Otitoju, O., Oko, E. orcid.org/0000-0001-9221-680X and Wang, M. orcid.org/0000-0001-9752-270X (2020) A new method for scale-up of solvent-based post-combustion carbon capture process with packed columns. International Journal of Greenhouse Gas Control, 93. 102900. ISSN 1750-5836
Abstract
Solvent-based post-combustion carbon capture (PCC) with packed column is the most commercially ready CO2 capture technology. To study commercial-scale PCC processes, validated pilot scale models are often scaled up to commercial-scale using the generalized pressure drop correlation (GPDC) chart which requires assuming the column pressure drop. The GPDC method may lead to either over-estimation or under-estimation of the column diameter. In this paper, a new method for estimating the packed column diameter without assuming the pressure drop has been proposed and used for model scale-up. The method was validated by scaling between two existing pilot plant sizes. The CO2 capture process was simulated in Aspen Plus® and validated at pilot scale. The validated model was scaled up to commercial CO2 capture plant capable of serving a 250 MWe combined cycle gas turbine power plant using the new method proposed in this study. The results obtained from the scale-up study were compared to those obtained when the GPDC method was used to design the same commercial CO2 capture plant. The results showed that the GPDC method overestimated the absorber and stripper diameter by 1.6 % and 8.5 % respectively. Process simulation results for the commercial-scale plant showed about 2.12 % and 5.63 % lower solvent flow rate and reboiler duty with the proposed method. Therefore, the capital and operating costs for the process using the newly proposed scale-up method could be lower based on our estimates of the column dimensions, solvent flow rate and specific reboiler duty.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2019 Elsevier Ltd. This is an author produced version of a paper subsequently published in International Journal of Greenhouse Gas Control. Uploaded in accordance with the publisher's self-archiving policy. Article available under the terms of the CC-BY-NC-ND licence (https://creativecommons.org/licenses/by-nc-nd/4.0/). |
Keywords: | Post-Combustion CO2 capture; Chemical absorption; Process modelling and simulation; Model validation; Scale-up; Combined cycle gas turbine power plant |
Dates: |
|
Institution: | The University of Sheffield |
Academic Units: | The University of Sheffield > Faculty of Engineering (Sheffield) > Department of Chemical and Biological Engineering (Sheffield) |
Depositing User: | Symplectic Sheffield |
Date Deposited: | 11 Dec 2019 13:23 |
Last Modified: | 20 Nov 2020 01:38 |
Status: | Published |
Publisher: | Elsevier |
Refereed: | Yes |
Identification Number: | 10.1016/j.ijggc.2019.102900 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:154478 |