Flanagan, M., Coyne, C., Kelly, C. et al. (4 more authors) (2026) The influence of drying time and cure temperature on the mechanical properties of powder epoxy composites. Applied Composite Materials, 33 (6). 183. ISSN: 0929-189X
Abstract
Fibre reinforced polymer composites are used in the renewable energy, automotive and aerospace industries due to their high specific strength, high fatigue resistance and competitive cost. Powder epoxy is a resin system with a heat activated curing agent, which can be used as a matrix in fibre reinforced polymer composites. Due to its low exotherm and its wide processing window, it has been used in the manufacture of large parts with thick cross-sections, such as wind and tidal turbine blades. Furthermore, its ability to fully impregnate fibre beds and create a solid, uncured preform gives it a design flexibility that makes several novel manufacturing processes and un-cured material forms possible, including the one-shot manufacturing process, dry pre-impregnated tape and filament for additive manufacturing. Despite the potential demonstrated by the material, it has not seen widespread uptake in the composites industry. This paper introduces powder epoxy and identifies some of the research gaps relating to the cure cycle. Several laminates are manufactured using varied cure cycles, and tests are carried out to determine the interlaminar shear strength and glass transition temperature. Additional process simulations are performed to predict the conditions of the various cure cycles. The results of the testing show that powder epoxy composites can be manufactured using low-temperature cure cycles, thus enabling the use of lower cost tooling. The properties of powder epoxy, combined with the more cost-efficient cure cycle demonstrated here, make it a viable material for exploitation in the renewable energy sector and beyond.
Metadata
| Item Type: | Article |
|---|---|
| Authors/Creators: |
|
| Copyright, Publisher and Additional Information: | © 2026 The Authors. Except as otherwise noted, this author-accepted version of a journal article published in Applied Composite Materials is made available via the University of Sheffield Research Publications and Copyright Policy under the terms of the Creative Commons Attribution 4.0 International License (CC-BY 4.0), which permits unrestricted use, distribution and reproduction in any medium, provided the original work is properly cited. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ |
| Dates: |
|
| Institution: | The University of Sheffield |
| Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > School of Mechanical, Aerospace and Civil Engineering |
| Date Deposited: | 20 Nov 2026 09:13 |
| Last Modified: | 20 Nov 2026 09:13 |
| Status: | Published |
| Publisher: | Springer Science and Business Media LLC |
| Refereed: | Yes |
| Identification Number: | 10.1007/s10443-026-10571-1 |
| Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:248193 |
Download
Filename: Powder Epoxy Manuscript_rev4.pdf
Licence: CC-BY 4.0

CORE (COnnecting REpositories)
CORE (COnnecting REpositories)