Items where authors include "Mumtaz, K.A."
Up a levelArticle
Bharaj, K., Paul, S. orcid.org/0000-0001-8990-0539, Mumtaz, K.A. orcid.org/0000-0001-8083-1661 et al. (2 more authors) (2020) Fabricating poly(methyl methacrylate) parts using high-speed sintering. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 234 (1-2). pp. 118-125. ISSN 0954-4054
Galindo-Fernandez, M., Mumtaz, K.A., Rivera-Diaz-del-Castillo, P.E.J. et al. (2 more authors) (2018) A microstructure sensitive model for deformation of Ti-6Al-4V describing Cast-and-Wrought and Additive Manufacturing morphologies. Materials and Design, 160. pp. 350-362. ISSN 0261-3069
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. orcid.org/0000-0001-8083-1661 (2018) Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V. Journal of Materials Engineering and Performance, 27 (8). pp. 4059-4068. ISSN 1059-9495
Zavala-Arredondo, M., Ali, H., Groom, K.M. et al. (1 more author) (2018) Investigating the melt pool properties and thermal effects of multi-laser diode area melting. International Journal of Advanced Manufacturing Technology, 97 (1-4). pp. 1383-1396. ISSN 0268-3768
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. (2018) Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach. International Journal of Advanced Manufacturing Technology, 97 (5-8). pp. 2621-2633. ISSN 0268-3768
Zavala-Arredondo, M., Groom, K.M. and Mumtaz, K.A. (2018) Diode area melting single-layer parametric analysis of 316L stainless steel powder. The International Journal of Advanced Manufacturing Technology, 94. pp. 2563-2576. ISSN 0268-3768
Ali, H., Ghadbeigi, H. and Mumtaz, K.A. (2018) Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 712. pp. 175-187. ISSN 0921-5093
Vora, P., Martinez, R., Hopkinson, N. et al. (2 more authors) (2017) Customised Alloy Blends for In-Situ Al339 Alloy Formation Using Anchorless Selective Laser Melting. Technologies, 5 (2). 24. ISSN 2227-7080
Zavala-Arredondo, M., Boone, N., Willmott, J. et al. (4 more authors) (2017) Laser Diode Area Melting for High Speed Additive Manufacturing of Metallic Components. Materials and Design, 117. pp. 305-315. ISSN 0261-3069
Mumtaz, K.A. and ali, H. (2017) In-Built Customised Mechanical Failure of 316L Components Fabricated Using Selective Laser Melting. Technologies, 5 (1). 9.
Pitt, K., Lopez, O., Lafferty, A.D. et al. (2 more authors) (2017) Investigation into the material properties of wooden composite structures with in-situ fibre reinforcement using additive manufacturing. Composites Science and Technology, 138. pp. 32-39. ISSN 0266-3538
Lopez-Botello, O., Martinez-Hernandez, U., Ramírez, J. et al. (2 more authors) (2017) Two-dimensional simulation of grain structure growth within selective laser melted AA-2024. Materials and Design, 113. pp. 369-376. ISSN 0261-3069
Mumtaz, K.A., Harrison, N. and todd, I. (2015) Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach. Acta Materialia, 94. 59 - 68 . ISSN 1359-6454
Mumtaz, K.A., Todd, I., Hopkinson, N. et al. (1 more author) (2015) AlSi12 In-Situ Alloy Formation and Residual Stress Reduction using Anchorless Selective Laser Melting. Additive Manufacturing, 7. pp. 12-19. ISSN 2214-860
Mumtaz, K.A. and Hopkinson, N. (2010) Selective Laser Melting of thin wall parts using pulse shaping. Journal of Materials Processing Technology, 210 (2). pp. 279-287. ISSN 0924-0136
Mumtaz, K.A. and Hopkinson, N. (2010) Selective laser melting of Inconel 625 using pulse shaping. Rapid Prototyping Journal, 16 (4). pp. 248-257. ISSN 1355-2546
Mumtaz, K.A. and Hopkinson, N. (2009) Top surface and side roughness of Inconel 625 parts processed using selective laser melting. Rapid Prototyping Journal, 15 (2). pp. 96-103. ISSN 1355-2546
Mumtaz, K.A., Erasenthiran, P. and Hopkinson, N. (2008) High density selective laser melting of Waspaloy (R). J MATER PROCESS TECH, 195 (1-3). pp. 77-87. ISSN 0924-0136
Mumtaz, K.A. and Hopkinson, N. (2007) Laser melting functionally graded composition of Waspaloy((R)) and Zirconia powders. Journal of Materials Science, 42 (18). pp. 7647-7656. ISSN 0022-2461
Proceedings Paper
Lopez, O., Martínez-Hernández, U., Ramírez, J. et al. (2 more authors) (2016) Simulating the microstructural evolution of a Selective Laser Melted AA-2024. In: Solid Freeform Fabrication 2016: Proceedings of the 27th Annual International. Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, August 8-10, 2016, Austin, Texas. Laboratory for Freeform Fabrication and University of Texas at Austin , pp. 257-267.
Vora, P., Derguti, F., Mumtaz, K.A. et al. (2 more authors) (2013) Investigating a Semi-Solid Processing technique using metal powder bed Additive Manufacturing Processes. In: Proceedings Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium, 05-07 Aug 2013, Austin Texas, USA. , pp. 454-462.
Mumtaz, K.A., Hopkinson, N., Stapleton, D. et al. (3 more authors) (2012) Benchmarking metal powder bed Additive Manufacturing processes (SLM and EBM) to build flat overhanging geometries without supports. In: Proceeding Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium, 06-08 Aug 2012, Austin Texas, USA. .
Mumtaz, K.A., Vora, P. and Hopkinson, N. (2011) A Method to Eliminate Anchors/Supports from Directly Laser Melted Metal Powder Bed Processes. In: Proc. Solid Freeform Fabrication Symposium. Proc. Solid Freeform Fabrication Symposium, 2011-08, Austin Texas, USA. , pp. 55-64.
Mumtaz, K.A. and Hopkinson, N. (2008) Selective Laser Melting of Inconel 625 using Pulse Shaping. In: Proc. Solid Freeform Fabrication Symposium. Proc. Solid Freeform Fabrication Symposium, Austin Texas, USA. , pp. 165-178.
Mumtaz, K.A., Hopkinson, N. and Erasenthiran, P. (2006) High Density Selective Laser Melting of Waspaloy. In: Proc. Solid Freeform Fabrication Symposium. Proc. Solid Freeform Fabrication Symposium, 2011-08, Austin Texas, USA. , pp. 220-232.