Sfikas, A.K. orcid.org/0000-0002-9723-7164, Kamnis, S., Tse, M.C.H. orcid.org/0000-0002-0533-8970 et al. (4 more authors) (2023) Microstructural evaluation of thermal-sprayed CoCrFeMnNi0.8V high-entropy alloy coatings. Coatings, 13 (6). 1004. ISSN 2079-6412
Abstract
The aim of this work is to improve the understanding of the effect of the cooling rate on the microstructure of high-entropy alloys, with a focus on high-entropy alloy coatings, by using a combined computational and experimental validation approach. CoCrFeMnNi0.8V coatings were deposited on a steel substrate with high velocity oxy-air-fuel spray with the employment of three different deposition temperatures. The microstructures of the coatings were studied and compared with the microstructure of the equivalent bulk high-entropy alloy fabricated by suction casting and powder fabricated by gas atomization. According to the results, the powder and the coatings deposited by low and medium temperatures consisted of a BCC microstructure. On the other hand, the microstructure of the coating deposited by high temperature was more complex, consisting of different phases, including BCC, FCC and oxides. The phase constitution of the bulk high-entropy alloy included an FCC phase and sigma. This variation in the microstructural outcome was assessed in terms of solidification rate, and the results were compared with Thermo-Calc modelling. The microstructure can be tuned by the employment of rapid solidification techniques such as gas atomization, as well as subsequent processing such as high velocity oxy-air-fuel spray with the use of different spray parameters, leading to a variety of microstructural outcomes. This approach is of high interest for the field of high-entropy alloy coatings.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2023 by the authors. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/). |
Keywords: | high-entropy alloy coatings; thermal spray; gas atomization; cooling rate |
Dates: |
|
Institution: | The University of Sheffield |
Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > Department of Materials Science and Engineering (Sheffield) |
Depositing User: | Symplectic Sheffield |
Date Deposited: | 14 Jun 2023 12:07 |
Last Modified: | 14 Jun 2023 12:07 |
Status: | Published |
Publisher: | MDPI AG |
Refereed: | Yes |
Identification Number: | 10.3390/coatings13061004 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:200357 |