Seyrek, M. orcid.org/0000-0001-5386-4804 and Thackray, R. orcid.org/0000-0003-2573-0221 (2023) Effect of CaO/Al2O3 ratio on physical properties of lime-alumina-based mould powders. Metals, 13 (4). 719. ISSN 2075-4701
Abstract
High-aluminium steels contain a significant amount of aluminium. The reaction between Al in the liquid steel and SiO2 in lime-silica-based mould powders during the continuous casting process of high Al steel causes chemical compositional changes in the mould powders, subsequently affecting the surface quality of slabs. In order to solve the aforementioned problem, lime-alumina-based mould powders have been developed, which can lead to an increase in the surface quality of cast slabs by inhibiting steel/slag interaction. However, the mould slag tends to crystallise easily, which leads to a deterioration of the mould lubrication. In view of this aspect, it is important to develop and optimize lime-alumina-based mould powders to meet the requirements of continuous casting of high-aluminium steels. In this study, the changes in crystallinity, viscosity and melting temperature of lime-alumina-based mould powders with the effects of increasing the CaO/Al2O3 ratio have been observed through STA (Simultaneous Thermal Analysis), HSM (Hot Stage Microscopy), XRD (X-ray Diffraction), IPT (Inclined Plate Test) and rotational viscometer. The crystallisation behaviour of these mould powders was evaluated by generating CCT (continuous cooling transformation) diagrams. Additionally, the changes in steel chemistry have also been analysed using XRF (X-ray fluorescence) and ICP (Inductively Coupled Plasma Mass Spectrometer). The results of these analyses demonstrated that crystallinity of lime-alumina-based mould powder is increased while the initial crystallisation temperature and viscosity are decreased by CaO/Al2O3 additions. However, the degree of steel/slag interaction decreases with an increase in Al2O3 content.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. |
Keywords: | high-Al steels; mould powder; C/A ratio; crystallinity; steel-slag interaction |
Dates: |
|
Institution: | The University of Sheffield |
Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > Department of Materials Science and Engineering (Sheffield) |
Depositing User: | Symplectic Sheffield |
Date Deposited: | 11 May 2023 13:06 |
Last Modified: | 11 May 2023 13:06 |
Published Version: | http://dx.doi.org/10.3390/met13040719 |
Status: | Published |
Publisher: | MDPI AG |
Refereed: | Yes |
Identification Number: | 10.3390/met13040719 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:199041 |