Browse by Academic Unit (A-Z)

Article

Ahmad, S. and Ahmed, H. orcid.org/0000-0001-8952-4190 (2023) Robust intrusion detection for resilience enhancement of industrial control systems: an extended state observer approach. IEEE Transactions on Industry Applications. ISSN 0093-9994

Ahmed, H. orcid.org/0000-0001-8952-4190 (2023) Single-phase SOGI-PLLs for fast and accurate frequency ramp tracking. IEEE Sensors Letters. pp. 1-4. ISSN 2475-1472

Ahmed, H. orcid.org/0000-0001-8952-4190, Ushirobira, R. and Efimov, D. (2023) Arbitrarily fast delayed signal cancellation PLL for grid‐integration of renewable energy sources. IET Renewable Power Generation. ISSN 1752-1416

Ait Hammouda, C., Bradai, R., Bendib, A. et al. (4 more authors) (2024) Modelling, control design, and analysis of the inner control's loops intended for single‐phase voltage‐controlled inverter‐based microgrid. IET Generation, Transmission & Distribution. ISSN 1751-8687

Alcock, J.A. and Baufeld, B. (2016) Diode laser welding of stainless steel 304L. Journal of Materials Processing Technology, 240. pp. 138-144. ISSN 0924-0136

Bagheri, F., Biricik, S. orcid.org/0000-0002-1559-2024, Ahmed, H. orcid.org/0000-0001-8952-4190 et al. (1 more author) (2023) A second‐order sliding mode control with active disturbance rejection for dynamic voltage restorers. IET Power Electronics. ISSN 1755-4535

Benyamina, F. orcid.org/0000-0003-4428-2225, Ahmed, H., Benrabah, A. orcid.org/0000-0002-6386-7571 et al. (3 more authors) (2023) Sequence extraction-based low voltage ride-through control of grid-connected renewable energy systems. Renewable and Sustainable Energy Reviews, 183. 113508. ISSN 1364-0321

Dutilleul, T. orcid.org/0000-0002-1138-4279, Widdison, R. and Kyffin, W. (2024) Development of electron optical capabilities for manufacturing of large components by electron beam welding. Welding in the World, 68 (4). pp. 819-828. ISSN 0043-2288

Griffin, J.M. orcid.org/0000-0002-9179-5130, Jones, S. orcid.org/0000-0003-0957-6375, Perumal, B. et al. (1 more author) (2023) Investigating the detection capability of acoustic emission monitoring to identify imperfections produced by the Metal Active Gas (MAG) welding process. Acoustics, 5 (3). pp. 714-745. ISSN 2624-599X

Jones, S.A. orcid.org/0000-0003-0957-6375 (2023) Advanced manufacturing applied to nuclear fusion – challenges and solutions. Journal of Physics: Energy, 5 (4). 042001. ISSN 2515-7655

Kherbachi, A. orcid.org/0000-0002-6166-7744, Chouder, A., Bendib, A. et al. (1 more author) (2023) Improved power computation method for droop‐controlled single‐phase VSIs in standalone microgrid considering non‐linear loads. IET Generation, Transmission and Distribution, 17 (7). pp. 1442-1460. ISSN 1751-8687

Kshirsagar, R., Jones, S. orcid.org/0000-0003-0957-6375, Lawrence, J. et al. (1 more author) (2020) Optimization of TIG welding parameters using a hybrid nelder mead-evolutionary algorithms method. Journal of Manufacturing and Materials Processing, 4 (1). 10.

Kshirsagar, R., Jones, S., Lawrence, J. et al. (1 more author) (2019) Prediction of bead geometry using a two-stage SVM–ANN algorithm for automated tungsten inert gas (TIG) welds. Journal of Manufacturing and Materials Processing, 3 (2). 39. ISSN 2504-4494

Laib, A., Chelabi, M., Terriche, Y. et al. (4 more authors) (2024) Enhanced complex wire fault diagnosis via integration of time domain reflectometry and particle swarm optimization with least square support vector machine. IET Science, Measurement & Technology. ISSN 1751-8822

Lais, H., Lowe, P.S., Gan, T.H. et al. (2 more authors) (2018) Characterization of the use of low frequency ultrasonic guided waves to detect fouling deposition in pipelines. Sensors, 18 (7). 2122.

Li, F. orcid.org/0000-0002-6413-3617, Hiley, J., Syed, T.M. et al. (2 more authors) (2019) A region segmentation method to measure multiple features using a tactile scanning probe. International Journal of Computer Integrated Manufacturing, 32 (6). pp. 569-579. ISSN 0951-192X

Li, F. orcid.org/0000-0002-6413-3617, Hitchens, C. and Stoddart, D. (2017) A performance evaluation method to compare the multi-view point cloud data registration based on ICP algorithm and reference marker. Journal of Modern Optics, 65 (1). pp. 30-37. ISSN 0950-0340

Li, F. orcid.org/0000-0002-6413-3617, Stoddart, D. and Hitchens, C. (2017) Method to Automatically Register Scattered Point Clouds Based on Principal Pose Estimation. Optical Engineering, 56 (4). 044107. ISSN 0091-3286

Lin Pay, M., Christensen, J., He, F. et al. (3 more authors) (2023) PLL-based enhanced control of boost PFC converter for smart farming lighting application. Renewable Energy Focus, 47. 100502. ISSN 1755-0084

Litwa, P., Hernandez-Nava, E., Guan, D. et al. (2 more authors) (2021) The additive manufacture processing and machinability of CrMnFeCoNi high entropy alloy. Materials & Design, 198. 109380. ISSN 0264-1275

Lowe, P., Duan, W., Kanfoud, J. et al. (1 more author) (2017) Structural health monitoring of above-ground storage tank floors by ultrasonic guided wave excitation on the tank wall. Sensors, 17 (11). 2542. ISSN 1424-8220

Lowe, P.S., Honey, X., Crossley, J. et al. (3 more authors) (2022) Scaling-up ultrasonic vibration assisted additive manufacturing to build 316 L 3 m3 waste container flange. Journal of Manufacturing Processes, 83. pp. 97-104. ISSN 1526-6125

Lubaszka, P. and Baufeld, B. orcid.org/0000-0003-3915-2485 (2018) Powder blown laser cladding of vertical surfaces. Lasers in Engineering, 39 (1-2). pp. 35-52. ISSN 0898-1507

Sevilmiş, F. orcid.org/0000-0002-6059-9583, Karaca, H. orcid.org/0000-0002-5561-489X and Ahmed, H. orcid.org/0000-0001-8952-4190 (2023) High-order delayed signal cancellation-based PLL under harmonically distorted grid voltages. IEEE Transactions on Instrumentation and Measurement. ISSN 0018-9456

Shakspeare, A. orcid.org/0000-0002-9299-0464, Moore, H., Service, M. et al. (4 more authors) (2023) Gaping behaviour of Blue mussels (Mytilus edulis) in relation to freshwater runoff risks. Aquaculture Reports, 33. 101719. ISSN 2352-5134

Sunny, A.I., Zhao, A., Li, L. et al. (1 more author) (2021) Low-cost IoT-based sensor system: A case study on harsh environmental monitoring. Sensors, 21 (1). 214. ISSN 1424-8220

Tunc, L.T. and Shaw, J. (2016) Investigation of the effects of Stewart platform-type industrial robot on stability of robotic milling. International Journal of Advanced Manufacturing Technology, 87 (1). pp. 189-199. ISSN 0268-3768

Tunc, L.T. and Stoddart, D. (2017) Tool path pattern and feed direction selection in robotic milling for increased chatter-free material removal rate. International Journal of Advanced Manufacturing Technology. pp. 1-12. ISSN 0268-3768

Verma, A.K. orcid.org/0000-0002-8719-4869, Ahmed, H. orcid.org/0000-0001-8952-4190, Burgos-Mellado, C. orcid.org/0000-0003-1990-0191 et al. (2 more authors) (2023) Enhanced two consecutive samples based de-modulation technique for atomic force microscopy application. Measurement, 223. 113731. ISSN 0263-2241

Wika, K.K. orcid.org/0000-0001-8422-9416, Gurdal, O., Litwa, P. et al. (1 more author) (2019) Influence of supercritical CO2 cooling on tool wear and cutting forces in the milling of Ti-6Al-4V. Procedia CIRP, 82. pp. 89-94. ISSN 2212-8271

Wika, K.K. orcid.org/0000-0001-8422-9416, Litwa, P. and Hitchens, C. orcid.org/0000-0003-1093-0298 (2019) Impact of supercritical carbon dioxide cooling with Minimum Quantity Lubrication on tool wear and surface integrity in the milling of AISI 304L stainless steel. Wear, 426-427 (Part B). pp. 1691-1701. ISSN 0043-1648

Wrigley, P.A., Wood, P., Stewart, P. et al. (2 more authors) (2019) Module layout optimization using a genetic algorithm in light water modular nuclear reactor power plants. Nuclear Engineering and Design, 341. pp. 100-111. ISSN 0029-5493

Zhang, B. orcid.org/0000-0001-7327-0923 and Billings, S.A. (2016) Volterra Series Truncation and Kernel Estimation of Nonlinear Systems in the Frequency Domain. Mechanical Systems and Signal Processing, 84 (A). pp. 39-57. ISSN 0888-3270

Proceedings Paper

Gurdal, O., Rae, B., Zonuzi, A. et al. (1 more author) (2020) Vision-assisted robotic finishing of friction stir-welded corner joints. In: Denkena, B., (ed.) Procedia Manufacturing. 19th Machining Innovations Conference for Aerospace Industry 2019 (MIC 2019), 27-28 Nov 2019, Garbsen, Germany. Elsevier BV , pp. 70-76.

Li, F.. orcid.org/0000-0002-6413-3617, Stoddart, D. orcid.org/0000-0002-8400-3190 and Zwierzak, I. (2017) A performance test for a fringe projection scanner in various ambient light conditions. In: Procedia CIRP. 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '16, 20-22 Jul 2016, Ischia, Italy. Elsevier , pp. 400-404.

Litwa, P., Wika, K.K. orcid.org/0000-0001-8422-9416, Zonuzi, A. et al. (1 more author) (2019) The influence of cutting conditions on surface integrity in high feed milling of Ti-6Al-4V with supercritical CO2 cooling. In: MM Science Journal Special Issue: HSM 2019. 15th International Conference on High Speed Machining, 08-09 Oct 2019, Prague, Czech Republic. MM Publishing, s.r.o. , pp. 3071-3077.

Maurotto, A. orcid.org/0000-0002-5023-4433, Gu, Y., Tsivoulas, D. et al. (1 more author) (2016) Surface Integrity of SA508 Gr 3 Subjected to Abusive Milling Conditions. In: Procedia CIRP. 3rd CIRP Conference on Surface Integrity, 08-10 Jun 2016, Charlotte, NC, USA. Elsevier , pp. 279-282.

Pay, M.L., Christensen, J., He, F. et al. (3 more authors) (2023) A comparative study of FLL and PLL in boost PFC converter control for smart greenhouse farming application. In: 2023 IEEE International Conference on Agrosystem Engineering, Technology & Applications (AGRETA) Proceedings. 2023 IEEE International Conference on Agrosystem Engineering, Technology & Applications (AGRETA), 09 Sep 2023, Shah Alam, Malaysia. Institute of Electrical and Electronics Engineers (IEEE) . ISBN 9798350347340

Wrigley, P., Hall, R., Wood, P. et al. (3 more authors) (2019) Automated design techniques for new nuclear power plant design : knowledge based engineering, generative design and optimisation. In: The 27th International Conference on Nuclear Engineering (ICONE27). The 27th International Conference on Nuclear Engineering (ICONE27), 19-24 May 2019, Tsukuba, Ibaraki, Japan. The Japan Society of Mechanical Engineers . ISBN 9784888983051

Zwierzak, I., Stoddart, D. orcid.org/0000-0002-8400-3190 and Hitchens, C. orcid.org/0000-0003-1093-0298 (2017) Imaging solutions for harsh environments. In: Procedia CIRP. 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering. Elsevier BV , pp. 396-399.