Items where authors include "Salman, A.D."

Article

Monaco, D. orcid.org/0000-0002-9455-4404, Reynolds, G.K. orcid.org/0000-0002-9592-8228, Tajarobi, P. orcid.org/0000-0001-8837-0310 et al. (2 more authors) (2023) Modelling the effect of L/S ratio and granule moisture content on the compaction properties in continuous manufacturing. International Journal of Pharmaceutics, 633. 122624. ISSN 0378-5173

Bozon, A., Fries, L., Kammerhofer, J. et al. (4 more authors) (2022) Effect of heterogeneous hydrophobic coating on floating of insoluble particles. Powder Technology, 395. pp. 592-603. ISSN 0032-5910

Bellinghausen, S., Gavi, E., Jerke, L. et al. (3 more authors) (2022) Model-driven design using population balance modelling for high-shear wet granulation. Powder Technology, 396 (Part A). pp. 578-595. ISSN 0032-5910

Angelopoulou, D., Meunier, V., Forny, L. et al. (3 more authors) (2021) Influence of localized thermal effects on the reconstitution kinetics of lactose-coated whole milk powder. Food Research International, 150 (Part A). 110774. ISSN 0963-9969

Monaco, D., Omar, C., Reynolds, G.K. et al. (3 more authors) (2021) Drying in a continuous wet granulation line: Investigation of different end of drying control methods. Powder Technology, 392. pp. 157-166. ISSN 0032-5910

Angelopoulou, D., Meunier, V., Forny, L. et al. (3 more authors) (2021) Particle surface design for enhanced reconstitution of fat-based food powders. Powder Technology, 393. pp. 397-404. ISSN 0032-5910

AlAlaween, W.H., Mahfouf, M. orcid.org/0000-0002-7349-5396 and Salman, A.D. (2021) When swarm meets fuzzy logic: Batch optimisation for the production of pharmaceuticals. Powder Technology, 379. pp. 174-183. ISSN 0032-5910

Mundozah, A.L., Yang, J., Omar, C. orcid.org/0000-0002-7839-608X et al. (2 more authors) (2020) Twin screw granulation : a simpler re-derivation of quantifying fill level. International Journal of Pharmaceutics, 591. 119959. ISSN 0378-5173

Li, F., Hounslow, M.J. orcid.org/0000-0003-0439-3641, Litster, J.D. orcid.org/0000-0003-4614-3501 et al. (1 more author) (2020) Fluidized bed : online monitoring of particle temperature using a thermal camera. Chemical Engineering Research and Design, 161. pp. 95-102. ISSN 0263-8762

Mitchell, W.R., Forny, L., Althaus, T. et al. (4 more authors) (2020) Tracking of powder lump formation and dispersion with the use of FBRM technology and video recordings. Powder Technology, 367. pp. 10-19. ISSN 0032-5910

Yu, M., Omar, C., Weidemann, M. et al. (3 more authors) (2020) Roller compaction: Infrared thermography as a PAT for monitoring powder flow from feeding to compaction zone. International Journal of Pharmaceutics, 578. 119114. ISSN 0378-5173

Yu, M., Weidemann, M., Omar, C.S. et al. (3 more authors) (2020) Application of feeding guiders to improve the powder distribution in the two scales of roller compactors. International Journal of Pharmaceutics, 573. ISSN 0378-5173

Mundozah, A.L. orcid.org/0000-0002-4163-7679, Tridon, C.C., Cartwright, J.J. et al. (2 more authors) (2019) Wetting of binary powder mixtures. International Journal of Pharmaceutics, 572. 118770. ISSN 0378-5173

Bellinghausen, S.., Gavi, E., Jerke, L. et al. (3 more authors) (2019) Nuclei size distribution modelling in wet granulation. Chemical Engineering Science: X, 4. 100038. ISSN 2590-1400

Mundozah, A.L. orcid.org/0000-0002-4163-7679, Yang, J., Tridon, C.C. et al. (3 more authors) (2019) Assessing particle segregation using near-infrared chemical imaging in twin screw granulation. International Journal of Pharmaceutics, 568. 118541. ISSN 0378-5173

Nnaedozie, C.C., Sanders, C., Montes, E.C. et al. (4 more authors) (2019) Investigation of rehydration of food powder mixtures. Powder Technology, 353. pp. 311-319. ISSN 0032-5910

Yang, J., Salman, A.D. orcid.org/0000-0001-6766-7254 and Blanco-García, P. (2019) A review of measurement techniques of mechanical properties of the catalyst layer in catalytic converters. Johnson Matthey Technology Review, 63 (3). pp. 177-190.

Mitchell, W.R., Forny, L., Althaus, T. et al. (4 more authors) (2019) Surface tension-driven effects in the reconstitution of food powders. Chemical Engineering Research and Design, 146. pp. 464-469. ISSN 0263-8762

Mahmah, O., Adams, M.J., Omar, C.S. orcid.org/0000-0002-7839-608X et al. (2 more authors) (2019) Roller compaction : ribbon splitting and sticking. International Journal of Pharmaceutics, 559. pp. 156-172. ISSN 0378-5173

Omar, C.S. orcid.org/0000-0002-7839-608X, Al-Asady, R.B. and Salman, A.D. orcid.org/0000-0001-6766-7254 (2019) Roller compaction : improving the homogeneity of ribbon properties along the roller width. Powder Technology, 342. pp. 464-474. ISSN 0032-5910

Fries, L., Dupas, J., Bellamy-Descamps, M. et al. (3 more authors) (2019) Bonding regime map for roller compaction of amorphous particles. POWDER TECHNOLOGY, 341. pp. 51-58. ISSN 0032-5910

Mundozah, A.L. orcid.org/0000-0002-4163-7679, Cartwright, J.J., Tridon, C.C. et al. (2 more authors) (2019) Hydrophobic/hydrophilic powders : practical implications of screw element type on the reduction of fines in twin screw granulation. Powder Technology, 341. pp. 94-103. ISSN 0032-5910

Khorsheed, B. orcid.org/0000-0001-6337-4841, Gabbott, I., Reynolds, G.K. et al. (3 more authors) (2019) Twin-screw granulation: Understanding the mechanical properties from powder to tablets. Powder Technology, 341. pp. 104-115. ISSN 0032-5910

Rajkumar, A.D., Reynolds, G.K., Wilson, D. et al. (2 more authors) (2019) The effect of roller compaction and tableting stresses on pharmaceutical tablet performance. Powder Technology, 341. pp. 23-37. ISSN 0032-5910

Al Asady, R.B., Hounslow, M.J. orcid.org/0000-0003-0439-3641 and Salman, A.D. orcid.org/0000-0001-6766-7254 (2018) Roller compaction : the effect of plastic deformation of primary particles with wide range of mechanical properties. Drug Delivery and Translational Research, 8 (6). pp. 1615-1634. ISSN 2190-393X

Omar, C.S. orcid.org/0000-0002-7839-608X, Hounslow, M.J. orcid.org/0000-0003-0439-3641 and Salman, A.D. (2018) Implementation of an online thermal imaging to study the effect of process parameters of roller compactor. Drug Delivery and Translational Research, 8 (6). pp. 1604-1614. ISSN 2190-393X

Yang, J., Blanco-Garcia, P., Holt, E.M. et al. (3 more authors) (2018) Adhesive strength measurement of catalyst support. Powder Technology, 340. pp. 465-472. ISSN 0032-5910

Yu, M., Omar, C., Schmidt, A. et al. (2 more authors) (2018) Improving feeding powder distribution to the compaction zone in the roller compaction. European Journal of Pharmaceutics and Biopharmaceutics, 128. pp. 57-68.

Lute, S.V., Dhenge, R.M. orcid.org/0000-0001-7517-6893 and Salman, A.D. orcid.org/0000-0001-6766-7254 (2018) Twin screw granulation : effects of properties of primary powders. Pharmaceutics, 10 (2). 68.

Lute, S.V., Dhenge, R.M. orcid.org/0000-0001-7517-6893 and Salman, A.D. orcid.org/0000-0001-6766-7254 (2018) Twin screw granulation : an investigation of the effect of barrel fill level. Pharmaceutics, 10 (2). 67.

Al Hassn, A.Z., Jeßberger, S., Hounslow, M.J. orcid.org/0000-0003-0439-3641 et al. (1 more author) (2018) Multi-stage granulation : an approach to enhance final granule attributes. Chemical Engineering Research and Design, 134. pp. 26-35. ISSN 0263-8762

Mundozah, A.L. orcid.org/0000-0002-4163-7679, Cartwright, J.J., Tridon, C.C. et al. (2 more authors) (2018) Hydrophobic/hydrophilic static powder beds : competing horizontal spreading and vertical imbibition mechanisms of a single droplet. Powder Technology, 330. pp. 275-283. ISSN 0032-5910

Ai, Q., Hounslow, M.J. orcid.org/0000-0003-0439-3641 and Salman, A.D. orcid.org/0000-0001-6766-7254 (2018) Twin screw granulation : an evaluation of using micronized lactose as a solid binder. Chemical Engineering Research and Design, 133. pp. 281-293. ISSN 0263-8762

Yang, J., Holt, E.M., Huang, K. et al. (4 more authors) (2018) Cohesive strength measurement of catalyst layer : uniform drying and on-line monitoring. Chemical Engineering Research and Design, 132. pp. 1117-1130. ISSN 0263-8762

Haider, C.I., Niederreiter, G., Palzer, S. et al. (2 more authors) (2018) Unwanted agglomeration of industrial amorphous food powder from a particle perspective. Chemical Engineering Research and Design, 132. pp. 1160-1169. ISSN 0263-8762

AlAlaween, W., Khorsheed, B., Mahfouf, M. et al. (3 more authors) (2018) Transparent predictive modelling of the twin screw granulation process using a compensated interval type-2 fuzzy system. European Journal of Pharmaceutics and Biopharmaceutics, 124. pp. 138-146. ISSN 0939-6411

Islam, S.F., Wysokinski, T.W., Belev, G. et al. (5 more authors) (2018) Food suspensions study with SR microtomography. Chemical Engineering Science, 175. pp. 208-219. ISSN 0009-2509

AlAlaween, W.H., Mahfouf, M. and Salman, A.D. (2017) Integrating the physics with data analytics for the hybrid modeling of the granulation process. AIChE Journal, 63 (11). pp. 4761-4773. ISSN 0001-1541

Islam, S.F., Mancini, L., Sundara, R.V. et al. (4 more authors) (2017) Studying model suspensions using high resolution synchrotron X-ray microtomography. Chemical Engineering Research and Design, 117. pp. 756-772. ISSN 0263-8762

AlAlaween, W.H., Mahfouf, M. and Salman, A.D. (2016) Predictive modelling of the granulation process using a systems-engineering approach. Powder Technology, 302. pp. 265-274. ISSN 0032-5910

Ai, Q., Dhenge, R.M. orcid.org/0000-0001-7517-6893, Hounslow, M.J. et al. (1 more author) (2016) Developing a miniaturized approach for formulation development using twin screw granulation. Powder Technology, 300. pp. 83-91. ISSN 0032-5910

Rajkumar, A.D., Reynolds, G.K., Wilson, D. et al. (3 more authors) (2016) Investigating the effect of processing parameters on pharmaceutical tablet disintegration using a real-time particle imaging approach. European Journal of Pharmaceutics and Biopharmaceutics, 106. pp. 88-96. ISSN 0939-6411