Yu, K, Zhang, H, Hodges, C et al. (4 more authors) (2017) Foaming Behavior of Polymer-Coated Colloids: The Need for Thick Liquid Films. Langmuir, 33 (26). pp. 6528-6539. ISSN 0743-7463
Abstract
The current study examined the foaming behavior of poly(vinylpyrrolidone) (PVP)–silica composite nanoparticles. Individually, the two components, PVP and silica nanoparticles, exhibited very little potential to partition at the air–water interface, and as such, stable foams could not be generated. In contrast, combining the two components to form silica–PVP core–shell nanocomposites led to good “foamability” and long-term foam stability. Addition of an electrolyte (Na2SO4) was shown to have a marked effect on the foam stability. By varying the concentration of electrolyte between 0 and 0.55 M, three regions of foam stability were observed: rapid foam collapse at low electrolyte concentrations, delayed foam collapse at intermediate concentrations, and long-term stability (∼10 days) at the highest electrolyte concentration. The observed transitions in foam stability were better understood by studying the microstructure and physical and mechanical properties of the particle-laden interface. For rapidly collapsing foams the nanocomposite particles were weakly retained at the air–water interface. The interfaces in this case were characterized as being “liquid-like” and the foams collapsed within 100 min. At an intermediate electrolyte concentration (0.1 M), delayed foam collapse over ∼16 h was observed. The particle-laden interface was shown to be pseudo-solid-like as measured under shear and compression. The increased interfacial rigidity was attributed to adhesion between interpenetrating polymer layers. For the most stable foam (prepared in 0.55 M Na2SO4), the ratio of the viscoelastic moduli, G′/G″, was found to be equal to ∼3, confirming a strongly elastic interfacial layer. Using optical microscopy, enhanced foam stability was assessed and attributed to a change in the mechanism of foam collapse. Bubble–bubble coalescence was found to be significantly retarded by the aggregation of nanocomposite particles, with the long-term destabilization being recognized to result from bubble coarsening. For rapidly destabilizing foams, the contribution from bubble–bubble coalescence was shown to be more significant.
Metadata
Item Type: | Article |
---|---|
Authors/Creators: |
|
Copyright, Publisher and Additional Information: | © 2017 American Chemical Society. This document is the Accepted Manuscript version of a Published Work that appeared in final form in Langmuir, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acs.langmuir.7b00723. Uploaded in accordance with the publisher's self-archiving policy. |
Dates: |
|
Institution: | The University of Leeds |
Academic Units: | The University of Leeds > Faculty of Engineering & Physical Sciences (Leeds) > School of Chemical & Process Engineering (Leeds) |
Depositing User: | Symplectic Publications |
Date Deposited: | 23 Aug 2017 10:18 |
Last Modified: | 08 Jun 2018 00:39 |
Status: | Published |
Publisher: | American Chemical Society |
Identification Number: | 10.1021/acs.langmuir.7b00723 |
Open Archives Initiative ID (OAI ID): | oai:eprints.whiterose.ac.uk:120492 |