Determination of the thin film structure of zwitterion doped poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate): a neutron reflectivity study

Doping poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is known to improve its conductivity, however little is known about the thin film structure of PEDOT:PSS when doped with an asymmetrically charged dopant. In this study, PEDOT:PSS was doped with diferent concentrations of the zwiterion 3-(N,N Dimethylmyristylammonio)propanesulfonate (DYMAP), and its effect on the bulk structure of the films characterized by neutron reflectivity. The results show that at low doping concentration, the film separates into a quasi bi-layer structure with lower roughness, (10%), increased thickness (18%), and lower electrical conductivity compared to the undoped sample. However when the doping concentration increases the film forms into a homogeneous layer and experiences an enhanced conductivity by more than an order of magnitude, a 20% smoother surface, and a 60% thickness increase relative to the pristine sample. Atomic force microscopy and profilometry measurements confirmed these findings, and AFM height and phase images showed the gradually increasing presence of DYMAP on the film surface as a function of the concentration. Neutron reflectivity also showed that the quasi bi-layer structure of the lowest concentration doped PEDOT:PSS is separated by a graded rather than a well defined interface. Our findings provide an understanding of the layer structure modification for doped PEDOT:PSS films that should be prove important for device applications.