Rajendiran, S., Rossall, A. K. orcid.org/0000-0002-0123-8163, Gibson, Andrew Robert orcid.org/0000-0002-1082-4359 et al. (1 more author) (2014) Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide. Surface & coatings technology. pp. 417-423. ISSN 0257-8972
Abstract
Pulsed laser deposition (PLD) in a low-pressure oxygen atmosphere is commonly used for the production of high-quality, stoichiometric zinc oxide thin films. An alternative approach that has the potential benefit of increased process control is plasma-enhanced PLD, i.e. the use of a low-temperature oxygen plasma instead of a neutral gas. So far, the development of PE-PLD, and PLD in general, has been hampered by a lack of detailed understanding of the underpinning physics and chemistry. In this paper, we present modelling investigations aimed at further developing such understanding. Two-dimensional modelling of an inductively-coupled radio-frequency oxygen plasma showed that densities of 1014-1015 cm- 3 of reactive oxygen species O and O2* can be produced for operating pressures between 3 and 100 Pa. Together with the absolute densities of species, also the ratio between different reactive species, e.g. O and O2*, can be controlled by changing the operating pressure. Both can be used to find the optimum conditions for stoichiometric zinc oxide thin film deposition. Additionally, we investigated laser ablation of zinc using a different two-dimensional hydrodynamic code (POLLUX). This showed that the amount of material that is ablated increases from 2.9 to 4.7 μg per pulse for laser fluences from 2 to 10 J/cm2. However, the increased laser fluence also results in an increased average ionisation of the plasma plume, from 3.4 to 5.6 over the same fluence range, which is likely to influence the chemistry near the deposition substrate and consequently the film quality.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2014 The Authors. This content is made available by the publisher under a Creative Commons Attribution Licence. This means that a user may copy, distribute and display the resource providing that they give credit. Users must adhere to the terms of the licence. |
Keywords: | Inductively coupled plasma,Oxygen radio-frequency plasma,Pulsed laser deposition,Zinc oxide thin film |
Dates: |
|
Institution: | The University of York |
Academic Units: | The University of York The University of York > Faculty of Sciences (York) > Physics (York) |
Funding Information: | Funder Grant number EPSRC EP/K018388/1 Unknown UNSPECIFIED |
Depositing User: | Pure (York) |
Date Deposited: | 17 Feb 2016 15:49 |
Last Modified: | 18 Dec 2024 00:04 |
Published Version: | https://doi.org/10.1016/j.surfcoat.2014.06.062 |
Status: | Published |
Refereed: | Yes |
Identification Number: | 10.1016/j.surfcoat.2014.06.062 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:95051 |
Download
Filename: Rajendiran_SurfCoatTechnol.pdf
Description: Rajendiran-SurfCoatTechnol