Conjugate Heat Transfer CFD Predictions of Impingement Jet Array Flat Wall Cooling Aerodynamics with Single Sided Flow Exit

Conjugate heat transfer CFD studies were undertaken on impingement square jet arrays with self induced crossflow in the impingement gap with a single sided exit. The aim was to understand the aerodynamic interactions that result in the deterioration of heat transfer with axial distance, whereas the addition of duct flow heat transfer would be expected to lead to an increase in heat transfer with axial distance. A square array of impingement holes was investigated for a common geometry investigated experimentally, pitch to diameter ratio X/D of 5 and impingement gap to diameter ratio Z/D of 3.3 for 11 rows of holes in the crossflow direction. A metal duct wall was used as the impingement surface with an applied heat flux of 100kW/m(2), which for a gas turbine combustor cooling application operating at steady state with a temperature difference of similar to 450K corresponds to a convective heat transfer coefficient of similar to 200 W/m(2)K. A key feature of the predicted aerodynamics was recirculation in the plane of the impingement jets normal to the cross-flow, which produced heating of the impingement jet wall. This reverse flow jet was deflected by the cross flow which had its peak velocity in the plane between the high velocity impingement jets. The cross-flow interaction with the impingement jets reduced the interaction between the jets on the surface, with lower surface turbulence as a result and this reduced the surface convective heat transfer. A significant feature of the predictions was the interaction of the cross-flow aerodynamics with the impingement jet wall and associated heat transfer to that wall. The results showed that the deterioration in heat transfer with axial distance was well predicted, together with predictions of the impingement wall surface temperature gradients.