Items where authors include "Hare, C"

Article

Hare, C, Ghadiri, M orcid.org/0000-0003-0479-2845 and Wu, C-Y (2021) Discrete element modelling of ribbon milling: A comparison of approaches. Powder Technology, 388. pp. 63-69. ISSN 0032-5910

Zafar, U, Hare, C, Hassanpour, A orcid.org/0000-0002-7756-1506 et al. (1 more author) (2021) Assessing powder flowability at low stresses using ball indentation method: Evaluation of constraint factor. Powder Technology, 387. pp. 287-294. ISSN 0032-5910

Siriluck, S, Zafar, U, Hare, C et al. (5 more authors) (2021) Influence of mechanical properties on milling of amorphous and crystalline silica-based solids. Powder Technology. ISSN 0032-5910

Zafar, U, Hare, C, Hassanpour, A et al. (1 more author) (2020) Effect of strain rate on powder flow behaviour using ball indentation method. Powder Technology. ISSN 0032-5910

Stavrou, AG, Hare, C, Hassanpour, A orcid.org/0000-0002-7756-1506 et al. (1 more author) (2020) Investigation of powder flowability at low stresses: Influence of particle size and size distribution. Powder Technology, 364. pp. 98-114. ISSN 0032-5910

Stavrou, AG, Hare, C, Hassanpour, A orcid.org/0000-0002-7756-1506 et al. (1 more author) (2020) Investigation of powder flowability at low stresses by DEM modelling. Chemical Engineering Science, 211. 115307. ISSN 0009-2509

Ghadiri, M orcid.org/0000-0003-0479-2845, Pasha, M, Nan, W et al. (7 more authors) (2020) Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis. KONA Powder and Particle Journal, 37. pp. 3-18. ISSN 0288-4534

Dennis, M, Mead, G, Forbes, J et al. (1294 more authors) (2019) Effects of fluoxetine on functional outcomes after acute stroke (FOCUS): a pragmatic, double-blind, randomised, controlled trial. The Lancet, 393 (10168). pp. 265-274. ISSN 0140-6736

Hare, C, Bonakdar, T, Ghadiri, M orcid.org/0000-0003-0479-2845 et al. (1 more author) (2018) Impact breakage of pharmaceutical tablets. International Journal of Pharmaceutics, 536 (1). pp. 370-376. ISSN 0378-5173

Fulchini, F, Zafar, U, Hare, C et al. (4 more authors) (2017) Relationship between Surface Area Coverage of Flow-Aids and Flowability of Cohesive Particles. Powder Technology, 322. pp. 417-427. ISSN 0032-5910

Hare, C, Zafar, U, Ghadiri, M et al. (3 more authors) (2017) Analysis of the Dynamics of the FT4 Powder Rheometer (vol 285, pg 123, 2015). Powder Technology, 315. pp. 37-38. ISSN 0032-5910

Zafar, U, Hare, C, Hassanpour, A orcid.org/0000-0002-7756-1506 et al. (1 more author) (2017) Ball Indentation on Powder Beds for Assessing Powder Flowability: Analysis of Operation Window. Powder Technology, 310. pp. 300-306. ISSN 0032-5910

Pasha, M, Hare, C, Ghadiri, M orcid.org/0000-0003-0479-2845 et al. (2 more authors) (2017) Inter-Particle Coating Variability in a Rotary Batch Seed Coater. Chemical Engineering Research and Design, 120. pp. 92-101. ISSN 0263-8762

Pasha, M, Hare, C, Ghadiri, M orcid.org/0000-0003-0479-2845 et al. (2 more authors) (2016) Effect of particle shape on flow in discrete element method simulation of a rotary batch seed coater. Powder Technology, 296. pp. 29-36. ISSN 0032-5910

Hare, C, Ghadiri, M orcid.org/0000-0003-0479-2845, Guillard, N et al. (2 more authors) (2016) Analysis of milling of dry compacted ribbons by distinct element method. Chemical Engineering Science, 149. pp. 204-214. ISSN 0009-2509

Zafar, U, Hare, C, Calvert, G et al. (5 more authors) (2015) Comparison of cohesive powder flowability measured by Schulze Shear Cell, Raining Bed Method, Sevilla Powder Tester and new Ball Indentation Method. Powder Technology, 286. pp. 807-816. ISSN 0032-5910

Hare, C and Ghadiri, M orcid.org/0000-0003-0479-2845 (2015) Attrition of paracetamol and aspirin under bulk shear deformation. Chemical Engineering Science, 125. pp. 13-19. ISSN 0009-2509

Pasha, M, Hare, C, Hassanpour, A et al. (1 more author) (2015) Numerical analysis of strain rate sensitivity in ball indentation on cohesive powder Beds. Chemical Engineering Science, 123. 92 - 98. ISSN 0009-2509

Zafar, U, Hare, C, Hassanpour, A et al. (1 more author) (2014) Drop test: A new method to measure the particle adhesion force. Powder Technology, 264. 236 - 241. ISSN 1873-328X

Pasha, M, Dogbe, S, Hare, C et al. (2 more authors) (2014) A linear model of elasto-plastic and adhesive contact deformation. Granular Matter, 16 (1). 151 - 162. ISSN 1434-7636

Hare, C, Ghadiri, M and Dennehy, R (2011) Prediction of attrition in agitated particle beds. Chemical Engineering Science, 66 (20). 4757 - 4770. ISSN 0009-2509

Book Section

Alizadeh Behjani, M, Pasha, M, Lu, H et al. (2 more authors) (2019) Prevailing Conditions of Flow in Particulate Systems. In: Hassanpour, A, Hare, C and Pasha, M, (eds.) Powder Flow: Theory, Characterisation and Application. Royal Society of Chemistry , pp. 39-63. ISBN 978-1-78801-224-9

Proceedings Paper

Stavrou, AG, Hare, C, Hassanpour, A orcid.org/0000-0002-7756-1506 et al. (1 more author) (2017) Flowability assessment of weakly consolidated powders. In: Radjai, F, Nezamabadi, S, Luding, S and Delenne, JY, (eds.) EPJ Web of Conferences. Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 03-07 Jul 2017, Montpellier, France. EDP Sciences .

Dogbe, S, Ghadiri, M orcid.org/0000-0003-0479-2845, Hassanpour, A et al. (4 more authors) (2017) Fluid-particle energy transfer in spiral jet milling. In: Radjai, F, Nezamabadi, S, Luding, S and Delenne, JY, (eds.) EPJ Web of Conferences. Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 03-07 Jul 2017, Montpellier, France. EDP Sciences .

Hare, C and Ghadiri, M orcid.org/0000-0003-0479-2845 (2017) Stress and strain rate analysis of the FT4 Powder Rheometer. In: Radjai, F, Nezamabadi, S, Luding, S and Delenne, JY, (eds.) EPJ Web of Conferences. Powders and Grains 2017 – 8th International Conference on Micromechanics on Granular Media, 03-07 Jul 2017, Montpellier, France. EDP Sciences .

Abbas, RK, Hassanpour, A, Hare, C et al. (1 more author) (2014) Instantaneous monitoring of drill bit wear and specific energy as a criteria for the appropriate time for pulling out worn bits. In: Proceedings. SPE Annual Caspian Technical Conference and Exhibition, 12-14 Nov 2014, Astana, Kazakhstan. Society of Petroleum Engineers . ISBN 978-1-61399-354-5

Pasha, M, Hare, C, Ghadiri, M et al. (2 more authors) (2013) Analysis of seed processing by the distinct element method. In: AIP Conference Proceedings. Powders and Grains 2013, 08-12 Jul 2013, Sydney, Australia. American Institute of Physics , 931 - 934. ISBN 9780735411661

Pasha, M, Hare, C, Hassanpour, A et al. (1 more author) (2013) Assessing flowability of small quantities of cohesive powder using distinct element modelling. In: Yu, A, Dong, K, Yang, R and Luding, S, (eds.) AIP Conference Proceedings. 7th International Conference on Micromechanics of Granular Media, 08-12 Jul 2013, Sydney, Australia. American Institute of Physics , 959 - 962. ISBN 9780735411661

Hare, C and Ghadiri, M (2013) Prediction of bulk particle breakage due to naturally formed shear bands. In: AIP Conference Proceedings. Proceedings of the 7th International Conference on Micromechanics of Granular Media, 08-12 Jul 2013, Sydney, Australia. American Institute of Physics , 487 - 490. ISBN 9780735411661

Hare, C and Ghadiri, M (2013) The influence of aspect ratio and roughness on flowability. In: AIP Conference Proceedings. International Conference on Micromechanics of Granular Media, 08-12 Jul 2013, Sydney, Australia. American Institute of Physics , 887 - 890. ISBN 9780735411661

Pasha, M, Dogbe, S, Hare, C et al. (2 more authors) (2013) A new contact model for modelling of elastic-plastic-adhesive spheres in distinct element method. In: AIP Conference Proceedings. 7th International Conference on Micromechanics of Granular Media, 08-12 Jul 2013, Sydney, Australia. American Institute of Physics , 831 - 834. ISBN 9780735411661

Book

Hassanpour, A orcid.org/0000-0002-7756-1506, Hare, C and Pasha, M (2019) Powder Flow: Theory, Characterisation and Application. Royal Society of Chemistry . ISBN 978-1-78801-224-9