Items where authors include "Ghadbeigi, H."
Up a levelArticle
Ullrich, K., von Elling, M., Gutzeit, K. et al. (6 more authors) (2024) AI-based optimisation of total machining performance: a review. CIRP Journal of Manufacturing Science and Technology, 50. pp. 40-54. ISSN 1755-5817
Freeman, F.S.H.B. orcid.org/0000-0002-7402-1790, Jones, L. orcid.org/0000-0001-9927-0913, Goodall, A. et al. (2 more authors) (2024) Structural metamaterial lattices by laser powder-bed fusion of 17-4PH steel. Additive Manufacturing Letters, 8. 100190. ISSN 2772-3690
Chen, X. orcid.org/0000-0001-7448-9011, Wu, H. orcid.org/0000-0003-3785-5515, Ede, J.D. orcid.org/0000-0002-5832-0950 et al. (3 more authors) (2023) A model to account for magnetic permeability changes resulting from edge damage caused by laser cutting in a high performance cobalt-iron alloy. Journal of Magnetism and Magnetic Materials, 584. 171081. ISSN 0304-8853
Pedrazzini, S., Pek, M.E., Ackerman, A.K. et al. (11 more authors) (2023) Effect of substrate bed temperature on solute segregation and mechanical properties in Ti–6Al–4V produced by laser powder bed fusion. Metallurgical and Materials Transactions A, 54 (8). pp. 3069-3085. ISSN 1073-5623
Pietrow, N., Curtis, D., Novovic, D. et al. (2 more authors) (2022) Evolution of electroplated cBN tool surface texture parameters during point grinding. Journal of Manufacturing Science and Engineering, 144 (12). 121007. ISSN 1087-1357
Monoranu, M. orcid.org/0000-0003-4759-0223, Mitchell, R.L., Kerrigan, K. et al. (2 more authors) (2022) The effect of particle reinforcements on chip formation and machining induced damage of modified epoxy carbon fibre reinforced polymers (CFRPs). Composites Part A: Applied Science and Manufacturing, 154. 106793. ISSN 1359-835X
Brown, M. orcid.org/0000-0002-0937-9139, M'saoubi, R., Crawforth, P. orcid.org/0000-0002-1235-8494 et al. (3 more authors) (2022) On deformation characterisation of machined surfaces and machining-induced white layers in a milled titanium alloy. Journal of Materials Processing Technology, 299. 117378. ISSN 0924-0136
Jahangiri, H., Mohagheghi, S., Asgari Alamdari, A. et al. (6 more authors) (2021) Microstructure development and mechanical performance of Al2CrFeMnTi light-weight high entropy alloy. Intermetallics, 139. 107376. ISSN 0966-9795
Priest, J., Ghadbeigi, H., Avar-Soberanis, S. et al. (1 more author) (2021) 3D finite element modelling of drilling: the effect of modelling method. CIRP Journal of Manufacturing Science and Technology, 35. pp. 158-168. ISSN 1755-5817
Brown, M. orcid.org/0000-0002-0937-9139, Pieris, D., Wright, D. et al. (7 more authors) (2021) Non-destructive detection of machining-induced white layers through grain size and crystallographic texture-sensitive methods. Materials & Design, 200. 109472. ISSN 0264-1275
Pedrazzini, S., Pek, M.E., Ackerman, A.K. et al. (10 more authors) (2020) Influence of powder-bed temperature on the microstructure and mechanical properties of Ti-6Al-4V produced by selective laser melting. arXiv. (Submitted)
Ashworth, S. orcid.org/0000-0003-1192-6127, Fairclough, J.P.A., Monoranu, M. orcid.org/0000-0003-4759-0223 et al. (4 more authors) (2020) Epifluorescent microscopy of edge-trimmed carbon fibre-reinforced polymers : an alternative to computed tomography scanning. Advanced Composites Letters, 29. ISSN 2633-366X
Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Al-RUBAYE, A., Robinson, F.C.J. et al. (3 more authors) (2020) Blanking induced damage in thin 3.2 % silicon steel sheets. Production engineering, 14 (1). pp. 53-64. ISSN 0944-6524
Brown, M. orcid.org/0000-0002-0937-9139, Crawforth, P., M'Saoubi, R. et al. (4 more authors) (2019) Quantitative characterization of machining-induced white layers in Ti–6Al–4V. Materials Science and Engineering: A, 764. 138220. ISSN 0921-5093
Jenkins, S.N.M., Oulton, T.H., Hernandez-Nava, E. et al. (3 more authors) (2019) Anisotropy in the mechanical behavior of Ti6Al4V electron beam melted lattices. Mechanics Research Communications, 100. 103400. ISSN 0093-6413
Ali, H., Ghadbeigi, H., Hosseinzadeh, F. et al. (2 more authors) (2019) Effect of pre-emptive in-situ parameter modification on residual stress distributions within selective laser melted Ti6Al4V components. International Journal of Advanced Manufacturing Technology, 103 (9-12). pp. 4467-4479. ISSN 0268-3768
Goodall, R. orcid.org/0000-0003-0720-9694, Hernandez-Nava, E., Jenkins, S.N.M. et al. (5 more authors) (2019) The effects of defects and damage in the mechanical behavior of Ti6Al4V lattices. Frontiers in Materials, 6. 117. ISSN 2296-8016
Nioi, M., Pinna, C., Celotto, S. et al. (4 more authors) (2019) Finite element modelling of surface defect evolution during hot rolling of Silicon steel. Journal of Materials Processing Technology, 268. pp. 181-191. ISSN 0924-0136
Ashworth, S. orcid.org/0000-0003-1192-6127, Fairclough, J.P.A. orcid.org/0000-0002-1675-5219, Takikawa, Y. et al. (4 more authors) (2019) Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers. Composites Part A: Applied Science and Manufacturing, 119. pp. 88-100. ISSN 1359-835X
Ducobu, F., Rivière-Lorphèvre, E., Galindo-Fernandez, M. et al. (3 more authors) (2019) Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. Procedia CIRP, 82. pp. 142-147. ISSN 2212-8271
Duboust, N., Pinna, C. orcid.org/0000-0002-9079-1381, Ghadbeigi, H. orcid.org/0000-0001-6507-2353 et al. (4 more authors) (2019) FE modelling of CFRP machining- prediction of the effects of cutting edge rounding. Procedia CIRP, 82. pp. 59-64. ISSN 2212-8271
Pritchard, T., Smith, C., Ghadbeigi, H. orcid.org/0000-0001-6507-2353 et al. (3 more authors) (2019) Modelling orthogonal and oblique cutting via discontinuity layout optimization. Procedia CIRP, 82. pp. 37-42. ISSN 2212-8271
Galindo-Fernandez, M., Mumtaz, K.A., Rivera-Diaz-del-Castillo, P.E.J. et al. (2 more authors) (2018) A microstructure sensitive model for deformation of Ti-6Al-4V describing Cast-and-Wrought and Additive Manufacturing morphologies. Materials and Design, 160. pp. 350-362. ISSN 0261-3069
Brown, M., Wright, D., M'Saoubi, R. et al. (5 more authors) (2018) Destructive and non-destructive testing methods for characterization and detection of machining induced white layer: A review paper. CIRP Journal of Manufacturing Science and Technology. ISSN 1755-5817
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. orcid.org/0000-0001-8083-1661 (2018) Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V. Journal of Materials Engineering and Performance, 27 (8). pp. 4059-4068. ISSN 1059-9495
Celotto, S., Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Pinna, C. orcid.org/0000-0002-9079-1381 et al. (2 more authors) (2018) Deformation-induced microstructural banding in TRIP steels. Metallurgical and Materials Transactions A, 49 (7). pp. 2893-2906. ISSN 1073-5623
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. (2018) Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach. International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2621-2633. ISSN 0268-3768
Alborzi, E., Blakey, S., Ghadbeigi, H. et al. (1 more author) (2018) Prediction of growth of jet fuel autoxidative deposits at inner surface of a replicated jet engine burner feed arm. Fuel, 214. pp. 528-537. ISSN 0016-2361
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. (2018) Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 712. pp. 175-187. ISSN 0921-5093
Palmer, J.W., Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Curtis, D. orcid.org/0000-0001-6402-6996 et al. (1 more author) (2018) An experimental study of the effects of dressing parameters on the topography of grinding wheels during roller dressing. Journal of Manufacturing Processes, 31. pp. 348-355. ISSN 1526-6125
Ghaei, A., Khosravi, M., Badrossamay, M. et al. (1 more author) (2017) Micro-dimple rolling operation of metallic surfaces. International Journal of Advanced Manufacturing Technology, 93. pp. 3749-3758. ISSN 0268-3768
Nioi, M., Celotto, S., Pinna, C. et al. (2 more authors) (2017) Surface defect evolution in hot rolling of high-Si electrical steels. Journal of Materials Processing Technology, 249. pp. 302-312. ISSN 0924-0136
Ali, H., Ma, L., Ghadbeigi, H. et al. (1 more author) (2017) In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 695. pp. 211-220. ISSN 0921-5093
Alborzi, E., Blakey, S., Ghadbeigi, H. orcid.org/0000-0001-6507-2353 et al. (2 more authors) (2016) Investigation of surface deposition in a simulated fuel injector feed arm with sudden expansion/contraction. Fuel, 186. pp. 534-543. ISSN 0016-2361
Efthymiadis, P., Dashwood, R., Shollock, B. et al. (4 more authors) (2016) Multiscale characterisation of the mechanical properties of austenitic stainless steel joints. Materials Science and Engineering: A, 676. pp. 324-335. ISSN 0921-5093
Duboust, N. orcid.org/0000-0001-7960-0196, Melis, D., Pinna, C. orcid.org/0000-0002-9079-1381 et al. (4 more authors) (2016) Machining of Carbon Fibre: Optical Surface Damage Characterisation and Tool Wear Study. Procedia CIRP, 45. pp. 71-74. ISSN 2212-8271
Duboust, N. orcid.org/0000-0001-7960-0196, Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Pinna, C. orcid.org/0000-0002-9079-1381 et al. (4 more authors) (2016) An optical method for measuring surface roughness of machined Carbon Fibre Reinforced Plastic composites. Journal of Composite Materials. ISSN 0021-9983
Alharbi, K., Ghadbeigi, H., Efthymiadis, P. et al. (4 more authors) (2015) Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation. Modelling and Simulation in Materials Science and Engineering, 23 (8). 085005. ISSN 0965-0393
Ghadbeigi, H., Pinna, C. orcid.org/0000-0002-9079-1381 and Celotto, S. (2013) Failure mechanisms in DP600 steel: Initiation, evolution and fracture. Materials Science and Engineering: A, 588. pp. 420-431. ISSN 0921-5093
Ghadbeigi, H., Pinna, C. orcid.org/0000-0002-9079-1381 and Celotto, S. (2012) Quantitative strain analysis of the large deformation at the scale of microstructure: comparison between Digital Image Correlation and Microgrid techniques. Experimental Mechanics, 52 (9). pp. 1483-1492. ISSN 0014-4851
H-Gangaraj, S.M., Alvandi-Tabrizi, Y., Farrahi, G.H. et al. (2 more authors) (2011) Finite element analysis of shot-peening effect on fretting fatigue parameters. Tribology International, 44 (11). pp. 1583-1588. ISSN 0301-679X
Ghadbeigi, H., Pinna, C. orcid.org/0000-0002-9079-1381, Celotto, S. et al. (1 more author) (2010) Local plastic strain evolution in a high strength dual-phase steel. Materials Science and Engineering: A , 527 (18-19). pp. 5026-5032. ISSN 0921-5093
Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Pinna, C. orcid.org/0000-0002-9079-1381, Celotto, S. et al. (1 more author) (2010) Strain Evolution Measurement at the Microscale of a Dual Phase Steel Using Digital Image Correlation. Applied Mechanics and Materials, 24-25. pp. 201-206. ISSN 1660-9336
Ghadbeigi, H., Bradbury, S.R., Pinna, C. et al. (1 more author) (2008) Determination of micro-scale plastic strain caused by orthogonal cutting. International Journal of Machine Tools and Manufacture, 48 (2). pp. 228-235. ISSN 0890-6955
Proceedings Paper
Jamshidi, H., Mejías, F.C. and Ghadbeigi, H. orcid.org/0000-0001-6048-9408 (2023) A finite element assessment of the workpiece plastic deformation in machining of Ti-6Al-4V. In: Schulze, V. and Biermann, D., (eds.) Procedia CIRP. 19th CIRP Conference on Modeling of Machining Operations, 31 May - 02 Jun 2023, Karlsruhe, Germany. Elsevier BV , pp. 62-67.
Priest, J., Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Ayvar-Soberanis, S. orcid.org/0000-0002-1899-9743 et al. (2 more authors) (2022) Analysis of the contact mechanics in machining using a novel high-speed tribometer. In: Rech, J. and Outeiro, J., (eds.) Procedia CIRP. 6th CIRP Conference on Surface Integrity (CIRP CSI 2022), 08-10 Jun 2022, Lyon, France. Elsevier BV , pp. 123-128.
Priest, J., Ghadbeigi, H., Ayvar-Soberanis, S. orcid.org/0000-0002-1899-9743 et al. (2 more authors) (2022) A modified Johnson-Cook constitutive model for improved thermal softening prediction of machining simulations in C45 steel. In: Rech, J. and Outeiro, J., (eds.) Procedia CIRP. 6th CIRP Conference on Surface Integrity, 08-10 Jun 2022, Lyon, France. Elsevier BV , pp. 106-111.
Monoranu, M. orcid.org/0000-0003-4759-0223, Ghadbeigi, H., Patrick, J. et al. (2 more authors) (2021) Chip formation mechanism during orthogonal cutting of rubber microparticles and silica nanoparticles modified epoxy of polymers. In: Medini, K. and Wuest, T., (eds.) Procedia CIRP. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19, 26-28 Oct 2021, Online conference. Elsevier B.V. , pp. 176-181.
Priest, J., Ghadbeigi, H., Ayvar-Soberanis, S. et al. (1 more author) (2021) Effects of coefficient of friction coupled with a deformation dependent friction model in cutting simulations. In: Govekar, E., Pušavec, F. and Vrabic, R., (eds.) Procedia CIRP. 8th CIRP Conference on Modeling of Machining Operations (CMMO), 15-17 Jun 2021, Ljubljana, Slovenia (online). Elsevier , pp. 429-434.
Pietrow, N., Curtis, D., Ghadbeigi, H. et al. (2 more authors) (2021) An investigation into the challenges of the point grinding machining process. In: Ozturk, E., Curtis, D. and Ghadbeigi, H., (eds.) Procedia CIRP. 9th CIRP Conference on High Performance Cutting, 24-26 May 2021, Virtual conference. Elsevier , pp. 190-193.
Brown, M. orcid.org/0000-0002-0937-9139, Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Crawforth, P. et al. (4 more authors) (2020) Non-destructive detection of machining-induced white layers in ferromagnetic alloys. In: Arrazola, P.J. and Madariaga, A., (eds.) Procedia CIRP. 5th CIRP Conference on Surface Integrity (CSI 2020), 01-05 Jun 2020, Mondragon, Spain. Elsevier , pp. 420-425.
Dowding, R., Pinna, C. orcid.org/0000-0002-9079-1381, Ghadbeigi, H. orcid.org/0000-0001-6507-2353 et al. (1 more author) (2020) Analyzing the properties promoting shear bands and damage initiation in 3-point bending of ultra-high strength steel. In: Procedia Manufacturing. 18th International Conference on Metal Forming 2020, 13-16 Sep 2020, Krakow, Poland. Elsevier BV , pp. 570-573.
Monoranu, M., Ashworth, S. orcid.org/0000-0003-1192-6127, M'Saoubi, R. et al. (5 more authors) (2019) A comparative study of the effects of milling and abrasive water jet cutting on flexural performance of CFRP. In: Kerrigan, K., Mativenga, P. and El-Dessouky, H., (eds.) Procedia CIRP. 2nd CIRP Conference on Composite Material Parts Manufacturing, 10-11 Oct 2019, Advanced Manufacturing Research Centre, UK. Elsevier , pp. 277-283.
Palmer, J., Curtis, D. orcid.org/0000-0001-6402-6996, Novovic, D. et al. (1 more author) (2018) The influence of abrasive grit morphology on wheel topography and grinding performance. In: Monostori, L., Stepan, G. and Bachrathy, D., (eds.) Procedia CIRP. 8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 Jun 2018, Budapest, Hungary. Elsevier , pp. 239-242.
Dowding, R.G., Pinna, C. orcid.org/0000-0002-9079-1381, Ghadbeigi, H. orcid.org/0000-0001-6507-2353 et al. (1 more author) (2018) Localized damage analysis for high strength S960 steel using micro-tensile testing and digital image correlation. In: Ubiquity Proceedings. 5th International Small Sample Test Techniques Conference, 10-12 Jul 2018, Swansea, Wales. Ubiquity Press, Ltd. , p. 16.
Duboust, N., Pinna, C., Ghadbeigi, H. et al. (4 more authors) (2017) 2D and 3D Finite Element models for the edge trimming of CFRP. In: Outeiro, J. and Poulachon, G., (eds.) Procedia CIRP. 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), June 15-16, 2017, Cluny, France. Elsevier , pp. 233-238.