Haydari, Z., Talebi, F., Mehrabi, M. et al. (4 more authors) (2024) Insights into the assessment of spreadability of stainless steel powders in additive manufacturing. Powder Technology, 439. 119667. ISSN 0032-5910
Abstract
This work investigates the link between the single particle and bulk flow properties of stainless steel (SS316L) powders and their spreading behaviour for additive manufacturing (AM) application. Two different batches of SS316L powders, noted to have significantly different spreading behaviour in AM machines, were investigated. The two batches had almost identical particle size, morphology and bulk flow properties as quantified by angle of repose, Hausner ratio, Carr index and basic flow energy; however one of the batches did not consistently flow during Hall and Carney flow tests and also had very poor spreadability when evaluated using an in-house spreading rig. The flow and spreading behaviours of the poorly spreading batch significantly improved and became almost identical to the good batch when tested following drying, either in a vacuum oven or a freeze dryer. Elemental analysis revealed that batches had some small but significant differences in chemical composition. This study revealed the complexity of defining a correlation between powder properties and spreading behaviour, and the importance of considering the environmental conditions.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Keywords: | Additive manufacturing; Spreadability; Flowability; Humidity; SS316L |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Chemical & Process Engineering (Leeds) |
Funding Information: | Funder Grant number EPSRC (Engineering and Physical Sciences Research Council) EP/P006566/1 |
Depositing User: | Symplectic Publications |
Date Deposited: | 23 Apr 2024 14:35 |
Last Modified: | 23 Apr 2024 14:35 |
Status: | Published |
Publisher: | Elsevier |
Identification Number: | 10.1016/j.powtec.2024.119667 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:211698 |