Rumney, J.R.L. orcid.org/0000-0001-5160-4363, de Medeiros, R.B.D. orcid.org/0000-0001-5630-7333, Ng, W.S. orcid.org/0000-0002-5119-3549 et al. (6 more authors) (2026) Sedimentation and flotation of calcite using polyacrylamide flocculants. Chemical Engineering Journal Advances, 28. 101503. ISSN: 2666-8211
Abstract
Combining sedimentation and flotation for fine-particle removal from mineral suspensions is challenging because the two processes favour different particle sizes, aggregate structures and interfacial conditions. This study investigated how polyacrylamide (PAM) agents of varying charge type, charge density and dose influence the flocculation, sedimentation and flotation behaviour of fine and coarse calcite suspensions. Aggregate evolution and shear response were characterised in situ using focused beam reflectance measurement (FBRM) and image-derived chord-length distribution (ID-CLD), supported by sedimentation, flotation, electrokinetic and polymer-adsorption measurements. For coarser OM-20 calcite ( D 4 , 3 ≈ 22 µm), an intermediate-charge anionic PAM (13.5%) produced the largest aggregates and strongest combined settling and clarification response within the commercial polymer series examined. For finer OM-2 calcite ( D 4 , 3 ≈ 8 µm), 30% anionic PAM produced the largest aggregates at 20 mg.L-1 and comparatively high shear resistance, although rapid settling at higher dose was accompanied by poor clarification. OM-20 floated effectively without pre-flocculation, whereas OM-2 showed substantially lower collector-only recovery and benefited from polymer-assisted aggregation. In Denver flotation screening, cationic PAM systems gave the highest recoveries, reaching 99.8%, with a minimum measured water carry-over of 36.0%. Flotation-matched FBRM measurements showed that chord-length responses evolved substantially during sequential PAM-NaOl-MIBC conditioning and that initial PAM-induced flocculation alone did not predict the subsequent flotation response. Overall, polymer conditions favourable for sedimentation were not necessarily those giving the highest flotation recovery, demonstrating that combined solid–liquid separation requires consideration of particle size, polymer chemistry, shear response and complete reagent-conditioning history.
Metadata
| Item Type: | Article |
|---|---|
| Authors/Creators: |
|
| Copyright, Publisher and Additional Information: | © 2026 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/). |
| Keywords: | Flocculation; Sedimentation; Flotation; Solid–liquid separation; In situ floc characterisation; Polymer adsorption |
| Dates: |
|
| Institution: | The University of Sheffield |
| Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > School of Chemical, Materials and Biological Engineering |
| Date Deposited: | 21 Oct 2026 14:02 |
| Last Modified: | 21 Oct 2026 14:02 |
| Status: | Published |
| Publisher: | Elsevier BV |
| Refereed: | Yes |
| Identification Number: | 10.1016/j.ceja.2026.101503 |
| Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:246978 |
Download
Filename: 1-s2.0-S2666821126004709-main.pdf
Licence: CC-BY 4.0

CORE (COnnecting REpositories)
CORE (COnnecting REpositories)