Items where authors include "Marshall, M.B."

Article

Mesaritis, M., Shamsa, M., Cuervo, P. et al. (4 more authors) (2020) A laboratory demonstration of rail grinding and analysis of running roughness and wear. Wear, 456-457. 203379. ISSN 0043-1648

Fuentes, R., Dwyer-Joyce, R.S. orcid.org/0000-0001-8481-2708, Marshall, M.B. orcid.org/0000-0003-3038-4626 et al. (2 more authors) (2020) Detection of sub-surface damage in wind turbine bearings using acoustic emissions and probabilistic modelling. Renewable Energy, 147 (1). pp. 776-797. ISSN 0960-1481

Zhang, B. and Marshall, M.B. orcid.org/0000-0003-3038-4626 (2019) Investigating material removal mechanism of an Al-Si base abradable coating in labyrinth seal system. Wear, 426-427. pp. 239-249. ISSN 0043-1648

Stephen, J.T., Hardwick, C., Beaty, P. et al. (2 more authors) (2019) Ultrasonic monitoring of insulated block joints. Proceedings of the Institution of Mechanical Engineers. Part F: Journal of Rail and Rapid Transit, 233 (3). pp. 251-261. ISSN 0954-4097

Alhadeff, L.L., Marshall, M.B. orcid.org/0000-0003-3038-4626 and Slatter, T. orcid.org/0000-0002-0485-4615 (2019) Wear data for trials machining brass, titanium grade 2 and Hastelloy in order to characterize wear of micro-tools. Data Brief, 22. pp. 574-577. ISSN 2352-3409

Reid, A., Martinez, I., Marshall, M.B. orcid.org/0000-0003-3038-4626 et al. (5 more authors) (2018) Mapping of axial plastic zone for roller bearing overloads using neutron transmission imaging. Materials and Design, 156. pp. 103-112. ISSN 0264-1275

Zhang, B. and Marshall, M.B. (2018) Investigating the Application of a Honeycomb Abradable Lining in the Turbine Stage of an Aero-Engine. Tribology International, 125. pp. 66-74. ISSN 0301-679X

Watson, M. and Marshall, M.B. (2018) Wear mechanisms at the blade tip seal interface. Wear, 404-05. pp. 176-193. ISSN 0043-1648

Gill, W.S., Marshall, M.B., Lewis, R. et al. (2 more authors) (2018) Failure analysis of pipeline indents using steel precision balls under subsea conditions. Tribology International, 118. pp. 524-537. ISSN 0301-679X

Watson, M. and Marshall, M.B. (2017) A Novel Image Segmentation Approach for Microstructure Modelling. Coatings, 7 (10). 166. ISSN 2079-6412

Mostafavi, M., Collins, D.M., Peel, M.J. et al. (6 more authors) (2017) Dynamic contact strain measurement by time-resolved stroboscopic energy dispersive synchrotron X-ray diffraction. Strain. e12221. ISSN 0039-2103

Fois, N., Watson, M. and Marshall, M.B. (2017) The influence of material properties on the wear of abradable materials. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231 (2). pp. 240-253. ISSN 1350-6501

Tronci, G. and Marshall, M.B. (2016) Understanding the Behaviour of Silver as a Low Friction Coating in Aerospace Fasteners. Tribology International, 100. pp. 162-170. ISSN 1879-2464

Beaty, P., Temple, B., Marshall, M.B. et al. (1 more author) (2016) Experimental modelling of lipping in insulated rail joints and investigation of rail head material improvements. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit , 230 (4). pp. 1375-1387. ISSN 0954-4097

Merino Perez, J.L., Royer, R., Merson, E. et al. (3 more authors) (2016) Influence of workpiece constituents and cutting speed on the cutting forces developed in the conventional drilling of CFRP composites. Composite Structures, 140. pp. 621-629. ISSN 1879-1085

Suzuki, H., Marshall, M.B., Sims, N.D. et al. (1 more author) (2016) Design and implementation of a non-resonant vibration-assisted machining device to create bespoke surface textures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Singleton, R., Marshall, M.B., Lewis, R. et al. (1 more author) (2015) Rail grinding for the 21st century - Taking a lead from the aerospace industry. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (5). 457 - 465. ISSN 0954-4097

Mohammed, A., Marshall, M.B. and Lewis, R. (2015) Development of a method for assessing erosive wear damage on dies used in aluminium casting. Wear, 332. pp. 1215-1224. ISSN 0043-1648

Fois, N., Watson, M., Stringer, J. et al. (1 more author) (2015) An investigation of the relationship between wear and contact force for abradable materials. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , 229 (2). pp. 136-150. ISSN 1350-6501

Watson, M., Fois, N. and Marshall, M.B. (2015) Effects of blade surface treatments in tip – shroud abradable contacts. Wear. ISSN 1873-2577

Vail, J.R., Mills, R.S., Stephen, J.T. et al. (2 more authors) (2013) An ultrasonic method for measuring fluid penetration rate into threaded contacts. Tribology International, 67. pp. 21-26. ISSN 0301-679X

Lewis, R., Yoxall, A., Marshall, M.B. et al. (1 more author) (2007) Characterising pressure and bruising in apple fruit. Wear, 264 (1-2). pp. 37-46. ISSN 0043-1648

Marshall, M.B., Lewis, R., Dwyer-Joyce, R.S. et al. (2 more authors) (2006) Experimental characterization of wheel-rail contact patch evolution. Journal of Tribology, 128 (3). pp. 493-504. ISSN 0742 4787

Marshall, M.B., Lewis, R. and Dwyer-Joyce, R.S. (2006) Characterisation of contact pressure distribution in bolted joints. Strain, 42 (1). pp. 31-43. ISSN 00392103

Lewis, R., Marshall, M.B. and Dwyer-Joyce, R.S. (2005) Measurement of interface pressure in interference fits. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 219 (2). pp. 127-139. ISSN 0954-4062

Marshall, M.B., Lewis, R., Drinkwater, B.W. et al. (1 more author) (2004) An ultrasonic approach for contact stress mapping in machine joints and concentrated contacts. Journal of Strain Analysis for Engineering Design, 39 (4). pp. 339-350. ISSN 0309-3247

Proceedings Paper

Alhadeff, L.L., Curtis, D.T. orcid.org/0000-0001-6402-6996, Marshall, M.B. orcid.org/0000-0003-3038-4626 et al. (1 more author) (2018) The Application of Wire Electrical Discharge Machining (WEDM) in the Prototyping of Miniature Brass Gears. In: Procedia CIRP. 8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 Jun 2018, Budapest, Hungary. Elsevier , pp. 642-645.

Fuentes, R., Howard, T., Marshall, M.B. et al. (4 more authors) (2015) Detecting Damage on Wind Turbine Bearings Using Acoustic Emissions and Gaussian Process Latent Variable Models. In: Structural Health Monitoring 2015: System Reliability for Verification and Implementation. 10th International Conference Workshop on Structural Health Monitoring 2015, 01-03 Sep 2015, Stanford University Stanford, CA, USA. DEStech Publications, Inc. , Lancaster, PA , 2302 - 2309. ISBN 9781605952758

Naumann, J.R., Dwyer-Joyce, R.S. and Marshall, M.B. (2013) Damage detection in rolling element bearings by acoustic emission outlier analysis. In: 5th World Tribology Congress, WTC 2013. 5th World Tribology Conference, 08-13 Sep 2013, Torino, Italy. Politecnico di Torino ( DIMEAS ) , pp. 1810-1813. ISBN 9781634393522

Marshall, M.B., Lewis, R. and Dwyer-Joyce, R.S. (2005) The application of ultrasound as a tool for studying contact stresses in railway engineering component contacts. In: Proceedings of the 2005 ASME/IEEE Joint Rail Conference. ASME/IEEE 2005 Joint Rail Conference, March 16–18, 2005, Pueblo, Colorado, USA. ASME , pp. 83-88.