Design of a steady-state in situ test to determine the air permeability coefficient of covercrete

An in situ air permeability test method that does not require assumptions for the often-difficult unidirectional flow has been developed to calculate the air permeability coefficient of the near surface concrete. The proposed method involves applying a constant pressure head to a surface mounted ring and measuring the steady state air flow rates. The analysis is based on modification of the flownet theory, which needs a calibration factor accounting for the influence of specimen and ring geometries. Effects of test area, width of seal, depth and width of test specimen were investigated using numerical simulation of the air flow. The repeatability of the proposed test method was assessed by the signal noise ratio (SNR) and discrimination ratio (DR). A new formula is offered and it only requires the steady state air flow rate to calculate the coefficient of air permeability, thus assisting engineers and researchers to quickly determine this property of structural concretes.