Ghadbeigi, H. orcid.org/0000-0001-6048-9408, Priest, J., Ayvar-Soberanis, S. orcid.org/0000-0002-1899-9743 et al. (2 more authors) (2026) Drilling induced surface integrity: surface deformation characterization. In: Beaucamp, A., Nagato, K., Yamato, S., Kuji, C., Sato, R. and Yoshizaki, R., (eds.) Procedia CIRP. 8th CIRP Conference on Surface Integrity, 19-22 May 2026, Yokohama, Japan. Vol. 144. Elsevier BV, pp. 615-620. ISSN: 2212-8271. EISSN: 2212-8271.
Abstract
Drilling is a primary machining operation characterised by complex stress states and multi-axial deformation arising from the interaction between the cutting edges and the workpiece material. The surface integrity and subsurface state of produced holes cannot be assessed without using destructive processes. Therefore, modelling methods such as Finite Element are widely used to predict the hole quality as well as drills performance. While experimental data such as force and torque measurements are usually used as the validation method, these do not reflect the material behaviour down hole or provide any information about the deformation state while drilling. This study presents an experimental methodology to quantify deformation and temperature fields during drilling that can be used to validate a 2D and 3D models. Split samples were manufactured consisting of two 1045 low carbon steel samples manufactured with a grid formed using Electron Beam Lithography (EBL) clamped together. The EBL grid technique enabled plastic deformation at the cutting edge and beneath the chisel edge of the drill to be assessed. A series of thermocouples was also used to determine the heat generation and transfer. The results indicate a mixed deformation mode under the chisel edge while plastic strains as high as 2 is experienced by the material due to the compressive forces. Maximum plastic deformation at the drilled hole walls was measured to be about 0.35.
Metadata
| Item Type: | Proceedings Paper |
|---|---|
| Authors/Creators: |
|
| Editors: |
|
| Copyright, Publisher and Additional Information: | © 2026 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) |
| Keywords: | Drilling; Deformation measurement; Surface Integrity |
| Dates: |
|
| Institution: | The University of Sheffield |
| Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > School of Mechanical, Aerospace and Civil Engineering The University of Sheffield > University of Sheffield Research Centres and Institutes > AMRC with Boeing (Sheffield) The University of Sheffield > Advanced Manufacturing Institute (Sheffield) > AMRC with Boeing (Sheffield) |
| Date Deposited: | 20 Nov 2026 14:55 |
| Last Modified: | 20 Nov 2026 14:55 |
| Status: | Published |
| Publisher: | Elsevier BV |
| Refereed: | Yes |
| Identification Number: | 10.1016/j.procir.2026.02.013 |
| Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:248208 |
Download
Filename: 1-s2.0-S2212827126003070-main.pdf
Licence: CC-BY-NC-ND 4.0

CORE (COnnecting REpositories)
CORE (COnnecting REpositories)