Browse by Academic Unit (A-Z)

Article

Aljaafreh, A., Elzagzoug, E.Y., Abukhait, J. et al. (4 more authors) (2023) A real-time olive fruit detection for harvesting robot based on YOLO algorithms. Acta Technologica Agriculturae, 26 (3). pp. 121-132. ISSN 1338-5267

Bagni, C. orcid.org/0000-0003-1614-3009, Askes, H. and Aifantis, E.C. (2017) Gradient-enriched finite element methodology for axisymmetric problems. Acta Mechanica. pp. 1-22. ISSN 0001-5970

Baines, T., Ziaee Bigdeli, A., Bustinza, O.F. et al. (3 more authors) (2017) Servitization: revisiting the state-of-the-art and research priorities. International Journal of Operations and Production Management, 37 (2). pp. 256-278. ISSN 0144-3577

Bourgenot, C. orcid.org/0000-0002-0458-9321, Krumins, V., Bramall, D.G. et al. (1 more author) (2024) Topology optimization of a single-point diamond-turning fixture for a deployable primary mirror telescope. Aerospace, 11 (1). 50. ISSN 2226-4310

Casamayor, Jose L. orcid.org/0000-0001-8497-2947, Su, Daizhong orcid.org/0000-0002-9541-8869 and Wu, You orcid.org/0000-0002-3639-2515 (2022) Eco-redesign of lighting products. LEUKOS. ISSN 1550-2724

Cebecioglu, B.B. orcid.org/0000-0001-5988-4718, Mo, Y.K. orcid.org/0000-0003-4096-1669, Dinh-Van, S. orcid.org/0000-0002-2734-3156 et al. (6 more authors) (2022) Sub-6 GHz channel modeling and evaluation in indoor industrial environments. IEEE Access, 10. pp. 127742-127753. ISSN 2169-3536

Collinson, M.G. orcid.org/0000-0002-4855-1878, Bower, M.P., Swait, T.J. et al. (3 more authors) (2022) Novel composite curing methods for sustainable manufacture : a review. Composites Part C: Open Access, 9. 100293.

Collinson, M.G., Swait, T.J. orcid.org/0000-0003-3199-7870, Bower, M.P. et al. (2 more authors) (2023) Development and implementation of direct electric cure of plain weave CFRP composites for aerospace. Composites Part A: Applied Science and Manufacturing, 172. 107615. ISSN 1359-835X

Corden, T. orcid.org/0000-0002-3414-8295, Dickinson, C., Hewison, R. et al. (2 more authors) (2021) Double diaphragm compression moulding, comparing thermoset prepreg with dry fabric and liquid resin. SAMPE Journal, 2021 (Mar/Apr). pp. 22-32. ISSN 0091-1062

Crüwell, S. orcid.org/0000-0003-4178-5820, Apthorp, D. orcid.org/0000-0001-5785-024X, Baker, B.J. orcid.org/0000-0002-1697-4198 et al. (9 more authors) (2023) What’s in a badge? A computational reproducibility investigation of the Open Data badge policy in one issue of Psychological Science. Psychological Science, 34 (4). 512 -522. ISSN 0956-7976

Cunningham, K. (2020) Beyond boundaries: developing grant writing skills across higher education institutions. Journal of Research Administration, 51 (2). pp. 41-57. ISSN 1539-1590

Depboylu, F.N., Yasa, E. orcid.org/0000-0001-5443-3598, Poyraz, O. et al. (1 more author) (2023) Thin-walled commercially pure titanium structures: laser powder bed fusion process parameter optimization. Machines, 11 (2). 272. ISSN 2075-1702

Dominguez-Caballero, J. orcid.org/0000-0001-7329-9929, Ayvar-Soberanis, S. orcid.org/0000-0002-1899-9743, Kim, J. et al. (3 more authors) (2023) Hybrid simultaneous laser- and ultrasonic-assisted machining of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1903-1916. ISSN 0268-3768

Duboust, N. orcid.org/0000-0001-7960-0196, Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Pinna, C. orcid.org/0000-0002-9079-1381 et al. (4 more authors) (2016) An optical method for measuring surface roughness of machined Carbon Fibre Reinforced Plastic composites. Journal of Composite Materials. ISSN 0021-9983

Duboust, N. orcid.org/0000-0001-7960-0196, Melis, D., Pinna, C. orcid.org/0000-0002-9079-1381 et al. (4 more authors) (2016) Machining of Carbon Fibre: Optical Surface Damage Characterisation and Tool Wear Study. Procedia CIRP, 45. pp. 71-74. ISSN 2212-8271

El-Dessouky, H.M. and McHugh, C. (2022) Multifunctional auxetic and honeycomb composites made of 3D woven carbon fibre preforms. Scientific Reports, 12 (1). 22593. ISSN 2045-2322

Fidan, I. orcid.org/0000-0002-4233-1049, Huseynov, O., Ali, M.A. et al. (10 more authors) (2023) Recent inventions in additive manufacturing: holistic review. Inventions, 8 (4). 103. ISSN 2411-5134

Garwood, T.L. orcid.org/0000-0003-4793-2713, Hughes, B.R., Oates, M.R. et al. (2 more authors) (2018) A review of energy simulation tools for the manufacturing sector. Renewable and Sustainable Energy Reviews, 81 (1). pp. 895-911. ISSN 1364-0321

Giasin, K. orcid.org/0000-0002-3992-8602 and Ayvar-Soberanis, S. (2016) Evaluation of Workpiece Temperature during Drilling of GLARE Fiber Metal Laminates Using Infrared Techniques: Effect of Cutting Parameters, Fiber Orientation and Spray Mist Application. Materials, 9 (8). 622. ISSN 1996-1944

Giasin, K. orcid.org/0000-0002-3992-8602, Ayvar-Soberanis, S., French, T. et al. (1 more author) (2017) 3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis. Applied Composite Materials, 24 (1). pp. 113-137. ISSN 0929-189X

Gossmann, T.I., Shanmugasundram, A., Börno, S. et al. (20 more authors) (2019) Ice-age climate adaptations trap the Alpine marmot in a state of low genetic diversity. Current Biology, 29 (10). pp. 1712-1720. ISSN 0960-9822

Griffin, A., Hughes, R. orcid.org/0000-0001-7764-5331, Freeman, C. et al. (4 more authors) (2019) Using advanced manufacturing technology for smarter construction. Proceedings of the Institution of Civil Engineers - Civil Engineering, 172 (6). pp. 15-21. ISSN 0965-089X

Hollander, J. orcid.org/0000-0002-4207-2956, Montaño-Rendón, M., Bianco, G. et al. (5 more authors) (2018) Are assortative mating and genital divergence driven by reinforcement? Evolution Letters, 2 (6). pp. 557-566. ISSN 2056-3744

Horton, P., Koh, L. and Guang, V.S. (2016) An integrated theoretical framework to enhance resource efficiency, sustainability and human health in agri-food systems. Journal of Cleaner Production, 120. pp. 164-169. ISSN 0959-6526

Ilyas, I., Taylor, C. orcid.org/0000-0002-1325-7804, Dalgarno, K. et al. (1 more author) (2010) Design and manufacture of injection mould tool inserts produced using indirect SLS and machining processes. Rapid Prototyping Journal, 16 (6). pp. 429-440. ISSN 1355-2546

Islam, S.F., Wysokinski, T.W., Belev, G. et al. (5 more authors) (2018) Food suspensions study with SR microtomography. Chemical Engineering Science, 175. pp. 208-219. ISSN 0009-2509

Islam, S.F. orcid.org/0000-0003-1587-7908, Hawkins, S.M., Meyer, J.L.L. et al. (1 more author) (2022) Evaluation of different particle size distribution and morphology characterization techniques. Additive Manufacturing Letters, 3. 100077. ISSN 2772-3690

Kerrigan, K.M. orcid.org/0000-0001-6048-9408 and Scaife, R.J. (2018) Wet vs dry CFRP drilling: Influence of cutting fluid on tool performance. Procedia CIRP, 77. pp. 315-319. ISSN 2212-8271

Lee, C. H., Sapuan, S. M., Lee, J. H. et al. (1 more author) (2016) Melt volume flow rate and melt flow rate of kenaf fibre reinforced Floreon/magnesium hydroxide biocomposites. SpringerPlus, 5. 1680. ISSN 2193-1801

Liu, F., Brash, A.J., O'Hara, J. et al. (11 more authors) (2017) High Purcell factor generation of coherent on-chip single photons. arXiv. (Unpublished)

Makhonin, M.N., Dixon, J.E., Coles, R.J. et al. (4 more authors) (2015) On-chip resonantly-driven quantum emitter with enhanced coherence. arXiv. (Unpublished)

Mathew, J., Kshirsagar, R., Abidin, D.Z. et al. (5 more authors) (2023) A comparison of machine learning methods to classify radioactive elements using prompt-gamma-ray neutron activation data. Scientific Reports, 13. 9948. ISSN 2045-2322

Maurotto, A. and Wickramarachchi, C. (2016) Experimental investigations on effects of frequency in ultrasonically-assisted end-milling of AISI 316L: a feasibility study. Ultrasonics, 65. 113 - 120. ISSN 1874-9968

Nuhiji, B., Bower, M.P., Proud, W.A.E. et al. (4 more authors) (2021) The effects of absorbing materials on the homogeneity of composite heating by microwave radiation. Materials, 14 (23). 7362. ISSN 1996-1944

Osborne, P. orcid.org/0000-0003-0180-3799, Routley, M. and Ilevbare, I. (2021) A hierarchical approach to technology roadmapping within an RTO environment. Research-Technology Management, 64 (3). pp. 58-67. ISSN 0895-6308

Oudshoorn, B.Y., Driscoll, H., Kilner, K. et al. (2 more authors) (2017) Prevalence of laceration injuries in professional and amateur rugby union: a systematic review and meta-analysis. BMJ Open Sport and Exercise Medicine , 3. e000239. ISSN 2055-7647

O’Neill, P. orcid.org/0009-0009-4453-2635, Mistry, R.K., Brown, A.J. et al. (1 more author) (2023) Protein-specific signal peptides for mammalian vector engineering. ACS Synthetic Biology, 12 (8). pp. 2339-2352. ISSN 2161-5063

Palmer, J.W., Ghadbeigi, H. orcid.org/0000-0001-6507-2353, Curtis, D. orcid.org/0000-0001-6402-6996 et al. (1 more author) (2018) An experimental study of the effects of dressing parameters on the topography of grinding wheels during roller dressing. Journal of Manufacturing Processes, 31. pp. 348-355. ISSN 1526-6125

Poyraz, O. orcid.org/0000-0001-9892-5738, Yasa, E. orcid.org/0000-0001-5443-3598, Tunc, L.T. et al. (1 more author) (2021) Parametric simulations for residual stresses and distortions of inconel 625 fabricated by laser powder bed fusion additive manufacturing. Journal of Additive Manufacturing Technologies, 1 (2). ISSN 2749-3229

Rose-Anderssen, C., Baldwin, J. and Ridgway, K. (2017) Manufacturing systematics and cladistics: state of the art and generic classification. Journal of Manufacturing Technology Management, 28 (5). pp. 655-685. ISSN 1741-038X

Salleh, S. orcid.org/0000-0001-9661-7125, Thokala, P., Brennan, A. et al. (2 more authors) (2017) Discrete Event Simulation-Based Resource Modelling in Health Technology Assessment. Pharmacoeconomics, 35. pp. 989-1006. ISSN 1170-7690

Sawyer, D. orcid.org/0009-0001-0056-2578, Tinkler, L. orcid.org/0000-0002-8275-3967, Roberts, N. et al. (1 more author) (2020) Improving robotic accuracy through iterative teaching. SAE Technical Papers, 2020 (March). 2020-01-0014. ISSN 0148-7191

Shi, V.G., Baines, T., Baldwin, J. et al. (5 more authors) (2017) Using gamification to transform the adoption of servitization. Industrial Marketing Management. ISSN 0019-8501

Tapoglou, N. orcid.org/0000-0001-9126-5407 (2019) Calculation of non-deformed chip and gear geometry in power skiving using a CAD-based simulation. International Journal of Advanced Manufacturing Technology, 100 (5-8). pp. 1779-1785. ISSN 0268-3768

Tapoglou, N., Clulow, J., Patterson, A. et al. (1 more author) (2022) Characterisation of mechanical properties of 15-5PH stainless steel manufactured through direct energy deposition. CIRP Journal of Manufacturing Science and Technology, 38. pp. 172-185. ISSN 1755-5817

Taylor, C.M. orcid.org/0000-0002-1325-7804, Secker, J. orcid.org/0000-0001-9545-9970, Sajid, S.A. et al. (3 more authors) (2023) Resource-efficient performance testing of metalworking fluids utilizing single-point milling. Tribology - Materials, Surfaces & Interfaces. ISSN 1751-5831

Taylor, C.M. orcid.org/0000-0002-1325-7804, Turner, S., Papatheou, E. et al. (1 more author) (2013) Modelling of segmentation-driven vibration in machining. The International Journal of Advanced Manufacturing Technology, 66 (1-4). pp. 207-219. ISSN 0268-3768

Watkins, M., Casamayor, J.L. orcid.org/0000-0001-8497-2947, Ramirez, M. et al. (3 more authors) (2021) Sustainable product design education: current practice. She Ji: The Journal of Design, Economics, and Innovation, 7 (4). pp. 611-637. ISSN 2405-8726

Woo, W.-S., Curtis, D. orcid.org/0000-0001-6402-6996, Bagni, C. et al. (3 more authors) (2022) Productivity enhancement of aircraft turbine disk using a two-step strategy based on tool-path planning and NC-code optimization. Metals, 12 (4). 567.

Yasa, E. orcid.org/0000-0001-5443-3598, Atik, İ and Kandemir, İ (2023) Material-specific phenomena and developing higher yield process parameters in laser powder bed fusion of 17-4 PH stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (1). 38. ISSN 1678-5878

Zhang, B. orcid.org/0000-0001-7327-0923, Lang, Z.Q., Billings, S.A. et al. (2 more authors) (2013) System identification methods for metal rubber devices. Mechanical Systems and Signal Processing, 39 (1-2). pp. 207-226. ISSN 0888-3270

Proceedings Paper

Akhtar, S., Wright, C.S., Youseffi, M. et al. (7 more authors) (2003) Direct selective laser sintering of tool steel powders to high density: part B – the effect on microstructural evolution. In: Proceedings of the Solid Freeform Fabrication Symposium. Solid Freeform Fabrication Symposium 2003, 04-06 Aug 2003, Austin, Texas, USA. University of Texas , Austin, Texas , pp. 656-667.

Berglind, L., Plakhotnik, D. and Ozturk, E. orcid.org/0000-0001-9982-2837 (2017) Discrete Cutting Force Model for 5-Axis Milling with Arbitrary Engagement and Feed Direction. In: Outeiro, J. and Poulachon, G., (eds.) Procedia CIRP. 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), 15-16 Jun 2017, Cluny, France. Elsevier , pp. 445-450.

Childs, T.H.C., Hauser, C., Taylor, C.M. orcid.org/0000-0002-1325-7804 et al. (1 more author) (2000) Simulation and experimental verification of crystalline polymer and direct metal selective laser sintering. In: Proceedings of 2000 International Solid Freeform Fabrication Symposium. Eleventh Solid Freeform Fabrication (SFF) Symposium, 08-10 Aug 2000, Austin, Texas, USA. University of Texas , Texas, USA , pp. 100-109.

Crawforth, P., Taylor, C.M. and Turner, S. (2016) The Influence of Alloy Chemistry on the Cutting Performance and Deformation Kinetics of Titanium Alloys During Turning. In: Procedia CIRP. 3rd CIRP Conference on Surface Integrity, 08-10 Jun 2016, Charlotte, NC, USA. Elsevier , pp. 151-154.

Duboust, N., Pinna, C., Ghadbeigi, H. et al. (4 more authors) (2017) 2D and 3D Finite Element models for the edge trimming of CFRP. In: Outeiro, J. and Poulachon, G., (eds.) Procedia CIRP. 16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO), June 15-16, 2017, Cluny, France. Elsevier , pp. 233-238.

EL-Dessouky, H.M. orcid.org/0000-0003-0715-5075, Liu, B., Saleh, M.N. et al. (1 more author) (2019) Co-woven carbon and nylon fibres for manufacturing thermoplastic composite plaques. In: Kerrigan, K., Mativenga, P. and El-Dessouky, H., (eds.) Procedia CIRP. 2nd CIRP Conference on Composite Material Parts Manufacturing, 10-11 Oct 2019, Advanced Manufacturing Research Centre, UK. Elsevier , pp. 272-276.

Hauser, C., Childs, T.H.C., Taylor, C.M. orcid.org/0000-0002-1325-7804 et al. (7 more authors) (2003) Direct selective laser sintering of tool steel powders to high density, Part A: Effects of laser beam width and scan strategy. In: Proceedings of the 2003 Solid Freeform Fabrication Symposium. 2003 Solid Freeform Fabrication Symposium, 04-06 Aug 2003, Austin, Texas, USA. University of Texas , Texas, USA , pp. 644-655.

Oyelola, O., Crawforth, P., M'Saoubi, R. et al. (1 more author) (2016) Machining of Additively Manufactured Parts: Implications for Surface Integrity. In: Procedia CIRP. 3rd CIRP Conference on Surface Integrity, June 8 – 10, 2016, Charlotte, North Carolina, USA. Elsevier , pp. 119-122.

Pisanelli, G., Tymczuk, M., Douthwaite, J.A. orcid.org/0000-0002-7149-0372 et al. (2 more authors) (2022) ROSIE: A ROS adapter for a modular digital twinning framework. In: Proceedings of 2022 31st IEEE International Conference on Robot and Human Interactive Communication (RO-MAN). 2022 31st IEEE International Conference on Robot and Human Interactive Communication (RO-MAN), 29 Aug - 02 Sep 2022, Napoli, Italy. Institute of Electrical and Electronics Engineers (IEEE) , pp. 1297-1304. ISBN 9781665406802

Sawyer, D. orcid.org/0009-0001-0056-2578 and Scraggs, C. (2024) Path following performance analysis for Siemens 840 D sl controlled robotic machining platforms with secondary encoders. In: SAE Technical Papers. SAE Aerotech 2024, 12-14 Mar 2024, Charlotte, NC, USA. Society of Automotive Engineers (SAE International) .

Shui, W., Maddock, S.C. orcid.org/0000-0003-3179-0263, Heywood, P. et al. (4 more authors) (2016) Using Semi-automatic 3D Scene Reconstruction to Create a Digital Medieval Charnel Chapel. In: Proceedings of EG UK Theory and Practice of Computer Graphics. Computer Graphics and Visual Computing (CGVC), 15 – 16 September 2016, Bournemouth University, United Kingdom. The Eurographics Association . ISBN 978-3-03868-022-2

Tapoglou, N. orcid.org/0000-0001-9126-5407, Lopez, M.I.A., Cook, I. et al. (1 more author) (2017) Investigation of the influence of CO2 cryogenic coolant application on tool wear. In: Procedia CIRP. 1st CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), June 8 - 9, 2017, Karlsruhe, Germany. Elsevier , pp. 745-749.

Taylor, C.M. orcid.org/0000-0002-1325-7804 and Childs, T.H.C. (2001) Thermal experiments in direct metal laser sintering. In: Proceedings of Euro RP 2001. Euro RP 2001, 07-08 Jun 2001, Paris, France. .

Taylor, C.M. orcid.org/0000-0002-1325-7804, Childs, T.H.C. and Hauser, C. (2002) Morphology of direct SLS-processed stainless steel layers. In: Proceedings of the 2002 International Solid Freeform Fabrication Symposium. 13th Solid Solid Freeform Fabrication Symposium, 05-07 Aug 2002, Austin, Texas, USA. University of Texas , Austin, Texas, USA , pp. 530-537.