Eshiet, KI and Sheng, Y (2013) Carbon dioxide injection and associated hydraulic fracturing of reservoir formations. Environmental Earth Sciences, 72 (4). 1011 - 1024. ISSN 1866-6280
Abstract
The storage potential of subsurface geological systems makes them viable candidates for long-term disposal of significant quantities of CO. The geo-mechanical responses of these systems as a result of injection processes as well as the protracted storage of CO are aspects that require sufficient understanding. A hypothetical model has been developed that conceptualises a typical well-reservoir system comprising an injection well where the fluid (CO) is introduced and a production/abandoned well sited at a distant location. This was accomplished by adopting a numerical methodology (discrete element method), specifically designed to investigate the geo-mechanical phenomena whereby the various processes are monitored at the inter-particle scale. Fracturing events were simulated. In addition, the influence of certain operating variables such as injection flow rate and fluid pressure was studied with particular interest in the nature of occurring fractures and trend of propagation, the pattern and magnitude of pressure build-up at the well vicinity, pressure distribution between well regions and pore velocity distribution between well regions. Modelling results generally show an initiation of fracturing caused by tensile failure of the rock material at the region of fluid injection; however, fracturing caused by shear failure becomes more dominant at the later stage of injection. Furthermore, isolated fracturing events were observed to occur at the production/abandoned wells that were not propagated from the injection point. This highlights the potential of CO introduced through an injection well, which could be used to enhance oil/gas recovery at a distant production well. The rate and magnitude of fracture development are directly influenced by the fluid injection rate. Likewise, the magnitude of pressure build-up is greatly affected by the fluid injection rate and the distance from the point of injection. The DEM modelling technique illustrated provides an effective procedure that allows for more specific investigations of geo-mechanical mechanisms occurring at subsurface systems. The application of this methodology to the injection and storage of CO facilitates the understanding of the fracturing phenomenon as well as the various factors governing the process.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2014 Springer. Reproduced in accordance with the publisher's self-archiving policy. The final publication is available at Springer via http://dx.doi.org/10.1007/s12665-013-3018-3 |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Civil Engineering (Leeds) > Institute for Resilient Infrastructure (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 04 Dec 2014 12:11 |
Last Modified: | 18 Jan 2018 20:00 |
Published Version: | http://dx.doi.org/10.1007/s12665-013-3018-3 |
Status: | Published |
Publisher: | Springer |
Refereed: | Yes |
Identification Number: | 10.1007/s12665-013-3018-3 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:81441 |