Sobhani, M, Arabi, H, Mirhabibi, A et al. (1 more author) (2013) Microstructural evolution of copper-titanium alloy during in-situ formation of TiB2 particles. Transactions of Nonferrous Metals Society of China (English Edition), 23 (10). 2994 - 3001. ISSN 1003-6326
Abstract
Bulk Cu-Ti alloy reinforced by TiB2 nano particles was prepared using in-situ reaction between Cu-3.4%Ti and Cu-0.7%B master alloys along with rapid solidification and subsequent heat treatment for 1-10 h at 900 C. High-resolution transmission electron microscopy (HRTEM) characterization showed that primary TiB2 nano particles and TiB whiskers were formed by in-situ reaction between Ti and B in the liquid copper. The formation of TiB whiskers within the melt led to coarsening of TiB2 particles. Primary TiB2 particles were dispersed along the grain boundaries and hindered grain growth at high temperature, while the secondary TiB2 particles were formed during heat treatment of the alloy by diffusion reaction of solute titanium and boron inside the grains. Electrical conductivity and hardness of the composite were evaluated during heat treatment. The results indicated that the formation of secondary TiB2 particles in the matrix caused a delay in hardness reduction at high temperature. The electrical conductivity and hardness increased up to 8 h of heat treatment and reached 33.5% IACS and HV 158, respectively. .
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2013. Elsevier. Uploaded in accordance with the publisher's self-archiving policy. NOTICE: this is the author’s version of a work that was accepted for publication in ransactions of Nonferrous Metals Society of China (English Edition). Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Transactions of Nonferrous Metals Society of China (English Edition), 23 (10),(2013) DOI:10.1016/S1003-6326(13)62826-5 |
Keywords: | In-situ reaction; TiB whiskers; TiB2; Composite; Cu-Ti |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Chemical & Process Engineering (Leeds) > Institute for Materials Research (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 25 Nov 2014 11:39 |
Last Modified: | 19 Jan 2018 07:13 |
Published Version: | http://dx.doi.org/10.1016/S1003-6326(13)62826-5 |
Status: | Published |
Publisher: | Elsevier |
Refereed: | Yes |
Identification Number: | 10.1016/S1003-6326(13)62826-5 |
Related URLs: | |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:81353 |