Effect of Temperature on Aluminium Powder Flowability and Spreadability

In powder-based Additive Manufacturing (AM) the precise control of process parameters plays a significant role in the quality and efficiency of the printing process. Among these, the effect of temperature has received less attention in the literature, although it is a significant factor that influences the inter-particle forces and, consequently the powder flow and spreading behaviour of powders. In selective laser sintering (SLS) or selective laser melting (SLM), pre-heating the chamber and powder bed is a required step prior to sintering, hence, the temperature can significantly influence the layer adhesion and spread quality. In this context, the present study explores the effect of elevated temperature on the flow and spreading behaviours of AlSi10Mg powders. The flow properties of two different grades of aluminium alloy powders are characterised using the Carney and Hall flow tests, angle of repose and shear test techniques at different temperatures and correlated with the spreading behaviour at elevated temperatures, measured using the spreading rig with a heated bed developed at the University of Leeds. This study revealed that at elevated temperatures the spreadability of AlSi10Mg powders worsens because of changes in interparticle forces and particle surface interactions