8302-9284, Dražić, G. et al. (3 more authors) (2024) Robust and durable superlubricity enabled by carboxylated graphene quantum dots in lubricated steel contacts. Carbon, 226. 119226. ISSN 0008-6223

Shu, J., Espejo, C., Kalin, M. et al. (1 more author) (2024) Tribological performance of fatty acid, acid/amine additive mixture and ionic liquid. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ISSN 1350-6501

Dhakal, N. orcid.org/0000-0002-9346-7229, Espejo, C., Morina, A. orcid.org/0000-0001-8868-2664 et al. (1 more author) (2024) Tribological performance of 3D printed neat and carbon fiber reinforced PEEK composites. Tribology International, 193. 109356. ISSN 0301-679X

Shu, J., Espejo, C., Kalin, M. et al. (1 more author) (2024) Synergism between bio-based oleate ester and low-concentration ZDDP under reciprocating contacts. Tribology International, 192. 109252. ISSN 0301-679X

Haneef, M., Evaristo, M., Morina, A. orcid.org/0000-0001-8868-2664 et al. (2 more authors) (2024) New nanoscale multilayer magnetron sputtered Ti-DLC/DLC coatings with improved mechanical properties. Surface and Coatings Technology, 480. 130595. ISSN 0257-8972

Zhang, B., Ma, X., Liu, L. et al. (4 more authors) (2024) Reciprocating sliding friction behavior and wear state transition mechanism of cylinder liner and piston ring. Wear, 546-547. 205293. ISSN 0043-1648

Abd Rahman, F.H., Amiruddin, H., Abdollah, M.F.B. et al. (6 more authors) (2024) Synthesising graphene with renewably-sourced bio-carbon precursors: a brief review. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46. 173. ISSN 1678-5878

Xu, N. orcid.org/0000-0002-8291-6519, Wang, C. orcid.org/0000-0002-4301-3974, Tang, Y. et al. (2 more authors) (2024) Constructing wear-sensing coating system with in-service monitoring potential. Tribology International, 193. 109403. ISSN 0301-679X

Xu, N. orcid.org/0000-0002-8291-6519, Wang, C. orcid.org/0000-0002-4301-3974, Wang, D. et al. (2 more authors) (2024) Coating sensing strategy for understanding the governing factors of tribofilm growth on diamond-like carbon. Tribology International, 192. 109335. ISSN 0301-679X

Piya, A.K. orcid.org/0000-0002-1417-5480, Yang, L. orcid.org/0000-0003-0935-3921, Omar, A.A.S. orcid.org/0000-0002-0159-4467 et al. (2 more authors) (2023) Synergistic lubrication mechanism of nanodiamonds with organic friction modifier. Carbon, 218. 118742. ISSN 0008-6223

Straiton, A.J. orcid.org/0000-0001-5956-8598, Kathyola, T.A. orcid.org/0000-0003-1752-7469, Sweeney, C. et al. (7 more authors) (2023) Green Alternatives to Zinc Dialkyldithiophosphates: Vanadium Oxide-Based Additives. ACS Applied Engineering Materials, 1 (11). pp. 2916-2925. ISSN 2771-9545

Al Sheikh Omar, A. orcid.org/0000-0002-0159-4467, Salehi, F.M., Bai, M. orcid.org/0000-0002-6267-9771 et al. (2 more authors) (2023) In situ nanocompression of carbon black to understand the tribology of contaminated diesel engine oils. Carbon, 212. 118170. ISSN 0008-6223

Wang, J., Han, B., Chen, Z. et al. (4 more authors) (2023) Investigation on the Tribological Properties of FeS, Cu2S, MoS2, and WS2 Sulfide Films Under Water Lubrication. Tribology Transactions, 66 (3). pp. 551-564. ISSN 1040-2004

Gong, Y., Morina, A. orcid.org/0000-0001-8868-2664, Wang, C. orcid.org/0000-0002-4301-3974 et al. (5 more authors) (2022) Experimental and numerical study on wear characteristics of steel surfaces involving the tribochemistry of a fully formulated oil. Part I: Experiments. Tribology International, 176. 107888. ISSN 0301-679X

Wang, Y. orcid.org/0000-0002-0830-4434, Li, C., Du, J. et al. (1 more author) (2022) Understanding the Influences of Multiscale Waviness on the Elastohydrodynamic Lubrication Performance, Part I: The Full-Film Condition. Lubricants, 10 (12). 368. ISSN 2075-4442

Thornley, A., Wang, Y. orcid.org/0000-0002-0830-4434, Wang, C. orcid.org/0000-0002-4301-3974 et al. (5 more authors) (2022) Optimizing the Mo concentration in low viscosity fully formulated oils. Tribology International, 168. 107437. ISSN 0301-679X

Wang, Y. orcid.org/0000-0002-0830-4434, Azam, A. orcid.org/0000-0002-3510-1333, Wilson, M.C.T. orcid.org/0000-0002-1058-2003 et al. (2 more authors) (2022) A comparative study for selecting and using simulation methods of Gaussian random surfaces. Tribology International, 166. 107347. ISSN 0301-679X

ELTahry, O., Salehi, F.M., Morina, A. orcid.org/0000-0001-8868-2664 et al. (4 more authors) (2021) Chemical Analysis of Deposits Separated from Blocked Fuel Filters. SAE International Journal of Fuels and Lubricants, 15 (1). pp. 29-41. ISSN 1946-3952

Liskiewicz, T., Morina, A. and Neville, A. (2008) Challenges in lubricant additives technology. The Triz, Feb.

Liskiewicz, T., Morina, A. and Neville, A. (2008) Friction in nature. WIT Transactions on Ecology and the Environment : Design and Nature IV, 114. pp. 263-272. ISSN 1743-3541

Taylor, G., Liskiewicz, T., Morina, A. et al. (3 more authors) (2008) Investigation of adhesion forces at the peritoneal surface. WIT Transactions on Ecology and the Environment, 114. pp. 273-280. ISSN 1743-3541

Neville, A., Morina, A., Liskiewicz, T. et al. (1 more author) (2007) Synovial joint lubrication – does nature teach more effective engineering lubrication strategies? Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (10). pp. 1223-1230. ISSN 0954-4062

Morina, A., Liskiewicz, T. and Neville, A. (2006) Designing new lubricant additives using biomimetics. WIT Transactions on Ecology and the Environment, 87. pp. 157-166. ISSN 1743-3541

Proceedings Paper

Taylor, C.M. orcid.org/0000-0002-1325-7804, Cook, I., Secker, J. et al. (3 more authors) (2025) Characterising resource usage for a supercritical carbon dioxide cooling and lubricating system used in machining processes. In: Mativenga, P. and Gallego-Schmid, A., (eds.) Procedia CIRP. 32nd CIRP Conference on Life Cycle Engineering (LCE2025), 07-09 Apr 2025, Manchester, UK. Elsevier , pp. 1186-1192.

Taylor, G., Liskiewicz, T., Neville, A. et al. (3 more authors) (2009) Providing adhesion for a miniture mobile intra-abdominal device based on biomimetic principles. In: Proceedings of 3rd Vienna International Conference on Nano-Technology. Viennano'09, 18-20 March, Vienna, Austria. , pp. 401-407. ISBN 978-3-901657-32-0