Supercritical Water Liquefaction of Mixed Waste Polystyrene, Polypropylene, and Polyethylene for Production of High Yield Oils

Supercritical water liquefaction of different plastic wastes has been investigated under high-temperature and high-pressure conditions. The supercritical water liquefaction of commonly used plastic types, comprising polystyrene (PS), polypropylene (PP), and low-density polyethylene (LDPE) as well as their mixtures, is reported. The experiments were carried out at varying feedstock-to-water ratios with a residence time of 60 min under supercritical water reaction conditions. The process produced high oil yields of over 97 wt %, with the highest yields obtained at a plastic:water ratio of 1:3; at higher levels of input water, the yield of oil decreased slightly. The gas phase mainly consisted of light hydrocarbons such as methane, ethane, propane, and butane, with propane found to be the most abundant gas component. Aromatic hydrocarbons and alicyclic hydrocarbons were the major products in the product oil from the supercritical water liquefaction of polystyrene and polypropylene, whereas alkanes were predominant in the oil obtained from LDPE. Analysis of the oil obtained from binary (1:1) and ternary (1:1:1) plastic mixtures showed it exhibited aromatic hydrocarbons as the major constituent, indicating synergistic interaction. It was found that the incorporation of PP in the mixture facilitated the production of cyclic compounds and suppressed the production of alkanes. Supercritical water liquefaction offers an effective solution to plastic pollution, producing valuable products without the need for catalysts.