Items where authors include "Sims, N.D."
Up a levelArticle
Ozsoy, M. orcid.org/0000-0002-3069-7377, Sims, N.D. orcid.org/0000-0002-6292-6736 and Ozturk, E. (2022) Robotically assisted active vibration control in milling: a feasibility study. Mechanical Systems and Signal Processing, 177. 109152. ISSN 0888-3270
Dogan, H., Sims, N.D. orcid.org/0000-0002-6292-6736 and Wagg, D.J. orcid.org/0000-0002-7266-2105 (2022) Design, testing and analysis of a pivoted-bar inerter device used as a vibration absorber. Mechanical Systems and Signal Processing, 171. 108893. ISSN 0888-3270
Tóth, M., Sims, N.D. orcid.org/0000-0002-6292-6736 and Curtis, D. orcid.org/0000-0001-6402-6996 (2022) An alternative wheel regenerative mechanism in surface grinding : distributed grit dullness captured by specific energy waves. Mechanical Systems and Signal Processing, 162. 107964. ISSN 0888-3270
Celikag, H., Ozturk, E. orcid.org/0000-0001-9982-2837 and Sims, N.D. (2021) Can mode coupling chatter happen in milling? International Journal of Machine Tools and Manufacture, 165. 103738. ISSN 0890-6955
Deastra, P. orcid.org/0000-0002-1709-4686, Wagg, D.J. orcid.org/0000-0002-7266-2105, Sims, N.D. et al. (1 more author) (2020) Tuned inerter dampers with linear hysteretic damping. Earthquake Engineering and Structural Dynamics, 49 (12). pp. 1216-1235. ISSN 0098-8847
Gibbons, T.J., Ozturk, E., Xu, L. et al. (1 more author) (2020) Chatter avoidance via structural modification of tool-holder geometry. International Journal of Machine Tools and Manufacture, 150. 103514. ISSN 0890-6955
Dogan, H., Sims, N.D. orcid.org/0000-0002-6292-6736 and Wagg, D.J. orcid.org/0000-0002-7266-2105 (2019) Investigation of the inerter-based dynamic vibration absorber for machining chatter suppression. Journal of Physics: Conference Series, 1264. 012030. ISSN 1742-6588
Deastra, P. orcid.org/0000-0002-1709-4686, Wagg, D.J. and Sims, N.D. (2019) Time domain analysis of structures with hysteretic vibration suppression systems. Journal of Physics: Conference Series, 1264. ISSN 1742-6588
Tang, N., Rongong, J.A. orcid.org/0000-0002-6252-6230 and Sims, N.D. orcid.org/0000-0002-6292-6736 (2018) Design of adjustable Tuned Mass Dampers using elastomeric O-rings. Journal of Sound and Vibration, 433. pp. 334-348. ISSN 0022-460X
Gibbons, T.J. orcid.org/0000-0002-5041-7053, Öztürk, E. and Sims, N.D. (2018) Rotational degree-of-freedom synthesis: An optimised finite difference method for non-exact data. Journal of Sound and Vibration, 412. pp. 207-221. ISSN 0022-460X
Scott, M., Green, P.L., O'Driscoll, D. et al. (2 more authors) (2016) Sensitivity analysis of an Advanced Gas-cooled Reactor control rod model. Nuclear Engineering and Design, 305. pp. 514-523. ISSN 0029-5493
Suzuki, H., Marshall, M.B., Sims, N.D. et al. (1 more author) (2016) Design and implementation of a non-resonant vibration-assisted machining device to create bespoke surface textures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062
Sims, N.D. (2015) Fast chatter stability prediction for variable helix milling tools. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science . Published online before print May 12, 2015. ISSN 0954-4062
Taylor, C.M. orcid.org/0000-0002-1325-7804, Turner, S., Papatheou, E. et al. (1 more author) (2013) Modelling of segmentation-driven vibration in machining. The International Journal of Advanced Manufacturing Technology, 66 (1-4). pp. 207-219. ISSN 0268-3768
Papatheou, E. and Sims, N.D. (2012) Developing a hardware in-the-loop simulator for a backpack energy harvester. Journal of Intelligent Material Systems and Structures , 23 (7). pp. 827-835. ISSN 1045-389X
Morales, A.L., Rongong, J.A. and Sims, N.D. (2012) A finite element method for active vibration control of uncertain structures. Mechanical Systems and Signal Processing, 32. pp. 79-93. ISSN 0888-3270
Yusoff, A.R. and Sims, N.D. (2011) Optimisation of variable helix tool geometry for regenerative chatter mitigation. International Journal of Machine Tools and Manufacture, 51 (2). pp. 133-141. ISSN 0890-6955
Sims, N.D. and Turner, S. (2011) The influence of feed rate on process damping in milling: Modelling and experiments. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 225 (6). pp. 799-810. ISSN 0954-4054
Mann, B.P. and Sims, N.D. (2010) On the performance and resonant frequency of electromagnetic induction energy harvesters. Journal of Sound and Vibration, 329 (9). pp. 1348-1361. ISSN 0022-460X
Sims, N.D., Manson, G. and Mann, B.P. (2010) Fuzzy stability analysis of regenerative chatter in milling. Journal of Sound and Vibration, 329 (8). pp. 1025-1041. ISSN 0022-460X
Taylor, C.M., Turner, S. and Sims, N.D. (2010) Chatter, process damping, and chip segmentation in turning: A signal processing approach. Journal of Sound and Vibration, 329 (23). pp. 4922-4935. ISSN 0022-460X
Yusoff, A., Turner, M.S., Taylor, C.M. et al. (1 more author) (2010) The role of tool geometry in process damped milling. The International Journal of Advanced Manufacturing Technology, 50 (9-12). pp. 883-895. ISSN 1433-3015
Batterbee, D. and Sims, N.D. (2009) Temperature sensitive controller performance of MR dampers. Journal of Intelligent Material Systems and Structures, 20 (3). pp. 297-309. ISSN 1045-389X
Mann, B.P. and Sims, N.D. (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration, 319 (1-2). pp. 515-530. ISSN 0022-460X
Sims, N.D., Mann, B. and Huyanan, S. (2008) Analytical prediction of chatter stability for variable pitch and variable helix milling tools. Journal of Sound and Vibration, 317 (3-5). pp. 664-686. ISSN 0022-460X
Batterbee, D.C., Sims, N.D., Stanway, R. et al. (1 more author) (2007) Magnetorheological landing gear: 1. A design methodology. Smart Materials and Structures, 16 (6). pp. 2429-2440. ISSN 0964-1726
Batterbee, D.C., Sims, N.D., Stanway, R. et al. (1 more author) (2007) Magnetorheological landing gear: 2. Validation using experimental data. Smart Materials and Structures, 16 (6). pp. 2441-2452. ISSN 0964-1726
Sims, N.D. (2007) Vibration absorbers for chatter suppression: A new analytical tuning methodology. Journal of Sound and Vibration, 301 (3-5). pp. 592-607. ISSN 0022-460X
Batterbee, D.C. and Sims, N.D. (2007) Hardware-in-the-loop simulation of magnetorheological dampers for vehicle suspension systems. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 221 (2). pp. 265-278. ISSN 0959-6518
Huyanan, S. and Sims, N.D. (2007) Vibration control strategies for proof-mass actuators. Journal of Vibration and Control, 13 (12). pp. 1785-1806. ISSN 1077-5463
Sims, N.D. (2006) Limit cycle behavior of smart fluid dampers under closed loop control. Journal of Vibration and Acoustics, Transactions of the ASME, 128 (4). pp. 413-428. ISSN 1528-8927
Sims, N.D. (2005) The self-excitation damping ratio: A chatter criterion for time-domain milling simulations. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 127 (3). pp. 433-445. ISSN 1087-1357
Beck, S.B.M., Curren, M.D., Sims, N.D. et al. (1 more author) (2005) Pipeline network features and leak detection by cross-correlation analysis of reflected waves. Journal of Hydraulic Engineering, 131 (8). pp. 715-723. ISSN 07339429
Batterbee, D.C. and Sims, N.D. (2005) Vibration isolation with smart fluid dampers: a benchmarking study. Smart Structures and Systems, 1 (3). pp. 235-256. ISSN 1738-1991
Proceedings Paper
Ozsoy, M. orcid.org/0000-0002-3069-7377, Dogan, H., Ozturk, E. et al. (2 more authors) (2022) Active chatter suppression through virtual inerter-based passive absorber control. In: Machining Innovations Conference for Aerospace Industry (MIC) 2022. 22nd Machining Innovations Conference for Aerospace Industry 2022 (MIC 2022), 30 Nov - 01 Dec 2022, Hannover, Germany. SSRN .
Deastra, P. orcid.org/0000-0002-1709-4686, Wagg, D.J. orcid.org/0000-0002-7266-2105 and Sims, N.D. orcid.org/0000-0002-6292-6736 (2021) Using a tuned-inerto-viscous-hysteretic-damper (TIVhD) for vibration suppression in multi-storey building structures. In: IOP Conference Series: Earth and Environmental Science. 2nd International Conference on Disaster and Management, 30 Sep - 01 Oct 2020, Padang, West Sumatra, Indonesia (online). IOP Publishing .
Nasir, A.M., Sims, N.D. and Wagg, D.J. orcid.org/0000-0002-7266-2105 (2020) Computing backbone curves for nonlinear oscillators with higher order polynomial stiffness terms. In: Papadrakakis, M., Fragiadakis, M. and Papadimitriou, C., (eds.) EURODYN 2020: Proceedings of the XI International Conference on Structural Dynamics. EURODYN 2020: XI International Conference on Structural Dynamics, 23-26 Nov 2020, Athens, Greece. European Association for Structural Dynamics (EASD) , pp. 318-334. ISBN 9786188507203
Ozsoy, M. orcid.org/0000-0002-3069-7377, Sims, N.D. orcid.org/0000-0002-6292-6736 and Ozturk, E. orcid.org/0000-0001-9982-2837 (2020) Investigation of an actively controlled robot arm for vibration suppression in milling. In: Papadrakakis, M., Fragiadakis, M. and Papadimitriou, C., (eds.) EURODYN 2020: Proceedings of the XI International Conference on Structural Dynamics. EURODYN 2020: XI International Conference on Structural Dynamics, 23-26 Nov 2020, Athens, Greece. European Association for Structural Dynamics (EASD) , pp. 4577-4589. ISBN 9786188507227
Dogan, H. orcid.org/0000-0002-6523-7290, Sims, N.D. orcid.org/0000-0002-6292-6736 and Wagg, D.J. orcid.org/0000-0002-7266-2105 (2020) The effects of parasitic mass on the performance of inerter-based dynamic vibration absorbers. In: Papadrakakis, M., Fragiadakis, M. and Papadimitriou, C., (eds.) EURODYN 2020: Proceedings of the XI International Conference on Structural Dynamics. EURODYN 2020: XI International Conference on Structural Dynamics, 23-26 Nov 2020, Athens, Greece. European Association for Structural Dynamics (EASD) , pp. 1545-1555. ISBN 9786188507227
De Domenico, D., Deastra, P. orcid.org/0000-0002-1709-4686, Ricciardi, G. et al. (2 more authors) (2019) Improved seismic base isolation combined with fluid inerter and tuned mass damper. In: Proceedings of the 16th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures. 16th World Conference on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (16 WCSI), 01-06 Jul 2019, St.Petersburg, Russia. Russian Association for Earthquake Engineering (RAEE) .
Deastra, P. orcid.org/0000-0002-1709-4686, Wagg, D.J. and Sims, N.D. (2018) Modelling the hysteretic behaviour of a fluid inerter for use as a parallel-viscous-inerter-damper device. In: 7th World Conference on Structural Control and Monitoring. 7th World Conference on Structural Control and Monitoring, 22-25 Jul 2018, Qingdao, China. International Association for Structural Control and Monitoring (IASCM) .
Sims, N.D. orcid.org/0000-0002-6292-6736 (2017) Multi-frequency Chatter Analysis Using the Shift Theorem. In: Wang, Z., Insperger, T. and Zhang, L., (eds.) Procedia IUTAM. IUTAM Symposium on Nonlinear and Delayed Dynamics of Mechatronic Systems, 17-21 Oct 2017, Nanjing, China. Elsevier , pp. 3-9.
Scott, M., Sims, N.D., Green, P.L. et al. (2 more authors) (2014) Sensitivity Analysis of an Advanced Gas-Cooled Reactor Control Rod Model. In: Proceedings of ISMA 2014, International Conference on Noise and Vibration Engineering. ISMA 2014, International Conference on Noise and Vibration Engineering, 15-17 Sep 2014, Leuven, Belgium. .