Second-order ESO-based current sensor fault-tolerant strategy for sensorless control of PMSM with B-phase current

Usually, two-phase current sensors are required to realize sensorless control of permanent magnet synchronous motor (PMSM). However, once the phase current sensor fails, the whole system will not work. In this article, a novel second-order extended state observer (SO-ESO) based current sensor fault-tolerant strategy for realizing PMSM sensorless control and multiparameter identification is proposed, which can significantly improve the system reliability. When a fault occurs in the A-C two-phase current sensor, the proposed scheme uses only a B-phase current sensor to estimate the d-q axis stator current and time varying resistance, achieving a high-performance sensorless control function. In order to reduce the chattering of the system, a sigmoid function is introduced in the SO-ESO. In addition, an SO-ESO based parallel speed and multiparameter identification scheme are proposed by using two model reference adaptive system observer (MRASO). The first MRASO is designed based on super twisting algorithm with a corrective feedback loop and is used for estimating rotor speed and position. The second MRASO only needs to identify inductance and permanent flux because the stator resistance is estimated by SO-ESO. The second MRASO and SO-ESO updates the three identified electrical parameters (i.e., stator resistance, inductance, and permanent flux) and estimated currents to the first MRASO to achieve high robustness sensorless control. The relevant results show that the scheme gives good results, and the system has good dynamic performance and better fault tolerance.